Engineering Commons^™

Implementation Of The Plan For Every Part (Pfep) Tool And Additional Methodologies For Operational Improvement., Bernardo Luis Borges Pedroso

Masters Theses

The work focused on the inventory management of Dimplex Thermal Solutions, which had a profoundly overstocked warehouse and was suffering from significant operating expenses, due to the absence of a grounded ordering policy and the need to rent external storage space, respectively.

The main objective of the thesis was to solve the primarily mentioned problems, by constructing a Plan For Every Part (PFEP) tool, followed by the application of an inventory policy and the proposal of a redesigned warehouse layout, to compute ideal stock values and calculate the footprint requirements for Dimplex’s updated inventory levels, respectively. The execution step concerned …

Measurement Of Low-Speed Impinging Jet Structure Using Temperature Sensitive Paint, Arthur Dean Woodworth

Masters Theses

Temperature sensitive paint (TSP) is used to analyze surface flow structures driven by a jet impinging on a heated steel sheet. Temperature and Nusselt number images are calculated from CCD images of the TSP surface. TSP calibration is discussed. Skin friction data is obtained from the temperature images.

Data is collected for metal and 3D-printed plastic nozzles of varying shape and size at one or two jet airspeeds depending on the nozzle. For the circular nozzles, data is collected for four Reynolds numbers at impinging angles of 90, 70, and 50 degrees. For the elliptical nozzles and the star-shaped nozzle, …

Study Of Urethane Double-Coated Nylon Membranes For Fluid-Storage Applications, Micah Austin Howell

Masters Theses

Polymer-coated fabrics are used for many fuel and water storage applications, such as in U.S. military field operations. Urethane-double-coated nylon (UDCN) is one such material used in collapsible fluid storage tanks. Research into the mechanical properties of UDCN membranes under different environmental conditions is necessary for substantiating its current operations as well as developing new technologies. Novel modular, closed-loop and scalable pumped-storage hydropower (PSH) systems are one technology that could use UDCN membrane tanks in order to mitigate large costs, risks, environmental impacts, and time-for deployment associated with PSH system construction due to their modular, closed-loop technology. This study focuses …

Replacing Combustion Engines With Hydrogen Fuel Cells To Power Mining Haul Trucks: Challenges And Opportunities, Ayorinde Akinrinlola

Masters Theses

"With the proven advantage of higher energy density in hydrogen fuel cells over batteries, there is potential to apply fuel cells to power mining haul trucks. This study aims to evaluate the technical and economic feasibility of hydrogen fuel cell electric mine trucks as an alternative to current mine haul trucks. Specifically, the project: (1) developed an economic framework for evaluating the integration of renewable energy powered haul trucks into mining; and (2) applied vehicle drivetrain and energy simulation in Matlab/Simulink to elucidate the challenges and opportunities of incorporating hydrogen fuel cell technology into the current form factors of mine …

Modeling The Reactor Time-Dependent Delayed Particle Tail With Monte Carlo N-Particle (Mcnp) Version 6.2, Eli James Boland

Masters Theses

"Energy is deposited into experiment packages due to post-shutdown decay heat created from delayed particles. Modeling these delayed particles in a reactor assists researchers in quantifying the expected energy deposition sources to an experiment package before irradiation. This paper focuses on modeling the delayed particles in a reactor in MCNP6.2 by capturing a reactor as a source, converting this source capture to a source definition, applying appropriate physics such as activation and photonuclear interactions, and finally using proper tallies to create the expected delayed particle tail of a reactor.

