Engineering Commons^™

Characterization Of Pressure-Driven And Electro-Kinetically Driven Flow In A Micro-Fluidic Chip Using Particle Imaging Velocimetry, Alexis Weckel

Master's Theses

The flow profiles of pressure-driven and electro-kinetic driven flows were compared for a microfluidic chip. It was found that the pressure-driven flow had a parabolic profile while the electro-kinetic flow had a plug shaped flow profile. The measured velocities were similar to those determined by the Poiseuille flow model and the Helmholtz-Smoltchowski equation. Flow uniformity is very important for control in microfluidic mixers. Parabolic flow profiles lead to inconsistent reactions while the more uniform plug shape flow allow for a more steady reaction across the channel. Previous work had been performed to measure the flow of a solution of fluorescent …

A Risk Analysis Model For The Maintenance And Rehabilitation Of Pipes In A Water Distribution System: A Statistical Approach, Hernan Cortez

Master's Theses

ABSTRACT

The network of pipes in potable water distribution systems (WDS) are comprised of thousands of pipes made of various materials including PVC, concrete, cast iron, and steel, among several others. The pipes are subjected to internal and external conditions that lead to their failure. Stress conditions include, but are not limited to internal pressures, traffic loading, and corrosion. The deterioration of a pipe decreases its mechanical strength which results in an increase of its probability of failure. Failures lead to loss of service which translates to loss of money due to the cost of repairs and buildup of traffic …

Analysis Of Particles Thorough The Aortic Arch During Transcatheter Aortic Valve Replacement, Andrew Joseph Janicki

Master's Theses

Ischemia caused by particles becoming dislodged during transcatheter aortic valve replacement (TAVR) is a possible complication of TAVR. The particles that become dislodged can travel out of the aortic valve, into the aortic arch, and then into either the brachiocephalic artery, the left common carotid artery, the left subclavian artery or continue into the descending aorta. If the particles continue into the descending aorta it poses no risk of causing ischemia however if it travels into the other arteries then it increases the possibility of the particle causing an ischemic event. The goal of this study is to determine what …

A Finite Element Analysis Of Tibial Stem Geometry For Total Knee Replacements, Aaron Isidro Bautista

Master's Theses

The purpose of this study was to investigate the influence of tibial stem geometry on stress shielding of the tibia for patients with a total knee replacement. Finite element analysis was used to study different tibial stem geometry types, as well as a vast array of different geometric sizes. Both a peg and stem type geometry were analyzed and compared in order to determine what type geometry causes the least amount of stress shielding. A static loading condition with a dynamic loading factor of three was used for the system and the stress responses were analyzed at regions of interest …

Mathematical Model Validation Of A Center Of Gravity Measuring Platform Using Experimental Tests And Fea, Michael Lashore

Master's Theses

This thesis sets out to derive an analytical model for a center of gravity (CG) measuring platform and examines its validity through experimental testing and Finite Element Modeling. The method uses a two-stage platform tilting process to first locate the planar CG coordinates and then find the third CG coordinate normal to the platform. An uncertainty model of the measuring platform was also developed, both CG and uncertainty models were implemented in the form of a MATLAB code. A load cell sizing task was also added to the code to assist the Integration Engineers at Jet Propulsion Laboratory in selecting …

A Customer Value Assessment Process (Cvap) For Ballistic Missile Defense, Alex Hernandez

Master's Theses

A systematic customer value assessment process (CVAP) was developed to give system engineering teams the capability to qualitatively and quantitatively assess customer values. It also provides processes and techniques used to create and identify alternatives, evaluate alternatives in terms of effectiveness, cost, and risk. The ultimate goal is to provide customers (or decision makers) with objective and traceable procurement recommendations. The creation of CVAP was driven by an industry need to provide ballistic missile defense (BMD) customers with a value proposition of contractors’ BMD systems. The information that outputs from CVAP can be used to guide BMD contractors in formulating …

