Engineering Commons^™

An Inverse Design Method For Supersonic Airfoils, Steven Edward Skare

Master's Theses

Airfoil design is one of the most important aspects of aircraft design. Slight changes in airfoil geometry can lead to significant changes in a wide variety of aircraft performance metrics. Inverse design methods offer an efficient alternative to standard direct methods. The key to this design problem is to derive a direct relationship between changes in airfoil geometry and changes in pressure or velocity distributions. This relationship is then used to modify an initial airfoil and its pressure distribution to match a target pressure distribution, which is specified by design parameters. At this point, the engineer now has a final …

Efficiency Performance Improvement Using Parallel Dc-Dc Converters With A Digital Controller, Daniel Forbes

Master's Theses

A system to improve efficiency performance of a DC-DC converter is simulated and built. The proposed system combines multiple DC-DC converters in parallel and implements a digital control scheme and load-share controller. A model of the system is developed in MATLAB Simulink and the model demonstrates the improved converter’s efficiency particularly at low load conditions. This simulation is then designed into a hardware system running three DC-DC converters in parallel, controlled by a microcontroller and a load-share controller. The hardware also confirms the simulation results, although some hardware refinements are evident as simulation results are superior. The system is designed …

Best Management Practices Effectiveness To Reduce Sediment Transport To Morro Bay, Michael J. Randall

Master's Theses

The Morro Bay Watershed, which is located inSan Luis Obispo County,California, covers more than 48,000 acres of land and discharges intoMorroBaythrough the Morro Bay National Estuary (MBNE). The Chorro Creek Subwatershed consists of approximately 30,000 acres of the overall watershed. The MBNE provides an ecosystem that supports a variety of wildlife from the common sea gull to the endangered sea otter. The estuary is also home to over 200 species of birds. The operational waterfront of theMorroBayHarborwas and continues to be a strong supporter to the local economy of the City of Morro Bay. Numerous studies were conducted since the …

Mechanical Properties Of Bone Due To Sost Expression: A 3-Point Bending Assessment Of Murine Femurs, Kainoa John Peterson

Master's Theses

Sclerostin, a protein coded for by the SOST gene, is an osteocyte-expressed negative regulator of bone formation. The absence of SOST in the genome may have an effect on bone formation both during skeletal maturation and full maturity. This study attempts to determine significant differences in the mechanical properties of bone that expresses SOST compared to bone that does not. One hundred femur samples from 6, 8, and 12 month old mice were obtained from Lawrence Livermore National Labs and loaded until failure using three-point bending. Results showed significant differences in treatment group effects for cross sectional area, yield force, …

Latent Heat Thermal Energy Storage With Embedded Heat Pipes For Concentrating Solar Power Applications, Christopher Robak

Master's Theses

An innovative, novel concept of combining heat pipes with latent heat thermal energy storage (LHTES) for concentrating solar power (CSP) applications is explored. The low thermal conductivity of phase change materials (PCMs) used in LHTES presents a design challenge due to slow heat transfer rates during heating and cooling of the material. Heat pipes act to decrease the thermal resistance in the PCM, increasing the overall heat transfer rate sufficiently for use in CSP. First, a laboratory scale experiment is presented to validate the concept of using heat pipes in LHTES to reduce thermal resistance in PCM. A commercial scale …

Detection Of Sk2 Channels On Hippocampal Neurons, Jamie L. Maciaszek

Master's Theses

Calcium-activated small conductance potassium channels (SK) are crucial for synaptic plasticity, sleep, and learning and memory (Hammond, Bond et al. 2006; Cueni, Canepari et al. 2008; Lin, Lujan et al. 2008). Despite the recent progress on SK channel physiology, the precise spatial organization of SK channels in neurons has remained unknown. Such knowledge is critical as the subcellular distribution of SK channels is an important determinant of neuronal excitability. Currently, there are no techniques to image ion channel distribution quantitatively at the nanometer scale in living cells. Here, it is demonstrated that integration of natural toxins with single molecule atomic …

Performance Based Analysis Of A Steel Braced Frame Building With Buckling Restrained Braces, Margaux Claire Burkholder

