Engineering Commons^™

Si-Based Germanium-Tin (Gesn) Emitters For Short-Wave Infrared Optoelectronics, Seyed Amir Ghetmiri

Graduate Theses and Dissertations

Conventional integrated electronics have reached a physical limit, and their efficiency has been influenced by the generated heat in the high-density electronic packages. Integrated photonic circuits based on the highly developed Si complementary-metal-oxide-semiconductor (CMOS) infrastructure was proposed as a viable solution; however, Si-based emitters are the most challenging component for the monolithic integrated photonic circuits. The indirect bandgap of silicon and germanium is a bottleneck for the further development of photonic and optoelectronic integrated circuits.

The Ge1-xSnx alloy, a group IV material system compatible with Si CMOS technology, was suggested as a desirable material that theoretically exhibits a direct bandgap …

A Bifunctional Nanocomposites Based Electrochemical Biosensor For In-Field Detection Of Pathogenic Bacteria In Food, Meng Xu

Graduate Theses and Dissertations

This research focused on the application of electrochemical biosensors for the rapid detection of pathogenic bacteria, Escherichia coli O157:H7 and Salmonella Typhimurium, in foods. The possible presence of pathogenic bacteria in foods has always been a great threat to the wellbeing of people and the revenue of food companies. Therefore, the demand for rapid and sensitive methods to detect foodborne pathogens is growing. In this research, an impedimetric immunosensor was first developed for the rapid detection of E. coli O157:H7 and S. Typhimurium in foods. It was based on the techniques of immunomagnetic separation, enzyme labelling, and electrochemical impedance spectroscopy …

Scaffold And Tissue Based Therapies To Improve Skeletal Muscle Regeneration After Volumetric Muscle Loss, Benjamin Kasukonis

Graduate Theses and Dissertations

Volumetric muscle loss (VML) is an injury to skeletal muscle characterized by a loss of more than 20% of a muscles volume. The combination of the bulk loss of tissue, transection and separation of myofibers proximal and distal to the injury, loss of innervation and blood supply, and the depletion of muscle progenitor cells results in permanent fibrosis and functional deficits due to loss of contractile tissue. Scaffolds, cells, and engineered constructs have been explored as potential therapeutic interventions to induce myogenesis at the site of a VML injury in animal models, in addition to limited clinical trials. This dissertation …

Just In Time Assembly (Jita) - A Run Time Interpretation Approach For Achieving Productivity Of Creating Custom Accelerators In Fpgas, Sen Ma

Graduate Theses and Dissertations

The reconfigurable computing community has yet to be successful in allowing programmers to access FPGAs through traditional software development flows. Existing barriers that prevent programmers from using FPGAs include: 1) knowledge of hardware programming models, 2) the need to work within the vendor specific CAD tools and hardware synthesis. This thesis presents a series of published papers that explore different aspects of a new approach being developed to remove the barriers and enable programmers to compile accelerators on next generation reconfigurable manycore architectures. The approach is entitled Just In Time Assembly (JITA) of hardware accelerators. The approach has been defined …

Measuring Nonlinear Properties Of Graphene Thin Films Using Z-Scan Technique, Thekrayat Hassan Al Abdulaal

Graduate Theses and Dissertations

The nonlinear studies of two-dimensional (2D) nanomaterials, specifically graphene, are very significant since graphene is finding its usefulness in handling the enormous heat in nanoscale high-density power electronics. Graphene has emerged to be a promising nanomaterial as an excellent heat spreader due to its high thermal conductivity. However, the experimental nonlinear study of graphene materials and their application in developing future optoelectronic devices demands for more developed research.

The research objective is first to build a precise, and sensitive technique to investigate and understand the thermal nonlinear properties, including nonlinear refractive index (n2), nonlinear absorption coefficient (β), and thermo-optic coefficient …

Design, Fabrication And Measurement Of A Plasmonic Enhanced Terahertz Photoconductive Antenna, Nathan Matthias Burford

Graduate Theses and Dissertations

Generation of broadband terahertz (THz) pulses from ultrafast photoconductive antennas (PCAs) is an attractive method for THz spectroscopy and imaging. This provides a wide frequency bandwidth (0.1-4 THz) as well as the straightforward recovery of both the magnitude and phase of the transmitted and/or reflected signals. The achieved output THz power is low, approximately a few microwatts. This is due to the poor conversion of the femtosecond laser used as the optical pump to useable current inside the antenna semiconducting material. The majority of THz power comes from the photocarriers generated within ~ 100 nm distance from the antenna electrodes. …

