Engineering Commons^™

A Resistance Based Structural Health Monitoring System For Composite Structure Applications, Dennis N. Boettcher

Master's Theses

This research effort explored the possibility of using interwoven conductive and nonconductive fibers in a composite laminate for structural health monitoring (SHM). Traditional SHM systems utilize fiber optics, piezoelectrics, or detect defects by nondestructive test methods by use of sonar graphs or x-rays. However, these approaches are often expensive, time consuming and complicated.

The primary objective of this research was to apply a resistance based method of structural health monitoring to a composite structure to determine structural integrity and presence of defects.

The conductive properties of fiber such as carbon, copper, or constantan - a copper-nickel alloy - can be …

Accelerating Ray Casting Using Culling Techniques To Optimize K-D Trees, Anh Viet Nguyen

Master's Theses

Ray tracing is a graphical technique that provides realistic simulation of light sources and complex lighting effects within three-dimensional scenes, but it is a time-consuming process that requires a tremendous amount of compute power. In order to reduce the number of calculations required to render an image, many different algorithms and techniques have been developed. One such development is the use of tree-like data structures to partition space for quick traversal when finding intersection points between rays and primitives. Even with this technique, ray-primitive intersection for large datasets is still the bottleneck for ray tracing.

This thesis proposes the use …

The Effect Of A Low-Velocity Impact On The Flexural Strength And Dynamic Response Of Composite Sandwiches With Damage Arrestment Devices, Kodi A. Rider

Master's Theses

Impact strength is one of the most important structural properties for a designer to consider, but is often the most difficult to quantify or measure. A constant concern in the field of composites is the effect of foreign object impact damage because it is often undetectable by visual inspection. An impact can create interlaminar damage that often results in severe reductions in strength and instability of the structure. The main objective of this study is to determine the effectiveness of a damage arrestment device (DAD) on the mechanical behavior of composite sandwiches, following a low-velocity impact. A 7.56-lb_f crosshead …

An Experimental Investigation Of A Goldschmied Propulsor, Joshua Roepke

Master's Theses

A wind tunnel investigation of an axisymmetric bluff body, known as a Goldschmied propulsor, was completed. This model conceptually combines boundary layer control and boundary layer ingestion into a single complementary system that is intended to use energy to reduce the axial force on the body by eliminating separation and increasing the pressure recovery aft of the body’s maximum thickness. The goal of the current project was to design, fabricate, and fully document the performance of a wind tunnel model incorporating the Goldschmied propulsor concept and complete an examination of its aerodynamic performance. The investigation took place at California Polytechnic …

Improved Microalgal Biomass Harvesting Using Optimized Environmental Conditions And Bacterial Bioflocculants, Derek C. Manheim

Master's Theses

ABSTRACT

IMPROVED MICROALGAL BIOMASS HARVESTING USING OPTIMIZED ENVIRONMENTAL CONDITIONS AND BACTERIAL BIOFLOCCULANTS

DEREK CONTE MANHEIM

The cost and energy balance of microalgae biofuel production is sensitive to the algae harvesting method, among many other factors. Bioflocculation and settling of suspended microalgae cultures is a harvesting method with potentially low cost and energy input. However, bioflocculation (the spontaneous flocculation of algal cells without chemical addition) has not been a reliable process with cultures grown in ponds. To provide insights to help improve algae settling, factors affecting the settling of algae were investigated in the laboratory using pure cultures of two common …

Engineering Performance Of Polymer Amended Soils, Gary E. Welling

Master's Theses

A laboratory test program was undertaken to evaluate a series of engineering properties over a range of soil types; amendment types and addition rates; and moisture contents to enhance understanding of the engineering significance of polymer amendment. Four soils were manufactured and tested with varying ranges of fines and plasticity. A proprietary elastic copolymer was tested at addition rates of 0.5% to 2.5% (dry weight basis). Cement was tested at addition rates of 1% to 4%. Lime was tested at an 8% addition rate. Water addition rates ranged from 4% dry of optimum to 4% wet of optimum. Engineering properties …

Scale Model Shake Table Testing Of Shallow Embedded Foundations In Soft Clay, Steven Kuo