Master's Theses

This paper provides an assessment of the seismic performance of a code-designed buckling restrained braced frame building using the performance-based analysis procedures prescribed in ASCE 41-06. The building was designed based on the standards of the ASCE 7-05 for a typical office building located in San Francisco, CA. Nonlinear modeling parameters and acceptance criteria for buckling restrained brace components were developed to match ASCE 41-06 design standards for structural steel components, since buckling restrained braces are not currently included in ASCE 41-06. The building was evaluated using linear static, linear dynamic, nonlinear static and nonlinear dynamic analysis procedures. This study …

The Impact Of Increased Collateral Flow On Transverse Arteriolar Microvascular Tree Morphology, David Danzeiser

Master's Theses

The goal of this study was to understand how arteriogenesis impacts transverse arteriolar tree structure. The previous process involved a vascular casting technique that utilized black India ink as the casting agent and manual measurement of vessel morphology with ImageJ. This study decreased the complexity of the casted samples by using a casting compound called Microfil. Microfil’s viscosity can be adjusted and through experimentation, a viscosity was found that stopped at the capillary level, allowing only the arterial side of the circulation to be casted. A macro in ImageJ was written to help with morphological measurement by bundling vessel length …

Investigation Of Bacillus Subtilis As A Biopesticide Against Botrytis Cinerea, Kenneth K. Ng

Master's Theses

The objective of this thesis was to investigate BiOWiSH^TM-Aqua, a commercial dry solid formulation containing a consortium of bacteria and yeast, as a biopesticide for treatment of Botrytis cinerea, a gray mold that affects strawberries. BiOWiSH^TM-Aqua was compared with another commercial product specifically used as a fungicide and bacteriocide, Serenade® Garden Disease Control Spray (concentrated Bacillus subtilis strain QST 713). Both laboratory tests as well as in vivo lab tests were conducted. BiOWiSH^TM-Aqua results varied widely from plate to plate, regardless of experimental conditions. In some of these plates, inhibition zones were observed …

Evaluating Alternative Hydraulic Solutions To Limit Nutrient Contamination Of An Aquifer In Southern California, Jake Mendoza Perry

Master's Theses

Many small communities depend on groundwater sources for drinking water and they often use septic tanks for their sewer system needs. However, nitrates and other pollutants from septic systems can percolate to the aquifers and deteriorate quality of the groundwater, threatening the public health. This study has developed a groundwater model using Visual MODFLOW for an aquifer that is used as a water supply source for the cities of Beaumont and Cherry Valley, California. Septic systems are the suspected major source of nitrate contamination of the aquifer. The model has been developed to clarify the extent of interactions between nitrate …

Combustion Simulations Using Graphic Processing Units, Mingjie Wang

Master's Theses

Graphic processing units (GPUs) are powerful graphics engines featuring high levels of parallelism and extreme memory bandwidth, which constitute a powerful computing platform to solve complex problems involving chemically reacting flows. In the present study, computer programs for combustion simulations with detailed chemical kinetic mechanisms were compiled in the Compute Unified Device Architecture (CUDA) language for NVIDIA GPU architecture. Ignition processes were simulated under constant pressure and constant volume conditions using an explicit 4^th order Runge-Kutta algorithm for time integration. Sufficiently small time steps were identified with time scale analysis to ensure the integration stability. The program was validated …

Quantifying The Life Cycle Benefits Of Performance-Based Design In Sustainable Design, David Isaac Carmona

Master's Theses

ABSTRACT

Quantifying the Life Cycle Benefits of Performance-Based Design in Sustainable Design

David Carmona

For this thesis, a method is developed and tested for use with performance based design to quantify the sustainable and financial benefits of designing buildings to a structural performance level higher than Life-Safety. This paper starts to answer the question, “which would be a better investment: build structures to a performance level of Immediate Occupancy (IO) with the likelihood of less damage and downtime after an earthquake or continue to build to the building code’s implied minimum performance level of Life-Safety (LS)?”