Optimal Sensing And Transmission In Energy Harvesting Sensor Networks, Xianwen Wu

Graduate Theses and Dissertations

Sensor networks equipped with energy harvesting (EH) devices have attracted great attentions recently. Compared with conventional sensor networks powered by batteries, the energy harvesting abilities of the sensor nodes make sustainable and environment-friendly sensor networks possible. However, the random, scarce and non-uniform energy supply features also necessitate a completely different approach to energy management.

A typical EH wireless sensor node consists of an EH module that converts ambient energy to electrical energy, which is stored in a rechargeable battery, and will be used to power the sensing and transmission operations of the sensor. Therefore, both sensing and transmission are subject …

Interactive Physics And Characteristics Of Photons And Photoelectrons In Hyperbranched Zinc Oxide Nanostructures, Garrett Edward Torix

Graduate Theses and Dissertations

As is commonly known, the world is full of technological wonders, where a multitude of electronic devices and instruments continuously help push the boundaries of scientific knowledge and discovery. These new devices and instruments of science must be utilized at peak efficiency in order to benefit humanity with the most advanced scientific knowledge. In order to attain this level of efficiency, the materials which make up these electronics, or possibly more important, the fundamental characteristics of these materials, must be fully understood. The following research attempted to uncover the properties and characteristics of a selected family of materials. Herein, zinc …

Synthesis, Characterization, And Fabrication Of All Inorganic Quantum Dot Leds, Haider Baqer Salman

Graduate Theses and Dissertations

Quantum Dot LEDs with all inorganic materials are investigated in this thesis. The research was motivated by the potential disruptive technology of core shell quantum dots in lighting and display applications. These devices consisted of three main layers: hole transport layer (HTL), electron transport layer (ETL), and emissive layer where the emission of photons occurs. The latter part was formed of CdSe / ZnS core-shell quantum dots, which were synthesized following hot injection method. The ETL and the HTL were formed of zinc oxide nanocrystals and nickel oxide, respectively. Motivated by the low cost synthesis and deposition, NiO and ZnO …

Growth Of Gesn And Gepb Alloy Films Using Thermal Evaporator, Hakimah Alahmed

Graduate Theses and Dissertations

Silicon is the most important semiconductor material used in microelectronic devices. As the number of transistors keep doubling every 24 months (Moore’s law), transistors continue scaling down in size, electrical interconnect is reaching its limits to keep up with the scaling down rate in integrated circuits. These limitations are related to interconnect density and power consumption. Hence, replacing electrical interconnect with optical interconnect on the chip or between chips has the ability to overcome these limitations. However, silicon has poor light emitting efficiency, and other substitutes such as III-V materials are not suitable due to high cost, lattice mismatch, and …

Coarse-Grained Simulations Of The Self-Assembly Of Dna-Linked Gold Nanoparticle Building Blocks, Charles Wrightsman Armistead

Graduate Theses and Dissertations

The self-assembly of nanoparticles (NPs) of varying shape, size, and composition for the purpose of constructing useful nanoassemblies with tailored properties remains challenging. Although progress has been made to design anisotropic building blocks that exhibit the required control for the precise placement of various NPs within a defined arrangement, there still exists obstacles in the technology to maximize the programmability in the self-assembly of NP building blocks. Currently, the self-assembly of nanostructures involves much experimental trial and error. Computational modeling is a possible approach that could be utilized to facilitate the purposeful design of the self-assembly of NP building blocks …

Membrane Chromatography For Bioseparations: Ligand Design And Optimization, Zizhao Liu

Graduate Theses and Dissertations

Membrane chromatography, or membrane adsorber, represents an attractive alternative to conventional packed bed chromatography used in downstream processing. Membrane chromatography has many advantages, including high productivity, low buffer consumption and ease to scale up. This doctoral dissertation focuses on developing novel polymeric ligands for protein separations using membrane chromatography. Atom transfer radical polymerization (ATRP), known as a controlled radical polymerization technique, has been used to control the architecture of grafted polymeric ligands. The center theme of this dissertation is to develop new polymeric ligands and investigate how the polymer’s property (e.g. flexibility, hydrophobicity) and architecture (e.g. chain density, chain length) …

