Engineering Commons^™

Optimizing The Plasmonic Enhancement Of Light In Metallic Nanogap Structures For Surface-Enhanced Raman Spectroscopy, Stephen Joseph Bauman

Graduate Theses and Dissertations

Technology based on the interaction between light and matter has entered something of a renaissance over the past few decades due to improved control over the creation of nanoscale patterns. Tunable nanofabrication has benefitted optical sensing, by which light is used to detect the presence or quantity of various substances. Through methods such as Raman spectroscopy, the optical spectra of solid, liquid, or gaseous samples act as fingerprints which help identify a single type of molecule amongst a background of potentially many other chemicals. This technique therefore offers great benefit to applications such as biomedical sensors, airport security, industrial waste …

Impedance Sensing Of Cancer Cells Directly On Sensory Bioscaffolds Of Bioceramics Nanofibers, Hanan Alismail

Graduate Theses and Dissertations

Cancer cell research has been growing for decades. In the field of cancer pathology, there is an increasing and long-unmet need to develop a new technology for low-cost, rapid, sensitive, selective, label-free (i.e. direct), simple and reliable screening, diagnosis, and monitoring of live cancer and normal cells in same shape and size from the same anatomic region. For the first time on using an impedance signal, the breast cancer and normal cells have been thus screened, diagnosed and monitored on a smart bioscaffold of entangled nanowires of bioceramics titanate grown directly on the surface of implantable Ti-metal and characterized by …

Stability Analysis Of A High-Power Microgrid, David Manuel Carballo Rojas

Graduate Theses and Dissertations

The objective of this thesis is to perform the modeling and stability analysis of a high-power microgrid with multiple parallel-and grid connected voltage source converters using the system parameters from the high-power microgrid testbed at the National Center for Reliable Electric Power Transmission (NCREPT) at the University of Arkansas in order to identify, minimize, if not eliminate, the potential instabilities that can affect the proper operation of the microgrid testbed. To achieve this objective, the mathematical modeling of the high-power microgrid considering the adverse effects of resonances due to interactions among the converter LCL output filters is presented and analyzed. …

Fully Analog Laser Driver With Robust Active Feedback Control, John Petrilli

Graduate Theses and Dissertations

The objective of this project was to go through a real life engineering development cycle, document and justify the design choices, and use background experience in electronic design and control systems to implement the best design possible. The laser driver implemented in this project is designed for the general use of a large variety of diodes in continuous wave mode, much like off the shelf laser drivers. The design goals included improving upon off the shelf laser drivers by decreasing steady state error, setting time, response time, and overshoot. Many different feedback control systems were evaluated, and a modified PID …

Smart Surge Irrigation Using Microcontroller Based Embedded Systems And Internet Of Things, Prashant Dinkar Borhade

Graduate Theses and Dissertations

Surge Irrigation is a type of furrow irrigation and one of many efficient irrigation techniques. It is one of the economical techniques and requires minimum labor for monitoring it. In surge irrigation, water is applied intermittently to a field to achieve uniform distribution of water along the furrows, which is important while irrigating, as it ensures that there is enough water near the root zone of the crop. The uneven distribution can cause a loss in crop productivity.

Surge irrigation uses a surge valve, which is an electro-mechanical device that irrigates a field. The commercial surge valves available on the …

Collaborative Robotic Path Planning For Industrial Spraying Operations On Complex Geometries, Steven Brown

Graduate Theses and Dissertations

Implementation of automated robotic solutions for complex tasks currently faces a few major hurdles. For instance, lack of effective sensing and task variability – especially in high-mix/low-volume processes – creates too much uncertainty to reliably hard-code a robotic work cell. Current collaborative frameworks generally focus on integrating the sensing required for a physically collaborative implementation. While this paradigm has proven effective for mitigating uncertainty by mixing human cognitive function and fine motor skills with robotic strength and repeatability, there are many instances where physical interaction is impractical but human reasoning and task knowledge is still needed. The proposed framework consists …

Investigation Of A Gan-Based Power Supply Topology Utilizing Solid State Transformer For Low Power Applications, Akrem Mohamed Elrajoubi

