Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Theses and Dissertations

Discipline
Institution
Keyword
Publication Year

Articles 8251 - 8280 of 11510

Full-Text Articles in Engineering

Energy Efficiency In Cold-Weather High-End Custom Homes, Joseph R. Kearl Dec 2007

Energy Efficiency In Cold-Weather High-End Custom Homes, Joseph R. Kearl

Theses and Dissertations

Nationally, there is increasing interest in energy efficient homes due to growing energy costs and increased awareness. However, many builders haven't yet incorporated energy saving products and practices into homes. Many builders don't have the resources to evaluate available options and prefer to rely on the experiences of other builders. The purpose of this study was to create energy efficiency benchmarks for cold-weather, high-end custom homes and evaluate current building practices. A list of energy-efficient products and practices was created through a review of relevant literature. A group of expert builders was formed into a committee to help determine energy …

Go to article

Sensitivity Of Half-Cell Potential Measurements To Properties Of Concrete Bridge Decks, Thad Marshall Pinkerton Dec 2007

Sensitivity Of Half-Cell Potential Measurements To Properties Of Concrete Bridge Decks, Thad Marshall Pinkerton

Theses and Dissertations

Half-cell potential testing has been recommended as a non-destructive method for assessing the corrosion potential of reinforcing steel in concrete bridge decks. The technique is particularly useful because it can be utilized to evaluate the probability of corrosion before damage is evident at the surface of a bridge deck. The specific objective of this research was to quantify the effects of age, chloride concentration, concrete cover thickness, spatial position, temperature, and presence or condition of epoxy coating on half-cell potential measurements of concrete bridge decks typical of those in Utah. The laboratory testing associated with this research followed a full-factorial …

Go to article

Dry Stacked Surface Bonded Masonry - Structural Testing And Evaluation, Eric B. Murray Dec 2007

Dry Stacked Surface Bonded Masonry - Structural Testing And Evaluation, Eric B. Murray

Theses and Dissertations

The ENDURA block system is a dry-stack surface-bonded masonry system. Typical masonry construction uses thin-set mortar in the bed joints to provide a bearing surface for the blocks while the ENDURA system typically relies on shims and a surface bonding coat to ensure that the wall is level and plumb and to provide stability. Typical ENDURA block walls are built with the reinforcement placed eccentrically in the walls. Testing was performed on ten walls in order to determine axial capacity. The walls were ten feet high by eight feet wide. Each of the walls was built using a different configuration …

Go to article

One-Dimensional Radial Flow Turbomachinery Performance Modeling, Robert John Pelton Dec 2007

One-Dimensional Radial Flow Turbomachinery Performance Modeling, Robert John Pelton

Theses and Dissertations

The Two-Element In Series (TEIS) and Two-Zone models have been used successfully for over twenty years to model test data for radial flow compressors and pumps. The models can also be used to predict the performance of new machines provided that the model inputs can be accurately specified. Unfortunately, use of the TEIS and Two-Zone models as a predictive tool has been limited because an accurate and broadly applicable method of predicting the modeling parameters, etaA, etaB, chi and d2p does not exist. Empirical models have been developed to predict the TEIS and Two-Zone modeling parameters based on a large …

Go to article

Optimizing Wireless Network Throughput: Methods And Applications, Pengchang Zhan Dec 2007

Optimizing Wireless Network Throughput: Methods And Applications, Pengchang Zhan

Theses and Dissertations

Ever since Marconi succeeded in his first demonstration on the possibility to communicate over the air overseas about a century ago, wireless communications have experienced dramatic improvements. Today's world sees the penetration of wireless communications into human life almost everywhere, from a simple remote control for TV to a cellular phone. With a better understanding of the adverse nature of the wireless propagation channels, engineers have been able to invent various clever techniques, i.e. Multiple Input Multiple Output (MIMO) technology, spread spectrum communications, Orthogonal Frequency Division Multiplexing (OFDM) to name a few, to achieve fast and reliable communications over each …

Go to article

Mexico Engineering Study Abroad: Assessing The Effectiveness Of International Experiences On Teaching Global Engineering Skills, Joshua Benjamin Draper Dec 2007

