Engineering Commons^™

Investigation Of The Closing Forces Involved In Re-Approximation Of The Renal Remnant Following Partial Nephrectomy, Donald M. Endres Ii

Masters Theses

Partial nephrectomy has become the preferred method of treatment in certain renal diseases, including small, peripheral tumors. However, re-establishment of hemostasis in the remaining tissue remains a challenging procedure. To better understand the forces involved in re-approximation of the renal remnant, this study measures the suture tensions reached in sliding clip renorrhaphy, as well as the ability of the tissue to support those tensions, and reviews how long suture material might be expected to survive those forces.

Three separate groups of experiments were conducted on fresh, porcine kidney tissue. Treatment groups were compared using commercially available software to compute appropriate …

Feature Extraction Through Median-Split Algorithm Segmentation For Melanoma Detection, Venkata Sai Narasimha Kaushik Ghantasala

Masters Theses

""Detection of melanoma remains an empirical clinical science. New tools for automatic discrimination of melanoma from benign lesions in digitized dermoscopy images may allow an improvement in early detection of melanoma. This research implements a fast version of the median split algorithm in an open source format and applied to four-color splitting of the lesion area to capture the architectural disorder apparent in melanoma colors. This version of the median split algorithm splits colors along the color axis with maximum range". For a dermoscopy set of 888 images, K-means clustering algorithm is compared with a median split algorithm to find …

Comparison Of Square Root Of Time Approach And Statistical Approach To Minimize Subjectivity In The Determination Of Minimum In-Situ Stress, Soumitra Bhaskar Nande

Masters Theses

"A formation's minimum in-situ stress is an important parameter to determine for hydraulic fracturing. While minimum in-situ stress, and its orientation, can be measured from triaxial tests on core, it is more common to measure it as closure stress, by performing pressure testing of wells in the field. Closure stress is considered equal to, or a good approximation of the minimum in-situ stress for most cases. The analytical methods applied to such pressure testing include the square root of time plot, G function plot and the G-dP/dG plot. These plots require the engineer to fit tangent lines to the data, …

A New Method For Failure Modes And Effects Analysis And Its Application In A Hydrokinetic Turbine System, Liang Xie

Masters Theses

"The traditional failure modes and effects analysis (FMEA) is a conceptual design methodology for dealing with potential failures. FMEA uses the risk priority number (RPN), which is the product of three ranked factors to prioritize risks of different failure modes. The three factors are occurrence, severity, and detection. However, the RPN may not be able to provide consistent evaluation of risks for the following reasons: the RPN has a high degree of subjectivity, it is difficult to compare different RPNs, and possible failures may be overlooked in the traditional FMEA method. The objective of this research is to develop a …

An Evaluation Of De-Embedding Techniques For Tsvs, Nicholas Garrett Erickson

Masters Theses

"One of the most important aspects of modern electronic designs is device measurement and characterization. Without device measurement and characterization, the functionality of end designs cannot be guaranteed. At the silicon level (on-wafer), extracting the electrical performance of devices and structures has grown increasingly more complex with the continual shrink of feature sizes. Compared to the overall measurement setup (VNA, cables, probes, interposers, etc.), the ultra small size of on-wafer structures leads to their electrical performance being easily overshadowed by other, larger fixtures. Thus, many scientists and engineers have worked to devise ever more accurate calibration and de-embedding techniques for …

Part Height Control Of Laser Metal Additive Manufacturing Process, Yu-Herng Pan

Masters Theses

"Laser Metal Deposition (LMD) has been used to not only make but also repair damaged parts in a layer-by-layer fashion. Parts made in this manner may produce less waste than those made through conventional machining processes. However, a common issue of LMD involves controlling the deposition's layer thickness. Accuracy is important, and as it increases, both the time required to produce the part and the material wasted during the material removal process (e.g., milling, lathe) decrease. The deposition rate is affected by multiple parameters, such as the powder feed rate, laser input power, axis feed rate, material type, and part …