Leveling The Playing Field: Teacher Perception Of Integrated Stem, Engineering, And Engineering Practices, Bridgette Fincher

Graduate Theses and Dissertations

The purpose of this study was to describe the perceptions and approaches of 14 third-through-fifth grade Arkansan elementary teachers towards integrative engineering and engineering practices during 80 hours of integrated STEM professional development training in the summer and fall of 2014. This training was known as Project Flight. The purpose of the professional development was to learn integrated STEM content related to aviation and to write grade level curriculum units using Wiggins and McTighe’s Understanding by Design curriculum framework. The current study builds upon on the original research.

Using a mixed method exploratory, embedded QUAL[quan] case study design and a …

Role Of The Inner Shell Architecture On The Various Blinking States And Decay Dynamics Of Core-Shell And Core-Multishell Quantum Dots, Pooja Bajwa

Graduate Theses and Dissertations

Colloidal semiconductor nanocrystals (quantum dots, QDs) have received much attention in recent years due to their uniquely size-tunable properties leading to a number of promising applications. Some of their most popular applications include their use as fluorescent probes in biology, as electro-optical components and in photovoltaic devices. CdSe-based QDs are particularly important because of their ease of synthesis, high photoluminescence quantum yields (PL QYs) across the whole visible spectrum and their photostabilty. Shelling of core QDs is usually carried out to improve their optical properties, minimize outer environmental effects on their properties, and avoid toxic element exposure to the environment. …

Fabrication Of Infrared Photodetectors Utilizing Lead Selenide Nanocrystals, Justin Anthony Hill

Graduate Theses and Dissertations

Colloidal lead selenide and lead selenide / lead sulfide core/shell nanocrystals were grown using a wet chemical synthesis procedure. Absorbance and photoluminescence measurements were made to verify the quality of the produced nanocrystals. Absorbance spectra were measured at room temperature, while photoluminescence spectra were measured at 77 K. Organic ligands were exchanged for shorter ligands in order to increase the conductivity of the nanocrystals. Absorption and PL spectra for both core and core/shell nanocrystals were compared. Interdigital photodetector devices with varying channel widths were fabricated by depositing gold onto a glass substrate. Lead selenide nanocrystals were deposited onto these metallic …

Removal Of Carboxylic Acids And Water From Pyrolysis Oil, George Alexander Marshall

Graduate Theses and Dissertations

Over 70% of the world’s energy consumption is provided by fossil fuels and with those reserves depleting at a fast rate, alternative energy sources or methods are needed to support the world’s energy needs. This research was done in an attempt to make it more economically feasible to produce fuel products, such as bio-diesel, from the upgrading of bio-oil obtained from the pyrolysis of biomass waste material such as sawdust. The high water and oxygenated compound content of bio-oil make it undesirable for fuel use; however, two methods involving surface modified commercial membranes were utilized in hopes of overcoming these …

A Portable And Automatic Biosensing Instrument For Detection Of Foodborne Pathogenic Bacteria In Food Samples, Zhuo Zhao

Graduate Theses and Dissertations

Foodborne diseases are a growing public health problem. In recent years, many rapid detection methods have been reported, but most of them are still in lab research and not practical for use in the field. In this study, a portable and automatic biosensing instrument was designed and constructed for separation and detection of target pathogens in food samples using nanobead-based magnetic separation and quantum dots (QDs)-labeled fluorescence measurement. The instrument consisted of a laptop with LabVIEW software, a data acquisition card (DAQ), a fluorescent detector, micro-pumps, stepper motors, and 3D printed tube holders. First, a sample in a syringe was …

The Effect Of Process Parameters And Surface Condition On Bond Strength Between Additively Manufactured Components And Polymer Substrates, Bharat Bhushan Chivukula

Graduate Theses and Dissertations

Additive patching is a process in which printers with multiple axes deposit molten material onto a pre-defined surface to form a bond. Studying the effect of surface roughness and process parameters selected for printing auxiliary part on the bond helps in improving the strength of the final component. Particularly, the influence of surface roughness, as established by adhesion theory, has not been evaluated in the framework of additive manufacturing (AM). A full factorial design of experiments with five replications was conducted on two levels and three factors, viz., layer thickness, surface roughness, and raster angle to examine the underlying effects …

