Engineering Commons^™

Wavelet Transform Methods For Identifying Onset Of Semg Activity, Janina Wilen

Theses

Quantifying improvements in motor control is predicated on the accurate identification of the onset of surface electromyograpic (sEMG) activity. Applying methods from wavelet theory developed in the past decade to digitized signals, a robust algorithm has been designed for use with sEMG collected during reaching tasks executed with the less-affected arm of stroke patients. The method applied both Discretized Continuous Wavelet Transforms (CWT) and Discrete Wavelet Transforms (DWT) for event detection and no-lag filtering, respectively. Input parameters were extracted from the assessed signals.

The onset times found in the sEMG signals using the wavelet method were compared with physiological instants …

Combustion Of Aerosolized Spherical Aluminum Powders And Flakes In Air, Binu Zacharia Eapen

Theses

Combustion rates and completeness of aerosolized spherical aluminum powders and flakes are compared using constant volume explosion experiments. The comparison of particles and flake sizes was made based on their specific surface areas determined using the Brunauer-Emmett-Teller (BET) method and respective "BET diameters". It is observed that the rates of pressure rise and rates of flame propagation were higher for aluminum powders with BET diameters of about 2 to 5 μm compared to aluminum flakes for which the BET diameters were under 1 μm In agreement with the flame propagation rates, the overall completeness of combustion was also higher for …

A Labview Program To Obtain The Initiating Component Of A Vergence Eye Movement In An Open-Loop Experiment, Anuj P. Daftari

Theses

The vergence oculomotor system is used in viewing objects moving in depth, such as when a baseball player tracks a ball moving towards him. It is composed of two components according to the Dual Mode Theory; a fast preprogrammed initiating component and a slow feedback-controlled sustaining component. The initiating component is described with open-loop control and the sustaining component is described as a closed-loop feedback control system. Previously, several languages have been utilized to develop programs to study and isolate the open-loop portion of vergence eye movements. Presenting a subject with a stimulus, which initiates an open-loop response has been …

Development Of Fmri Compatible Lower Body Negative Pressure System, Pratap Singh Kunwar

Theses

The lower body negative pressure (LBNP) system provides a controlled, measured orthostatic stress to the cardiovascular system, which can be used with a magnetic resonance imaging (MRI) machine to study cardiovascular and cerebrovascular responses to graded LBNP. In the past, even though functional MRI (fMRI) was considered as one of the best modalities with which to measure small metabolic changes in the brain, it has not been used with an LBNP system to measure cerebrovascular changes. This was due to the lack of an fMRI compatible LBNP system.

In this project, an tMRI compatible LBNP system was first constructed without …

Characterization Of Aluminum Powder Ignition, Salil Mohan

Theses

Heating rate effect and particle size effect on ignition temperature of Al powder were studied to collect data for development of a possible Al powder ignition model. Aluminum ignition is associated with a highly accelerated burn rate and high combustion enthalpy. A new ignition model, which can adequately interpret these conditions, is needed to develop better propulsion fuels, explosives and incendiaries that use Al as an additive. This experimental program was focused on preparing framework for characterization of ignition kinetics of Al powder by determining the ignition temperature for different, systematically varied, heating rates and particle size. The experimental setup …

Modeling And Analysis Of Hospital Facility Layout Problem, Amol Shrikrishna Padgaonkar

Theses

The optimal solution to any facility layout problem is an important aspect and a major concem as it involves significant material handling and transportation cost. The objective is to arrange the departments within the predefined facility boundaries in the way that the interaction between the functions is efficient and the overall movement cost is minimized. While facility layout problems have traditionally focused on manufacturing facilities, there has been little work on analyzing layouts for hospitals. The thesis focuses on hospital facility layout problems (HLP) to (i) minimize the movements of patients and (ii) minimize the movements of accompanying resources such …