To capture the source distribution, the FMESH capability within MCNP was …

Personalizing Student Graduation Paths Using Expressed Student Interests, Nicolas Charles Dobbins

Masters Theses

"This work proposes an intelligent recommender approach to facilitate personalized education and help students in planning their path to graduation. The original research contribution of this work is to develop a recommender approach that pervasively personalizes and optimizes a student’s path to graduation by accounting for the student’s career interests and academic background. The approach is a multi-objective optimization problem, subject to institutional constraints, with the goal of optimizing the graduation path with respect to one or more criteria, such as time-to-graduation, credit hours taken, and alignment with student’s career interests. The efficacy of the approach is illustrated and verified …

Understanding Charge Effects On Marked Ball Wear Rates – A Corrosion Study, John Bailey Fletcher

Masters Theses

"To measure the wear rates of grinding balls within a ball mill, marked ball wear tests (MBWTs) have been used extensively. Using the wear rates from a MBWT, operators select the most cost-effective media for their grinding application. One factor that a MBWT does not account for is the possible interaction between different media materials which could affect their corrosion rates. Galvanic coupling between dissimilar metals can cause significant changes in their corrosion rates. While galvanic interactions between minerals and grinding media have been studied, the interaction between dissimilar media has not. Corrosion rates and potentials of modern high carbon …

Effect Of Boron In Cast Iron, Suyash Durendra Pawaskar

Masters Theses

"Boron, mostly considered a residual element, has started to cause issues in the cast iron foundries by causing a decrease in the strength of pearlitic gray and ductile iron castings. Because of the increase in the use of boron-added steel scrap from automotive steel and a lack of agreement on the critical levels of boron in cast iron, foundries are facing difficulties in controlling the microstructure of gray iron castings when boron is present. The current investigation was designed to analyze the effects of boron in cast irons and predict a mechanism to understand its effects with a vision of …

Modelling And Development Of An Automated Ldpe Autoclave Reactor In Cfd For Revealing Ethylene Hot Spots, Eric Turman

Masters Theses

Computational Fluid Dynamics (CFD) was employed to develop a rigorous model of a low-density polyethylene (LDPE) autoclave reactor. Different numerical settings within the solver were evaluated to minimize false diffusion and to reflect the sensitive heat generation taking place during free radical polymerization. The rigorous CFD model employed reaction kinetics, Proportional Integral Derivative (PID) automated thermal management, and a rotating stirrer shaft. Validation was carried out to determine the sensitivity to time-step size, turbulence model, and grid resolution. Data were compared to an industrial scale plant autoclave to guide the development of CFD. Time-step independence was confirmed by comparing the …

Design And Optimization Of An Electron Cyclotron Resonance Thruster, Austen Thomas

Masters Theses

Presented in this work is the process in the design and optimization of a coaxial electron cyclotron resonance thruster. Electron cyclotron resonance thrusters are novel microwave-based thrusters which possess select technological advantages over mature electric propulsion concepts such as being electrodeless and only requiring a single power source. The thruster constructed in this work is a coaxial configuration and is termed the Western electron cyclotron resonance thruster. Thruster dimensions were optimized based on past experimentation completed with ECR thrusters. In an attempt to enhance the microwave plasma coupling of the coaxial thruster design three different antenna configurations were considered: a …

Development Of A Ppg Sensor Array As A Wearable Device For Monitoring Cardiovascular Metrics, Jose Ignacio Rodriguez-Labra

Masters Theses

Wearable devices with integrated sensors for tracking human vitals are widely used for a variety of applications, including exercise, wellness, and health monitoring. Photoplethysmography (PPG) sensors use pulse oximetry to measure pulse rate, cardiac cycle, oxygen saturation, and blood flow by passing a light beam of variable wavelength through the skin and measuring its reflection. A multi-channel PPG wearable system was developed to include multiple nodes of pulse oximeters, each capable of using different wavelengths of light. The system uses sensor fusion along with a machine learning model to perform feature extraction of relevant cardiovascular metrics across multiple pulse oximeters …

Dynamic Maneuvers For Satellite On-Orbit Servicing Utilizing Novel Continuum Robotics: Development & Experimentation, Nathan Dalton

Masters Theses

Robotic on-orbit servicing is a developing technology that seeks to increase the longevity and repairability of faulty or aging resident space objects. In this research, the development of a flexible continuum manipulator for a small satellite system that performs low-complexity on-orbit servicing or debris removal is presented. Derivations of manipulator kinematics are described in detail, a non-linear control scheme has been developed, and the accuracy and servicing applications for the prototype are evaluated and discussed. The manipulator has been tested on an air-bearing dynamics simulator, and the results are extensively analyzed. System recommendations and future work suggestions are presented.