Eveleth, Minnesota: A Portrait Of My Home Town, Judith I. Luna

Graduate Theses and Dissertations

This 30-minute documentary film provides snapshots of the small northeastern iron mining town of Eveleth, Minnesota, on the Mesabi Iron Range. It uses a two-pronged approach: 1) a first-person return to the town by the filmmaker almost 50 years after graduating from high school to see how the town may have changed, 2) a look at some historical and cultural factors which made the town what it was when the filmmaker was growing up and what continues to animate the town in the face of iron mining’s decline and rebirth. The latter include the immigrant experience and influence as the …

Safety Performance Prediction Of Large-Truck Drivers In The Transportation Industry, Emily Moneka Francis Xavier

Graduate Theses and Dissertations

The trucking industry and truck drivers play a key role in the United States commercial transportation sector. Accidents involving large trucks is one such big event that can cause huge problems to the driver, company, customer and other road users causing property damage and loss of life. The objective of this research is to concentrate on an individual transportation company and use their historical data to build models based on statistical and machine learning methods to predict accidents. The focus is to build models that has high accuracy and correctly predicts an accident. Logistic regression and penalized logistic regression models …

Grouping Techniques To Manage Large-Scale Multi-Item Multi-Echelon Inventory Systems, Anvar Abaydulla

Graduate Theses and Dissertations

Large retail companies operate large-scale systems which may consist of thousands of stores. These retail stores and their suppliers, such as warehouses and manufacturers, form a large-scale multi-item multi-echelon inventory supply network. Operations of this kind of inventory system require a large number of human resources, computing capacity, etc.

In this research, three kinds of grouping techniques are investigated to make the large-scale inventory system “easier” to manage. The first grouping technique is a network based ABC classification method. A new classification criterion is developed so that the inventory network characteristics are included in the classification process, and this criterion …

The Role Of Organic Matter In The Fate And Transport Of Antibiotic Resistance, Metals, And Nutrients In The Karst Of Northwest Arkansas, Victor Lee Roland Ii

Graduate Theses and Dissertations

Organic matter (OM) in the environment acts as a nutrient, but may also act as a transport vector for harmful chemical compounds and bacteria. Acetate is a labile form of OM produced during fermentation in anaerobic lagoons used to store animal fecal-waste from concentrated animal feeding operations (CAFOs). Dry and liquid fertilizers from CAFOs pose a threat to groundwater by introducing excessive amounts of nutrients (e.g. OM, nitrate and ammonia), metals, and antibiotic compounds. In the epikarst of Northern Arkansas in the Buffalo River watershed additional input of labile dissolved organic carbon (DOC) from liquid CAFO waste-fertilizers was hypothesized to …

Asbestos Cement Pipe Condition Assessment And Remaining Service Life Prediction, Abiy Melles Ghirmay

Graduate Theses and Dissertations

This research details a condition assessment of asbestos cement (AC) pipe within in the Bella Vista Village Property Owners Association water distribution system. Bella Vista Village contains appropriately 300 miles of AC pipe with nominal diameters from 6-14 inch. The goal of the research is to determine the current condition of AC pipe within the system and predict future performance of the pipes. AC pipe samples were obtained from 23 locations disturbed across the distribution system with nominal pipe diameters of 6-8 inch. Estimates of current level of degradation were obtained using phenolphthalein staining and hardness measurements of each sample. …

4d Printing Dielectric Elastomer Actuator Based Soft Robots, Jiyu Cai

Graduate Theses and Dissertations

4D printing is an emerging technology that prints 3D structural smart materials that can respond to external stimuli and change shape over time. 4D printing represents a major manufacturing paradigm shift from single-function static structures to dynamic structures with highly integrated functionalities. Direct printing of dynamic structures can provide great benefits (e.g., design freedom, low material cost) to a wide variety of applications, such as sensors and actuators, and robotics. Soft robotics is a new direction of robotics in which hard and rigid components are replaced by soft and flexible materials to mimic mechanisms that works in living creatures, which …