Master's Theses

This research involves shake table testing of 1g scale models that mimic the coupled seismic response of a structure on a shallow mat foundation and foundation soil (known as soil-foundation-structural-interaction or SFSI). In previous research, SFSI effects have been quantified through analytical models, numerical analyses, and limited field data. This research works towards increasing the amount of empirical data through scale model shake table testing. A suite of earthquake time histories is considered in evaluating a nominal 10^th scale soil-structure model using a flexible wall barrel on a 1-D shake table. San Francisco Young Bay Mud (YBM) is used …

Touchspice Vs. Reactive-Spice: A Human-Computer Interaction Perspective, Joshua Martin O'Hara

Master's Theses

Traditional SPICE simulation tools and applications of circuit theory lack real-time interaction and feedback. The goal of this thesis was to create an interactive physical environment to allow the manipulation and simulation of discrete electrical components in near-real-time while optimizing and streamlining the human-computer interaction (HCI) elements to make the user experience as positive and transparent as possible. This type of HCI and near-real-time simulation feedback would allow for the instant realization of how the parameters of each discrete component or hardware module affect the overall simulation and response of the circuit.

The scope of this thesis is to research, …

Phase-Resolved Characterization Of Conical Turbulent Premixed Flames: An Investigation Of Forced Blowoff Dynamics, Sayan Biswas

Master's Theses

Flame dynamics of a bluff body stabilized turbulent premixed flame as it approaches lean blowoff is of interest for practical applications. It is also important to understand the flame behavior under harmonic flow perturbations as it may occur due to acoustically unstable operation of compact combustors. In this study, a harmonically excited conical flame was studied to determine its behavior under strong burning and near blowoff conditions. Chemiluminescence imaging was employed using a Photron high speed camera to characterize the phase resolved flame characteristics for a range of excitation frequencies from 50 to 400 Hz in confined and unconfined geometries. …

Tissue Engineering A Blood Vessel Mimic While Monitoring Contamination Through Sterility Assurance Testing, Navid Djassemi

Master's Theses

Tissue Engineering A Blood Vessel Mimic While Monitoring Contamination Through Sterility Assurance Testing

Navid Djassemi

Tissue engineering blood vessel mimics has been proposed as a method to analyze the endothelial cell response to intravascular devices that are used in today’s clinical settings for the treatment of cardiovascular disease. Thus, the development of in vitro blood vessel mimics (BVMs) in Cal Poly’s Tissue Engineering Lab has introduced the possibility of assessing the characteristics of cellular response to past, present, and future intravascular devices that aim at treating coronary artery disease.

This thesis aimed at improving the methods and procedures utilized in …

Hot-Wire Anemometer For The Boundary Layer Data System, William D. Neumeister

Master's Theses

Hot-wire anemometry has been routinely employed for laboratory measurements of turbulence for decades. This thesis presents a hot-wire anemometer suitable for use with the Boundary Layer Data System (BLDS). BLDS provides a unique platform for in- flight measurements because of its small, self-contained, robust design and flexible architecture. Addition of a hot-wire anemometer would provide BLDS with a sensor that could directly measure flow velocity fluctuations caused by turbulence. Hot-wires are commonly operated in constant-temperature mode for high frequency response, but require a carefully tuned bridge. The constant-voltage anemometer (CVA) uses a simple op-amp circuit to improve frequency response over …

Development Of In Vitro Tissue Engineered Blood Vessel Mimics In Complex Geometries For Coronary Stent Testing, Robert Dalton Chavez

Master's Theses

Coronary heart disease is the leading cause of death in the United States and occurs when plaque occludes coronary arteries. Coronary stents, which may be used to treat coronary occlusions, are small metal tubes that are implanted in coronary arteries to restore blood flow. After stent implantation, endothelial cells grow over the stent so that blood contacts the endothelial cells instead of the stent surface; this event is known as re-endothelialization. Re-endothelialization prevents blood from clotting on the stent surface and is a good predictor of stent success. Blood vessel mimics (BVMs) are in vitro tissue engineered models of human …

Characterization Of Tight Junction Formation In An In-Vitro Model Of The Blood-Brain Barrier, Michael Robert Machado

