Engineering Commons^™

Psychophysically Derived Work Frequencies For Manual Pouring Operations In The Foundry, Sadat Karim

Masters Theses

This paper presents a study on a combination lift and carrying task and was designed to simulate a metal pouring operation commonly found in foundries. Two laboratory experiments were conducted. The first experiment was designed to study the effects of two different mold heights (0.6096 m. and 0.4572 m.) and two carrying distances (1.2192 m. and 4.572 m.) on physiological response variables and on subjects' rating of perceived exertion while performing a simulated pouring operation at a documented foundry frequency. The second experiment was designed to determine maximum acceptable task frequencies (MAF) for males performing a simulated pouring operation at …

Simulation Of The Hybrid Fuzzy-Boolean Finite State Machine (Hfb-Fsm), Hamed Shakouri

Masters Theses

Several models of fuzzy finite-state automata have been proposed in the literature. One model which benefits from the existing algorithms for designing Boolean finite-state machines, has been proposed by J. L. Grantner [8]. This model, which is called Hybrid Fuzzy-Boolean Finite State Machine (HFB-FSM), along with its algorithmic design procedure, can be used for implementing dynamic linguistic systems [7,8,13]. In this thesis we have developed a simulation program for the HFB-FSM model using C++ programming language. In order to simulate a HFB-FSM model, the user provides the information defining the system's behavior. Based on the algorithm proposed in [8], the …

Image Processing Based On A Fuzzy Logic Edge Detection Algorithm, Jamshid Khazaai

Masters Theses

One of the major problems in image processing is that of efficient edge detection. This is because the automated determination of an edge requires a subjective interpretation of just what the image author intended to be an edge. By training an edge determination algorithm to be sensitive to edges in a consistent manner, efficiency can be improved. This is the central idea of this thesis in which I define edge occurrences for the intensity (monochrome) images using fuzzy sets.

Edge characteristic functions are proposed for detecting edge pixels within a desired block of an (intensity and binary) image based on …

Expedient Method To Determine Active Zone Depth For Expansive Soils In The St. Louis, Missouri Area, Robert Allen Abbott

Masters Theses

"A laboratory testing program was developed to formulate a relationship which could be used to estimate the active zone depth at a given site with the index properties of the potentially expansive soils at the site. The testing program utilized standard consolidometers to incrementally add moisture to soil specimens to determine a swell versus soil suction index. Tests were performed on laboratory manufactured soil specimens of commercial clay to validate the testing methodology.

A QUATTRO PRO computer spreadsheet was developed to perform the calculations to determine the potential field surface heave for the soils tested provided they were at a …

Statistical Analysis Of Structural Response Via A Quadratic Regression Model, Mahesh Balasubramanian

Masters Theses

"Described herein is the development of an efficient capability to analyze the statistics of structural responses given a description of the statistics of the input, or design, variables. In the application of interest, inputs and outputs are related through a very large finite element model. The finite element model is approximated here by a second-order hyper-surface. Developed for the quadratic relationship are expressions for response means, standard deviations and correlation coefficients. The analysis allows correlated and uncorrelated input variables, and admissible input variable distributions are normal, log-normal and Weibull.

In addition to characterizations of response means, standard deviations and correlation …

Experimental Investigation Of Water Spray Cooling Characteristics Of A Solid Heated Surface, Rainer F. Ponzel

Masters Theses

Water spray cooling characteristics of a solid heated surface were investigated to better understand the physical phenomenon of nucleate boiling heat transfer for full cone sprays. An experimental test loop was developed to conduct the spray cooling experiments. A uniform heat flux condition was assumed, and the liquid flow rate and nozzle orifice diameter were selected as the main variables. Two water temperatures were chosen to perform the study. Saturated water spray was utilized to measure the wall superheat temperature. Subcooled water spray was applied to investigate the effect of water spray in the single-phase regime.