Configurable Computer Systems Can Support Dataflow Computing, Anish Arvind Sathe

Theses

This work presents a practical implementation of a uni-processor system design. This design, named D²-CPU, satisfies the pure data-driven paradigm, which is a radical alternative to the conventional von Neumann paradigm and exploits the instruction-level parallelism to its full extent. The D²-CPU uses the natural flow of the program, dataflow, by minimizing redundant instructions like fetch, store, and write back. This leads to a design with the better performance, lower power consumption and efficient use of the on-chip resources. This extraordinary performance is the result of a simple, pipelined and superscalar architecture with a very …

Adaptive Turn-Prohibition Routing Algorithm For The Networks Of Workstations, Amey Bhaskar Shevtekar

Theses

Deadlock occurrence is a critical problem for any computer network. Various solutions have been proposed over last two decades to solve problem of deadlocks in networks using different routing schemes, like up/down routing algorithm used in Myrinet switches. However, most of existing approaches for deadlock-free routing either try to eliminate any possibility of deadlock occurrence, which can result in putting extra restrictions on the routing in the networks or put no restrictions on routing, which leads to other approach namely deadlock recovery. In this thesis emphasis is on developing hybrid approach for routing in wormhole networks, wherein some prohibition is …

Kinetics Of Ho2 Abstraction Of H Atoms From Hydrocarbons And Thermochemical Properties Of Urethane Monomers And Radicals, Rajul Shah

Theses

SECTION I: Kinetics of HO₂ Abstraction of H Atoms From Hydrocarbons

Structures, internal rotational barriers and ideal gas thermochemical properties, ΔH^°_f98 for representative series of transition states for abstraction of H atoms from primary, secondary and tertiary hydrocarbons by the HO₂ radical, TC-HOOH (1), TCC-HOOH (2), TC₂C-HOOH (3), TC₃C-HOOH (4), TC₂CC-HOOH (5), TC₂CC-HOOHC (6) and TC₃CCC-HOOH (7) are analyzed in this study. Molecular structures and vibrational frequencies are determined at the B3LYP/6-3111G(d,p) density functional level. The S°₂₉₈ and C_p(T) values (300≤T/K≤1500) from vibrational, …

Chemical Vapor Deposition Of Polymeric Films, Chi Yu

Theses

Poly-peri-naphthalene (PPN) is a one-dimensional (1 -D) graphite polymer with unique planar ladder-like conjugated molecular structure. PPN was predicted to be a good intrinsic conductor and have high thermal stability and high environmental stability.

In this project, chemical vapor deposition (CVD) and plasma enhanced chemical vapor deposition (PECVD) of carbon films with PPN structure using PTCDA as precursor were carried out under different conditions. There is only limited information in literature on the synthesis of PPN films by PECVD process, which may allow deposition at a higher rate with lower substrate temperature. In this work the influence of deposition parameters, …

Transmission Of Light And Audible Sound In A Synthetic Fog Medium, Bhavin Babaria

Theses

The primary goal of the thesis was to study the propagation of visible light and auditory sound through a synthetic fog medium compared to an ambient air environment. It is known that the fog substantially decreases the visibility however; this has not been studied quantitatively. Further information regarding other energies such as sound is also needed to understand how the energy reacts in the fog medium. The extent of visual and auditory degradation in humans needs to be investigated. Researchers have studied light transmitted through water, air; however, no one has studied how light or sound is transmitted through a …

Simultaneous Heat And Mass Transfer To A Liquid Through Two Separated Interfaces, Ku-Il Park

Theses

The oxygenator is the main element of a heart-lung machine, which takes over the work of the lungs (adding oxygen to and removing carbon dioxide from the blood) during an operation. Oxygenators function by passing oxygen through a hollow fiber (straw-like fiber), where blood gases are exchanged via tiny pores in the fiber walls. In this study, a fiber-in-fiber technology was used to design a temperature controlled blood oxygenator membrane module. A Celgard® X-10 hollow fiber was put through the lumen of a polypropylene hollow fiber having a solid wall. Both fibers are made of polypropylene and are waterproof due …

Magneto-Rheological Fluid Orthosis For Suppressing Tremor, Hyoung-Joo Yeo

Theses

Tremor is a common movement disorder that occurs with specific neurological conditions. This condition may seriously impact daily living activities. The aim of the present study is to evaluate the possibility of the development of a wearable technology that is capable of exerting torques at a user's joints for suppressing tremor.