Fabry-Perot Interferometer Based Co₂ Sensor Using Ionic-Liquid, Mujahid Abdul

Masters Theses

"Anthropogenic greenhouse gas emission has become an eminent problem today especially CO₂ gas emission is of major importance. Statistics show that CO₂ concentration is consistently increasing in atmosphere every year. Having cognizance of this problem, better CO₂ absorbents, ionic liquids, has been suggested through this thesis. To prove Ionic liquid's efficiency, a unique sensor was developed by a sophisticated fabrication using Femto-second (fs) laser. Sensor is built to work as an extrinsic Fabry-Perot Interferometer (EFPI) to sense CO₂. EFPI sensor consists of a glass tube fused between two single mode fibers, and a miniature hole is fabricated in the tube …

Technical Modeling And Control System Development Of Hybrid Energy System Using Coal, Nuclear, Wind And Diesel, Uday Guntupalli

Masters Theses

"Addressing the growing energy concerns of the modern world is a challenging problem. Traditional carbon intensive fuel sources like coal, diesel which are instrumental in meeting today's grid demand are struggling to meet the stringent environmental regulations. Operations of independent renewable energy sources despite reducing costs are not comparable to existing costs of electricity. A sustainable approach to address these concerns is proposed in this work. A hypothetical hybrid system involving traditional fuel sources like coal, small modular nuclear reactor and renewable energy source wind is analyzed through dynamic modeling using various tools.

Various simulation tools were analyzed and the …

Field Performance Of Alternative And Cost Efficient Cast In Place And Precast Prestressed Concrete Bridge Approach Slabs, Nathan Price Muncy

Masters Theses

"In December of 2010, the Missouri Department of Transportation (MoDOT) investigated alternative cost-efficient bridge approach slabs (BASs). New BAS designs were subsequently developed and had a projected cost savings up to twenty-four percent with anticipated equal or better structural performance. A precast-prestressed (PCPS) BAS was introduced as an alternative to traditional BASs that offers advantages such as rapid construction and improved long-term durability. The three new BAS designs were implemented into in-situ bridge projects by MoDOT and the field performance was evaluated within this research study.

Field testing of each BAS was performed using two MoDOT HS20 trucks. Various instrumentation …

Parallel-Connected Solar Arrays, Majed Meshal Alabbass

Masters Theses

"The purpose of this thesis is to investigate the advantages of having various series-parallel configurations of solar arrays and make a comparison between them. The objective is to determine the best PV system configuration and thus improve the overall efficiency of a solar array. The primary focus of this thesis is to study the parallel connection of PV panels for achieving maximum efficiency while extracting maximum energy from the solar radiation. A comparison between a series connected and a parallel connected solar PV array justifies the need for installing a parallel configured solar PV array to achieve optimum performance. The …

Parameter Optimization For Controlling Aluminum Loss When Laser Depositing Ti-6al-4v, Richard Charles Barclay

Masters Theses

"The ability to predict the mechanical properties of engineering materials is crucial to the manufacturing of advanced products. In the aerospace industry, Ti-6Al-4V is commonly used to build structures. Any deviation from the alloy's standard properties can prove detrimental. Thus, the compositional integrity of the material must be controlled. The ability to directly build and repair large, complicated structures directly from CAD files is highly sought after. Laser Metal Deposition (LMD) technology has the potential to deliver that ability. Before this process can gain widespread acceptance, however, a set of process parameters must be established that yield finished parts of …

High Temperature Sensor Based On Fabry-Perot Interferometer In Ceramic Coaxial Cable, Kenneth Paul Smith Jr.