Clarification Of Recreational Pool Water Using Biological Additives Produced By Biowish(Tm), Reese Nathaniel Wilson

Master's Theses

Effects of commercially available bacterial products were investigated on two common recreational pool contaminants: sunscreen and cyanuric acid (CYA). Microbial products developed by BiOWiSH Technologies, Inc. were tested for enhancing mechanical filtration and water clarification in bench-scale bioreactors, with conditions mimicking those of recreational pool water. Bacterial consortia included proprietary mixes of Bacillus, Lactobacillus and Pseudomonas, and other genera of bacteria. BiOWiSH products are either fermented on a solid substrate consisting of rice bran and soy meal, or they are mixed with a soluble diluent. Twenty-nine BiOWiSH products were tested throughout forty experiments.

Experiments were carried out to determine both …

Rest Api To Access And Manage Geospatial Pipeline Integrity Data, Alexandra Michelle Francis

Master's Theses

Today’s economy and infrastructure is dependent on raw natural resources, like crude oil and natural gases, that are optimally transported through a net- work of hundreds of thousands of miles of pipelines throughout America[28]. A damaged pipe can negatively a↵ect thousands of homes and businesses so it is vital that they are monitored and quickly repaired[1]. Ideally, pipeline operators are able to detect damages before they occur, but ensuring the in- tegrity of the vast amount of pipes is unrealistic and would take an impractical amount of time and manpower[1].

Natural disasters, like earthquakes, as well as construction are just …

Inlet Shape Considerations For Split-Wing Electric Distributed Propulsion, Kurt Vonderhaar Papathakis

Master's Theses

This thesis aims to uncover preliminary design relationships for an inlet of a split-wing electric distributed propulsion regional airliner. Several aspects of the inlet design were investigated, including: the overall thickness of the airfoil section with respect to the chord, inlet throat area, and lip radius. These parameters were investigated using several angles of attack and mass flow rates through the fan. Computational fluid dynamics, with a 2^nd Order turbulence model was used and validated against World War II era data from NACA, as those studies were the most pertinent wind tunnel data available. Additionally, other works by Boeing, …

Sweep Stability Characterization Of A Vernier-Tuned Distributed Bragg Reflector (Vt-Dbr) All-Semiconductor Tunable Swept Laser System At 1550 Nm For Sensing Applications, Roric Christian Martens Biersach

Master's Theses

The short-term jitter and longer-term wander of the frequency sweep profile of a Vernier-Tuned Distributed Bragg Reflector (VT-DBR) laser at 1550 nm used in optical coherence tomography (OCT) and other sensing applications is characterized in this work. The VT-DBR has demonstrated success in source-swept OCT (SSOCT), performing both intensity and phase-sensitive OCT.

The purpose of this paper is to investigate one of the unique aspects of the VT-DBR laser that makes it successful in OCT: the stability of the linear optical frequency sweep. A highly stable linear optical frequency sweep implies benefits for further fiber sensing applications including fiber Bragg …

Structural Micrometeoroid And Radiation Shielding For Interplanetary Spacecraft, Jared Allen Ruekberg

Master's Theses

This paper focused on two significant space forces that can affect the success of a spacecraft: the radiation and micrometeoroid environments. Both are looked at in the context of the region of space between Earth and Mars. The goal was create reference environments, to provide context to results of environmental modeling, and to provide recommendations to assist in early design decisions of interplanetary spacecraft. The radiation section of this report used NASA's OLTARIS program to generate data for analysis. The area of focus was on the radiation effects for crewed missions, therefore effective dose equivalent was the metric used to …

Toward The Systematization Of Active Authentication Research, Daniel Fleming Gerrity

Master's Theses

Authentication is the vital link between your real self and your digital self. As our digital selves become ever more powerful, the price of failing authentication grows. The most common authentication protocols are static data and employed only once at login. This allows for authentication to be spoofed just once to gain access to an entire user session. Behaviometric protocols continuously consume a user’s behavior as a token of authentication and can be applied throughout a session, thereby eliminating a fixed token to spoof. Research into these protocols as viable forms of authentication is relatively recent and is being conducted …

Locating Optimal Water Quality Monitoring Locations Using Demand Coverage Index Method, Jeffrey Scott Brake

Master's Theses

Water quality regulations are always expanding especially in the field of water quality monitoring; however, threats to our water distribution systems still remain. Components of water distribution systems are susceptible to intentional and accidental contamination; therefore, they represent highly vulnerable aspects of our vital infrastructure.

