Engineering Commons^™

Development Of A Computer Model To Track Water Droplet Trajectories As Related To Aircraft Icing, Satyen G. Harve

Theses

In order to be able to predict the local ice accretion rate, or the icing profile on any surface it is neccessary that a model be available, which helps in determining the local impingement values of water droplets on the object. Two models have been developed. One model determines the potential and the velocity field around any arbitrary object. The second model determines the trajectory of the water droplets in the presence of a potential field. The two models have been combined to form a general trajectory model capable of tracking water droplet trajectories around any arbitrary object. The object …

Enhancement Of The Integrated Mechanisms Program (Imp) By Addition Of Graphic Output, Anil Parsaram Hingorani

Theses

The Integrated Mechanisms Program (IMP) is enhanced to include the capability of graphic output of simple mechanisms. The subroutines available in the graphics package GP-10 are used. The output consists of a drawing of the mechanism at its initial position and for every position for which the analysis is done. In addition, a graph of velocity and/or acceleration against the angle of the driving link may be plotted. There are limitations. The output of the mechanism represents only prismatic joints by a different symbol. It is represented by a rectangle and the symbol of the fixed link. All the other …

Optimization Of The Sputtering Technology For Preparation Of Hg1-[Subscript X] Cd[Subscript X] Te Heterojunction Diodes, Kyriacos Kokkinos

Theses

The deposition of (Hg_1-xCd_x)Te onto Si and (Hg_1-yCd_y)Te (x>y) substrates by rf triode sputtering was studied. Ionized mercury vapor, in the 0.6 to 1.2 micron pressure range, was used to bombard pressed-powder targets, consisting of HgTe and CdTe particles, with effective target x value of 0.3, 0.35, and 0.4. The sputtering procedure, parameters, and system were modified to optimize film characteristics. Higher substrate temperature (270°C) was required to obtain metallic gray films with x>0.3. With substrate temperatures less than 270°C and deposition rates 0.5-1.0 micron per hour the films were …

A Method For The Identification Of Parameters In Nonlinear Time-Varying Discrete Systems, Somo Coulibaly

Theses

The purpose of this thesis is to present a new technique for estimating the unknown parameters of nonlinear discrete time-varying systems.

The method is based on the model-reference control system where the model and the plant are controlled to exhibit the same output trajectory. The model is chosen to be linear and stationary. To develop the procedure of identification we assume that the structure of the nonlinear system is known and all the measurements are free of noise. A feedback input is adapted to improve the scheme. This scheme can be used to simultaneously identify the parameters when the control …

Computer Aided Design Of Optimum Structures, Sanjay M. Alexander

Theses

Techniques for the improvement of procedures for large scale structural synthesis are investigated. Considerable amount of research has been devoted to structural optimization. Yet as developments continue in this area, constant improvements in structural analysis methods, most of which are computationally demanding, tax the ability of existing optimization procedures to use the most powerful of the new analysis techniques effectively. This thesis presents optimization of structures modeled by classical discretized finite elements using the direct stiffness approach. The technioue presented here utilizes a Mathematical Programming (MP) method, which is based on Zoutendijk's feasible Direction Finding Problem (DFP). Modifications on Zoutendijk's …

Stability Of Bicomponet Polymeric Liquids In Poiseuille Flow, Chin-Chang Jeng

Theses

Polymer processing, involving two or more components, has become more popular recently in industrial plants. However, product Quality is affected very much by the fluid stability. Some theoretical and experimental results concerning Newtonian and non-Newtonian flow in rectangular coordinates, have been published, and the fluid-fluid interfaces were observed to be unstable by some researchers.

In this paper, the linear stability of bicomponent non-Newtonian fluids flowing in a cylindrical tube was investigated by using the Ellis model. Only the very long wave and the axisymmetric disturbances were considered. The Ellis zero-shear-rate viscosity ratio, m( = η02 / η01 )destabilizing. The half-zero-shear-rate-viscosity …

Simulation Of Particle Size Distribution In Continuous Emulsion Polymerization Through A Modified Population Balance Approach, Ying-Yuh Lu

Theses

A detailed mathematical model for particle size distribution in continuous emulsion polymerization of styrene and vinyl acetate is proposed on the basis of the population balance in the presence of several kinetic and mass transfer processes. This study is limited to the Smith-Ewart case II, which assumes instantaneous free radical termination within polymer particles. Radical desorption mechanism from polymer particles is included in the model and the desorption rate is formulated from the diffusion theory which suggests that the rate coefficient should be inversely proportional to the surface area of polymer particles.

