Engineering Commons^™

Monitoring Micropile Foundations Of Bridge During Construction, Devin Tavis Dixon

Masters Theses

"Information regarding the load transfer of micropiles during in-service construction has virtually never been monitored or documented. The primary objective of this research project was to monitor the load transfer versus the depth of production micropiles during construction. The micropiles being studied were used to support Bridge No. 2 of the Foothills Parkway in eastern Tennessee during construction. Two of the piers (1 & 2) were instrumented for the purpose of this study. Vibrating wire strain gages (VWSG) were installed on select micropiles within pile groups of twenty (20) micropiles. Seven vibrating wire strain gages were installed on each micropile …

Systems And Image Database Resources For Uav Search And Rescue Applications, David Christopher Macke Jr.

Masters Theses

"Aerial search and rescue applications using unmanned aerial vehicles (UAVs) can incorporate image processing technologies to locate targets faster and with a higher degree of accuracy. The task of developing such systems involves the development of both hardware and software components. Examples of both hardware and software approaches in the design process for an aerial imaging system are shown for small UAV applications. This project contains resources to help facilitate the incorporation of UAV applications into educational ventures and design projects. A power supply design is done for a lightweight imaging system and a large database of aerial images is …

Effects Of Initial Conditions On Rayleigh-Taylor Instability Using Elastic-Plastic Materials, Pamela Susan Roach

Masters Theses

"When an elastic-plastic solid is accelerated by a fluid of lower density, Rayleigh-Taylor instability (RTI) is observed, and the instability is mitigated by the material's mechanical strength, initial conditions, and the acceleration that drives the instability. Such instances of RTI are observed in supernovas, explosive welding, and inertial confinement fusion. In contrast to Newtonian fluids, experimental study of RTI in accelerated solids is traditionally hindered by difficulty to measure material properties and exceedingly small time scales. An understanding of the role initial conditions and material properties have on the growth of RTI will lead to better control of the instability. …

Fluidic Sensor Devices Utilizing Dry Film Resist As Main Structural Materials, Sijia Gong

Masters Theses

"In this thesis, two types of fluidic sensor devices are demonstrated. The first device utilizes a dry film resist (DFR) as the main structural material of fluidic device utilizing the photolithography process. The second one involves a simple, low-cost sensor platform composed of ubiquitous materials such as polymer tubing and metal wires. Both devices are prepared to measure the dissolved oxygen content, as a model target analyte, based on the oxygen quenching reaction of a ruthenium complex fluorophore as the reporting agent. Characterization of sensors is conducted based on the fluorescence lifetime measurement. The first type of sensor is constructed …

Uterine Cervical Cancer Histology Image Feature Extraction And Classification, Cheng Lu

Masters Theses

"Cervical cancer, the second most common cancer affecting women worldwide and the most common in developing countries can be cured in almost all patients, if detected early and treated. However, cervical cancer incidence and mortality remain high in resource-poor regions, where early detection systems often cannot be maintained because of inherent complexity. The National Cancer Institute (NCI) has collected a vast amount of visual information, 100,000 cervigrams (35 mm color slides), screening thousands of women by this technique. In addition to the cervigrams, large digitized histology images are being archived.

In this research, a framework for automatic recognition and classification …

Implementation Of Project Based Learning Technique To Enhance Engineering Education, Dinesh Kanigolla

Masters Theses

"This study investigated the impact of introducing a semester project into three engineering courses where practical application of theoretical knowledge is applicable. Three courses were examined in this work: an undergraduate course in quality, a graduate course in Lean, and a graduate course in Six Sigma. For this research, student teams were given hands-on-projects that included collaboration with local companies. Surveys were conducted to assess the impact of project based learning on students' knowledge. Student responses were recorded and analyzed to determine how students felt the use of the semester project affected the course and to identify the response patterns …

Development Of A Postprocessor For A Multi-Axis Cnc Milling Center, Mihir Satish Adivarekar