An analysis was performed on a city in California with a population of 30,000 to 40,000 residents. The analysis is performed to determine the optimal locations of monitoring stations throughout the water distribution system. The method presented by Liu and colleagues (Liu et al, 2012) selects the optimal monitoring locations for the virtual California city …

Analysis Of Mos Current Mode Logic (Mcml) And Implementation Of Mcml Standard Cell Library For Low-Noise Digital Circuit Design, Marcus Edwin Allan Heim

Master's Theses

MOS current mode logic (MCML) offers low noise digital circuits that reduce noise that can cripple analog components in mixed-signal integrated circuits, when compared to CMOS digital circuits. An MCML standard cell library was developed for the Cadence Virtuoso Integrated Circuit (IC) design software that gives IC designers the ability to design complex, low noise digital circuits for use in mixed-signal and noise sensitive systems at a high level of abstraction, allowing them to get superior products to market faster than competitors. The MCML standard cell library developed and presented here allows for fast development of mixed signal circuits by …

The Development Of A High-Performance Distributed Battery Management System For Large Lithium Ion Packs, Christopher B. Grasberger

Master's Theses

A high performance battery management system (BMS) for large capacity cells was designed, built, and tested in a cycle of three revisions. The BMS was designed for use in applications where the battery pack configuration is unknown: parallel, series, or any combination. Each of the cells is equipped with its own battery management system to allow a peer-to-peer mesh network to monitor the safety of the cell. The BMS attached to each cell also is equipped with a 25A DC/DC converter to perform active balancing between cells in a string. This converter can transfer charge to (or from) a cell …

Analysis Of A Carbon Fiber Reinforced Polymer Impact Attenuator For A Formula Sae Vehicle Using Finite Element Analysis, John T. Rappolt

Master's Theses

The Hashin failure criteria and damage evolution model for laminated fiber reinforced polymers are explored. A series of tensile coupon finite element analyses are run to characterize the variables in the physical model as well as modeling techniques for using an explicit dynamic solver for a quasi-static problem. An attempt to validate the model on an axial tube crush is presented. It was found that fiber buckling was not occurring at the impactor-tube interface. Results and speculation as to why the failure initiation is incorrect are discussed. Lessons learned from the tube crush are applied successfully to the quasi-static Formula …

Increasing Isentropic Efficiency With Hydrostatic Head And Venturi Ejection In A Rankine Power Cycle, Nathan Daniel Ruiz

Master's Theses

This thesis describes the modifications made to the Cal Poly Thermal Science Laboratory’s steam turbine experiment. While the use of superheating or reheating is commonly used to increase efficiency in a Rankine cycle the methods prove unfeasible in a small scale project. For this reason, a mathematical model and proof of concept design using hydrostatic head generated by elevation and venturi ejection for use by the condenser is developed along with the equations needed to predict the changes to the system. These equations were used to create software to predict efficiency as well as lay down the foundation for future …

Measuring The Influence That Components Have On Pedestrian Route Choice In Activated Alleys, Samuel Hirsher Gross

Master's Theses

This paper explores how cities have integrated formal planning into improving public space. Through a review of literature on the topic, this the paper identifies the potential design has to renovate narrow streets and alleys, within the public right of way. By preforming an assessment of plans and programs, this paper identifies the common themes or components that have been used by planners, architects, and engineers to improve the urban environment for pedestrians. Based on this information, a pilot study was created to measure the influence the most common components have on pedestrian route choice. The results are then compared …