Predicting Radiated Emissions From A Cable Harness Through Component Level Tests, Fuwei Ma

Masters Theses

“In this work, a procedure is developed to predict the radiated emissions from a cable harness using component-level tests. Direct measurement on the engine control unit is utilized to accurately characterize the equivalent common mode source voltages and impedance associated with the device. The cable harness geometry is reduced using the equivalent cable bundle approach by lumping wires according to the source and load impedance compared with characteristic impedance of the harness, which dramatically reduces the measurement effort and allows practical 3D full-wave simulation of the radiated emissions. Radiated emissions are predicted from an engine control unit (ECU) and an …

Numerical Investigations Of 2-D Magnetic Nozzles On Pulsed Plasma Plumes, Joshua Daniel Burch

Masters Theses

"This research presents studies of a novel type of magnetic nozzle that allows for three-dimensional (3-D) steering of a plasma plume. Numerical simulations were performed using Tech-X's USim® software to quantify the nozzle's capabilities. A2-D planar magnetic nozzle was applied to plumes of a nominal pulsed inductive plasma (PIP) source with discharge parameters similar to those of Missouri S&T's Missouri Plasmoid Experiment (MPX). Argon and xenon plumes were considered. Simulations were verified and validated through a mesh convergence study as well as comparison with available experimental data. Periodicity was achieved over the simulation run time and phase angle samples were …

Effect Of In-Situ Formed Nano-Calcite Particles On Hydration And Properties Of Cement-Based Materials, Bowen Tan

Masters Theses

The in-situ preparation of nano-calcite via bubbling method and the effects of the nano-calcite on the hydration process and properties of the cement-based materials are investigated in this research. The nano-calcite is synthesized under different conditions and added into Portland cement to prepare test samples. The bubbling method is then introduced in upcycling the municipal solid waste incineration (MSWI) ashes, and the effects of the upcycled MSWI ashes on the hydration of Portland cement is investigated. Experimental results illustrate that the COâ‚‚ bubbling method can produce nanometer-to-sub- micron-sized calcite particles, and the synthesis rate and the morphology of the nano-calcite …

Analysis Of Electromagnetic Interference Problems Causedbyhigh-Speed Multiplayer Boards With Split Referenceplane, Xin Fang

Masters Theses

"Digital/Analog ground partitioning has been used to isolate noisy digital and power current from sensitive analog currents in high-speed multiplayer printed circuit boards. The through-hole signal via enables convenient routing and component placement on the PCB and is used for signal interconnections when the signal traces are changing the layers. This design, however, breaks the current return path for signal traces that cross the two separated grounds, which causes undesired effects such as signal distortion and radiated emission.

Electromagnetic mechanism associated with them needs to be understood to control and suppress these undesired effects. In this paper, we have investigated …

Integrating Remote Sensing And Model-Based Datasets In A Machine Learning Model To Map Global Subsidence Associated With Groundwater Withdrawal, Md Fahim Hasan

Masters Theses

"Quantifying groundwater storage loss is becoming increasingly essential globally due limited availability of this major hydrologic component and its long recharge time. Groundwater overdraft gives rises to multiple adverse impacts including land subsidence and permanent groundwater storage loss. In absence of spatially dense monitoring network, publicly available in-situ data, and uniform monitoring strategies, it is challenging to assess the sustained losses from overexploitation of this resource. Remote sensing based techniques have the capacity to fill this gap to increase our groundwater monitoring capacities. Exploring the interrelation between groundwater pumping and land subsidence using remote sensing datasets can be a very …

Assessing Phenotypic Response Of Plants Irrigated With Municipal Solid Waste Landfill Leachate Using Computer Visualization, Rahel Pommerenke

Masters Theses

"Most solid waste collected in the US is disposed of in sanitary landfills, which have a lingering legacy of unintended negative impacts on the environment. Landfill design and operation are expensive, prone to multiple failure modes, and often do not address human and ecological risks presented by contaminants of emerging concern. A notable and common failure mechanism is leachate production. Moisture in the waste mixes with infiltrating water to form wastewater that must be collected and treated prior to discharge. Recycling leachate at landfills by recirculating it onto vegetated landfill covers relies on the evapotranspiration potential of plants to reduce …