Experiments conducted using the …

Introduction Of Iowa System Of Curves To Reliability Engineers, Alamgir Alvi

Masters Theses

The reliability engineers have been using different techniques and a good number of theoretical models to analyze and predict the performance of the designed systems and products. While, most of the engineers working in the area of life analysis, have been using the empirical model named Iowa systems of curves to analyze and forecast the service life of industrial properties. Two different groups of experts have obviously been working toward almost the same objective but using different techniques and tools. The purpose of this study is to introduce to reliability engineers the Iowa systems of curves and compare this empirical …

Flow Due To A Moving Pressure Distribution Over Free-Surface With Finite-Depth Bottom, Noriaki Okita

Masters Theses

Two-dimensional, steady-state and time-dependent analysis of wave making phenomenon due to a moving pressure distribution in sub-critical Froude number was performed. The domain is consisted of undisturbed free-surface at y=0, flat bottom at y=-h, and it is unbounded in horizontal direction. The pressure distribution was treated as an ideal model of an air-cushioned-vehicle (ACV). Ideal flow theory and linearized boundary conditions were used. Numerical integration algorithm was developed to evaluate the analytical solution. The surface elevation, bottom pressure profiles, and wave resistance were analyzed as functions of speed and depth.

The steady-state wave resistance calculated from the surface elevation profile …

Fuzzy Based Forebody Vortex Flow Controller For The X-29a Aircraft, Jin Suzuki

Masters Theses

This paper demonstrates the development and performance of A Fuzzy Logic based regulator for an aircraft which is equipped with pneumatic forebody Vortex Flow Controller at high angle-of-attack flight condition. The VFC provides the pilot additional control power at flight conditions where conventional effectors such as rudder and differential flaps lose effectiveness.

Fuzzy Logic Control (FLC) is applied to a mixed bang-bang and conventional type control system. This unique configuration ensures robustness of the system and simplifies the controller design. Performance of the FLC based regulator shows a 10.3% reduction in cost function compared to the system controlled by a …

Design And Development Of A User Interface Between Mapics/Db And Factor 5.2, Raghu Pothuri

Masters Theses

An interface program was designed to transfer production data from MAPICS/DB, a MRP II software, to FACTOR 5.2, a Finite Capacity Scheduling software. Since FACTOR 5.2 is designed to be used in a stand-alone mode with its own independent data base, this interface program extracts data from the MRP II System and converts it to formats specified by the Scheduling System. To create a computer model of the manufacturing process, information about manufacturing orders, routings, and production facilities was obtained from MAPICS/DB files. Certain information needed by FACTOR 5.2, which is not available in MAPICS/DB, was supplemented by the program …

Evolutionary Codesign, Karthikeyan Ethirajan

Masters Theses

We present our approach to hardware/software partitioning for embedded systems based upon Evolutionary Algorithms. We have implemented it in a CAD tool, EvoC - Evolutionary Codesign which does automatic hardware/software partitioning of real-time embedded systems at the system level. Our objective is to find good design configurations that are tuned towards user's preferences. We are able to explore a large, often intractable design space using Evolutionary Algorithms while evaluating solutions having multiple and sometimes conflicting attributes in the light of Multi-Attribute Utility Theory. EvoC provides a generic format for specifying a wide variety of design problems and the implementation assumes …

Predicting Timing Behavior In Architectural Design Exploration Of Real-Time Embedded Systems, Rajeshkumar Sambandam

Masters Theses

This thesis aims at developing efficient analytical techniques to perform trade-off studies in the architectural design exploration phase of real-time embedded systems. Real-time embedded systems (RTES) have stringent timing requirements. In the process of designing such a system, a key issue is to determine if a system is able to meet all the timing requirements imposed on it, though it may prove attractive in terms of cost and performance. Traditional methods of using event-driven simulation for modern RTES are very time consuming and are not guaranteed to prove feasibility. Specifically, we identify a flexibility metric to compare various options in …

