Engineering Commons^™

Non-Destructive Evaluation Of Composites: Predictive Ultrasonic Guided-Waves Modeling, Non-Destructive Material Characterization, And The Application To Aerospace Structures, Darun Barazanchy

Theses and Dissertations

To predict guided wave dispersion curves, it is common to use different solution approaches depending on the material type (isotropic or anisotropic) of the medium in which the wave propagates. The two different solution methods are defined in different domains, frequency-phase velocity domain for isotropic materials and wavenumber-phase velocity domain for anisotropic materials. This may lead to difficulties and unsatisfying results when predicting the dispersion curves for hybrid laminates which contain both isotropic and anisotropic materials. Therefore, a unified formulation defined in the wavenumber-phase velocity domain to accomodate both isotropic and anisotropic materials, as well as hybrid combinations, is desired. …

Confluence Of Density Currents Produced By Lock-Exchange, Hassan Ismail

Theses and Dissertations

Density currents represent a broad classification of flows driven by the force of gravity acting on a fluid with variable density. With examples of density currents including turbidity currents, sand storms, salt wedges in tidal rivers, and oil spills, a great deal of attention has been previously given to understanding the underlying mechanisms of such flows and implications of those flows on fluid, species, and sediment transport. Although documented confluences occur naturally in terrestrial and submarine settings,little attention has been given to understanding the confluence of two density currents.

This study furthers the state of knowledge on density current confluences …

Computational Wave Field Modeling Using Sequential Mapping Of Poly-Crepitus Green’S Function In Anisotropic Media, Sajan Shrestha

Theses and Dissertations

In this thesis, a meshless semi-analytical computational method is presented to compute the ultrasonic wave field in the generalized anisotropic material while understanding the physics of wave propagation in detail. To understand the wave-damage interaction in an anisotropic material, it is neither feasible nor cost-effective to perform multiple experiments in the laboratory. Hence, recently the computational nondestructive evaluation (CNDE) received much attention to performing the NDE experiments in a virtual environment. In this thesis, a fundamental framework is constructed to perform the CNDE experiment of a thick composite specimen in a Pulse-Echo (PE) mode. To achieve the target, the following …

Evaluation Of Multicarrier Air Interfaces In The Presence Of Interference For L-Band And C-Band Air-Ground Communications, Hosseinali Jamal

Theses and Dissertations

The use of aeronautical vehicles and systems is continuously growing, and this means current aeronautical communication systems, particularly those operating in the very high frequency (VHF) aviation band, will suffer from severe congestion in some regions of the world. For example, it is estimated that air-to-ground (AG) communication traffic density will at least double by 2035 over that in 2012, based on the most-likely growth scenario for Europe. This traffic growth (worldwide) has led civil aviation authorities such as the FAA in the USA, and EuroControl in Europe, to jointly explore development of future communication infrastructures (FCI). According to international …

Modeling Of Tow Wrinkling In Automated Fiber Placement Based On Geometrical Considerations, Roudy Wehbe

Theses and Dissertations

Automated manufacturing of fiber reinforced composite structures via numerically controlled hardware yields parts with increased accuracy and repeatability as compared to hand-layup parts. Automated fiber placement (AFP) is one such process in which structures or parts are built by adding bands of prescribed number of tows or slit-tape with prescribed width using robotic machine heads over 3D surfaces following prescribed paths. Despite the improved accuracy, different types of defects or manufacturing features arise during fabrication. These defects can be due to geometrical features, materials, and process planning parameters and are detected in the form of wrinkling, tow twist, tow folding, …

Software Modelling For Real World Faults On Ac Transmission Protective Systems Analysis And Effects, Iandale Tualla

Theses and Dissertations

The Electric Power Utilities serves many diverse customers from regular households to major processing plants that develop parts for gasoline vehicles. Those varying customer usages has adverse effects on the Electric Grid in many ways, that requires continuing analysis by the engineers and technical skills specialists who keep the Electric Grid stable. Several papers have been written about harmonics and Non- Sinusoidal waveforms and its effect on the Electric Grid. This thesis will exam a realworld fault event on a transmission line, its effects on the AC Transmission Protection Systems (TPS) that provides electrical energy to a nonlinear load, specifically …