Master's Theses

Active and passive transport of substances between the microcirculation in the brain and the central nervous system is regulated by the Blood-Brain Barrier (BBB). This barrier allows for chronic and acute modulation of the CNS microenvironment, and protects the brain from potentially noxious compounds carried in the circulatory system. In-vitro modeling of the BBB has become the target of much research over the past decade, as there are many unanswered questions regarding modulations in the permeability of this barrier. Additionally, the development of a practical and inexpensive model of the BBB would facilitate a much more efficient drug development process. …

Development And Characterization Of An In-House Custom Bioreactor For The Cultivation Of A Tissue Engineered Blood-Brain Barrier, Amin Hadi Mirzaaghaeian

Master's Theses

The development of treatments for neurological disorders such as Alzheimer’s and Parkinson’s disease begins by understanding what these diseases affect and the consequences of further manifestation. One particular region where these diseases can produce substantial problems is the blood-brain barrier (BBB). The BBB is the selective diffusion barrier between the circulating blood and the brain. The barrier’s main function is to maintain CNS homeostasis and protect the brain from the extracellular environment. The progression of BBB research has advanced to the point where many have modeled the BBB in vitro with aims of further characterizing and testing the barrier. Particularly, …

Adaptive Energy Management Scheme In Real-Time Energy Harvesting Embedded Systems, Shruti Khare

Master's Theses

The main purpose of this thesis was to develop an online adaptive energy management scheme for energy harvesting embedded systems. Two energy prediction schemes were used, namely Exponentially Weighted Moving Average (EWMA) and Adaptive Forward Prediction (AFP), to schedule all the tasks with least deadline miss rate. The AFP scheme has a mean relative error of 6-10% which is much lower than exponentially weighted moving average (EWMA) algorithm with an error of 30%. The large difference in the error percentage between the two prediction algorithms is due to the adaptive nature of AFP as it tracks small changes in input …

Investigation Of Trends And Predictive Effectiveness Of Crash Severity Models, James E. Mooradian

Master's Theses

This thesis describes analysis using ordinal logistic regression to uncover temporal patterns in the severity level (fatal, serious injury, minor injury, slight injury or no injury) for persons involved in highway crashes in Connecticut, focusing on the demographic split between senior travelers (65 years and over) and non-senior travelers. Existing state sources provide data describing the time and weather conditions for each crash and the vehicles and persons involved over the time period from 1995 to 2009 as well as the traffic volumes and the characteristics of the roads on which these crashes occurred. Findings indicate an overall increase in …

Rainfall Organization And Geomorphologic Controls On The Flood Response Of Mild-Slope Basins In The South Atlantic Region Of Us, Yiwen Mei

Master's Theses

This study uses data from the Tar-River Basin in North Carolina to explore how space-time rainfall variability influences the hydrologic response from observational and modeling perspectives. For understanding the basin scale effect, the Tar-River Basin is divided into four cascade sub-basins ranging from 1106 km² up to 5654 km². The study evaluates the catchments’ response to rainfall for a large number of storm events by computing the event runoff coefficient based on streamflow observations and through simulations from a semi-distributed hydrological model. Comparison of observed to simulated hydrographs from the hydrological model shows that distributed rainfall forcing …

Enhanced Hydrocarbon Biodegradation Using Bioaugmentation With Biowish™-Aqua Fog, Michael Robert Lehrer

Master's Theses

This study was done to determine the effectiveness of a commercially available bioaugmentation product, BiOWiSH^TM-Aqua FOG, for remediating petroleum-contaminated sandy soil. Biodegradation enhancement by BiOWiSH^TM-Aqua FOG was evaluated in laboratory microcosms by directly measuring total petroleum hydrocarbon (TPH) and indirectly using respirometry. Attempts were made to enrich hydrocarbon-degrading bacteria in BiOWiSH^TM-Aqua FOG, and the resulting enrichment cultures were screened using respirometry as well. Potential hydrocarbon-degrading bacteria in BiOWiSH^TM-Aqua FOG were isolated. Experiments were performed at bench-scale using microcosm bottles containing sand contaminated with either motor oil or No. 2 diesel fuel. The …

Fabrication And Characterization Of Torsional Micro-Hinge Structures, Mike Madrid Marrujo

