Engineering Commons^™

Wast3d Potential, Andrew Larsen

Masters Theses

Waste is obsolete. Standard building industry practices are harmful to the environment. Non-traditional construction methods were examined as alternatives. Circular design logic was the guiding principle in material choice. Additive manufacturing is a proven modern method for building construction. Research on 3D printing case studies revealed that recycled plastic is a proven material and readily available. Removing plastic waste from the environment and sequestering it in architectural components gives the material a new purpose. The component of focus was a building block for a wall assembly. Inspiration was taken from the hexagonal Basalt rock formations found near volcanic fault lines. …

Fungi In Flux | Designing Regenerative Materials And Products With Mycelium, Arvind Bhallamudi

Masters Theses

As the world grapples with the escalating crisis of climate threats and environmental degradation, this research delves into the synergistic potential of design and biology, developing safe and sustainable materials for applications in prototyping, furniture and interior design. Harnessing the power of a unique organism - fungi, the study proposes an accessible, efficient, and resilient material resource system. It utilizes local waste streams and mycelium (the vegetative part of fungi) to grow functional structures. An experimental and small-scale protocol is modeled by testing bio-fabrication and bio-printing methods. The composites' performance qualities and characteristics are evaluated through mechanical testing and a …

Investigating Disparities And Safety Equity In Pedestrian Nighttime Crashes In Michigan, Sia Isaria Mwende

Masters Theses

For the past eleven years (2011 - 2021) in Michigan, 76 percent of all fatal pedestrian crashes occurred at night. Over the same period, about 36 percent of pedestrian nighttime crashes were fatal or incapacitating (KA), while only 25 percent of daytime pedestrian crashes were fatal or incapacitating (KA). Previous studies suggest that, overall, poor neighborhoods and racial minorities are associated with more pedestrian crashes. With more fatal and incapacitating pedestrian crashes occurring at night, it is imperative to examine how these crashes are distributed by economic status and racial makeup. Therefore, this study aims to investigate the racial and …

Surface Electromyographic (Semg) Transduction Of Hand Joint Angles For Human Interfacing Devices (Hid), Brendan P. Beauchamp

Masters Theses

This is an investigation of the use of surface electromyography (sEMG) as a tool to improve human interfacing devices (HID) information bandwidth through the transduction of the fingertip workspace. It combines the work of Merletti et al and Jarque-Bou et al to design an open-source framework for Fingertip Workspace based Human Interfacing Devices (HID). In this framework, the fingertip workspace is defined as the system of forearm and hand muscle force through a tensor which describes hand anthropometry. The thesis discusses the electrophysiology of muscle tissue along with the anatomy and physiology of the arm in pursuit of optimizing sensor …

Approximate And Sample Entropy Of Center Of Pressure In Unperturbed Tandem Standing: Contribution Of Embedding Dimension And Tolerance, Jayla Mashae Wesley

Masters Theses

Approximate entropy (ApEn) and sample entropy (SampEn) are statistical methods designed to quantify the regularity or predictability of a time series. Although ApEn has been a prominent choice for use, it is currently unclear as to which method and parameter selection combination is optimal for its application in biomechanics. The goal of this thesis was to examine the difference between ApEn and SampEn related to center of pressure (COP) data during standing balance tasks, while also refining tolerance r, to determine entropy optimization. Six participants completed five 30-second, feet together and tandem standing, trials under eyes-open and eyes-closed conditions. Ground …

Improving Future Vehicle Fuel Economy And Operational Design Domain Through Novel Data Pipelines, Kyle James Carow

Masters Theses

Modern automobiles have greatly advanced in recent years, with technological developments that enhance performance, safety, and comfort. However, there is still much room for improvement. Today’s vehicles are heavily reliant on the combustion of fossil fuels, proven to be harmful for the environment on both a local and global scale. In addition, the safety benefits of autonomous vehicles and advanced driver assistance systems are not yet fully realized due to the limited operational design domain of these technologies. In this research, these needs are addressed through the development of two novel data pipelines. In the first study, a novel methodology …