Product Qualification And Performance Assessment Of Hsrm Prestressed Concrete Railroad Ties Through Laboratory Testing, Ali Haider Abdulqader

Theses and Dissertations

This study focuses on the performance assessment of prestressed concrete railroad ties made of a newly developed High Strength Reduce Modulus (HSRM) concrete. The HSRM material has been developed by researchers at the University of South Carolina laboratories. The HSRM material was originally considered as a high-performance concrete for highway bridge girders, but it was rejected because it shows very low modulus of elasticity. A current project at USC proposed to use this HSRM material in prestressed concrete railroad ties. The experimental tests during the material development phase of the project showed that the HSRM-HPC has a reduced Modulus of …

Multi-Model Structural Analysis, Wesley Holt

Theses and Dissertations

The uncertainty in modeling earthquake loading is investigated through the comparison of various openSEES models. A series of models is created and the responses compared with each other as well as with a full scale shake table experiment. The openSEES models selected for comparison include two linear models, a nonlinear model using the Steel01 material for the entire cross section, and eight fiber models using reinforcing steel material and various concrete materials.

The models are subjected to a series of nine simulated earthquakes, matching the excitations applied to the shake table test. It is found that all of the models …

Improving Facial Action Unit Recognition Using Convolutional Neural Networks, Shizhong Han

Theses and Dissertations

Recognizing facial action units (AUs) from spontaneous facial expression is a challenging problem, because of subtle facial appearance changes, free head movements, occlusions, and limited AU-coded training data. Most recently, convolutional neural networks (CNNs) have shown promise on facial AU recognition. However, CNNs are often overfitted and do not generalize well to unseen subject due to limited AU-coded training images. In order to improve the performance of facial AU recognition, we developed two novel CNN frameworks, by substituting the traditional decision layer and convolutional layer with the incremental boosting layer and adaptive convolutional layer respectively, to recognize the AUs from …

Improved N-Type 4h-Sic Epitaxial Layer Radiation Detectors And Noise Analysis Of Front-End Readout Electronics, Khai V. Nguyen

Theses and Dissertations

Schottky barrier radiation detectors were fabricated on n-type 4H-SiC epitaxial layers (12 – 50 μm) grown by hot wall CVD process on highly nitrogen doped 4H-SiC (0001) substrates with 4-8º off-cut towards the ̅ direction. Ni/4H-SiC Schottky barrier radiation detectors, a very low leakage current of 0.18 nA at 250 V bias, revealing low thermal noise, was observed in current-voltage (I-V) measurements. Using a thermionic emission model, junction properties such as barrier height of ≥1.10 eV and an ideality factor of ≤1.29 were determined. An effective carrier concentration of 1.03×1015 cm-3 was calculated by capacitance-voltage (C-V) measurement. Deep level transient …

Progressive Failure Analysis Of Composite Materials Using The Puck Failure Criteria, Karan Kodagali

Theses and Dissertations

Fiber reinforced composites have been used in various engineering structures and applications especially in naval, automotive, aeronautical and sports industries. These composite materials generally exhibit brittle damage behavior. The anisotropy in the material and different kinds of failure mechanisms make it difficult to accurately characterize the behavior of composite materials. The present work aims to verify and apply the Puck Failure Criteria using the commercially available finite element package ABAQUS by writing a user-material subroutine in FORTRAN. The model is implemented with different post failure degradation schemes.

In the present work, the progressive failure on composite materials in analyzed using …

Investigate Genomic 3d Structure Using Deep Neural Network, Yan Zhang

Theses and Dissertations

The 3D structures of the chromosomes play fundamental roles in essential cellular functions, e.g., gene regulation, gene expression, evolution and Hi-C technique provides the interaction density between loci on chromosomes. In this dissertation, we developed multiple algorithms, focusing the deep learning approach, to study the Hi-C datasets and the genomic 3D structures.