Graduate Theses and Dissertations

Gallium nitride (GaN) power devices exhibit a much lower gate capacitance for a similar on-resistance than its silicon counterparts, making it highly desirable for high-frequency operation in switching converters, which leads to their significant benefits on power density, cost, and system volume. High-density switching converters are being realized with GaN power devices due to their high switching speeds that reduce the size of energy-storage circuit components. The purpose of this dissertation research is to investigate a new isolated GaN AC/DC switching converter based on solid-state transformer configuration with a totem-pole power factor corrector (PFC) front-end, a half-bridge series-resonant converter (SRC) …

Intelligent Application Of Flexible Ac Transmission System Components In An Evolving Power Grid, Robert Wall

Graduate Theses and Dissertations

The world revolves around energy and the energy sector is continually transforming and evolving. The status quo has been set by governing agencies in the United States for completely reliable power. The demand for energy efficiency continually rises for multiple reasons. Technology has improved for all sectors of the power grid, including renewable energy sources, fault protection, and SMART grid technology. The addition of new energy sources has led to the decommissioning of inefficient energy sources. The implementation of new technologies and power load on a large scale, coupled with the removal of grid stabilizers has posed different challenges that …

Classifying Interdependencies In The Food And Agriculture Critical Infrastructure Sector, John Doerpinghaus

Graduate Theses and Dissertations

This work classifies examples of infrastructure interdependencies found in the food and agriculture critical infrastructure sector. Interdependencies are identified through an examination of rice and poultry agriculture throughout the state of Arkansas. The subtleties of interdependence examples in the food and agriculture sector are inadequately captured by the well-studied interdependence classification taxonomies. Through 39 interviews, we develop an understanding of the subtle temporal, geographic, and productivity scales of interdependence in over 100 examples and present five new, distinct classifications of interdependence: (1) dynamic physical, (2) dynamic geographic, (3) deadline, (4) delay, and (5) human, economic, and natural resource interdependencies. An …

Comparative Study Of Power Semiconductor Devices In A Multilevel Cascaded H-Bridge Inverter, Kenneth Mordi

Graduate Theses and Dissertations

This thesis compares the performance of a nine-level transformerless cascaded H-bridge (CHB) inverter with integrated battery energy storage system (BESS) using SiC power MOSFETs and Si IGBTs. Two crucial performance drivers for inverter applications are power loss and efficiency. Both of these are investigated in this thesis. Power devices with similar voltage and current ratings are used in the same inverter topology, and the performance of each device is analyzed with respect to switching frequency and operating temperature. The loss measurements and characteristics within the inverter are discussed. The Saber® simulation software was used for the comparisons. The power MOSFET …

Budget-Constrained Regression Model Selection Using Mixed Integer Nonlinear Programming, Jingying Zhang

Graduate Theses and Dissertations

Regression analysis fits predictive models to data on a response variable and corresponding values for a set of explanatory variables. Often data on the explanatory variables come at a cost from commercial databases, so the available budget may limit which ones are used in the final model.

In this dissertation, two budget-constrained regression models are proposed for continuous and categorical variables respectively using Mixed Integer Nonlinear Programming (MINLP) to choose the explanatory variables to be included in solutions. First, we propose a budget-constrained linear regression model for continuous response variables. Properties such as solvability and global optimality of the proposed …

Growth And Characterization Of Silicon-Germanium-Tin Semiconductors For Future Nanophotonics Devices, Bader Saad Alharthi

Graduate Theses and Dissertations

The bright future of silicon (Si) photonics has attracted research interest worldwide. The ultimate goal of this growing field is to develop a group IV based Si foundries that integrate Si-photonics with the current complementary metal–oxide–semiconductor (CMOS) on a single chip for mid-infrared optoelectronics and high speed devices. Even though group IV was used in light detection, such as photoconductors, it is still cannot compete with III-V semiconductors for light generation. This is because most of the group IV elements, such as Si and germanium (Ge), are indirect bandgap materials. Nevertheless, Ge and Si attracted industry attention because they are …