Comprehensive Evaluation Of Novel Medium-Temperature And High-Temperature Resistant Re-Crosslinkable Preformed Particle Gels For Conformance Control, Zhanmiao Zhai

Masters Theses

"Gel treatment has been widely used to control excessive water production and improve oil recovery in mature oilfields. In comparison to traditional preformed particle gel (PPG), re-cross linkable preformed particle gel (RPPG) has a significant advantage in treating abnormal features such as open fractures, fracture-like channels, and void space conduits (VSC). This research provides a comprehensive evaluation of two novel RPPG products developed in our lab: medium-temperature resistant RPPG (MT-RPPG) for a Middle East reservoir and a high-temperature resistant RPPG (HT-RPPG) for North Sea reservoirs (130 ^oC).

We assessed the effect of the monomer types and concentration, pH, salinity, …

Particle Swarm Optimization For Critical Experiment Design, Cole Michael Kostelac

Masters Theses

“Critical experiments are used by nuclear data evaluators and criticality safety engineers to validate nuclear data and computational methods. Many of these experiments are designed to maximize the sensitivity to a certain nuclide-reaction pair in an energy range of interest. Traditionally, a parameter sweep is conducted over a set of experimental variables to find a configuration that is critical and maximally sensitive. As additional variables are added, the total number of configurations increases exponentially and quickly becomes prohibitively computationally expensive to calculate, especially using Monte Carlo methods.

This work presents the development of a particle swarm optimization algorithm to design …

Automatic Sparse Esm Scan Using Gaussian Process Regression, Jiangshuai Li

Masters Theses

“Emission source microscopy (ESM) technique can be utilized for localization of electromagnetic interference sources in complex and large systems. In this work a Gaussian process regression (GPR) method is applied in real-time to select sampling points for the sparse ESM imaging using a motorized scanner. The Gaussian process regression is used to estimate the complex amplitude of the scanned field and its uncertainty allowing to select the most relevant areas for scanning. Compared with the randomly selected samples the proposed method allows to reduce the number of samples needed to achieve a certain dynamic range of the image, reducing the …

A Variable Node Optimization Model For Byzantine Fault Tolerant Systems, Ian Robert Fulton

Masters Theses

“Byzantine Fault Tolerance (BFT) has been a major subject of study over the last two decades with increasing societal dependance on secure, correct, and reliable computer systems and online services. This research presents a model for high-level optimization of emerging systems that rely on these BFT algorithms and use a variable numbers of decision nodes. The model highlights the relationship between the security of a system and its efficiency. Two experiments were performed to determine system performance by varying the number of compromised nodes, decision nodes, and total nodes. They examine the probability that a transaction will be compromised based …

State Level Trends In Renewable Energy Procurement Via Solar Installation Versus Green Electricity, Eric Michael Hanson

Masters Theses

“In the past 5 years, consumer options for procuring renewable energy have increased, ranging from rooftop solar installation to utility green pricing to Community Choice Aggregation. These options vary in terms of costs and benefits to the consumer as well as grid integration implications. However, little is known regarding how the presence of a wide range of options for utility-scale renewable procurement affects demand for distributed residential solar installations. In theory, there are three possible relationships, (1) positive correlation, where utility-scale and distributed resources complement each other to increase overall production, (2) negative correlation, where utility-scale and distributed resources are …

Zinc Plating From Alkaline Non-Cyanide Bath, Abdul J. Mohammed

Masters Theses

“Alkaline non-cyanide zinc plating baths are preferred when trying to avoid the toxicity of cyanide baths or corrosivity of acid baths. Without additives, alkaline zincate baths produce powdery non-adherent deposits which have no use in commercial plating. Additives must be added at optimum concentrations to produce adherent, bright and uniform zinc deposits. In this study electrochemical tests were used to determine effects of additives on cathodic polarization, throwing power and morphology of deposits. Current density distribution in a unique bath of 37.5 g L^-1 Zn and 210 g L^-1 NaOH was modelled using COMSOL and validated two plating …