Finite Element Modeling Of A Femoral Stem In A Total Hip Prosthesis, Robert C. Cohen

Theses

A three-dimensional model was produced to study of effects of stress on a femoral stem in a total hip prosthesis. Using the ANSYS General Purpose Finite Element Computer Program, a reproduction of the system was constructed for the loads acting on the hip joint at intervals of a walking cycle. With isotropic properties for cortical bone, cancellous bone, cement, and selected alloys, the model was generated using three-dimensional, isoparametric, eight-node, solid elements (STIF45). The model consists of over 700 nodes and 442 elements. This model can be used to produce computer calculated stress data, if disc storage space allows.

On Analysis Of Small Bore Piping Vibrations, Nitinkumar Shroff

Theses

This thesis investigates the natural frequency and vibration induced stress of small bore power plant piping. Straight piping and piping with concentrated load, such as a valve, located anywhere along the span are studied. Four different boundary conditions of fixed-free, simple-fixed, fixed-fixed and simple-simple are investigated, as any single span piping may be approximated by one of these boundary conditions.

The results otained [sic] for frequency and stress coefficients in the case of straight piping are plotted. Plots of frequency factor and stress ratio for the piping with concentrated load are also presented.

The results obtained for the natural frequencies …

The Manhattan Project Legacy : Low Level Radioactive Waste Health Effects, An Epidemiological Study, Lisa Fetterman Voyce

Theses

An epidemiological survey was performed that included the area surrounding a former Department of Energy thorium processing and disposal facility. This facility processed monazite sands to obtain thorium under Federal Government contracts from 1941-1973.

New Jersey Department of Environmental Protection radiological surveys had shown elevated radiation levels at the Site and in the vicinity of the plant. The area was divided into sections according to distance from the site and from Sheffield Brook, which is also contaminated. Questionnaires were mailed to 400 families, with 112 responses. These represent 362 people.

Statistical analysis of the accumulated data regarding lifestyle, occupation, reproductive …

Reliability Studies On Solid Tantalum Electrolytic Capacitors, Hamed Nassar

Theses

The primary objective of this thesis is to determine and analyze the failure mechanisms of solid tantalum capacitors, pinpoint the causes, and suggest the precautionary measures that prevent the occurrence of these failures. To achieve this goal, the study went in two directions, theoretical and experimental. The theoretical part-is a comprehensive review of the work -done on tantalum capacitors since 1960 up to date.

The experimental part of the study is a life test (1000 hours) of solid tantalum capacitors under humidity and high temperature. To avoid the misconception that could happen by investigating a particular manufacturer's product, units from …

Behavior Of Thin-Walled Channel Shaped Reinforced Concrete Columns Under Combined Biaxial Bending And Compression, Subash Yalamarthy

Theses

Next to rectangular, circular and L shapes, Channel section may be the most frequently encountered reinforced concrete columns since they can be used as box wall for elevators. Nevertheless, information about the load deformation behavior is not generally available to structural engineers. Most of the investigations have been emphasized on the ultimate strength of column sections under combined biaxial bending and axial compression and the resulting interaction surface. No attention is paid to load deformation behavior.

Current code provisions do not provide adequate guidelines for assessing the strength and ductility of biaxially-loaded reinforced concrete columns. Therefore, this investigation is aimed …

Analysis Of Selected Volatile Organic Substances Associated With Residential Kerosene Heater Use And The Health Implications, Catherine Coombs Bobenhausen

Theses

Volatile organic species (aliphatic hydrocarbons from hexane to dodecane, cyclohexane and aromatic species including benzene, toluene, ethyl benzene, m,p, and o—xylenes, nitrobenzene, styrene and naphthalene) associated with residential kerosene heater emissions were measured at two sites. One was a small room having a total volume of 23.66 cubic meters and an air change rate of 2.71 air changes per hour, and the other, a living/dining room area having a combined volume of 79.30 cubic meters and an estimated air change rate of .7 air changes per hour. The analytical procedure involved collection of a series of air samples in stainless …

Prediction Of Enthalpies Of Mixing With A Unifac Model, Dinh Dang

Theses

A modified UNIFAC model is used in the correlation and prediction of enthalpies of mixing. The model requires two interaction parameters per group pair and values for 172 such pairs are presented here. Excellent prediction results are obtained with typical errors, in the temperature range of 273°K to 400°K, below 15%. For systems containing cyclic compounds, somewhat poorer results may be encountered.