Experimentation And Modeling Of The Effects Of Along-Wind Dispersion On Cloud Characteristics Of Finite-Duration Contaminant Releases In The Atmosphere, Jessica M. Morris

Graduate Theses and Dissertations

Along-wind dispersion, or stretching of the cloud in the direction of the wind, plays an important role in the concentration and modeling of contaminant releases in the atmosphere. Theoretical and empirical derivations were compared for appropriate parameterization of along-wind dispersion. Available field data were analyzed to evaluate and improve previous parameterizations of the along-wind dispersion coefficient, σ_x. An experimental test program was developed and executed in an ultra-low speed wind tunnel at the Chemical Hazards Research Center to determine the effects of the time distribution coefficient on true finite-duration releases from an original area source. Multiple wind speeds, release durations, …

Measuring Characteristic Shrinkage Variability Due To Metal Loading Effects In Low Temperature Co-Fired Ceramic Using Image Processing, John Ezekiel Zumbro

Graduate Theses and Dissertations

Low temperature co-fired ceramic (LTCC) has many benefits when it comes to electronic packaging due to the low dielectric loss, reliability in extreme environments, and high breakdown voltage. Though the ceramic has a lot of benefits it is not widely used due to the high cost and complexities associated with manufacturing. One of these issues with manufacturing is compensating for the shrinkage of the ceramic, this is accomplished by using an expansion factor, creating the “green” or manufactured design. This expansion factor is approximated through knowledge of the ceramic factors such as the metal loading, layers of ceramic tape, firing …

Geophysical Assessment Of Subsurface Soil Conditions Using Capacitively Coupled Resistivity, Folaseye Coker

Graduate Theses and Dissertations

The purpose of this research is to explore the applicability of Capacitively-Coupled Resistivity (CCR) as an improvement on traditional drilling and sampling methods for subsurface soil investigations. The CCR method could be used to identify critical locations for drilling and sampling such as expansive clay layers and anomalies (sinkholes, unknown landfills, etc.) rather than uniformly sampling across a site. CCR surveys were performed at Alpena, Arkansas along a highway expansion project changing US 62 from a two lane to four lane highway, and at Alton, Illinois along the Mel Price Levee, a 5.2 mile levee along a portion of the …

Computer Modeling Of Close-To-Ground Tornado Wind-Fields For Different Tornado Widths, Mohammadhossein Kashefizadeh

Graduate Theses and Dissertations

Tornadoes induce different wind forces on buildings than straight-line (SL) winds. The tangential velocity (Vθ) of tornados is the main parameter that causes damage to the buildings. In-field tornado measurements cannot evaluate the tornado’s Vθ at less than 20m above ground level (AGL). The laboratory tornado simulators suggest that the Swirl ratio (S) and the radius (ro) are the most influential factors affecting Vθ. However, due to scaling problems, laboratory simulators cannot report the Vθ for elevations less than 10m AGL. Well refined computational fluid dynamics (CFD) models can evaluate the Vθ at less than 10m AGL. However, the CFD …

Proposed Astm Standard For The Stokoe-Type Resonant Column Torsional Shear Device, Anh Tuan Tran

Graduate Theses and Dissertations

Resonant Column Torsional Shear (RCTS) testing has become one of the most commonly used methods for determining laboratory soil stiffness and soil damping. The RCTS test has been accepted and is commonly utilized during the permitting of new nuclear facilities. However, there is still no available public standard for performing RCTS tests using the Stokoe-type device. Therefore, an ASTM standard for calibration and performance of RCTS tests using the Stokoe-type RCTS device is presented herein. Data collected using the Stokoe-type RCTS devices at the University of Arkansas (UofA) and at the Norwegian Geotechnical Institute (NGI) also aided in the development …

Testing And Development Of Pre-Stressed Cfrp Retrofit Strategies For Controlling Fatigue Cracking In Steel Waterway Lock Gate Structures, Maggie Langston