Master's Theses

ABSTRACT

Fabrication and Characterization of Torsional Micro-Hinge Structures

Mike Marrujo

There are many electronic devices that operate on the micrometer-scale such as Digital Micro-Mirror Devices (DMD). Micro actuators are a common type of DMD that employ a diaphragm supported by torsional hinges, which deform during actuation and are critical for the devices to have high stability and reliability. The stress developed within the hinge during actuation controls how the actuator will respond to the actuating force. Electrostatically driven micro actuators observe to have a fully recoverable non-linear viscoelastic response. The device consists of a micro-hinge which is suspended by two …

The Effect Of Polarization And Ingan Quantum Well Shape In Multiple Quantum Well Light Emitting Diode Heterostructures, Patrick M. Mcbride

Master's Theses

Previous research in InGaN/GaN light emitting diodes (LEDs) employing semi-classical drift-diffusion models has used reduced polarization constants without much physical explanantion. This paper investigates possible physical explanations for this effective polarization reduction in InGaN LEDs through the use of the simulation software SiLENSe. One major problem of current LED simulations is the assumption of perfectly discrete transitions between the quantum well (QW) and blocking layers when experiments have shown this to not be the case. The In concentration profile within InGaN multiple quantum well (MQW) devices shows much smoother and delayed transitions indicative of indium diffusion and drift during …

Effect Of Oxidation On Weld Strengthof Dissimilar Resistance Weld Interface Between 304 Stainless Steeland Near Equiatomic Austenitic Nitinol Guide Wire, Matthew Rudow

Master's Theses

Abbott Vascular encountered strength and variability issues when attempting to resistively weld 304 Stainless Steel to equiatomic Nitinol. Initial observations suggested that passivation layer (Cr₂O₃, TiO₂) formation affected the weld interface. One hundred 304 Stainless Steel/Nitinol pairs were allowed to oxidize in air at room temperature for allowed periods of time (.1, 1, 3, 5, 7, 12, 16, 24, 168, and 336 hours). Each pair was welded resistively with constant current. A Miyachi/Unitek Advanced Data Analysis Monitor (ADAM) recorded the peak resistance at the instance the weld was made. Resistances were compared to Instron …

Deposition, Characterization, And Fabrication Of A Zinc Oxide Piezoelectric Thin Film Microspeaker Using Dc Reactive Sputtering, Adam Olzick

Master's Theses

A piezoelectric microspeaker device that could be used in a variety of acoustic applications was designed and fabricated using a thin film ZnO layer that was reactively DC sputtered onto a single crystalline n-type silicon substrate. When tested the microspeaker did not produce sound due to complications in the etching process, the thickness of the diaphragms, and clamping effects. Instead, a characterization approach was taken and the structural, optical, electrical, and piezoelectric properties of the ZnO were investigated. Scanning electron microscopy, x-ray diffraction, and atomic force microscopy were utilized to discover the ZnO’s structural properties. Using the XRD and SEM, …

Viscoelastic Anisotropic Finite Element Mixture Model Of Articular Cartilage Using Viscoelastic Collagen Fibers And Validation With Stress Relaxation Data, Matthew Alexander Griebel

Master's Theses

Experimental results show that collagen fibers exhibit stress relaxation under tension and a highly anisotropic distribution. To further develop the earlier model of Stender [1], the collagen constituent was updated to reflect its intrinsic viscoelasticity and anisotropic distribution, and integrated with an existing mixture model with glycosaminoglycans and ground substance matrix. A two-term Prony series expansion of the quasi-linear viscoelastic model was chosen to model the viscoelastic properties of the collagen fibers. Material parameters were determined by using the simplex method to minimize the sum of squared errors between model results and experimental stress relaxation data of tissue in tension. …

The Micro Check-In Framework For The Next Generation Of Location-Based Applications, Shraddha Kacha

Master's Theses

Today's mobile computing platforms provide new, convenient possibilities for location-based commercial activity. In particular, the global positioning system (GPS) provides location data for local advertising and retail activity. In this thesis, we take the next step and introduce the concept of micro check-in. Micro check-in is a simple framework that allows users to match their current location to specific objects or places at a resolution much finer than that allowed by GPS based check-in. We show that micro check-in enables customers to reveal their location at a fine level of granularity. By describing the concepts of points of service, service …