Adaptive Automotive Lighting Systems, Marc W. Haeberlin

Master's Theses

Over the past few years, the use of LEDs within the automotive and avionic industries has increased due to their high efficiency, durability and wide range of light brightness. As the use of LEDs within these industries grows, a need for reliable, high performance drivers becomes more relevant. Companies are implementing LEDs for applications involving adaptive lighting or simple dimming features. This thesis shows implementation of various non-isolated analog converters integrated with digital dimmers to achieve these adaptive lighting systems. Adaptive lighting systems involve reading an input from an external source (brake pedal or steering wheel) and changing the brightness …

The Creation, Analysis, And Verification Of A Comprehensive Model Of A Micro Ion Thruster, Maxwell J. Bodnar

Master's Theses

A computational model of the micro-ion thruster MiXI has been developed, analyzed, and partially verified. This model includes submodels that govern the physical, magnetic, electrostatic, plasma physics, and power deposition of the thruster. Over the past few years, theses have been conducted with the goal of running tests and analyzing the results; this model is used to understand how the thruster components interact so as to make predictions about, and allow for optimization of, the thruster operation. Testing is then performed on the thruster and the results are compared to the output of the code. The magnetic structure of the …

Nutrient Transformations In Algae Raceway Ponds Fed Municipal Wastewater, Carter Michael Reiff

Master's Theses

While treating domestic wastewater, algae can be grown and harvested for biofuel production. Water is a vital resource and it is imperative to conserve and reuse as much as possible. Several pilot and lab scale experiments were conducted to further research into a full scale wastewater treatment and biofuel production facility. This thesis will include these topics: nitrogen and phosphorus concentrations of clarified wastewater pond feed, nitrogen and phosphorus transformations by algae, and the potential of algae cell disruption technologies to increase nutrient solubilization.

The pilot scale experiments were conducted using nine 33 m², 0.3 m deep multi-culture …

Validation Of A Cfd Approach For Gas Turbine Internal Cooling Passage Heat Transfer Prediction, Daniel G. Wilde

Master's Theses

This report describes the development and application of a validated Computational Fluid Dynamics (CFD) modelling approach for internal cooling passages in rotating turbomachinery. A CFD Modelling approach and accompanying assumptions are tuned and validated against academically available experimental results for various serpentine passages. Criteria of the CFD modelling approach selected for investigation into advanced internal cooling flows include accuracy, robustness, industry familiarity, and computational cost.

Experimental data from NASA HOST (HOt Section Technology), Texas A&M, and University of Manchester tests are compared to RANS CFD results generated using Fluent v14.5 in order to benchmark a CFD modelling approach.

Capability of …

Universal Programmable Battery Charger With Optional Battery Management System, Michael Duke Desando

Master's Theses

This report demonstrates improvements made in battery charging and battery management technology through the design of a universal programmable battery charger with optional battery management system attachment. This charger offers improvements in charge efficiency and unique battery charging algorithms to charge a variety of battery chemistries with variety of power requirements. Improvements in efficiency result from a synchronous Buck Controller topology as compared to previous universal chargers that use asynchronous Buck-Boost Converter topologies. This battery charger also surpasses current universal battery chargers by offering different charge modes for different battery chemistries. Charge modes provide the user an option between extending …

Evaluation Of Design Tools For The Micro-Ram Air Turbine, Victor Fidel Villa

Master's Theses

The development and evaluation of the design of a Micro-Ram Air Turbine (µRAT), a device being developed to provide power for an autonomous boundary layer measurement system, has been undertaken. The design tools consist of a rotor model and a generator model. The primary focus was on developing and evaluating the generator model for the prediction of generator brake power and output electrical power with and without rectification as a function of shaft speed and electrical load, with only basic manufacturer specifications given as inputs. A series of motored generator evaluation test were conducted at speeds ranging from 9,000 to …