Masters Theses

"In this thesis, the application of a coaxial cable Fabry-Perot interferometer (CCFPI) as a high temperature sensor is analyzed. Coaxial cable sensors provide the advantages of fiber optic sensors, such as the ability to be embedded and multiplexed, while overcoming the limitations created by the fragility of fibers. The fabrication process of the CCFPI, using a computer controlled drill system to create holes in the cable is discussed. By analyzing the amplitudes of the created reflections, the diameter of the holes is optimized. A new fabrication process, in which holes are drilled 180⁰ apart from each other to create a …

Effects Of Machining Parameters And Cooling Strategies On Cutting Forces And Surface Integrity In High-Speed Slot End-Milling Of Titanium Alloy, Emenike Chukwuma

Masters Theses

“Paper 1 presents the results of the investigations of the effects of cooling strategies [Emulsion cooling, Minimum Quantity Lubrication (MQL) and Liquid Nitrogen (LN₂)] and machining parameters (feed rate and spindle speed) on cutting force components, cutting temperature and tool wear during slot end-milling of titanium Ti-6Al-4V workpiece. All machining experiments were conducted using four-flute 0.5 inch diameter uncoated solid carbide end-mill on Cincinnati Milacron, Sabre 750 vertical machining center equipped with Acramatic 2100 controller. Cutting force components were acquired and tool wear was indirectly measured from maximum cutting force variation per slot from the first pass to …

Automatic Detection Of Polypoid Skin Lesions: The Squash Sign, Saurabh G. Karnik

Masters Theses

“Earlier detection of malignant melanoma can save lives. Automatic in-vivo methods of melanoma detection including smart-phone applications are now available, but specificity is low, i.e. too many benign lesions are detected as possible melanomas. Polypoids, elevated and rounded lesions are one class of benign lesions. These raised lesions with piecewise circular borders, predominantly intradermal nevi and cutaneous polyps (IDNs), are always benign. Variegated coloring present in polypoid lesions can lead physicians to perform an unneeded biopsy. Contact dermatoscope plates with gel squash these lesions, leaving a “squash sign” marker of benignancy which can be automatically detected. We present a method …

Significance And Analysis Of Milia-Like Cysts In Dermoscopy Skin Lesion Images, Sneha K. Mahajan

Masters Theses

“Milia-like cysts (MLCs) are dermoscopic structures frequently observed in seborrheic keratoses(SKs), which are the most common type of skin lesions. Diverse appearances of these skin lesions make them difficult to differentiate from melanoma, a deadly type of skin cancer. Classified by size into two main groups, starry MLCs and cloudy MLCs, the presence of these structures in a skin lesion has been known to help differentiate benign lesions from melanoma. Though the presence of cloudy MLCs is not exclusively associated with SKs, they can be a useful tool to differentiate SKs from melanoma. This research study determines the statistical occurrence …

Effects Of Machining Parameters On Cutting Forces,Shear Angle And Friction In Orthogonal Turning Of Titanium Alloys, Hilary Onyishi

Masters Theses

“Paper 1 presents the results of the investigations on the effects of machining parameters on cutting forces, shear angle and friction in orthogonal turning of titanium alloy tube. Uncoated fine-grained cemented tungsten carbide (WC/Co) and Physical Vapour Deposition (PVD) TiAlN coated grade turning tool inserts, with 5⁰ and 15⁰ rake angles were used under low and high cutting speeds of 120 and 240m/min, at three different feedrates (0.05, 0.075 and 0.1 mm/rev). The experiments were conducted under flooded coolant to reflect what is practically obtainable in manufacturing industries. The experimental results show that cutting forces at two selected cutting speeds …

Rotary Displacement Piezoelectric Energy Harvester, Headman Sanei

Masters Theses

“This study proposes a novel piezoelectric energy harvester for rotary motion applications. It is based on an annular unimorph plate, mounted on a shaft rotating at a constant angular velocity, under constant amplitude point-wise force. The mathematical model and the analysis was proposed for the inverse problem of a rotating disk under a static stationary force. The disk, however, is assumed to be stationary subjected to a traveling force. The distributed parameter electromechanical equations governing the behavior of the system are provided in closed-form, incorporating both an AC and a simple rectifier circuit. The performance of the energy harvester was …

Manufacturing And Characterization Of Polyurethane Based Sandwich Composites, Stephen Robert Hawkins

Masters Theses

"Composite sandwich structures have been extensively employed in aerospace structures, ship building, infrastructure, etc. due to their light weight and high strength to weight ratio. The understanding of their behavior under impact and environmental conditions is extremely important for the design and manufacturing of these engineering structures since these problems are directly related to structural integrity and safety requirements. Vacuum assisted resin transfer molding (VARTM) is one of the commonly used low cost composite manufacturing processes. Polyurethane (PU) resin system has been observed to have better mechanical properties and higher impact strength when compared to conventional resin systems such as …