The Effects Of Machining On Structure And Tribological Properties Of Ultra High Molecular Weight Polyethylene For Artificial Joint Prostheses, Jinshan Song

Masters Theses

Understanding the effect of machining on the structure and property of subsurface layer of ultra high molecular weight polyethylene (UHMWPE) can significantly facilitate the increase in longevity of artificial joints. This study was performed to investigate the machining effects on the polymeric structure and tribological properties. Machining parameters include cutting speed, tool feed rate and depth of cut. Temperature rise was studied during machining to assess the extent of thermal degradation due to machining. Polymeric structure of the semicrystalline polymer was characterized using differential scanning calorimetry (DSC) in terms of melting enthalpy, crystallinity and melting temperature. Surface texture and hardness …

An Investigation Of Mechanical Properties Of Composites Containing Recycled Rubber Particles, Ryan C. Archey

Masters Theses

In order to promote applications of recycled automobile tires, composite materials of recycled rubber tire particles with ethylene co-vinyl acetate (EVA), polybutadiene (PB), and Primacor were studied in the thesis. The composites were processed using a single screw extruder and a pelletizer. Compression molding was used to form specimens for hardness and impact tests. Mechanical properties of the composites were investigated in terms of tensile strength, percent elongation, Durometer hardness, and impact energy.

In this study, the content of recycled rubber was between 0 and 40 percent. Various matrices were processed using a combination of EVA, PB, or Primacor to …

Reinforcement Of Web Openings In Cold-Formed Steel Members, Erika Kirsten Nelson

Masters Theses

"To expand on previous research concerning perforated cold-formed steel web elements, an experimental investigation was conducted to examine the influence of reinforcement on the behavior and strength of single web flexural members with web openings. In current design practice, reduction factors are applied to the strength equations to account for the debilitating effect of web openings. This reduction in capacity may lead to the selection of a greater member thickness or depth than would be required of a solid web member. A more economical approach may be to reinforce the web in the proximity of the opening to increase the …

Stemming Technique For Loading Angled Holes Charged With Anfo, Michael David Wilkins

Masters Theses

"Little research has been published on stemming blast holes, particularly what happens during the process. Previous work has concentrated on the performance of the inert material to find the best way to seal the hole and retain the explosive energy, at the exclusion of determining what happens during the loading and stemming process. Such studies were carried out by Konya and Worsey.

The major problem with stemming studies is that rock is an opaque material, and the actual mechanisms involved during the stemming process cannot be viewed. For this reason, tests were performed using clear tubes to simulate a blast …

Asynchronous Distance Learning Technology: The Instructor's Perspective, Earl Alexander Evans

Masters Theses

"Advances in communications, computer technology and human-computer interfaces have enabled concurrent advances in Web-based education. A number of case studies concerning applications of Web-based education for both distance learning and on-campus programs have been published. Primarily, these studies have focused on individual assessments of the Web-based technologies. In addition, these published studies have generally highlighted the successes while little discussion about failed attempts has been presented in the literature.

In contrast, this thesis provides a broad-based assessment of applied Web technology for higher education. This research was conducted via a survey completed by twenty five university and college faculty from …

Damage Detection Of Bridge-Like Structures Using State Space Models, Javier Valentin Sivico

Masters Theses

"A global damage detection algorithm for bridge-like structures is proposed. This method provides the capability of determining the reduction in both stiffness and damping parameters of the structural elements. It is assumed the mass of the structural elements is not affected by the damages, which is a reasonable assumption for bridge-like structures. The proposed method uses the state space representation of the structural dynamics to make the diagnosis of the structural integrity. Given that the state space representation of any system is not unique, the damage detection procedure is developed for the physical coordinates of the state space representation. A …

A Monte Carlo Model Of Uncertainty In A Deterministic Hazardous Waste Transportation Risk Assessment, Michael A. Cowen

Masters Theses

This thesis is aimed at developing and applying advanced modeling tools in the prediction of risk to the general public from transportation of chemical waste on public highways. The modeling tools developed can then be used to compare alternative waste management scenarios. The application considered is related to the transport of hazardous waste generated by the United States Department of Energy (DOE) to current treatment, storage, and disposal facilities. DOE is currently considering four different scenarios.