Aerodynamic Design And Structural Analysis Procedure For Small Horizontal-Axis Wind Turbine Rotor Blade, Dylan R. Perry

Master's Theses

This project accomplished two correlated goals of designing a new rotor blade to be used with the Cal Poly Wind Power Research Center, as well as defining the methodology required for the aerodynamic analysis of an optimized blade, the procedure required for generation of an accurate CAD model for the new blade geometry, and structural integrity verification procedure for the new blade via finite element analysis under several operating scenarios. The new rotor blades were designed to perform at peak efficiency at a much lower wind speed than the current CPWPRC rotor blades and incorporated a FEA verification process which …

Ecg Classification With An Adaptive Neuro-Fuzzy Inference System, Brad Thomas Funsten

Master's Theses

Heart signals allow for a comprehensive analysis of the heart. Electrocardiography (ECG or EKG) uses electrodes to measure the electrical activity of the heart. Extracting ECG signals is a non-invasive process that opens the door to new possibilities for the application of advanced signal processing and data analysis techniques in the diagnosis of heart diseases. With the help of today’s large database of ECG signals, a computationally intelligent system can learn and take the place of a cardiologist. Detection of various abnormalities in the patient’s heart to identify various heart diseases can be made through an Adaptive Neuro-Fuzzy Inference System …

Design And Fabrication Techniques Of Devices For Embedded Power Active Contact Lens, Errol Heradio Leon

Master's Theses

This thesis designed and fabricated various devices that were interfaced to an IC for an active contact lens that notifies the user of an event by detection of an external wireless signal. The contact lens consisted of an embedded antenna providing communication with a 2.4GHz system, as well as inductive charging at an operating frequency of 13.56 MHz. The lens utilized a CBC005 5µAh thin film battery by Cymbet and a manufactured graphene super capacitor as a power source. The custom integrated circuit (IC) was designed using the On Semiconductor CMOS C5 0.6 µm process to manage …

Hybrid Rocket Motor Scaling Process, Joseph B. R. Vanherweg

Master's Theses

Hybrid rocket propulsion technology shows promise for the next generation of sounding rockets and small launch vehicles. This paper seeks to provide details on the process of developing hybrid propulsion systems to the academic and amateur rocket communities to assist in future research and development. Scaling hybrid rocket motors for use in sounding rockets has been a challenge due to the inadequacies in traditional boundary layer analysis. Similarity scaling is an amendment to traditional boundary layer analysis which is helpful in removing some of the past scaling challenges. Maintaining geometric similarity, oxidizer and fuel similarity and mass flow rate to …

Telepresence: Design, Implementation And Study Of An Hmd-Controlled Avatar With A Mechatronic Approach, Darren Michael Chan

Master's Theses

Telepresence describes technologies that allow users to remotely experience the sensation of being present at an event without being physically present. An avatar exists to represent the user whilst in a remote location and is tasked to collect stimuli from its immediate surroundings to be delivered to the user for consumption. With the advent of recent developments in Virtual Reality technology, viz., head-mounted displays (HMDs), new possibilities have been enabled in the field of Telepresence. The main focus of this thesis is to develop a solution for visual Telepresence, where an HMD is used to control the direction of a …

Using Archived Transit Data To Analyze The Effect Of Rainfall On Transit Performance Measures At The Route Level, Nicholas F. Bleich

Master's Theses

This study investigates the effect of rainfall on transit performance measures at the route level in the Puget Sound region of Washington State. Transit agencies are required to report certain performance metrics to the Federal Transit Administration (FTA), but performance measures can also be used to evaluate service and provide customers with information regarding the transit system. Using a three-year sample of archived automatic vehicle location (AVL) and hydrologic data the relationships between ridership, travel time, delay, and rainfall were investigated. The analysis of daily ridership and rainfall resulted in no statistically significant results, however, the results are supported by …