Gas And Water Flow Through Nanoscale Porous Media, Songyuan Liu

Masters Theses

"This work provides a lab experiment to describe the fluid diffusion in nanoscale porous media. By using ideal ceramic membranes which have uniform pore size in nanoscale and homogeneous pore distribution instead of shale or tight sandstone which have various pore sizes and complicated pore distribution and structure, a better understanding of fluid flow through nanoscale porous media could be gained.

Core flooding test were conducted by injecting nitrogen and water separately to describe gas and liquid flow in nanoscale porous media. With all the other factors known or controlled, pressure and flow rate were measured to calculate permeability. By …

Predicting Solar Radiation Based On Available Weather Indicators, Frank Joseph Sauer

Masters Theses

"Solar radiation prediction models are complex and require software that is not available for the household investor. The processing power within a normal desktop or laptop computer is sufficient to calculate similar models. This barrier to entry for the average consumer can be fixed by a model simple enough to be calculated by hand if necessary.

Solar radiation modeling has been historically difficult to predict and accurate models have significant assumptions and restrictions on their use. Previous methods have been limited to linear relationships, location restrictions, or input data limits to one atmospheric condition. This research takes a novel approach …

Feature Extraction Through K-Means Segmentation For Melanoma Detection, Snigdha Priya Bommadevara

Masters Theses

"Malignant melanoma is responsible for 75% of the deaths caused due to skin cancer annually. However, melanoma detection can be possible through feature extraction and pattern classification, which can lower the risk, if the melanoma is detected at an early stage. Clustering is one of the most useful tools used to differentiate features that can contribute to melanoma. This research work uses the k-means clustering algorithm for implementation of color segmentation. However, k-means clustering requires a predefined value of k, i.e., the number of clusters must be specified at the beginning of the run. This research uses a predefined value …

Fuzzy Logic Color Detection: Blue Areas In Dermoscopy Melanoma Images, Mounika Lingala

Masters Theses

"Malignant melanoma is one of the deadliest forms of skin cancer and is one of the most rapidly increasing cancers in the world. Image analysis techniques for the early detection of melanoma are dependent upon the detection of multiple color shades in melanoma images. Use of magnified visible-light imaging by dermoscopy allows detailed investigation of these color shades. This research explores the fuzzy logic methods for the detection and characterization of blue color shades to discriminate melanoma from benign skin lesions. Standard thresholds are placed on the RGB dermoscopy images firstly and then the restrictiveness is explored by implementing fuzzy …

Development Of Marker-Based Human Motion Capture Systems For Assembly Simulation And Ergonomic Analysis, Sajeev C. Puthenveetil

Masters Theses

"In aerospace industry, the assembly operator is often exposed to potential ergonomic injuries due to awkward postures while working in confined spaces. Manually generating worker postures in simulation software for ergonomic analysis is cumbersome. This research focuses on the use of marker-based optical motion capture technology to generate human motion simulations in real-time for ergonomic analysis. To address the challenges involved in capturing human motions in a real work environment, an assembly operation was simulated in a four-walled Computer Automated Virtual Environment (CAVE) which provides an immersive 3D environment to the worker performing the assembly operation. Multiple cameras were set-up …

A Conforming Method For Regional Marginal Loss Surplus Allocation, Xiaolong Wang

Masters Theses

"The marginal transmission loss model is used in electricity markets across the United States to measure a resource's marginal contribution to system loss. This model prices loss into the locational marginal price as a marginal loss component. Marginal loss pricing will render a net revenue surplus within an energy balanced system. This marginal loss surplus (MLS) is typically allocated back to scheduling coordinators in proportion to the measured demand on a system-wide basis. However, when the system experiences heterogeneous loss across different regions, the system-wide allocation method fails to recognize the regional differences in actual loss costs. As a result, …