Three Studies On Airborne Polycyclic Aromatic Hydrocarbons, Carol Sophia Eveleens

Theses

Three studies have been conducted on polycyclic aromatic hydrocarbons found on airborne particulate matter. The first investigation involves the determination of fly ash "activity" in the reaction of two PAHs adsorbed on its surface. Mass spectrometry is used to monitor the exchange of hydrogen and deuterium atoms between anthracene and anthracene-d10. The results indicate that some fly ashes exhibit "activity" in the reactions of PAHs adsorbed on its surface. The second investigation involves the determination of cyclopenta[cd]pyrene (CcdP) and benzo[ghi]flouranthene (BghiF) on samples of airborne particulate material collected from two automobile traffic tunnels. Glass capillary gas chromatography with a precolumn …

Calibration Of Flame Ionization Detector For Chlorinated Hydrocarbons, Nahid Jabalameli

Theses

Relative Responses and Calibration Factors were developed for several volatile organic (mostly chlorinated) priority pollutant species in order to use one single stable compound (e.g.Benzene) for daily instrument calibration. This would replace the procedure of using a standard mixture of target compounds (25-35). This is of particular advantage because the standard mixture may not have all species stable or may show loss of some components relative to others due to wall adsorption in the standard (compressed gas) stainless steel cylinder.

The use of a single standard species was made possible by developing "accurate" relative response and calibration factors of all …

Investigations Into Rates And Mechanisms Of Mercury Depuration In The Killifish, Fundulus Heteroclitus, Joanne A. Korpanty

Theses

Metallothionein (MT) and glutathione (GSH) have been shown in mammalian research to play a role in the sequestration and depuration of mercury. The sulfhydryl groups on both these peptides have a strong affinity for mercury, MT for Hg²⁺ and GSH for CH₃Hg⁺. In this study, killifish (Fundulus heteroclitus) were force-fed one piece of squid laced with labelled mercuric nitrate to give a final food concentration of 20 ppm ²⁰³Hg²⁺ and 0.03 -0.05 µg g-1 Hg²⁺ total dose. Most of the mercury, 84.1 ± 12.1% (mean ± standard deviation), is depurated within the …

Characterization Of Tdi-Hema Homopolymer Prepared Via An Immiscible Solvent System. Synthesis And Investigation Of Oligodichloroketene, Manuel Montero

Theses

The objective of this thesis has been divided in two parts.

The first part is subdivided into two areas. First a "Universal" calibration curve for gel permeation chromatography (GPC) was construc-ted using different molecular weight standards of PMMA and MMA-HEMA co-polymers. By measuring the viscosity of the different molecular weight solutions and calculating the Vr, (retention volume), from GPC data, plots of In [ η ] Mw against Vr and In Mw against Vr are obtained. These curves can be used to obtain the molecular weight of any linear (not crosslinked) copolymer by simple measurements of viscosity and GPC data. …

A Study Of Worker Motivation, Farid Uddin Ahmad

Theses

This thesis mainly deals with the motivation of the production managers, engineers, technicians and production workers. The purpose is to emphasize the need for providing due motivations to an important work group of the industry who are largely ignored. An attempt has been made to amply demonstrate the various techniques for worker motivation. As the study of standard motivational theories alone cannot solve the complex motivational problems, all possible efforts have been made to relate, integrate and blend the theories with actual applications in the organizations. All the relevant and important issues connected with worker motivation have been highlighted. Points …

The Effects Of Heavy Metals On The Chick Embryo Development, Yasmin Alibhai

Theses

The following is a research report on the effects of heavy metals on the avian embryo. A total of eight metals were used in the study. The metalE included were : cobalt, copper, indium, iron, manganese, molybdenum, arsenic and cadmium. A total of 800 eggs were used for the study. Salts of each of the metal were dissolved in physiological saline and injected into the air sacs of white Leghorn chick eggs. Dose levels varied with the metal to be tested. Control eggs were injected with an equivalent volume of saline (0.1 ml per egg). The eggs were injected on …

Microcomputer Applications In Construction Layout, P. Emeruwa Anyanwu

Theses

With recent trends in computer technology, its application to the construction industry is attracting more attention. The cost of owning computer was a primary reason for small and medium sized firms not adopting its use. With the advent of micro and minicomputers, the cost have dropped dramatically. Now one can purchase an Apple Computer (the monitor, keyboard, disk drive, and printer) at less than $3,000. This makes it possible for students like me (the poverty class) to afford to own one.