Mexico Engineering Study Abroad: Assessing The Effectiveness Of International Experiences On Teaching Global Engineering Skills, Joshua Benjamin Draper

Theses and Dissertations

Globalization is a rapidly increasing trend in many industries, including civil engineering. This paper defines the skills engineers will need in an increasingly international industry. It also describes an engineering study abroad program designed to teach some of those skills to students and presents a survey used as an assessment tool to evaluate the effectiveness of the program. The program, called Mexico Engineering Study Abroad (MESA), is taught at Brigham Young University (BYU) in Provo, UT. MESA is a project-based extended field trip format class that couples hydrologic modeling with cultural awareness as students work together with Mexican students on …

Go to article

Low-Altitude Road Following, Using Strap-Down Cameras On Miniature Aerial Vehicles, Joseph M. Egbert Nov 2007

Low-Altitude Road Following, Using Strap-Down Cameras On Miniature Aerial Vehicles, Joseph M. Egbert

Theses and Dissertations

Miniature air vehicles (MAVs) are particularly well suited for short-distance, over-the-horizon, low-altitude surveillance and reconnaissance tasks. New camera and battery technologies have greatly increased a MAVs potential for these tasks. This thesis focuses on aerial surveillance of borders and roads, where a strap-down camera is used in-the-loop to track a border or road pathway. It is assumed that quality tracking requires that the pathway always remain in the footprint of the camera. The objective of this thesis is to explore roll-angle and altitude-above-ground-level constraints imposed on a bank-to-turn MAV due to the requirement to keep the pathway in the footprint …

Go to article

Synthesis Of Optimal Arrays For Mimo And Diversity Systems, Britton T. Quist Nov 2007

Synthesis Of Optimal Arrays For Mimo And Diversity Systems, Britton T. Quist

Theses and Dissertations

This thesis proposes a method for determining the optimal antenna element radiation characteristics which maximize diversity gain given a specific power angular spectrum of the propagation environment. The method numerically constructs the eigenfunctions of the covariance operator for the scenario subject to constraints on the power radiated by each antenna as well as the level of supergain allowed in the solution. The optimal antenna characteristics are produced in terms of radiating current distributions along with their resulting radiation patterns. The results reveal that the optimal antennas can provide significantly more diversity gain than that provided by a simple practical design. …

Go to article

Low Loss Hybrid Waveguide Electric Field Sensor Based On Optical D-Fiber, Eric K. Johnson Nov 2007

Low Loss Hybrid Waveguide Electric Field Sensor Based On Optical D-Fiber, Eric K. Johnson

Theses and Dissertations

This thesis presents the fabrication of a low loss hybrid waveguide electric field(E-field) sensor based on optical D-fiber. This novel E-field sensor is formed as part of a contiguous fiber resulting in a flexible and small cross-section device that can be embedded into electronic circuitry. The in-fiber nature of this sensor also eliminates the need for alignment and packaging that conventional sensors need. An optical fiber can detect electric fields when the core of the fiber is partially removed and replaced with an electro-optic polymer. This polymer causes a change in the index of refraction in the waveguide of the …

Go to article

Space-Time Coding With Offset Modulations, N. Thomas Nelson Nov 2007

Space-Time Coding With Offset Modulations, N. Thomas Nelson

Theses and Dissertations

In this dissertation it is shown that the telemetry versions of Feher-patented QPSK (FQPSK-JR) and shaped offset QPSK (SOQPSK-TG) can be interpreted as both cross-correlated, trellis-coded quadrature modulation (XTCQM) and continuous phase modulation (CPM). Based on these representations, both modulations can be detected with near optimal bit error rate performance using a common detector that is formulated as either an XTCQM detector, a traditional CPM detector, or a pulse amplitude modulation (PAM) detector (due to the PAM decomposition of the CPM representations of these modulations). In addition it is shown that the complexity of the XTCQM detector for SOQPSK-TG can …

Go to article

Low-Voltage Analog Cmos Architectures And Design Methods, Kent Downing Layton Nov 2007