On Hydrophobic Deep Eutectic Solvents: Thermo-Physical Properties And Applications In Gas Solubility, Shan Khai Liew

Masters Theses

Carbon dioxide (CO2) has been widely recognized as one of the greenhouse gases (GHGs) in the atmosphere. GHGs cause global warming, which will bring a lot of problems and irreversible changes. To curb CO2 emissions, much effort has been done. There are many technologies available for CO2 capture, such as amine scrubbing, pressure or temperature swing adsorption, membrane separation, and many solvents and absorbents that have been proposed for CO2 capture (e.g., zeolite, silica materials, graphene, activated carbon, etc.) at every stage (pre-combustion, post-combustion, oxy-combustion). However, these materials have their own drawbacks. Hydrophobic deep eutectic solvents (HDES) is a green …

Concurrent Validity Study Of 3d Motion Measurement Systems: Vicon Vs. Xsens, Pias Das

Masters Theses

As the Inertial Measurement System (IMS) being a potential alternative to the Optoelectronic Measurement System (OMS) in terms of capturing comprehensive and objective musculoskeletal data, they need to be verified concurrently with the OMS before we start using the IMS in clinical motion analysis. To achieve this, a concurrent validity experiment of the Xsens system (IMS) in comparison to the Vicon system (OMS) was conducted for both upper and lower extremity movements during walk, squat, and lateral lunge (left and right) to quantify the degree of similarity of kinematic data between the two systems by direct comparison, root mean square …

Scalable And Continuous Fabrication Of Dendrimer Based Gene And Protein Delivery Systems, Joseph Johnston

Masters Theses

"Gene and protein therapeutics play critical roles in the drug market and represent the future of biopharmaceuticals. Polymeric nanoparticle-based gene/protein delivery systems are promising owing to their ability to protect the cargo from degradation, improving intracellular delivery and transfection efficiency as well as abundant sources and flexibility to be modified. Yet the successful industrialized production and clinical application of polymeric nanoparticle-based delivery systems have long been limited by unsatisfied delivery efficiency and the lack of reproducible and scalable methods for the preparation of uniform nanoparticles with good batch to batch consistency. To address the unsatisfied efficacy and difficulty in scale-up …

Prediction And Root-Cause Analysis For Smart Speaker Intentional Electromagnetic Interference Attacks, Tanner Fokkens

Masters Theses

"Smart home and Internet of Things (IoT) devices have become ubiquitous in homes over the past decade. The smart speaker itself is often the device that interfaces all these devices together. Because of this, the smart speaker can become a point of attack for someone trying to exploit or hack into the smart home devices. In the past few years, it was discovered that smart speakers with microwave electromechanical system (MEMS) microphones are susceptible to intentional electromagnetic interference (I-EMI) attacks by modulating an audio command to a high-frequency carrier signal. This attack allows for command recognition for long-distances and smart …

Improved Decap Model And Placement Optimization Algorithm For Power Distribution Network Design, Jack Juang

Masters Theses

"Decoupling capacitors (decaps) are used in power distribution network (PDN) design to act as a low impedance return path for noise and act as a local source of charge when required by integrated circuits (IC). For placement of decaps, which can number even to the hundreds, many algorithms have been proposed including genetic algorithms (GA), iterative algorithm, and machine learning methods.

One limitation of iterative decap placement algorithms (adding one decap at a time) is how the construction of the algorithm affects the form of the final solution. For example, if the reward function (used in GA and machine learning …

A Hybrid Framework For Critical Infrastructures Interdependency Modeling, Simulation, And Analysis, David Corder Hinton

Masters Theses

"Flow system models, also known as flow network models, encompass vastly complex, ever-expanding problem sets which comprise the foundation for maintenance, operation, and improvement of critical infrastructures around the world. The stable operation of these vast critical infrastructures is fundamental to the continued advancement of modern society. These infrastructures are tightly interdependent and vulnerable to interruption by both natural circumstance and malicious targeting. This necessitates representation of such critical infrastructures and their multi-domain interdependencies in defense focused constructive and virtual simulation environments as a matter of national interest and security. By breadth exploration of the problem space, this work body …