This thesis explores the powerful potentials of the microcomputer and its use as an aid in construction layout. Surveying …

Energy And Economic Analysis Of Alternate Total Energy Systems, Swaminathan Balakrishnan

Theses

The purpose of this study is to evaluate the Performance of Diesel engines, gas engines, and gas turbines when used in a Total Energy System. To begin with, the history of cogeneration was studied, current literature and texts reviewed and companies which deal with these engines or turbines were contacted. Electricity and gas tariffs were obtained from the P.S.E.&G. Co. It was decided to consider an apartment complex of approximately 200,000 ft² having peak heating and cooling loads of approximately 4.92 million Btu/hr and 2.93 million Btu/hr respectively for this analysis. The average electrical demand was 520 KW. Next …

Volatile Organic Pollutant Levels In Indoor Environments From The Use Of Kerosene Heaters, Kashinath Banerjee

Theses

The indoor air pollutant levels caused by use of kerosene stoves as sources of heat in residences is of increasing concern as the use of such heaters becomes more widespread. Emission of volatile organic. species (aliphatic hydrocarbons from hexane to dodecane, cyclohexane and aromatic species including benzene, toluene, ethyl benzene, m/p xylenes, o-xylene and styrene) from these devices were measured at different sites. The organic vapor samples have been collected by adsorption on Tenax GC, and quantitatively analyzed by thermal desorption into a high Resolution capillary column gas chromatograph. Mass spectral analysis was also conducted for qualitative identification of sample …

Successful Management Techniques For Introduction Of Computerized Systems In A Production Facility, Michael James Boyle

Theses

This thesis surveys the potential for introducing significant organizational change into a manufacturing environment which is undergoing large scale capital improvement.

The first portion describes both the organizational and technological barriers present at a specific manufacturing facility. The capabilities of a computer based process control system are detailed along with its ability to fulfill the employer's particular business needs.

The next portion details the work necessary to train both management and production operators, not only on how to use this computer based equipment, but also how they themselves must change their personal modes of thinking in order to carry out …

Risk Assessment For New Products In Office Automation, Dolores Ann Canale

Theses

As investors survey the industrial growth of technology for the late 1980's one area leading the range for large potential growth is the area of office automation. Though this area has been under heavy speculation by many large firms (such as IBM, AT&T and EXXON) for the pass ten years it still remains an unexplored market for many investors. The objective of this research paper is to study the risks companies. will face developing products for this horizon.

Investors believe that success in this area, as well as, many other areas of engineering rely in large measure on the willingness …

Deposition Of Suspension In Inclined Channels Due To The Effects Of Inertia, Gravity And Image Force, I-Hsi Chu

Theses

This investigation was made to determine the effect on the deposition of particle in an inclined parallel-plate channel due to the influences of image charge, viscosity, inertia and gravity. The flow considered was lamina, imcompressible and steady. The flow patterns considered were uniform and fully developed with symmetry about the axis of the channel.

The governing equations derived for a particle were based on Newton's Second Law of motion. Since the resulting governing equations are linear second order differential equations, Runge-Kutta algorithm is used to solve the problem and graphical techniques is used to interpret the results of the numerical …

Microcomputer Controlled Instrumentation System For Studies Of Metabolic Changes In Rats, Murat Dertlioglu

Theses

The system measures the respiratory exchange in rats in a controlled experiment. An interface unit provides data, received from several measurement instruments such as gas analyzers, an electronic flowmeters, electronic thermometer and an electronic hygrometer, to the computer. The data is gathered from different chambers in a multiplexed mode.

The computer samples the chambers sequentially and prints out the results and stores them on the disk. The sampling duration of each chamber and the number of the rats to be tested can be programmed. The system can perform experiments with twelve animals, in the following arrangments, either one group of …

Computer Based Instrumentation System For Measurement Of Cardiac Output In Small Animals, Prasad L. Gavaskar

Theses

The task of the instrumentation system is to measure cardiac output in animals like rats, dogs, etc. A thermal-dilution method is used for this purpose. The temperature change due to injection of saline is picked up by thermo-couple microprobes implanted in the blood-vessel. The signal after conditioning is fed to a data acquisition system controlled by a computer.

With the help of a computer it is thus possible to monitor and control an experiment on several animals. The computer can sample the chambers sequentially. The sampling cycle duration and frequency are programmable. The data is collected and processed to determine …

Automated Instrumentation System To Monitor Behavioral Experiments, Dilip S. Gokhale

Theses

An instrumentation system has been designed to monitor behavioral experiments on monkeys. This instrumentation system is capable of performing these experiments in an automated manner without any human intervention. It is capable of monitoring these experiments concurrently in six boxes. It exhibits several features that make it more versatile than previous instrumentation systems. It is also capable of storing the data generated on to a floppy disk and later transmitting it to the mainframe.

Another feature that makes it more versatile is the flexibility of the system. Presently it is configured to run experiments with variable interval schedules. However with …

Computer Simulation For Studying The Performance Of Plasticating Extruders, K. S. Govindaraju

Theses

A Computer program for simulation of a single screw plasticating extruder is presented. The computer program simulates the performance of different size extruders with various screw geometries for plasticating and pumping different thermoplastic resins. The simulation yields valuable information on the performance of an extruder for a variety of operating conditions. The simulation program provides a means of separating the effect of one variable at a time on the overall performance of the extruders.