Low-Voltage Analog Cmos Architectures And Design Methods, Kent Downing Layton

Theses and Dissertations

This dissertation develops design methods and architectures which allow analog circuits to operate at VT + 2Vds,sat, the minimum supply for CMOS circuits with all transistors in the active region where Vds,sat is the drain to source saturation voltage of a MOS transistor. Techniques which meet this criteria for rail-to-rail input stages, gain enhancement stages, and output stages are discussed and developed. These techniques are used to design four fully-differential rail-to-rail amplifiers. The highest gain is shown to be attained using a drain voltage equalization (DVE) or active-bootstrapping technique which produces more than 100dB of gain in a two stage …

Go to article

Numerical Study Of Fully Developed Laminar And Turbulent Flow Through Microchannels With Longitudinal Microstructures, Kevin B. Jeffs Nov 2007

Numerical Study Of Fully Developed Laminar And Turbulent Flow Through Microchannels With Longitudinal Microstructures, Kevin B. Jeffs

Theses and Dissertations

Due to the increase of application in a number of emerging technologies, a growing amount of research has focused on the reduction of drag in microfluidic transport. A novel approach reported in the recent literature is to fabricate micro-ribs and cavities in the channel wall that are then treated with a hydrophobic coating. Such surfaces have been termed super- or ultrahydrophobic and the contact area between the flowing liquid and the solid wall is greatly reduced. Further, due to the scale of the micropatterned structures, the liquid is unable to wet the cavity and a liquid meniscus is formed between …

Go to article

Shear Modulus Degradation Of Liquefying Sand: Quantification And Modeling, Peter A. Olsen Nov 2007

Shear Modulus Degradation Of Liquefying Sand: Quantification And Modeling, Peter A. Olsen

Theses and Dissertations

A major concern for geotechnical engineers is the ability to predict how a soil will react to large ground motions produced by earthquakes. Of all the different types of soil, liquefiable soils present some of the greatest challenges. The ability to quantify the degradation of a soil's shear modulus as it undergoes liquefaction would help engineers design more reliably and economically. This thesis uses ground motions recorded by an array of downhole accelerometers on Port Island, Japan, during the 1995 Kobe Earthquake, to quantify the shear modulus of sand as it liquefies. It has been shown that the shear modulus …

Go to article

Piezo-Electrochemical Transducer Effect (Pect) Intercalated Graphite Micro-Electromechanical Actuators, Glen A. Kading Nov 2007

Piezo-Electrochemical Transducer Effect (Pect) Intercalated Graphite Micro-Electromechanical Actuators, Glen A. Kading

Theses and Dissertations

The purpose of this research is to investigate the Piezo-Electrochemical Transducer (PECT) effect in intercalated graphite as a possible mechanism of actuation for micro-electromechanical systems (MEMS). This dissertation presents the results of research into the PECT effect in H2SO4-intercalated graphitized carbon fibers, including both electrical and mechanical characteristics of this effect. PECT fibers achieve up to 1.7% strain at 1.4 V of applied potential. In contrast, the piezoelectric material polyvinylidene difluoride (PVDF) generates only 0.01% strain and polysilicon thermal expansion between 0.02 and 0.06% strain depending on the thermal conductivity of the particular polysilicon that the actuators are fabricated in. …

Go to article

Effect Of Beam Splicing On Seismic Response Of Buckling-Restrained Braced Frames, Gary S. Prinz Nov 2007

Effect Of Beam Splicing On Seismic Response Of Buckling-Restrained Braced Frames, Gary S. Prinz

Theses and Dissertations

The deformation capacity of typical buckling-restrained braced frames (BRBFs) is limited by the rotation capacity of connecting regions. The rotation capacity of the connection region is limited by fracture of the gusset welds and yielding in the beams and columns. A different connection detail with beam-splices outside the gusset has been shown to increase connection rotation capacity when compared to typical connections, in a few component tests. This study expands upon the performed component tests, by analyzing the beam splice connection at the system level under directional dynamic loads. Finite element analysis and dynamic loads are used to analyze two …