Building 3D structure of the genome one of the most critical purpose of the Hi-C technique. Recently, several approaches have been developed to reconstruct the 3D model of the chromosomes from HiC data. However, all of the methods are based on a particular mathematical model and lack of …

Atherosclerotic Plaque Adhesion Strength And Its Role In Plaque Rupture, Bilal Merei

Theses and Dissertations

Cardiovascular diseases are disorders affecting the blood vessels and the heart. According to the World Health Organization, cardiovascular diseases are one of the leading causes of death worldwide. They are responsible for over 17.1 million deaths per year worldwide, representing 31.5% of deaths 1, 2. Atherosclerosis, a chronic inflammatory disorder affecting large arteries, is the underlying cause of many cardiovascular diseases. Plaque rupture is a serious complication of advanced atherosclerosis, often leading to life-threatening clinical consequences such as myocardial infarction (heart attack) or stroke. 75% of newly developed myocardial infarction cases are caused by atherosclerotic plaque rupture. It affects approximately …

Ultrathin Graphene Oxide Membranes For Water Purification: Fundamentals & Potential Applications, Weiwei Xu

Theses and Dissertations

To develop ultrathin GO membranes with both high permeation rate and excellent selectivity, it is essential to understand the interlayer nanostructure and its influence on water purification performance. We purposely deposited GO at a fast rate and at a rate ~12 times slower to control the interlayer nanostructure of the resulting membranes. The d-spacing difference between proposed thermodynamically favored interlayer structure which formed at slow deposition rate and another relative randomly packed interlayer structure formed at fast deposition rate were corroborated by XRD, organic vapor deposition, and AFM. Molecular dynamics simulations further confirmed that, in type I structure, functionalized patches …

Underwater Cave Mapping And Reconstruction Using Stereo Vision, Nicholas Weidner

Theses and Dissertations

This work presents a systematic approach for 3-D mapping and reconstruction of underwater caves. Exploration of underwater caves is very important for furthering our understanding of hydrogeology, managing efficiently water resources, and advancing our knowledge in marine archaeology. Underwater cave exploration by human divers however, is a tedious, labor intensive, extremely dangerous operation, and requires highly skilled people. As such, it is an excellent fit for robotic technology. The proposed solution employs a stereo camera and a video-light. The approach utilizes the intersection of the cone of video-light with the cave boundaries resulting in the construction of a wire frame …

Improving Peptide Identification By Considering Ordered Amino Acid Usage, Ahmed Al-Qurri

Theses and Dissertations

Proteomics has made major progress in recent years after the sequencing of the genomes of a substantial number of organisms. A typical method for identifying peptides uses a database of peptides identified using tandem mass spectrometry (MS/MS). The profile of accurate mass and elution time (AMT) for peptides that need to be identified will be compared with this database. Restricting the search to those peptides detectable by MS will reduce processing time and more importantly increase accuracy. In addition, there are significant impacts for clinical studies. Proteotypic peptides are those peptides in a protein sequence that are most likely to …

Landfill Elevated Internal Temperature Detection And Landfill Fire Index Assessment For Fire Monitoring, Aurora Musilli

Theses and Dissertations

Landfill fires are becoming a real threat to both people and environment due to lack of predictions and control methods. Processing of the infrared band from level-1 satellite images was employed and decades worth of archived data from USGS Earth Explorer databases were analyzed to obtain surface temperature values of Atlantic Waste Landfill, Virginia and Bridgeton Landfill, Missouri. Multitemporal thermal maps and frequency of maxima analysis maps of these two landfills showed the hotspots spreading through the waste site. A Landfill Fire Index (LFI) was created by investigating eight factors that give information about the hazardousness of the landfill conditions …

Integrated Circuit Wear-Out Prediction And Recycling Detection Using Radio-Frequency Distinct Native Attribute Features, Randall D. Deppensmith

Theses and Dissertations

Radio Frequency Distinct Native Attribute (RF-DNA) has shown promise for detecting differences in Integrated Circuits(IC) using features extracted from a devices Unintentional Radio Emissions (URE). This ability of RF-DNA relies upon process variation imparted to a semiconductor device during manufacturing. However, internal components in modern ICs electronically age and wear out over their operational lifetime. RF-DNA techniques are adopted from prior work and applied to MSP430 URE to address the following research goals: 1) Does device wear-out impact RF-DNA device discriminability?, 2) Can device age be continuously estimated by monitoring changes in RF-DNA features?, and 3) Can device age state …