Study Of Contamination Resulting From Historical Mining Within The Old Lead Belt: Mineral Fork Watershed, 2021-2022, Tessa Nicole Mortensen

Masters Theses

“The Old Lead Belt in Missouri has been mined extensively over the past two hundred years, and with historical mining practices often not meeting modern environmental protection standards many areas have significant soil and water contamination as a result. This study focuses on the Mineral Fork River’s watershed in Washington County, Missouri, which includes portions of four separate Superfund sites. In this study, we exam the impact of historical mining on the health of alluvial systems, as evaluated by lead, zinc, and barium (barite) concentrations in the suspended and sediments within tributaries of the Mineral Fork River system. To relate …

Characterization Of Cermet Fuel For Nuclear Thermal Propulsion (Ntp), James Floyd Mudd

Masters Theses

“A manned flight to Mars is met with many technical challenges, not the least of which is the development of propulsion technology capable of moving a transit vehicle from Earth orbit to Mars orbit. NASA is investigating Nuclear Thermal Propulsion (NTP) as a way of reducing flight time and providing the option for a mid-mission abort. NTP, which uses a high temperature nuclear reactor to heat a propellant, requires advanced fuel materials capable of withstanding temperatures well in excess of 2000 K. Among the fuel options are ceramic metal (cermet) composites composed of refractory metals and Ultra-High Temperature Ceramics (UHTCs). …

Industry 4.0 Remanufacturing: A Novel Approach Towards Smart Remanufacturing, Prashansa Ragampeta

Masters Theses

“Smart remanufacturing has become more popular in recent years as a result of its multiple benefits and the growing need for society to encourage a circular economy that leads to sustainability. One of the most common end-of-life (EoL) choices that can lead to a circular economy is remanufacturing. As a result, at the end-of-life stage of a product, it is critical to prioritize this choice over other accessible options because it is the only recovery option that retains the same quality as a new product. This work focuses on the numerous technologies that can aid in the improvement of smart …

A Convolutional Neural Network (Cnn) For Defect Detection Of Additively Manufactured Parts, Musarrat Farzana Rahman

Masters Theses

“Additive manufacturing (AM) is a layer-by-layer deposition process to fabricate parts with complex geometries. The formation of defects within AM components is a major concern for critical structural and cyclic loading applications. Understanding the mechanisms of defect formation and identifying the defects play an important role in improving the product lifecycle. The convolutional neural network (CNN) has been demonstrated to be an effective deep learning tool for automated detection of defects for both conventional and AM processes. A network with optimized parameters including proper data processing and sampling can improve the performance of the architecture. In this study, for the …

Optimization And Modeling Of Esd Protection Devices, Li Shen

Masters Theses

“Transient voltage suppressors (TVS) are used to protect ICs (integrated circuits) against overvoltage, ESD (Electrostatic Discharge), inductive load switching, and even lightning strikes. In this research, a transient behavior model framework for ESD protection devices is used for modelling four different types of TVS (non-snapback, snapback, spark gap like device and varistor). The System-Efficient ESD Design (SEED) methodology is utilized to strengthen the trust in the model framework by efficient simulation of ESD interaction of the off-chip ESD protection devices with the IC ESD protection device and associated measurement data.

Improvements in the TVS transient response, accounting for conductivity modulation, …

Feasibility Of A Critical Experiment Utilizing Uranium Dioxide-Beryllium Oxide With Neutron Spectrum Shifting Capabilities, Ashley Rachel Raster

Masters Theses

“The goal of this project is to determine the feasibility of utilizing Annular Core Research Reactor (ACRR) fuel in core design with Sandia Pulse Reactor Facility’s (SPRF) Seven Percent Critical Experiment (7uPCX) fuel rods as driver fuel for a critical experiment facility to support future critical and benchmark experiments for the International Criticality Safety Benchmark Evaluation Project (ICSBEP) handbook. This is part of the Critical Experiment Design (CED) process for future criticality experiments. These criticality experiment designs have the main goal of being performed in the same facility at different neutron energy ranges. To test the feasibility of this experiment …