This thesis is based on the concept of "smart structures" which are made of Magneto-Rheological (MR) fluid that can dynamically alter its viscosity under magnetic field. The wearable tremor suppressing orthosis needs several conditions. It should be safe, light weight, simple and small in structure, and easily attachable. An …

Pulsed Laser Ablation Deposition And Optical Characterization Of Hexagonal-Wurtzite Silicon, Berzelius Ybanez Cada

Theses

Hexagonal-wurtzite silicon phase silicon is an unusual polymorph of silicon with potentially useful electro-optical properties. Previous studies using a simple deposition system demonstrated that laser ablation of the standard cubic-diamond silicon produces droplets containing hexagonal-wurtzite crystallites. In order to study the process parameters and to deposit larger hexagonal crystals, a new pulsed laser ablation system with variable parameters was assembled and tested. Deposition expenments were performed in high vacuum with different laser pulse power. Raman spectroscopy showed that the new system successfully produces hexagonal-wurtzite silicon. The droplet size distributions, measured with an optical microscope, were found to depend on the …

Evaluation Of Postural Stability Using Sensory Organization Test, Tiffany Sims

Theses

Poor postural stability of the elderly and other patients has been a major concern.The cost of treating injuries due to poor stability is expected to rise to $32.4 Billion by 2020. Many interventions have been proposed and used to improve stability. In order to determine the efficacy of these interventions, an objective evaluation of postural stability before and after intervention is important.

The aim of this thesis was to scientifically analyze the ambiguities in the equilibrium score (ES) given by the Neurocom Smart Equitest (NSE) machine, and compare it to a new measure of stability that has been proposed by …

Modelling And System Identification For Real Systems, Karolyn Murphy

Theses

The field of system identification and process parameter estimation is an area that has developed rapidly during the past few decades. The approach to the system identification problem can be influenced by many different aspects which include the specific purpose of the identification. In this thesis, system identification for the purpose of controller design is the central theme.

Initially, the work will focus on a number of approaches to real system identification. Particular attention will be made to the classical non-parametric techniques and the more modern parametric estimation techniques using both open- and closed-loop real-time data. A voltage controlled dc …

Optimisation Of Heat Transfer And Fluid Flow In The Cooling Of Building Integrated Photovoltaic Facades., Eoin Patrick Hodge

Theses

The aim of this research was to explore the effects of mature and developing technologies from aeronautical industries such as impingement and film cooling, and electronic cooling techniques, in the setting up of different laminar and turbulent flow regimes on PV cooling duct heat transfer rates, with air flow as that brought about with natural buoyancy effects in a vertical building facade. The problem of efficiency losses in PV panels, due to overheating, is one of the factors restricting the development and use of this renewable power source. PV panels can experience very high temperatures, due to the heat input …

Ground-Source Heat Pumps In Ireland: Heat Transfer Experimentation For The Design And Modelling Of A Sub-Slab Installation., Sarah O'Connell

Theses

Ground-source heat pump technology is currently undergoing rapid growth in Ireland. Three aspects of ground-source heat pumps have been studied in this thesis. The market expansion taking place in Ireland, heat transfer from the soil to the pipe of a ground- source heat pump collector, and the design of an innovative sub-slab ground-source heat pump system.