Spacex: Breaking The Barrier To The Space Launch Vehicle Industry, Matthew M. Liskowcyz

Theses and Dissertations

The Space Launch Vehicle (SLV) industry has been around for a long time, but few companies have managed to enter this industry. SpaceX was founded only 10 years ago, but it has managed to become a leader in the U.S. industry and a dominant player worldwide. The purpose of this thesis research is to discover what it took for SpaceX to break into this tightly controlled industry. A qualitative analysis was performed to compare SpaceX to companies that overcame the barriers of entry for their respective industries. SpaceX, like FedEx, could implement a unique technique to the industry and find …

Design And Frequency Characterization Of Dual-Piezoresponsive Foam Sensors, Cory Nelson Newton

Theses and Dissertations

Multifunctional "self-sensing" materials at the frontiers of current research are generally designed to gather only a single type of information (such as quasi-static strain data). This project introduces a new sensor that is both multifunctional and dual-response, indicating its ability to not only perform in mechanical and sensing functions but also in its ability to sense multiple types of response. The proposed new class of sensing materials, comprised of nanocomposite polymer foams, exhibits measurable piezoresistive and quasi-piezoelectric phenomena in the form of change in resistance and voltage generation in response to deformation, respectively. An initial sampling of the envelope of …

Improvements To Micro-Contact Performance And Reliability, Tod V. Laurvick

Theses and Dissertations

Microelectromechanical Systems (MEMS) based devices, and specifically microswitches, continue to offer many advantages over competing technologies. To realize the benefits of micro-switches, improvements must be made to address performance and reliability shortfalls which have long been an issue with this application. To improve the performance of these devices, the micro-contacts used in this technology must be understood to allow for design improvements, and offer a means for testing to validate this technology and determine when such improvements are ready for operational environments. To build devices which are more robust and capable of continued operation after billions of cycles requires that …

Simulation Of Aircraft Sortie Generation Under An Autonomic Logistics System, Gunduz Bingol

Theses and Dissertations

Parallel to the developments in diagnostic and prognostic technology, autonomic logistics systems (ALS) have been a potential improvement for the aircraft sortie generation process. Currently, Lockheed Martin and the Joint Program Office are developing a new autonomic logistics system for the multibillion F-35 Lightning Joint Strike Fighter project, which is named the Autonomic Logistics Information System (ALIS). Generally, researchers make an analogy between the ALS and the human bodys autonomic nervous system since both of them monitor, control, and adjust autonomic responses to external stimuli. Based on this perspective, ALS aims to switch the Air Force logistics mentality from a …

Flow Field Dynamics In A High-G Ultra-Compact Combustor, Andrew E. Cottle

Theses and Dissertations

The Ultra Compact Combustor (UCC) presents a novel solution to the advancement of aircraft gas turbine engine performance. A high-g UCC design operates by diverting a portion of the axial compressor flow into a circumferential combustion cavity positioned about the engine outer diameter. The circumferential cavity (CC) provides the necessary residence length and time for combustion within reduced axial lengths; furthermore, high rates of centrifugal acceleration termed high-g loading are imposed upon the swirling cavity flow. These high-g conditions are hypothesized to increase flame speed, reduce flame length, and improve lean blow-out performance. Work at AFIT was sponsored by the …

Consumer Perceptions About Pilot Training: An Emotional Response., Timothy G. Rosser

Theses and Dissertations

Civilian pilot training has followed a traditional path for several decades. With a potential pilot shortage approaching, ICAO proposed a new paradigm in pilot training methodology called the Multi-Crew Pilot License. This new methodology puts a pilot in the cockpit of an airliner with significantly less flight time experience than the traditional methodology. The purpose of this study was to determine to what extent gender, country of origin and pilot training methodology effect an aviation consumer’s willingness to fly. Additionally, this study attempted to determine what emotions mediate a consumer’s decision. This study surveyed participants from India and the United …

An Examination Of How Ratings Of Airlines Are Effected By Different Types Of Information: A Mediation Analysis, Abdullah Selim Ozyurek