Masters Theses

"Most of the current college design and manufacturing curricula are primarily focused on computer aided design (CAD), while less emphasis is given to computer aided manufacturing (CAM). A great opportunity has been missed as the benefits of CAD/CAM cannot then be fully learned. Postprocessor plays a vital role in integration of CAD//CAM with computer numerically controlled (CNC) machines. Hence, postprocessor must be developed accurately. This thesis is composed of one paper. Paper I proposes a novel methodology to determine compensation vectors for the post processor of multi-axis milling center. The new approach that has been implemented in Paper I involves …

Utilization Of Booster Fans In Underground Mines, Arash Habibi Javanbakht

Masters Theses

"Booster fans are large underground fans that can increase the volumetric efficiency of ventilation systems by balancing the pressure and quantity distribution throughout a mine, reducing leakage and reducing the total power requirement. The objective of this study is to provide potential users of booster fans with the necessary information on the design, installation and operation of main underground fans. The guidelines listed in this paper were formulated based on current U.S. and international standards, safe operating practices developed by the mining industry, and recommendations provided by fan manufacturers. The principles involved in the design and installation of booster fans …

A Generalized Approach For Compliant Mechanism Design Using The Synthesis With Compliance Method, With Experimental Validation, Ashish B. Koli

Masters Theses

"Compliant mechanisms offer numerous advantages over their rigid-body counterparts. The synthesis with compliance technique synthesizes compliant mechanisms for conventional rigid-body synthesis tasks with energy/torque specifications at precision positions. In spite of its usefulness, the method suffers from some limitations/problems. The purpose of this work is to investigate these sensitivities with the synthesis with compliance technique and improve upon existing method. A new, simple but efficient, method for synthesis with compliance using an optimization approach is proposed, and its usefulness and simplicity demonstrated over the existing method. The strongly and weakly coupled system of kinematic and energy/torque equations in the existing …

A Friction Prediction Model For Small Si Engines, Avinash Singh

Masters Theses

"A substantial portion of the input fuel energy in an SI engine is lost towards overcoming the frictional forces from various rubbing parts. These frictional losses are very significant in small engines and these losses can be reduced by incorporating some design changes. A semi-empirical friction prediction model was studied and modified with the help of the experimental results for small SI engines. This model is dependent upon engine geometry and speed. The model divides the frictional work into different sub-assemblies of the engine and these sub-assemblies are in turn divided to determine the friction associated with individual components. A …

Dynamic Contact Analysis Of A Piezoelectrically Driven Ultrasonic Crawler-Actuator, Dwight Santiago Maness

Masters Theses

"A standing wave ultrasonic motor (SWUM) is presented in this thesis. The actuator is piezoelectrically powered and operates in the first and second bending modes to move forwards and backwards, respectively. The kinematic stability of the crawler, backed by experimental results is shown in the first paper presented in this thesis. This study demonstrates that in the absence of a preload or kinematic constraints, the crawler shows vertical stability. A full transient analysis using the finite element method is performed characterizing the speed and contact variables is conducted in the second paper. The results show that given enough time the …

Cfd Simulation Of Void Flow In Eccs, Lifeng Wang

Masters Theses

"Emergency core cooling system (ECCS) has been studied extensively for reactor safety. Emergency core cooling system (ECCS) is designed to make sure the reactor core it is protected by providing sufficient heat removal during accident conditions. In a loss-of-coolant-accident (LOCA) scenario, the ECCS is designed to take over the reactor core cooling by drawing water from a reservoir or tank. Voids may be introduced into the ECCS through a variety of means leading to total or partial loss of suction supply, or through gas depressurization resulting from difference in gas saturation pressure and ambient pressure. The transportation of voids through …

Manual Modification And Plasma Exposure Of Boron Nitride Ceramic To Study Hall Effect Thruster Plasma Channel Material Erosion, Alexander J. Satonik

Masters Theses

"Worn Hall effect thrusters (HET) show a variety of unique microstructures and elemental compositions in the boron nitride thruster channel walls. Worn thruster channels are typically created by running test thrusters in vacuum chambers for hundreds of hours. Studies were undertaken to manually modify samples of boron nitride without the use of a hall effect thruster. Samples were manually abraded with an abrasive blaster and sandpaper, in addition to a vacuum heater. Some of these samples were further exposed to a xenon plasma in a magnetron sputter device. Sandpaper and abrasive blaster tests were used to modify surface roughness values …