Flight Software Development For A University-Class Microsatellite Mission, Yumeka Nagano

Masters Theses

"The purpose of this research is to present the software development process used by the Command and Data Handling (C&DH) subsystem as a part of a microsatellite mission underway at the Missouri University of Science and Technology. The mission's objective is to evaluate the performance of an innovative cold gas propulsion system for use in formation flying applications and the incorporation of a stereoscopic imaging sensor used to measure the satellite pair's relative position and velocity vectors in real time. C&DH uses a Raspberry Pi 3 Model B as the flight computer running a Linux environment, and the flight code …

Development And Testing Of A Hyperbaric Aerodynamic Levitator For Containerless Materials Research, Sydney Elizabeth Boland

Masters Theses

"This research focused on the development and testing of a hyperbaric aerodynamic levitator for container less materials research of specimens at temperatures greater than 2000°C and pressures up to 10.3 MPa (1500 psi). The effect of specimen size, specimen density, pressure, and flow rate on the levitation behavior was studied. Lightweight specimens demonstrated two stable levitation regimes that were speculated to be associated with a change in the turbulent wake structure. The hyperbaric aerodynamic levitator was also used to determine the effect of pressure on the heat transfer by studying the melting behavior of a levitated 3.0 mm diameter alumina …

Designing Exterior Lighting For Safety And Comfort While Minimizing Light Pollution, Energy Consumption, And Cost, Stephen Michael Simmons

Masters Theses

"Artificial light at night brings many benefits to society. However, these benefits do not come without costs. One environmental issue that is often overlooked in the design of public spaces and infrastructure is light pollution. At the expense of large amounts of energy, light pollution causes numerous harmful effects on human health, ecosystems, and the night sky. Today, the problem is becoming more widespread, especially with the increasing use of bright, white LED luminaires. Thus, it is imperative for designers and engineers to create smarter lighting designs that not only allow for safety and comfort at night but also promote …

A Real-Time Microwave Camera Using Zero-Bias Diode Detector, Liang Liu

Masters Theses

"This thesis presents the design of a microwave camera that utilizes a two-dimensional array of elliptical slot antennas and diode detectors to quickly and accurately locate radiation sources. Unlike traditional scanning techniques like ESM and holography, which rely on mechanical scanning, require a long measurement time, and are prone to mechanical errors, the microwave camera operates quickly and efficiently by using electronic switching to access the output of each detector. This results in a more precise and efficient means of locating radiation sources'--Abstract, p. iii

Implementing Effective University - Level Small Satellite Assembly, Integration, And Testing Procedures, Tyler Patrick Hoover

Masters Theses

"As applications for satellite assets grow within government and commercial spheres, demand for aerospace engineers and related technicians has pushed universities to develop graduates with relevant knowledge in the field. As such, universities began to grow university satellite programs to give members hands-on experience and a background of working on satellite systems before entering the workforce.

The M-SAT team at Missouri University of Science and Technology, along with contributions and assistance from the Air Force Research Laboratory and NASA, are progressing their first satellite mission through assembly, integration, and testing (AIT) development. This document serves to give a background into …

A Network Of Low-Cost Multi-Pollutant Air Quality Sensors For Evaluating Fine-Scale Exposure Disparity In Twin Cities, Mn, P M Varuni Abhayaratne

Masters Theses

"Poor air quality is detrimental to health and is a leading environmental risk factor for early death globally. The massive scale of urbanization and population growth has led urban air quality to become a global concern as the release of air pollutants into the atmosphere continues to increase. Air quality has traditionally been monitored using reference-grade monitoring stations that are expensive and sparsely distributed. Low-cost sensors can complement existing regulatory networks to provide more spatial detail, capturing fine-scale variations. This study investigates spatiotemporal pollutant patterns, exposure disparities and environmental justice using data collected from a two-year (2019-2021) deployment of a …