Theses and Dissertations

Many dynamics directly or indirectly influence the decision-making process. An individual’s demographic features, such as gender, country of origin, and emotions are some of the dynamics. In the aviation domain, air passengers purchase their air travel tickets under those dynamics. The purpose of this study was to determine if the airline type, gender of participants, and participants’ country of origin had an effect on ratings of an individual’s perception of safety and willingness to fly, and which emotions had a mediating effect on this relationship. The study included Lufthansa Airlines and Turkish Airlines from Europe. The affect was the participants’ …

Feasibility Of Friction Stir Processing (Fsp) As A Method Of Healing Cracks In Irradiated 304l Stainless Steels, Cameron Cornelius Gunter

Theses and Dissertations

The current US fleet of nuclear reactors has been in service for three decades. Over this period, existing welds in stainless steel (SS) shrouds have sustained stress corrosion cracking (SCC) and are in need of repair. Additionally, helium has formed interstitially as a byproduct of proton bombardment. Current repair technology, such as TIG welding, puts extreme amounts of heat into the material and allows for interstitial helium atoms to aggregate and form bubbles/voids at grain boundaries. This significantly weakens the material, proving to be a very counterproductive and ineffective repair technique. Much study has been done on friction stir processing …

Development Of A Performance-Based Procedure For Assessment Of Liquefaction-Induced Free-Field Settlements, Brian David Peterson

Theses and Dissertations

Liquefaction-induced settlement can cause significant damage to structures and infrastructure in the wake of a seismic event. Predicting settlement is an essential component of a comprehensive seismic design. The inherent uncertainty associated with seismic events makes the accurate prediction of settlement difficult. While several methods of assessing seismic hazards exist, perhaps the most promising is performance-based earthquake engineering, a framework presented by the Pacific Earthquake Engineering Research (PEER) Center. The PEER framework incorporates probability theory to generate a comprehensive seismic hazard analysis. Two settlement estimation methods are incorporated into the PEER framework to create a fully probabilistic settlement estimation procedure. …

Submerged Jump Remediation At Low-Head Dams: The Multiple Staggered Deflector Design, Ronald Francis Mcghin

Theses and Dissertations

Low-head dams are capable of creating dangerous counter-currents just downstream from the structure. These dangerous counter-currents are known as submerged hydraulic jumps and are responsible for hundreds of fatalities at numerous low-head dams across the United States. The counter-current creates high upstream-directed surface velocities across the width of the channel, making it nearly impossible for an individual to escape. This submerged jump can occur during a range of upstream and downstream conditions. Effective, safe and low-cost remediation options must be explored in order to prevent further fatalities at these structures. This document explores such a remediation option: the Multiple Staggered …

Comparison Of Simulation And Hands-On Labs In Helping High School Students Learn Physics Concepts, Matthew Charles Rytting

Theses and Dissertations

The purpose of the research was to determine whether PhET simulation labs or hands-on labs were more effective in helping students learn physics concepts. This measure was done by comparing quiz scores using recall, calculation, and transfer questions. Additionally, student perceptions of learning from both hands-on and simulation lab experiences were measured. Six labs were conducted with high school physics students on the topics of momentum, energy, circuits, angular momentum, pendulums, and friction. It was found that PhET simulation labs were as effective at creating student understanding, and sometimes more effective, as measured by quizzes given after the labs. Additionally, …

Voltage Measurement Using Slab-Coupled Optical Sensors With Polarization-Maintaining And Absorption-Reduction Fiber, Rex Lavell King

Theses and Dissertations

This research presents the first use of side-polished Panda fiber in the fabrication of slab-coupled optical sensors (SCOS). It is determined that the Panda SCOS provides a sensor that is comparable to the D-fiber SCOS in cases of electric field sensing. It exhibits greater power transfer and higher bandwidth than a typical D-SCOS. The Panda SCOS is also less costly and easier to splice than the D-fiber alternative. This comes at a cost of slightly decreased sensitivity and a more fragile fabrication process. This research also demonstrates the use of the Panda-SCOS as means of voltage characterization across both the …