Initial investigations into the use of ground-source heat pumps in Ireland revealed surprising growth in the use of the technology. There have been approximately 1500 systems installed mainly since 2000. The ground-source heat pump market in Ireland has an estimated annual growth rate of …

Enhancement Of Linear Prediction Coefficient Quantisation In The 3g Adaptive Multi Rate Speech Coder, John Raymond Mccarthy

Theses

Most speech coding algorithms in use today utilise the source-filter model of human speech production in which speech is modelled as the response of a time varying, linear, all-pole, synthesis filter to an input excitation. In mobile communications, it is the coefficients of this filter and details of the excitation that are transmitted. The filter coefficients are first quantised using a limited number of bits. Due to coefficient sensitivity, direct quantisation of the filter coefficients may lead to an unstable filter during speech synthesis at the receiver and hence an alternative representation is needed. Line Spectral Frequencies (LSFs) have evolved …

Magneto-Acoustic Emission Analysis Of Microstructural Change In Aisi 430 And Aisi 304 Stainless Steel, Denis O'Sullivan

Theses

Magneto-acoustic emission (MAE) is a relatively new non-destructive detection technique. Its working principle is based on Barkhausen discontinuities and magnetostriction within a ferromagnetic material that is subjected to a varying magnetic field. Magneto-acoustic emission (MAE) and magnetic Barkhausen noise (MBN) sensing techniques were developed and employed to characterise plastically deformed and heat-treated AISI 430 ferritic stainless steel and AISI 304 austenitic stainless steel samples. A new waveform measurement parameter for magneto-acoustic emission was developed called MAE (Absolute “energy”).

Both MAE and MBN were found to decrease with increasing plastic deformation of AISI 430. MAE (Absolute “energy”) and MBN (RMS) were …

Delivery Of Wireless Ad Hoc Services Using Jini, Sinead Cummins

Theses

Traditionally, networks were planned infrastructures consisting mainly ot desktop machines and servers. As a result of the careful planning carried out prior to their construction, these networks were easily managed and controlled by network administrators. Today these networks are joined by cell phones, PDAs and other handheld devices as well as a host of sensors. This has led to a migration from traditional networks to ad hoc networks.

One way to envisage what this new environment will be like is to imagine what life will be like at the edge of the network. Today the edge mostly consists ot clients …

Closed Material Cycles And Organic Solvent Recovery, Tim De Jong

Theses

A survey was conducted of the pharmaceutical sector in Ireland to establish organic solvent usage, recovery and treatment practices. The eleven companies covered by the survey, which included several of the worlds largest multinational companies, consumed in the region of 122,000 tonnes of organic solvent in 2002. Approximately 53,000 tonnes was recovered on-site while 69,000 tonnes of virgin solvent was brought on-site to replace that which was lost through wastewater treatment, incineration, fugitive emissions and off-site treatment or reuse. The total quantity of virgin solvent consumed by the eleven companies accounted for 75.4 % of organic solvent imports to Ireland. …

Address Assignment In Ad-Hoc Networks, John Paul O'Grady

Theses

A wireless ad-hoc network is a collection of autonomous nodes or terminals that communicate with each other by forming a multi-hop radio network and maintaining connectivity in a decentralised manner. In an ad hoc network routing is used to find and maintain a path through the network. Routing requires each node to have a unique identifier, to ensure that packets sent to a particular node reach their intended destination. Most ad-hoc routing protocols assume that a node already has an address prior to its entry into a network and so the issue of address assignment is largely ignored. This however …

Preparation And Characterization Of Thermally Stabilized Ceria And Ceria Containing Materials, Leena Ali Rashid Al-Kaabi

Theses

Ceria, CeO₂, is one of the most important catalytic materials that can play multiple roles owing to its ability to release and uptake oxygen under catalytic reaction conditions with the preservation of it fluorite structure. Textural and thermal stability is a critical issue in determining the promoting and metal supporting functions of CeO₂ in its catalytic applications in the three way catalysis. Therefore, significant efforts have been made by industry on finding ways to improve the thermal stability of ceria both by modification of the synthesis of CeO₂ and by looking at possible stabilizers.