Tropospheric Correction For Insar Using Machine Learning, Ngo Hi Kenny Yue

Masters Theses

"Interferometric Synthetic Aperture Radar (InSAR) is a popular technique for studying Earth's surface deformation caused by phenomena like earthquakes and subsidence. However, its accuracy is limited by tropospheric delays caused by water vapor in the atmosphere. This limitation can be overcome by using methods that correct for tropospheric noise, such as statistical, empirical, and predictive approaches. This study explores the potential of using machine learning algorithms to predict the zenith total delay caused by tropospheric effects in InSAR measurements. The study employs two different machine learning algorithms, random forest and neural networks, to learn the relationship between numerical weather prediction …

Optimizing The Placement Of Multiple Uav--Lidar Units Under Road Priority And Resolution Requirements, Zachary Michael Osterwisch

Masters Theses

"Real-time road traffic information is crucial for intelligent transportation systems (ITS) applications, like traffic navigation or emergency response management, but acquiring such data is tremendously challenging in practice because of the high costs and inefficient placement of sensors. Some modern ITS applications contribute to this problem by equipping vehicles with multiple light detection and ranging (LiDAR) sensors, which are expensive and gather data inefficiently; one solution that avoids vehicle-mounted LiDAR acquisition has been to install elevated LiDAR instruments along roadways, but this approach remains unrefined. The eventual development of sixth-generation (6G) wireless communication will enable new, creative solutions to solve …

Tailoring A System Engineering And Management Plan For A University Satellite Team, Jacob D. Anderson

Masters Theses

"A Systems Engineering and Management Plan (SEMP) helps enable a successful engineering project or team. All university teams working on satellite development encounter similar obstacles that are not commonly seen in industry. As a result, university teams must determine new approaches to solve these unique and difficult problems. A SEMP can mitigate risks, solve problems, and provide streamlined solutions. A modified SEMP is proposed along with guidance for implementing it into a new team and an existing team.

The adopted SEMP provides a road map for the technical execution and program management of a university team. The SEMP should be …

Rapid-Throughput Analysis Of 1,4-Dioxane In Plants By Centrifugal Sampling And Phytoforensic Analysis For Site Delineation And Assessing Enhanced Rhizodegradation, Anthony Eberechukwu Oha

Masters Theses

"Owing to its broad use and environmental persistence, 1,4-dioxane (dioxane) poses a notable threat to public health and is recalcitrant to traditional remedial systems. Dioxane moves readily in an aqueous environment and is an emerging contaminant in drinking water, surface water, groundwater, and wastewater. The extent of dioxane in the biosphere is also difficult to delineate, particularly in the subsurface. Phytoremediation has demonstrated the potential for dioxane groundwater remediation. Recent findings indicate that plant-microbial symbiosis may be more advantageous for limiting potential transport and transfer into plant tissues and the atmosphere. Bioaugmentation of the rhizosphere paired with soil amendments has …

Selecting Consolidation Procedures For Making Concrete Specimens, Paige Marie Toebben

Masters Theses

"The goal of this research was to reevaluate ASTM C31 Standard Practice for Making and Curing Concrete Test Specimens in the Field, as well as deepen our understanding of the relationship between the consolidation process, concrete composition, and workability. An improved understanding of this area will help to reduce variability in concrete quality. The project involved evaluating the effect of different consolidation methods on concrete specimens with changing levels of workability. To do this, concrete cylinders were created with varying viscosities by adjusting the water-to-cement ratio (w/c) and water-reducing agent. More cylinders were created with varying paste volumes while keeping …

Static I-V Curve And Aging Test For Pim Characterization In Metallic Contacts, Kalkidan Anjajo

Masters Theses

"Spring clips and fabric-over-foams (FOFs) are widely used in mobile devices for electrical connection purposes. However, the imperfect metallic connections tend to induce passive intermodulation (PIM), resulting in a receiver sensitivity degradation, known as RF desensitization. Due to the complexity of the PIM characterization, there is not yet a way to evaluate PIM performance using a simple setup for environments like factories. In this study, a current-voltage (I-V) behavior-based PIM evaluation method is proposed and validated with various metallic contacts and contact forces. The test results demonstrated the feasibility of the PIM performance evaluation based on the measured static I-V …