Distribution And Occurrence Of Escherichia Coli In Water And Sediments At Grand Glaize Beach In Lake Of The Ozarks State Park, Jordan Lee Wilson

Masters Theses

"Public swimming beaches at the Lake of the Ozarks State Park (LOSP) are popular vacationing spots for many Missourians; however, on several occasions Escherichia coli (E. coli) concentrations have exceeded standards set by the Missouri Department of Natural Resources (MDNR). Exceedances lead to beach closures which not only represent a potential public health threat but are also detrimental to the local economy and the public's perception of the lake's general water quality. In a collaborative effort between Missouri S&T, the United States Geological Survey (USGS) and the MDNR, an in-depth, two-summer study was conducted which included collection of …

Development Of A New Temporary Fastener For Aerospace Automation, Xiangwen Zhang

Masters Theses

"Temporary fasteners are required in aircraft assembly, especially in the assembly of wings, fuselage, and aircraft skin's substructure prior to drilling holes for permanent fasteners by automated drilling machines. The objective was to develop a temporary fastener that can be installed, clamped, loosened, and removed from one side with a short head length. Published papers, web pages and patents relating to temporary fasteners were reviewed. Then by considering the ability to meet the operation requirements and concerns, a temporary fastener was designed with the following advantages:

• a simple structure that can be easily fabricated
• a short head length to save …

Manufacturing And Performance Evaluation Of Out-Of-Autoclave Sandwich Composites, Sriram Nagarajan

Masters Theses

"Composite sandwich structures are being increasingly employed in applications which require high strength, high in-plane and flexural stiffness coupled with a reduction in weight. Sandwich composites used in the aerospace industry are typically manufactured using high pressure autoclave processing which is expensive and time consuming. A viable low cost alternative is the Out-of-autoclave (OOA) process. One of the most dominant failure modes in sandwich composites is the debonding that occurs at the facesheet skin to core interphase leading to severe degradation of structural properties of the sandwich. A well formed adhesive bond at the skin to core interphase and improved …

Dynamic Mechanical Analysis And Computer Simulation Of Polyurea Aerogels, Victoria Ann Prokopf

Masters Theses

"Historically, the use of aerogels has been limited due to their poor mechanical properties. However, polyurea aerogels have proven to be mechanically strong under quasi-static conditions. Polyurea aerogels can be created by filling molds of the desired shape with a liquid solution that then creates a solid gel filled with liquid. The liquid can be removed from the gel by supercritical drying. This thesis outlines dynamic testing as well as simulation for polyurea aerogels.

Testing has been conducted in dynamic tension and bending for densities of polyurea aerogels ranging from 0.12 g/cm³ to 0.31 g/cm³. In most …

Enhancement Of Vortex Induced Vibrations Using Roughness Strips, Ashwin Vinod

Masters Theses

"The current experimental work focuses on studying the effects of surface roughness on vortex induced vibration (VIV) of an elastically mounted circular cylinder which is free to vibrate in a direction transverse to the flow. Flow separation in known to occur due to viscous effects when a fluid flows over a bluff body. The separation of fluid causes shedding of alternating vortices in the downstream region, which in turn impart an alternating force on the bluff body. The vibrations incurred due to such forces are called as Vortex Induced Vibrations (VIV) and have been traditionally known to be harmful to …

Processing Of Continuous Fiber Reinforced Ceramic Composites For Ultra High Temperature Applications Using Organosilicon Polymer Precursors, James Robert Nicholas

Masters Theses

"The current work is on the development of continuous fiber reinforced ceramic materials (CFCCs) for use in ultra high temperature applications. These applications subject materials to extremely high temperatures (> 2000⁰C). Monolithic ceramics are currently being used for these applications, but the tendency to fail catastrophically has driven the need for the next generation of material. Reinforcing with continuous fibers significantly improves the toughness of the monolithic materials; however, this is a manufacturing challenge. The development of commercial, low-viscosity preceramic polymers provides new opportunities to fabricate CFCCs. Preceramic polymers behave as polymers at low temperatures and are transformed into ceramics …