Quantization Noise Analysis Of A Closed-Loop Pwm Controller That Includes Σ-Δ Modulation, Anupama Balakrishnan

Masters Theses

"Σ-Δ modulation is a popular noise shaping technique which is used to move the quantization noise out of the frequency band of interest. Recently, a number of authors have applied this technique to a pulse width modulation (PWM) controller for switching power converters. However, previous analysis has not incorporated the effects of analog-to-digital converter (ADC) resolution or feedback control on the Σ-Δ modulator. In this work, quantization due to ADC resolution and PWM resolution are analyzed, considering the effects of noise-shaping and feedback. A number of simulations have been performed to explore the impact of various design choices on output …

Paste Development And Co-Sintering Test Of Zirconium Carbide And Tungsten In Freeze-Form Extrusion Fabrication, Ang Li

Masters Theses

"Ultra-high temperature ceramics are being investigated for future use in aerospace applications due to their superior thermo-mechanical properties, as well as oxidation resistance, at temperatures above 2000°C. However, their brittle properties make them susceptible to thermal shock failure. Components fabricated as functionally graded materials (FGMs) can combine the superior properties of ceramics with the toughness of an underlying refractory metal by fabricating graded composites. This paper discusses the grading of two materials through the use of a Freeze-form Extrusion Fabrication (FEF) system to build FGMs parts consisting of zirconium carbide (ZrC) and tungsten (W). Aqueous-based colloidal suspensions of ZrC and …

Development Of A Methodology For Pseudo-Rigid-Body Models Of Compliant Segments With Inserts, And Experimental Validation, Raghvendra Sharadchandra Kuber

Masters Theses

"Compliant mechanisms have shown a great deal of potential in the last few decades in providing better solutions to design problems with numerous benefits; however, their use has been limited due to current challenges in the material selection. With ever increasing focus on the applications of compliant mechanisms, it is necessary to find alternatives to the existing materials and methods of prototyping. The purpose of this work is to develop a methodology for pseudo-rigid-body models of compliant segments with compliant inserts, comprised of a resilient material placed between the layers of a softer material, to alleviate any creep and strength …

Analysis Of Model Uncertainty In Hydraulic Modeling: The Bstem Application To The Osage River, Annabell Leigh Ulary

Masters Theses

"Uncertainty is inevitable when creating any kind of model. A model can be used in the most accurate way possible, if the uncertainties are understood. This study determines the level of uncertainty in the Bank Stability and Toe Erosion Model (BSTEM) of the Osage River downstream of Bagnell Dam between Lake Ozark, MO and Jefferson City, MO. The statistical analysis of the BSTEM model was performed using the aid of SAS statistical computer modeling software. There were 4 different analysis values used to determine the best fit model for all dependent variables. These values include the F-test, the coefficient of …

Comparison Of Class Ii Injection Well Area Of Review Requirements With Area Of Evaluation For Hydraulically Fractured Wells, Yashesh Jitendra Panchal

Masters Theses

"Since 2010 the US Environmental Protection Agency (EPA) has been proposing plans to study, and has now initiated research regarding the potential impact of hydraulic fracturing processes on drinking water sources. Their work refers to an 'Area of Evaluation' around a hydraulically fractured well, inferring that the wells immediately around hydraulic fractured wells should be studied, to evaluate the conditions of these wells and their potential to contaminate overlying USDWs. Class II injection wells must have a minimum 1/4 mile radius area of review to determine the condition of wells surrounding the proposed injection well. All wells within this AOR …

Robust Methods For Construction Of Global Potential Energy Surfaces, Phalgun Lolur

Masters Theses

"This thesis is about the development of robust methods for construction of global potential energy surfaces to study the spectroscopy and dynamics of molecular systems. A potential energy surface represents the electronic energy of a molecule as a function of its geometry. This is central to how chemists view molecular systems in terms of motion across a rich energy landscape where barriers separate wells corresponding to different stable structures. The range of molecular distortions defines the potential energy surface. Computing the potential energy surface of a molecule has become a fundamental operation in modern theoretical chemistry studies. The Born-Oppenheimer approximation …