Go to article

Time Dependent Discrete Ordinates Neutron Transport Using Distribution Iteration In Xyz Geometry, James R. Dishaw Oct 2007

Time Dependent Discrete Ordinates Neutron Transport Using Distribution Iteration In Xyz Geometry, James R. Dishaw

Theses and Dissertations

The DI algorithm is an alternative to source iteration that, in our testing, does not require an accelerator. I developed a formal verification plan and executed it to verify the results produced by my code that implemented DI with the above features. A new, matrix albedo, boundary condition treatment was developed and implemented so that infinite-medium benchmarks could be included in the verification test suite. The DI algorithm was modified for parallel efficiency and the prior instability of the refinement sweep was corrected. The testing revealed that DI performed as well or faster than source iteration with DSA and that …

Go to article

Integrated Piezoresistive Sensing For Feedback Control Of Compliant Mems, Robert K. Messenger Oct 2007

Integrated Piezoresistive Sensing For Feedback Control Of Compliant Mems, Robert K. Messenger

Theses and Dissertations

Feedback control of MEMS devices has the potential to significantly improve device performance and reliability. One of the main obstacles to its broader use is the small number of on-chip sensing options available to MEMS designers. A method of using integrated piezoresistive sensing is proposed and demonstrated as another option. Integrated piezoresistive sensing utilizes the inherent piezoresistive property of polycrystalline silicon from which many MEMS devices are fabricated. As compliant MEMS structures flex to perform their functions, their resistance changes. That resistance change can be used to transduce the structures' deflection into an electrical signal. This dissertation addresses three topics …

Go to article

A Generalized Two-Dimensional Model To Reconstruct The Impact Phase In Automobile Collisions, Regis Agenor David Oct 2007

A Generalized Two-Dimensional Model To Reconstruct The Impact Phase In Automobile Collisions, Regis Agenor David

Theses and Dissertations

Automobile accident reconstruction has been facilitated by the development of computer based modules to allow evaluation of evidence gathered at the accident scenes. Although the computer modules are based in fundamental physical laws, an understanding of these laws by the user is required for proper application of the computer model in a given accident scenario. Vehicle collision analysis techniques generally separate the collision into three phases: pre-impact, impact, and post impact. The intent of the research is to provide a generalized model to reconstruct two dimensional impact problems in the area of accident reconstruction. There are currently two modeling techniques …

Go to article

Principles, Functions, And Concepts For Compliant Mechanically Reactive Armor Elements, Cameron S. Andersen Sep 2007

Principles, Functions, And Concepts For Compliant Mechanically Reactive Armor Elements, Cameron S. Andersen

Theses and Dissertations

There exists a great need for armor systems with greater mass efficiencies and ballistic limits. This thesis explores the development of a new field of armor capable of satisfying the increased demand for modern armor: Mechanically Reactive Armor or MRA. More specifically, the thesis focuses on Compliant MRA or CMRA. From the physics governing projectile-armor interactions, principles governing successful design of MRA are identified and presented. These principles or design approaches focus primarily on rejecting, minimizing, or absorbing the incoming projectile's kinetic energy. After identifying these principles, the specific mechanical functions required by the principles are isolated. These functions represent …

Go to article

Search Techniques For Multi-Objective Optimization Of Mixed Variable Systems Having Stochastic Responses, Jennifer G. Walston Sep 2007

Search Techniques For Multi-Objective Optimization Of Mixed Variable Systems Having Stochastic Responses, Jennifer G. Walston

Theses and Dissertations

A research approach is presented for solving stochastic, multi-objective optimization problems. First, the class of mesh adaptive direct search (MADS) algorithms for nonlinearly constrained optimization is extended to mixed variable problems. The resulting algorithm, MV-MADS, is then extended to stochastic problems (MVMADS-RS), via a ranking and selection procedure. Finally, a two-stage method is developed that combines the generalized pattern search/ranking and selection (MGPS-RS) algorithms for single-objective, mixed variable, stochastic problems with a multi-objective approach that makes use of interactive techniques for the specification of aspiration and reservation levels, scalarization functions, and multi-objective ranking and selection. A convergence analysis for the …