An ASCE 7-05 designed …

Nonlinear Uav Flight Control Using Command Filtered Backstepping, Brian M. Borra

Master's Theses

The aim of this effort is to implement a nonlinear flight control architecture, specifically flight path control via command filtered backstepping, for use in AME UAS's Fury® 1500 unmanned flying wing aircraft. Backstepping is a recursive, control-effort minimizing, constructive design procedure that interlaces the choice of a Lyapunov function with the design of feedback control. It allows the use of certain plant states to act as intermediate, virtual controls, for others breaking complex high order systems into a sequence of simpler lower-order design tasks.

Work herein is a simplified implementation based on publications by Farrell, Sharma, and Polycarpou. Online approximation …

Beneficial Reuse Of Corrugated Paperboard In Civil Engineering Applications, Gregory M. Stone

Master's Theses

Abstract

Beneficial Reuse of Corrugated Paperboard in Civil Engineering Applications

Gregory Michael Stone

An investigation was conducted to explore the potential for reuse of corrugated paperboard. Corrugated paperboard represents a large fraction of the municipal solid waste generated and discarded in the United States. Alternative applications for reuse can provide a significant benefit by reducing the volume of waste being disposed and by reducing the use of raw materials. Four civil engineering applications were examined for potential beneficial reuse of corrugated paperboard: slurry trench construction, vertical drilling, directional drilling, and controlled low strength materials (CLSM).

For the purpose of this …

Experimental Investigation Of A 2-D Air Augmented Rocket: High Pressure Ratio And Transient Flow-Fields, Josef S. Sanchez

Master's Theses

A 2-D Air Augmented Rocket, the Cal Poly Air Augmented Rocket (CPAAR) Test Apparatus operating as a mixer-ejector was tested to investigate high stagnation pressure ratio and transient flow fields of an ejector. The primary rocket ejector was supplied with high pressure nitrogen at a maximum chamber pressure of 1758 psia and a maximum mass flow rate of 1.4 lb/s. The secondary flow air was entrained from a fixed volume plenum chamber producing pressures as low as 3.3 psia. The maximum total pressure ratio achieved was 221. The original CPAAR apparatus was rebuilt re-instrumented and capability expanded. A fixed volume …

Development Of A Standardized Method For Comparing Biomechanical Properties Of Various Sternal Closure Techniques, Ramzi P. Hawit

Master's Theses

Background:

33.6% of all deaths in America are caused by cardiovascular disease. An estimated 82.6 million adults (>1 in 3) in America have some form of cardiovascular disease. There were over 400,000 bypass surgeries requiring open-heart surgery. Sternal dehiscence is associated with a morbidity rate of over 47% if mediastinitis supervenes. A rigid closure is required to avoid healing complications, and wire, plates, and bands are all used in an attempt to make a better closure. The purpose of this study it to compare multiple closures and validate a new testing method.

Methods:

Polyurethane foam blocks will be used, …

Dc Dielectrophoretic Assisted Anti-Fouling Filtration System, Nathan M. Cohen

Master's Theses

Filtration processes, whether on the microfluidic, clinical treatment systems, or industrial scale (e.g., point-of-care diagnostics, dialysis, and biopharmaceutical manufacturing, respectively), are often inseparable from membrane clogging (fouling). As a consequence, most, if not all, filtration systems require frequent maintenance to maintain functionality and efficiency. The thesis of this project hypothesizes that Dielectrophoresis can be combined with standard filtration to reduce filter fouling, extending membrane life, and enabling continuous operation. This project investigates a method to reduce fouling, add specificity and efficiency, and decrease the cost and challenge of filtration based biofluid separations.

To substantiate this thesis, we designed, fabricated, and …

Effect Of End-Plate Tabs On Drag Reduction Of A 3d Bluff Body With A Blunt Base, Jarred Michael Pinn

Master's Theses

This thesis involves the experimental testing of a bluff body with a blunt base to evaluate the effectiveness of end-plate tabs in reducing drag. The bluff body is fitted with interchangeable end plates; one plate is flush with the rest of the exterior and the other plate has small tabs protruding perpendicularly into the flow. The body is tested in the Cal Poly 3ft x 4ft low speed wind tunnel. Testing is conducted in three phases.