The application considered can be more specifically defined as an analysis of the risk to the general public from transporting the 63 shipments of …

Mechanical And Tribological Properties Of Composites Of Recycled High Density Polyethylene And Recycled Rubber, Jason G. Boulanger

Masters Theses

This thesis presents a study on the mechanical and tribological properties of composite materials of recycled high density polyethylene (HDPE) and recycled rubber tire particles. The materials were compounded by extrusion and formed into test specimens by injection molding.

The first experiment studied the effect of recycled rubber percentage on mechanical properties of composites of recycled HDPE and recycled rubber. The mechanical properties included tensile strength, percent elongation, hardness, and impact resistance. Recycled rubber concentrations of 0, 5, 10, 15, 20, 25, and 30 percent were tested. The second experiment investigated the tribological properties of recycled HDPE and recycled rubber …

Synergistic Decision-Making Systems: Using Models Of Decision-Making Behaviors And Resources To Design Better Decision-Making System, Ronald R. Carter

Masters Theses

Despite advances in decision-making systems, many practical issues remain unaddressed and much of the computer's potential for supporting decisions is unrealized. The existing systems are often limited to specific decision-making activities or domains, and they force the decision-maker to adopt a closed and inflexible way of doing things. What is needed is a new approach to building decision-making systems, one that is not focused on how decisions should be made, but on the behaviors and resources involved in decision-making and how they affect the results. This paper explores such an approach. It examines how models of decision-making behaviors and resources …

Applications Of Artificial Neural Networks In Interactive Simulation, Payman Jula

Masters Theses

Although there have been many improvements in simulation technology over the past few years, it still suffers from many limitations. Simulation methods are usually time consuming and hence not suitable for the interactive decision making processes.

In this project, applications of Artificial Neural Networks (ANNs) to simulate manufacturing systems have been studied. The backpropagation Multiple Layer Perceptrons (MLPs) have been applied to simulate manufacturing systems. Some guidelines for developing appropriate ANNs have been presented. The results of ANN approach have been compared to those of conventional simulation methods.

The Effect Of Wet End Operations On Sizing Loss In Alkaline Papers, Suresh B. Cherukuri

Masters Theses

Changes in wet end of alkaline papermaking affect the size development as well as sizing loss. These changes include pH, alkalinity and type of filler used. Precipitated and ground varieties of carbonate fillers and the alkalinity associated with · them are believed to be the causes for the gradual sizing loss in alkaline papers due the accelerated hydrolysis reaction of sizing chemicals at higher alkalinity.

Precipitated and ground calcium carbonate fillers are used as fillers and compared to non carbonate filler such as kaolin clay for their response to size development and sizing loss at lower and higher alkalinity ranges …

Using An Evolutionary Strategy To Solve Frequency Allocation Problems, Min Chen

Masters Theses

Frequency allocation problem (F AP) is to assign radio frequencies to a number of stations subject to a number of constraints, so that the minimum interference is suffered. FAP is NP-complete. In order to solve FAPs, there are interference constraints to be satisfied. There are two constraints of FAP which were the focus of this study: (1) co-channel interference, (2) adjacent channel interference.

Evolutionary Strategies (ESs) are very efficient optimization algorithms based upon the principles of adaptive selection found in nature. In this study, a (μ,A)ES algorithm was implemented to solve instances of FAP.