Transmission Shaft Design For Hydrokinetic Turbine With Reliability Consideration, Goutham Pusapati

Masters Theses

"Hydrokinetic energy, a relatively new kind of renewable energy, can be generated from flowing water in rivers or oceans. Hydrokinetic turbines (HKTs) are a major system for hydrokinetic energy, and the reliability of the HKTs is critical for both their lifecycle cost and safety. The objective of this work is to apply advanced methodologies of reliability analysis and reliability-based design to the transmission shaft design for a horizontal-axis, non-submerged HKT. The deterministic shaft design is performed first by considering failure modes of strength and deflection using distortion energy, maximum shear and deflection theories. Then the reliability analysis of the shaft …

A Modification Of Freeze-Core Technology For Collecting Granular Fluvial Sediment Samples, David Charles Smith

Masters Theses

"The presence of coarse grained sediment can potentially reduce the effectiveness of conventional sampling methods in recovering fluvial sediments. A modification to freeze-core technology was used to collect fine grained sediments for the purpose of characterizing the extent of heavy metal contamination in fluvial deposits that contain significant amounts of coarse-grained material such as cobbles and boulders. This material greatly reduces the effectiveness of conventional sampling methods. This method uses 2.5-cm and 2.9-cm diameter by 30-cm long finned samplers that were mechanically- and hand-driven into the ground. The sediment is frozen to the outside of the sampler by injecting liquid …

Wolf Creek Dam: A Case Study Of Foundation Remediation For Dams Built On Karst Foundations, Kyla Justene Erich

Masters Theses

"Wolf Creek Dam was completed in 1952 as a 5,736-foot long and 258-foot high combination embankment-concrete gravity dam. Its storage capacity of 6 million acre feet makes it the ninth largest reservoir in the nation. The dam was built on a heavily karstified limestone foundation and began exhibiting signs of excess foundation seepage in late 1967. This led to extensive corrective work in the 1970s beneath the earthen core of the embankment to reduce underseepage. In 2006 an independent assessment by the Dam Safety Action Classification (DSAC) Peer Review Panel recommended that Wolf Creek Dam exhibited "Urgent and Compelling" foundation …

Water Management Capabilities Of Bio-Inspired Flow Field Configurations For Polymer Electrolyte Membrane Fuel Cells, Nicholas Warren Freer

Masters Theses

"Fuel cells have received an increasing amount of attention over the past decade for their power production capabilities. Polymer electrolyte membrane (PEM) fuel cells in particular are researched because of their high power density, large range of operating conditions, green products, and ease of scalability. PEM fuel cells do have a number of issues that reduce their overall performance. These issues include variations in reactant distribution, materials issues for the bipolar plate, and flooding caused by poor water management. Variations in the reactant distribution causes lower overall power output due to regions of low reactant density. This means that optimizing …

Green Roof Water Quality Impacts And Physicochemical Stability, Grace Ella Harper

Masters Theses

"Green roofs can provide environmental benefits and conserve energy; this research evaluated green roof stormwater management, nutrient loading, and erosion prevention for two green roof media. During a pilot study, the runoff quantity and composition from green roof material was evaluated continuously under field conditions for two different media, both tested under planted and unplanted conditions. Water quantity results show over a 40% reduction in runoff from just the growing media and over 60% reduction in runoff with established plants in green roof media over the eight month study. Previous studies have reported a "first flush" of excess nutrients but …

A New Approach To Nuclear Safeguard Enhancement Through Radionuclide Profiling, Aaron Dawon Peterson

Masters Theses

"The United States has led the effort to promote peaceful use of nuclear power amongst states actively utilizing it as well as those looking to deploy the technology in the near future. With the attraction being demonstrated by various countries towards nuclear power comes the concern that a nation may have military aspirations for the use of nuclear energy. The International Atomic Energy Agency (IAEA) has established nuclear safeguard protocols and procedures to mitigate nuclear proliferation. The work herein proposed a strategy to further enhance existing safeguard protocols by considering safeguard in nuclear fuel design. The strategy involved the use …