Essays On Optimization And Modeling Methods For Reliability And Reliability Growth, Thomas Paul Talafuse

Graduate Theses and Dissertations

This research proposes novel solution techniques in the realm of reliability and reliability growth. We first consider a redundancy allocation problem to design a system that maximizes the reliability of a complex series-parallel system comprised of components with deterministic reliability. We propose a new meta-heuristic, inspired by the behavior of bats hunting prey, to find component allocation and redundancy levels that provide optimal or near-optimal system reliability levels. Each component alternative has an associated cost and weight and the system is constrained by cost and weight factors. We allow for component mixing within a subsystem, with a pre-defined maximum level …

Investigation Of Cnt-Induced Escherichia Coli Lysis And Protein Release, Abdollah Mosleh

Graduate Theses and Dissertations

This research investigated the use of carbon nanotubes (CNTs) as a treatment to increase the permeability of a bacterial cell wall. Recombinant Escherichia coli BL21 (DE3) containing a plasmid that expressed Green Fluorescent Protein (GFP) and -lactamase were exposed to CNTs under various levels of agitation for different times. Fluorescence assay for GFP, optical absorbance for -lactamase activity, and Transmission Electron Microscopy (TEM) were used to determine the amount of released protein, and visually examine the permeability enhancement of the cells, respectively. It was found that more -lactamase was present in the culture fluid after treatment with CNTs in a …

Compact Modeling Of Sic Insulated Gate Bipolar Transistors, Sonia Perez

Graduate Theses and Dissertations

This thesis presents a unified (n-channel and p-channel) silicon/silicon carbide Insulated Gate Bipolar Transistor (IGBT) compact model in both MAST and Verilog-A formats. Initially, the existing MAST model mobility equations were updated using recently referenced silicon carbide (SiC) data. The updated MAST model was then verified for each device tested. Specifically, the updated MAST model was verified for the following IGBT devices and operation temperatures: n-channel silicon at 25 ˚C and at 125 ˚C; n-channel SiC at 25 ˚C and at 175 ˚C; and p-channel SiC at 150 ˚C and at 250 ˚C. Verification was performed through capacitance, DC output …

Photoluminescence Measurement On Low-Temperature Metal Modulation Epitaxy Grown Gan, Yang Wu

Graduate Theses and Dissertations

A low-temperature photoluminescence (PL) study was conducted on low-temperature metal modulation epitaxy (MME) grown GaN. By comparing the PL signal from high temperature grown GaN buffer layers, and MME grown cap layers on top of the buffer layers, it was found that MME grown GaN cap has a significantly greater defect-related emission. The band edge PL from MME grown GaN found to be 3.51eV at low temperature. The binding energy of the exciton in GaN is determined to be 21meV through temperature dependence analysis. A PL peak at 3.29eV was found in the luminescence of the MME grown cap layer, …

Modeling And Simulation Of 1700 V 8 A Genesic Superjunction Transistor, Staci E. Brooks

Graduate Theses and Dissertations

The first-ever 1.7kV 8A SiC physics-based compact SPICE model is developed for behavior prediction, modeling and simulation of the GeneSiC “Super” Junction Transistor. The model implements Gummel-Poon based equations and adds a quasi-saturation collector series resistance representation from a 1.2 kV, 6 A SiC bipolar junction transistor model developed in Hangzhou, China. The model has been validated with the GA08JT17-247 device data representing both static and dynamic characteristics from GeneSiC. Parameter extraction was performed in IC-CAP and results include plots showing output characteristics, capacitance versus voltage (C-V), and switching characteristics for 25 °C, 125 °C, and 175 °C temperatures.

Chlorine Demand Shows Thresholds And Hierarchy With Source Water Quality At Beaver Lake, Arkansas, Jaime M. Gile

Graduate Theses and Dissertations

This study investigated the effects of source water quality in Beaver Lake on the amount of chlorine (Cl) needed to develop decision support system to help guide chlorination practices in pre-treatment of source water. Chlorine demand assays were performed on water samples from Beaver Lake collected from the intake structure at Beaver Water District from March 2014 through August 2015, and using data from these assays, the two points of interest in this study were the Cl dose at which Cl residuals began to accumulate and the mean Cl demand occurring after that dose. Three methods of analysis were used …