This thesis has demonstrated that …

Study Of Periodic Gust Loads On Airfoils, Tatsuya Nakajima

Masters Theses

The wings on aircraft can experience unsteady loads due to atmospheric disturbances; e.g., wind, the wakes of other aircraft, structural vibrations, or some combination of these sources. In some cases flow unsteadiness can be beneficial by augmenting the lift and reducing the drag; under different circumstances temporal variations in the flow can induce stall or cause structural failure.

In this study, the response of isolated (and tandem) NACA 0012 airfoil(s) to time-periodic unsteadiness have been investigated. The sources of unsteadiness include a time-varying free stream flow angle, a time varying free stream velocity magnitude, and an oscillating airfoil.

The predicted …

A Study Of Kanban Based Production System In Cellular Manufacturing Environment, Sanjay Bhargava

Masters Theses

The study of effects of production data variabilities on Kanban based cellular manufacturing system is vital before its design and implementation because it would give better understanding of their uncertain behavior.

In this research, a detailed analysis of a Kanban system, with subcell scenario, under dynamic operating conditions is performed. The Control variables considered were number of Kanbans, processing time variability, demand variability and machine breakdown. The performance parameters considered were profit, production lead time, machine utilization and material processing lead time.

Approximately 200 simulation runs were made with 3 replications each by varying one control variable at a time. …

Investigation Of Electrotribological And Arc Erosion Behavior Of Cu-15vol.%Cr In Situ Composite, Zhongyu Chen

Masters Theses

Electrotribological and arc erosion behavior of Cu-15vol.%Cr in situ composite was investigated in terms of coefficient of friction, interfacial resistance, bulk temperature, and wear rate as a function of normal pressure, sliding speed, and electrical current. Microstructural change due to electrical sliding was studied to understand wear mechanisms. Cu-15vol.%Cr in situ composite was selected in this research because it exhibits an excellent combination of mechanical strength and electrical/thermal conductivity.

It was found that the average coefficient of friction decreased with increasing electrical current under dry electrical sliding. The average coefficient of friction was lower under lubricated electrical sliding than that …

Plastic Fiber Rolling For Concrete Reinforcement, Jeffery S. Thomas

Masters Theses

"Fiber reinforced concrete is gaining in acceptance and usage as its strength and toughness benefits are realized. Polypropylene fibers are currently the most commonly used fibers. However, the cost of virgin plastics limits the percent content that can be economically added to concrete. One would first believe that recycled plastics could offer a viable alternative to virgin-plastic fibers, but at present time extra selection and cleaning steps required to reprocess the recycled plastic into fibers makes it more expensive than virgin-plastic fibers. A fiber rolling process conceived and developed at the University of Missouri-Rolla has the potential of making recycled …

An Approach To Just-In-Time Implementation In Discrete Parts Manufacturing, Phillip Gregory Shirey

Masters Theses

"Just-In-Time manufacturing is a philosophy that encourages waste reduction and the elimination of non-value-added activities. The processes affected include office and shop personnel. When successfully implemented, JIT accounts for improved production lead time cycles, reduced inventories, improved employee morale, reduced cost of goods, and continuous improvements of the total business process.

This thesis identifies real world problems many medium size U.S. manufacturing companies now face, and an approach to JIT implementation in discrete parts manufacturing. The approach includes developing strategies to motivate the employees and to implement the tools and techniques of JIT, Total Quality Management, ISO 9001, and MRP …

Study On Rheological Behavior Of The Composites Of Recycled Hdpe With Recycled Tire Rubber Particles, Yanze Li

Masters Theses

This study was mainly concerned with rheological properties of composites of recycled high density polyethylene (HDPE) with recycled tire rubber particles at shear rates from 1.167 to 116.7 s^-1. The viscosity was investigated in terms of effects of shear rate, shear stress, temperature, concentration of recycled tire rubber particles and heating duration. The temperature was in the range from 160 to 250 °C and the rubber particle concentration was between 0 and 25%. The heat duration for the composites was up to 240 minutes before testing.

The viscosities of composites were decreased with increase in shear rate and …