In the …

The Role Of The Solid Substrate On The Spreading Kinetics Of A Liquid Droplet, Bashar Jalal Sasa

Theses

Classic hydrodynamic wetting theory leads to a linear relationship between spreading speed and the capillary force, being determined only by the surface tension of the liquid and its viscosity.

The theory appears in good agreement with results generated from experiments conducted on the spreading of Polydimethylsiloxanes (PDMS) on soda-lime glass substrate and fails to account for the behavior of other liquids. This thesis examines the role played by the solid substrate on the spreading kinetics of liquid droplets. The set of experiments whose results are presented below used different types of liquids with various properties of surface tension and viscosity …

Material Selection For A Composite Hip Joint, Ahmed Abdullah Ali Al-Hosani

Theses

The use of biomaterials in orthopedic surgery has been successfully acceptable in the current medical practice. Total hip joint replacement (THR) is one of the most popular and successful operations in orthopedics. Total hip replacement (THR) has been using metal prosthesis for many years. However, the use of metal implants has two major disadvantages. The first disadvantage is that the stiffness of the metallic prosthesis is relatively high compared to the surrounding, load carrying bone. The elastic moduli of titanium and cobalt-chromium alloy are 110 and 210 GPa, respectively. Whereas the elastic modulus of cortical bone ranges from 15 to …

Development Of A Low Jitter Multiplying Delay Locked Loop, Ian Kennedy

Theses

The clock generator is a critical component in high-speed wireline communication systems. The clocks in these systems mark time at precise regular intervals. Any deviation of the clock edges from these ideal time points is called jitter and it degrades the overall integrity of the communication system. This thesis looks at both phase locked loops (PLLs) and delay locked loops (DLLs) and their ability to provide these precise clocks. Expressions for the thermal noise-induced jitter in both the PLL and DLL are compared. From this, the DLL is shown to possess the potential for better jitter performance. However, to realise …

A Sip Based Multimedia Messaging Service, Donna Griffin

Theses

The Session Initiation Protocol (SIP) is the protocol of choice for establishing multimedia sessions in Universal Mobile Telecommunications System (UMTS) networks as stated by 3GPP. SIP is a protocol that will merge together the cellular and Internet worlds and is also scalable, highly available and extensible. It enables mobile carriers to extend operations, administration, maintenance and provisioning (OAMP) in one application to all applications. In addition, while SIP permits presence. Instant Messaging, File Sharing etc., its ultimate value lies in seamlessly aggregating these applications in more powerful offerings, such as Multimedia Messaging, Push to Talk and Voice over IP.

Multimedia …

Performance Estimation Of A Sip Based Push-To-Talk Service For 3g Wireless Networks, Eoin O'Regan

Theses

Push To Talk (PTT) services have been in existence for several decades providing dispatch services via two-way radio such as walkie-talkies. For a number of years now PTT services have been available for use over mobile phone networks. These mobile PTT services have occupied a niche market with business users and have been provided on proprietary networks that do not enable roaming.

Over the past year there has been an explosion of interest in the concept of PTT provided over mobile networks using Internet Protocol (IP) technology. This service uses cellular access and radio resources more efficiently than circuit-switched cellular …

A Service-Based Architecture For Learning Management Systems Which Supports Personalisation And Collaboration, Markus Schmid

Theses

This work develops a service-based architecture for an extensible and customisable learning management system (LMS) runtime environment. The architecture mainly defines interfaces for the interaction of functional system components represented by loosely coupled distributed services. Services that represent functional components of the distributed LMS are called e-leaming services. In addition, underlying infrastructure services provide supportive functionality such as service-lookup within an institution. Users access the system using an LMS portal component that acts as a front-end for the LMS services.

While existing e-leaming environments provide a relatively good coverage of most of the functional requirements defined in this work, they …