Incorporating Novel Sensors For Reading Human Health State And Motion Intent Into Real-Time Computing Systems, Adam Sawyer

Masters Theses

"Integrating sensors that read states of the human body into everyday life is an increasing desire, especially with the rise of deep learning which requires vast stores of data to make predictions. This work explores integrating these sensors into the human experience through two methods and recording the results. The first of these methods integrates a MXene based field-effect transistor sensor for the 2019-nCov spike protein with a mobile app. This allows the user to read how saturated their breath is with Covid-19. The second method integrates 3D-printed pressure sensors, and a motion capture system, into a glove to read …

Microscopic Traffic Simulation Modeling And Communication Tool For Post-Disaster Evacuation Routing, Nicholas Kutheis

Masters Theses

"This research evaluated the effectiveness of conducting traffic simulation models and developing a mobile application to serve as a communication channel for emergency evacuation preparation and routing. An iOS and Android app was developed to display emergency events to users with suggested routes for evacuation and a microscopic traffic simulation model was conducted for the St. Louis (MO) metropolitan region that analyzed various road networks with projected evacuation demand.

A mobile application coded in Swift (Apple) and Kotlin (Android) featured an emergency notification screen that displayed the type of emergency warning (e.g., earthquake, flood, or no warnings) with provided routes …

Suppressing Aluminum/Silica Exchange Reaction Between High Aluminum Steel And Mold Flux During Continuous Casting Process, Kuanysh Nurbekuly Yermukhanbetov

Masters Theses

"Mold flux plays one of the critical roles in continuous casting of steel. It performs five primary functions: thermal and chemical insulation, lubrication between the steel strand and mold, absorption of inclusions, and promotion of even heat flux. The aluminum/silica exchange reaction occurring between steel and mold flux during the continuous casting process poses significant challenges in the steel industry. This reaction can lead to various defects in the cast product and adversely affect its surface quality, as well as downstream processing.

In this work, effectiveness of two approaches, namely slag dopant additions and electrochemical techniques, in suppressing the exchange …

Area Average Surface Transfer Coefficient In Unit Cell Geometries, Benjamin Gabriel Mackey

Masters Theses

"Honeycombs, metal foams, and lattice structures all provide a way to increase heat transfer due to better fluid mixing and larger surface area. Specifically, lattice structures can be a great way to provide heat transfer enhancement due to the ability to customize and optimize the unit cell geometry. In this research, a novel yet simple unit cell geometry is chosen for study. Four different configurations are tested in a lower Reynolds number range, 300–1800: single unit cell, two-unit cells in series, three-unit cells in series, and a 3x3 unit cell array. The Sherwood number of each configuration is found by …

Assessing A Byproduct Of The Cbd Ethanol Extraction Process For Potential As A Wood Finishing Product, Avani M. Flanagan

Masters Theses

Developments in regulations concerning the use of CBD products as therapeutic remedies have allowed the global cannabidiol (CBD) market to take off within the past five years. Despite producers of CBD oil wanting to optimize their methods and increase product yields, several waste streams still exist. During the winterization phase of the ethanol extraction process, CBD oil is cooled and filtered so the fats, waxes, and lipids from the Cannabis sativa plant can coagulate and be removed, creating a purer oil with higher potency but contributing to the 58% (crude weight) total loss that occurs throughout the process. The removed …

The Design And Development Of A Miniature Gridded Ecr Ion Thruster, Nicholas Nuzzo

Masters Theses

Plasma propulsion, a specific subset of electric propulsion (EP), is a class of space propulsion that produces plasma by excitation of a propellant at or above its ionization energy. This ionized propellant is then accelerated by an externally applied field (magnetic and/or electric) and produces thrust. There is an increasing need for miniaturization in spacecraft technology and the use of plasma EP devices in space propulsion. These systems provide an advantage over traditional chemical propulsion solutions which are less efficient and have more mass. Miniaturization of EP devices allows missions to have more space and mass available for their payloads …