Comparing Anti-Vegf Antibodies And Aptamers On Paper Microfluidic-Based Platforms, Katherine Noel Clayton

Master's Theses

The field of microfluidics is expanding into what is known as paper microfluidics. This uses a paper platform rather than materials (i.e. PDMS, PMMA) that are commonly used in microfluidics research. Current devices require an expensive manufacturing process and external sources to power the device. Such devices are not practical in low resource environments. As a consequence, it is the goal of this Thesis to develop a three-dimensional, multiplexed assay chip using nitrocellulose membranes. This device comprises of multiple layers of nitrocellulose membranes with defined fluidic channels. The multiple layers are bound together using double backed tape, and imbedded between …

Touchspice: Physical-Virtual Circuit Emulator, Kevin Christopher Peters

Master's Theses

This thesis involves the creation of a system of embedded touchscreen devices called touchSPICE to aid in the learning of basic circuits. Traditionally, circuit theory is taught to students in two different methods, lectures and laboratory exercises. Lectures focus on auditory and visual learning and are largely passive learning. Lab experiments allow students to physically interact with the circuits, and learn visually through viewing output waveforms from simulators or on measurement devices. The goal of the touchSPICE project is to develop a physical system for virtual, real-time SPICE simulation that mimics the laboratory experience. In touchSPICE, touchscreen devices act as …

Design Of Experimentation To Systematically Determine The Interaction Between Electrospinning Variables And To Optimize The Fiber Diameter Of Electrospun Poly (D, L-Lactide-Co-Glycolide) Scaffolds For Tissue Engineered Constructs, Yvette S. Castillo

Master's Theses

Cardiac disease causes approximately a third of the deaths in the United States. Furthermore, most of these deaths are due to a condition termed atherosclerosis, which is a buildup of plaque in the coronary arteries, leading to occlusion of normal blood flow to the cardiac muscle. Among the methods to treat the condition, stents are devices that are used to restore normal blood flow in the atherosclerotic arteries. Before advancement can be made to these devices and changes can be tested in live models, a reliable testing method that mimics the environment of the native blood vessel is needed. Dr. …

Study Of Statistical And Computational Intelligence Methods Of Detecting Temporal Signature Of Forest Fire Heat Plume From Single-Band Ground-Based Infrared Video, Daniel G. Kohler

Master's Theses

This thesis will analyze video from land-based, cooled mid-wave infrared cameras to identify temporal features indicative of a heat plume from a forest fire. Desirable features and methods will show an ability to distinguish between heat plume movement and other movements, such as foliage, vehicles, humans, and birds in flight. Features will be constructed primarily using combinations of statistics and principal component analysis (PCA) with intent to detect key characteristics of fire and heat plume: persistence and growth. Several classification systems will combine and filter the features in an attempt to classify pixels as either heat or non-heat. The classification …

Characterization Of Raw Milk Fouling On Plate-Type Heat Exchangers Using Different Alloys And Cow Phenotypes, Stephen Ernest Nelson

Master's Theses

ABSTRACT

Characterization Of Raw Milk Fouling On Plate-Type Heat Exchangers Using Different Alloys And Cow PhenotypeS

Stephen Ernest Nelson

Milk and other dairy products are widely used in many households today. Milk is a popular beverage that is seen as a healthy alternative to other synthetic beverages such as soda pop and other sugar based drinks. It became law that milk, and milk products are pasteurized before its release to the general public (FDA 2003). Pasteurization is a thermal process where the intent is to lower the concentration of microorganisms in the milk to render it safe to drink with …

3d Electromagnetic Simulation Tool Exposure For Undergraduate Electrical Engineers: Incorporation Into An Analog Filters Course, Bobby B. Pheng

Master's Theses

With the growth of wireless communications, comes the need for engineers knowledgeable in 3D electromagnetic (EM) simulation of high-frequency circuits. To give electrical engineering students a better understanding of the behavior of electromagnetic fields, experiments including the use of 3D EM simulation software were proposed. Most students get lost in differential equations, curls, and divergences; this thesis aims to remedy that by exposing them to 3D EM simulation, which may motivate them toward further study in electromagnetics. Also, experience using EMPro is very beneficial for future RF/microwave/antenna engineers, as use of 3D EM simulation is becoming a requirement for this …