Go to article

Hybrid Micro-Electro-Mechanical Tunable Filter, Edward M. Ochoa Sep 2007

Hybrid Micro-Electro-Mechanical Tunable Filter, Edward M. Ochoa

Theses and Dissertations

While advantages such as good thermal stability and processing-chemical compatibilities exist for common monolithic-integrated micro-electro-mechanically tunable filters (MEM-TF) and MEM-tunable vertical cavity surface emitting lasers (MT-VCSEL), they often require full processing to determine device characteristics. Alternatively, the MEM actuators and the optical parts may be fabricated separately, then subsequently bonded. This "hybrid approach" potentially increases design flexibility. Since hybrid techniques allow integration of heterogeneous material systems, "best of breed" compound optoelectronic devices may be customized to enable materials groups to be optimized for tasks they are best suited. Thus, as a first step toward a hybrid (AlxGa1- …

Go to article

Numerical Simulation Of Vortex Generating Jets In Zero And Adverse Pressure Gradients, Curtis Lynn Memory Sep 2007

Numerical Simulation Of Vortex Generating Jets In Zero And Adverse Pressure Gradients, Curtis Lynn Memory

Theses and Dissertations

Numerical simulations of particle image velocimetry (PIV) experiments conducted with vortex generating jets (VGJs) on a flat plate, at a Reynolds number based on plate length of 50,000, were performed for three flow conditions using a time-accurate hybrid Navier-Stokes solver. Time-averaged steady blowing of angled jets, subjected to a zero pressure gradient, yielded excellent agreement with the PIV data in terms of vortex formation and strength. Observed flow features include primary and secondary vortices, where the primary vortex eventually dominates the downstream region. A shell wall structure, created by smaller vortical structures surrounding the developing vortices, was also observed. A …

Go to article

Final Assembly, Testing And Processing Of The Rigidizable Inflatable Get-Away-Special Experiment (Rigex) For Spaceflight Qualification, Jeremy J. Owens Sep 2007

Final Assembly, Testing And Processing Of The Rigidizable Inflatable Get-Away-Special Experiment (Rigex) For Spaceflight Qualification, Jeremy J. Owens

Theses and Dissertations

The purpose of this research is to complete the building, testing, verification, and qualification of the Rigidizable Inflatable Get-Away-Special Experiment (RIGEX) for spaceflight. The process of qualifying a payload for spaceflight is discussed, specifically addressing the issues of operability and survivability verification of a general payload. The spaceflight qualification process is then applied to the RIGEX payload at the Air Force Institute of Technology (AFIT) and at the Johnson Spaceflight Center (JSC) in Houston, TX, capstoning the work of 12 masters students and 3 summer interns that has already gone into the RIGEX project over the last 7 years. The …

Go to article

Radar System Characterization Extended To Hardware In The Loop Simulation For The Lab-Volt™ Training System, Oscar C. Mayhew Sep 2007

Radar System Characterization Extended To Hardware In The Loop Simulation For The Lab-Volt™ Training System, Oscar C. Mayhew

Theses and Dissertations

Modeling RADAR signals in software allows the testing of potential electronic counter measures and electronic counter counter measures without the associated RADAR hardware and test facilities. Performing a characterization process on a real world RADAR system reveals all imperfections within the system. The Lab-Volt™ RADAR system served as the characterized real world RADAR system. The characterization process consisted of measurements at selected front panel locations on the Lab-Volt™ transmitter module, antenna pedestal, receiver module, and dual channel sampler module. Due to the overwhelming influence of antenna parameters on a received signal, the characterization process also attempted to derive an antenna …

Go to article

Optimal Control Strategies For Constrained Relative Orbits, David J. Irvin Jr. Sep 2007

Optimal Control Strategies For Constrained Relative Orbits, David J. Irvin Jr.