The first phase was the hot-wire measurement of streamwise velocity of the near wake behind the bluff body. An IFA300 thermal anemometry system with …

Mechanical Integration Of A Versatile Air Suspension Into A Powered Wheelchair, Joel Michael Steinkraus

Master's Theses

Mechanical Integration of a Versatile Air Suspension into a Powered Wheelchair

Joel Steinkraus

It is undeniable that the vibration environment created by prolonged exposure to wheelchair use can cause discomfort for the rider and put him/her at risk of developing more severe medical conditions. While more research must be done to accurately quantify what constitues a harmful vibration environment, improved vibraiton isolation is an essential step. In order to incorporate structurally sound and effetive air suspension systems into motorized wheelchairs, a support structure is necessary. An after market wheelchair suspension system was designed, modeled, built and tested. Approximately 18 inches …

Bridge Design For Earthquake Fault Crossings – Synthesis Of Design Issues And Strategies, Osmar Rodriguez

Master's Theses

This research evaluates the seismic demands for a three-span curved bridge crossing fault-rupture zones. Two approximate procedures which have been proved adequate for ordinary straight bridges crossing fault-rupture zones, i.e., the fault-rupture response spectrum analysis (FR-RSA) procedure and the fault-rupture linear static analysis (FR-LSA) procedure, were considered in this investigation. These two procedures estimate the seismic demands by superposing the peak values of quasi-static and dynamic bridge responses. The peak quasi-static response in both methods is computed by nonlinear static analysis of the bridge under the ground displacement offset associated with fault-rupture. In FR-RSA and FR-LSA, the peak dynamic responses …

An Interactive Visualization Model For Analyzing Data Storage System Workloads, Steven Charubhat Pungdumri

Master's Theses

The performance of hard disks has become increasingly important as the volume of data storage increases. At the bottom level of large-scale storage networks is the hard disk. Despite the importance of hard drives in a storage network, it is often difficult to analyze the performance of hard disks due to the sheer size of the datasets seen by hard disks. Additionally, hard drive workloads can have several multi-dimensional characteristics, such as access time, queue depth and block-address space. The result is that hard drive workloads are extremely diverse and large, making extracting meaningful information from hard drive workloads very …

The Design And Fabrication Of A Microfluidic Reactor For Synthesis Of Cadmium Selenide Quantum Dots Using Silicon And Glass Substrates, Peter Robert Gonsalves

Master's Theses

A microfluidic reactor for synthesizing cadmium selenide (CdSe) quantum dots (QDs) was synthesized out of a silicon wafer and Pyrex glass. Microfabrication techniques were used to etch channels into the silicon wafer. Holes were wet-drilled into the Pyrex glass using a diamond-tip drill bit. The Pyrex wafer was anodically bonded to the etched silicon wafer to enclose the microfluidic reactor. Conditions for anodic bonding were created by exposing the stacked substrates to 300V at ~350oC under 5.46N of force. A syringe containing a room temperature CdSe solution was interfaced to the microfluidic reactor by using Poly (dimethylsiloxane) (PDMS) as an …

Polar Field Oriented Control With 3rd Harmonic Injection, Martin Todd Hess

Master's Theses

Abstract

POLAR FIELD-ORIENTED CONTROL

with

3^RD HARMONIC INJECTION

Martin Todd Hess

Field Oriented Control (FOC), also known as vector control, is a widely used and well documented method for controlling Permanent-Magnet Synchronous Motors (PMSM) and induction motors. Almost invariably the orientation of the stator and rotor (field) fluxes are described in rectangular coordinates. In this thesis we explore the practicality of using polar coordinates.

Third harmonic injection is also a well-known technique that allows full utilization of the bus (DC-link), thus allowing the motor to run to full base speed without the use of field weakening. This technique potentially …

Pico-Satellite Integrated System Level Test Program, Marcus A. Ruddy

Master's Theses

Testing is an integral part of a satellite’s development, requirements verification and risk mitigation efforts. A robust test program serves to verify construction, integration and assembly workmanship, ensures component, subsystem and system level functionality and reduces risk of mission or capability loss on orbit.