A Computational Study Of Driven Micro-Cavities In Supersonic Flat Plate Flow, Thomas Ryan Rehmeier

Masters Theses

"Driven micro-cavities embedded in the wall beneath turbulent supersonic boundary layers are analyzed using two-dimensional computational fluid dynamics. This concept is a passive flow control technique in which very small cavities formed by arrays of thin vertical walls are oriented transverse to the flow direction and underlie the boundary layer. The purpose is to reduce or eliminate skin friction drag. Various micro-cavity configurations were analyzed at locations (0.1 m and 1 m) downstream of the leading edges of flat plates, for free-stream Mach numbers of 1.2, 2.0, and 3.0. Results focus on net drag reduction achieved, cavity flow-field effects, perforation …

Effect Of Mix Parameters On Longevity Of Bituminous Mixtures, Clayton Reichle

Masters Theses

"This study was performed to evaluate the effects of varying aggregate sources, aggregate gradations on the stripping and rutting potential of bituminous based plant mixes specified by the Missouri Department of Transportation. The different aggregate combinations included two different aggregate sources (Potosi Dolomite and Jefferson City Dolomite) including two variations for the Jefferson City Dolomite mix to simulate a marginally in-specification mix and an out-of-specification but in-field tolerance mix. The "field" mix simulated the marginal mix where field tolerance of high dust and low binder content were maximized. All three mixes were evaluated for stripping susceptibility using the Tensile Strength …

Liquid Phase Sintering Of 20bi(Zn₀.₅Ti₀.₅)O₃-80batio₃ Dielectrics With Bismuth-Zinc-Borate And Bismuth Borosilicate Glasses, David I. Shahin

Masters Theses

"Dielectrics in the Bi(Zn₀.₅Ti₀.₅O₃-BaTiO₃ system (specifically 20BZT-80BT, in mol%) are promising candidates for high energy density capacitor applications due to broad temperature-dependent dielectric constant maxima and a relatively field-independent permittivity. Bulk samples require sintering temperatures of greater than 1180ºC to reach useful densities. Due to incompatibility of Bi with low-pO₂ processing, BZT-BT-based multilayer capacitors must utilize noble metal electrodes that resist oxidation during sintering. Sintering temperatures must be reduced to allow use of less expensive electrode materials (Cu, etc.). This work studies the reduced temperature sintering behavior and dielectric properties of BZT-BT sintered with 30 Bi₂O₃-30ZnO-40B₂O₃ and 50Bi₂O₃-25B₂O₃-25SiO₂ (mol%) liquid …

Design And Analysis Of An Open-Ended Waveguide Probe For Material Characterization, Matthew Alan Kempin

Masters Theses

"Nondestructive evaluation of stratified (layered) composite structures at microwave and millimeter wave frequencies is of great interest in many applications where simultaneous determination of the complex dielectric properties and thicknesses of multiple layers is desired. Open-ended rectangular waveguide probes are effective tools for this purpose. The technique requires a full-wave electromagnetic model that accurately calculates the complex reflection coefficient as a function of frequency and material properties. Subsequently, this information is used in conjunction with the measured complex reflection coefficient to evaluate the sought for material properties. This thesis presents simulated and measured data to investigate the influence that measurement …

New Sensorless, Efficient Optimized And Stabilized V/F Control For Pmsm Machines, Seyed Hesam Jafari

Masters Theses

"With the rapid advances in power electronics and motor drive technologies in recent decades, permanent magnet synchronous machines (PMSM) have found extensive applications in a variety of industrial systems due to its many desirable features such as high power density, high efficiency, and high torque to current ratio, low noise, and robustness. In low dynamic applications like pumps, fans and compressors where the motor speed is nearly constant, usage of a simple control algorithm that can be implemented with least number of the costly external hardware can be highly desirable for industry. In recent published works, for low power PMSMs, …