Theses and Dissertations

The US Air Force's ability to protect space assets is enhanced by a proficiency in satellite proximity operations and Space Situational Awareness (SSA). In pursuit of that proficiency, this research develops a key capability of interest to mission planners; the ability of a deputy satellite to "hover" within a defined volume fixed in the vicinity of a chief satellite for an extended period of time. This research finds optimal trajectories, produced with discrete-thrusts, that minimize fuel spent per unit time and stay within the user-defined volume, thus providing a practical hover capability in the vicinity of the chief. The work …

Go to article

Raman Scattering Study Of Supercritical Bi-Component Mixtures Injected Into A Subcritical Environment, Young Man An Sep 2007

Raman Scattering Study Of Supercritical Bi-Component Mixtures Injected Into A Subcritical Environment, Young Man An

Theses and Dissertations

This research studies the species distribution profiles of methane/ethylene bi-components at downstream locations filled with subcritical nitrogen in a closed chamber. Unique thermodynamic and transport properties of supercritical fluids along with phase transition phenomena during fuel injection process can significantly change combustion characteristics inside a scramjet combustor. Plume properties of supercritical jets are of great interests to the studies of fuel/air mixing and subsequent combustion. The primary goal of this research is to help to clarify whether there is any preferential condensation within the condensed jets. The Raman Scattering technique is used to quantify spatial distribution of injected methane and …

Go to article

The Effects Of Signal And Image Compression Of Sar Data On Change Detection Algorithms, Kiran Shenoy Sep 2007

The Effects Of Signal And Image Compression Of Sar Data On Change Detection Algorithms, Kiran Shenoy

Theses and Dissertations

With massive amounts of SAR imagery and data being collected, the need for effective compression techniques is growing. One of the most popular applications for remote sensing is change detection, which compares two geo-registered images for changes in the scene. While lossless compression is needed for signal compression, the same is not often required for image compression. In almost every case the compression ratios are much higher in lossy compression making them more appealing when bandwidth and storage becomes an issue. This research analyzes different types of compression techniques that are adapted for SAR imagery, and tests these techniques with …

Go to article

Polarimeter Blind Deconvolution Using Image Diversity, David M. Strong Sep 2007

Polarimeter Blind Deconvolution Using Image Diversity, David M. Strong

Theses and Dissertations

This research presents an algorithm that improves the ability to view objects using an electro-optical imaging system with at least one polarization sensitive channel in addition to the primary channel. An innovative algorithm for detection and estimation of the defocus aberration present in an image is also developed. Using a known defocus aberration, an iterative polarimeter deconvolution algorithm is developed using a generalized expectation-maximization (GEM) model. The polarimeter deconvolution algorithm is extended to an iterative polarimeter multiframe blind deconvolution (PMFBD) algorithm with an unknown aberration. Using both simulated and laboratory images, the results of the new PMFBD algorithm clearly outperforms …

Go to article

Unreliable Retrial Queues In A Random Environment, James D. Cordeiro Jr. Sep 2007

Unreliable Retrial Queues In A Random Environment, James D. Cordeiro Jr.

Theses and Dissertations

This dissertation investigates stability conditions and approximate steady-state performance measures for unreliable, single-server retrial queues operating in a randomly evolving environment. In such systems, arriving customers that find the server busy or failed join a retrial queue from which they attempt to regain access to the server at random intervals. Such models are useful for the performance evaluation of communications and computer networks which are characterized by time-varying arrival, service and failure rates. To model this time-varying behavior, we study systems whose parameters are modulated by a finite Markov process. Two distinct cases are analyzed. The first considers systems with …

Go to article

Energy-Efficient Querying Of Wireless Sensor Networks, Christopher R. Mann Sep 2007

Energy-Efficient Querying Of Wireless Sensor Networks, Christopher R. Mann

Theses and Dissertations

Due to the distributed nature of information collection in wireless sensor networks and the inherent limitations of the component devices, the ability to store, locate, and retrieve data and services with minimum energy expenditure is a critical network function. Additionally, effective search protocols must scale efficiently and consume a minimum of network energy and memory reserves. A novel search protocol, the Trajectory-based Selective Broadcast Query protocol, is proposed. An analytical model of the protocol is derived, and an optimization model is formulated. Based on the results of analysis and simulation, the protocol is shown to reduce the expected total network …

Go to article

First Prev Next Last