The objective of this thesis was to develop a detailed test program for pico-satellites with a focus on the Cal Poly CubeSat architecture. The test program established a testing baseline from which other programs or users could tailor to meet their needs. Inclusive of the test program was a detailed decomposition of discrete and derived test …

Experimental Investigation Of Suction Slot Geometry On A Goldschmied Propulsor, Nicole M. Thomason

Master's Theses

The Goldschmied Propulsor concept combines boundary layer suction and boundary layer ingestion to improve propulsive efficiency and reduce drag on an axisymmetric body. This investigation of a Goldschmied Propulsor aimed to determine influential characteristics of the suction slot geometry to aid in better slot geometry design and to decrease the suction flow requirements for maintaining attached flow over the entire model surface. The Propulsor model was 38.5 inches in length with a max diameter of 13.5 inches. Three suction slot geometries were investigated with the addition of aluminum cusps to the slot entrance. The cusps varied in the distance they …

Design And Analysis Of A Reusable N2o-Cooled Aerospike Nozzle For Labscale Hybrid Rocket Motor Testing, Daniel Joseph Grieb

Master's Theses

A reusable oxidizer-cooled annular aerospike nozzle was designed for testing on a labscale PMMA-N₂0[1] hybrid rocket motor at Cal Poly-SLO.[2] The detailed design was based on the results of previous research involving cold-flow testing of annular aerospike nozzles and hot-flow testing of oxidizer-cooled converging-diverging nozzles. In the design, nitrous oxide is routed to the aerospike through a tube that runs up the middle of the combustion chamber. The solid fuel is arranged in an annular configuration, with a solid cylinder of fuel in the center of the combustion chamber and a hollow cylinder of fuel lining …

Dynamic Model Creation And Scripting Support In The Horizon Simulation Framework, Brian Jeffrey Butler

Master's Theses

Dynamic model creation and support for the Lua scripting language was added to the Horizon Simulation Framework used for the verification and validation of system-level requirements. The addition of scripting support allows for subsystem models and their algorithms to be defined using a simpler scripting language, rather than C++. The Luabind library by Rasterbind software is used to expose the C++ algorithms and classes to Lua that are already defined in the framework. Interoperability between Lua and C++ code allows for the ease of use of a scripting language while utilizing the utility classes and functions already created. The dynamic …

Second Generation Data-Logging System For Long-Duration Field Measurement Of Vibration Exposure And Grip Force, Robert H. Knapp Iii

Master's Theses

Millions of United States workers are exposed to vibration at their job, whether it is from a power tool that causes hand and arm vibration or from heavy machinery. These vibrations are known to result in physical disorders such as Hand-Arm Vibration Syndrome, which can be debilitating to the point where workers can no longer do their job effectively. Research groups have taken an interest in finding what vibration characteristics are most harmful and choose to record vibration information using data-logging devices. Often, many devices, whether they are commercial or custom-built devices, use frequency weightings and full day estimations to …

Characterization Of Mixing In A T-Style Microfluidic Chip, Brian Eric Harley

Master's Theses

The goal of this study is to characterize the mixing that occurs in a microfluidic chip. To characterize the mixing, the minimum length to complete mixing and evolution of mixing will be investigated. There are two types of mixing that occur within a microfluidic channel, diffusion and advection. In the beginning of the microfluidic chip, diffusion is the dominant form of mixing, and in the later portion of the microfluidic chip advection is the dominant form of mixing. The type of design used for this experiment was a zig zag geometry microfluidic chip with channel dimensions of 60 µm X …

Kinetic Modeling Of Methanol Synthesis From Carbon Monoxide, Carbon Dioxide, And Hydrogen Over A Cu/Zno/Cr2o3 Catalyst, Daaniya Rahman

Master's Theses

The main purpose of this study was to investigate kinetic models proposed in the

literature for methanol synthesis and select the best fit model using regression techniques

in POLYMATH. Another aim was to use the results from the best fit model to explain

some aspects and resolve some questions related to methanol synthesis kinetics. Two

statistically sound kinetic models were chosen from literature based on their goodness of

fit to the respective kinetic data. POLYMATH, the non-linear regression software, was

used to fit published experimental data to different kinetic models and evaluate kinetic

parameters. The statistical results from POLYMATH were …