Graduate Theses and Dissertations

Steel waterway lock gates across the national inland waterway transportation network are reaching and exceeding their intended service life, often experiencing component failures that lead to service interruptions. Unscheduled maintenance and repair of lock gates can be expensive and cause economic ripples throughout the entire inland waterway network. These lock gate component failures are often caused by fatigue cracking from repeated loading during operation. This thesis develops and tests a prestressed carbon fiber reinforced polymer (CFRP) fatigue retrofit for controlling fatigue demands within lock gate components. The study expands upon a recent analytical work by Lozano (2017) by experimentally investigating …

Sustainability Of Utilizing Renewable And Nuclear Energy In Saudi Arabia Using Different Types Of Life Cycle Assessment, Kamel Almutairi

Graduate Theses and Dissertations

Evaluating the global environmental impacts of the current and future energy policies in Saudi Arabia using Life cycle assessment (LCA) method was the main objective of this dissertation. First, the attributional life cycle assessment (ALCA) framework was used to evaluate the Saudi’s air conditioning systems, as they are responsible for about 70% of the total Saudi residential electricity consumption. The ALCA’s results showed that the AC use phase produces the largest share of the environmental impact and the magnitude of the environmental impacts is influenced by the type of primary fuel used for electricity generation.

Emerging non-fossil sources of electricity …

Efficacy Of Multi-Threshold Null Convention Logic In Low-Power Applications, Brent Bell

Graduate Theses and Dissertations

In order for an asynchronous design paradigm such as Multi-Threshold NULL Convention Logic (MTNCL) to be adopted by industry, it is important for circuit designers to be aware of its advantages and drawbacks especially with respect to power usage. The power tradeoff between MTNCL and synchronous designs depends on many different factors including design type, circuit size, process node, and pipeline granularity. Each of these design dimensions influences the active power and the leakage power comparisons. This dissertation analyzes the effects of different design dimensions on power consumption and the associated rational for these effects. Results show that while MTNCL …

Evaluation Of A Solar Powered Variable Flow Tail Water Recovery System For Furrow Irrigation, Vaishali Kandpal

Graduate Theses and Dissertations

Furrow irrigation is a very common irrigation method for growing crops like soybean, cotton and corn in Arkansas. A major portion of this irrigation water is lost as runoff from the field significantly reducing the irrigation application efficiency. There are various methods of improving irrigation efficiency and one of the methods is using tail-water recovery. A tail-water recovery system utilizes tail-water recovery ditches or pits to collect tail-water which can be re-used for irrigation. However, this method is very labor intensive and has been found to be economically non-feasible for some farms in the past research studies. In order to …

Gold Nanoparticles For Stem Cell Delivery In Myocardial Infarction: Analysis Of Toxicity And Development Of A Cell Culture Platform For Use In An In-Vitro Model Of Mi-Associated Ischemia/Reperfusion, Jeffrey Curran Henson

Graduate Theses and Dissertations

In this work, the potential for PEGylated gold nanoparticles for use as a platform for stem cell delivery in treatment of myocardial infarction (MI) is preliminarily investigated. Cardiovascular disease is currently the leading cause of death worldwide, with majority of mortality resulting from coronary artery disease and associated MI. The ensuing ischemic conditions resulting from MI cause substantial heart muscle tissue loss and scarring in the heart. Adverse tissue remodeling creates a significant loss in heart function that can result in the formation of cardiac hypertrophy, ventricular dilation and arrythmias. The long-term prognosis of patients who have suffered MI is …

Membrane-Based Separation Processes For Treating High Salinity Produced Waters, Kamyar Sardari

Graduate Theses and Dissertations

Produced waters (PW) generated in the oil and gas industry within the United States often contain extreme levels of total dissolved solids (TDS). These high TDS waste streams need to be treated cost-effectively as the costs associated with the current management techniques can exceed 15 USD per barrel of discharged PW. Thermally and osmotically-driven membrane separation technologies can show promising potential for treating high TDS waste streams, as onsite low-grade waste heat may be used for their operation. In this dissertation, the application of membrane distillation (MD), forward osmosis (FO) and a hybrid FO-MD process for treating synthetic and actual …

Configuring Traditional Multi-Dock, Unit-Load Warehouses, Mahmut Tutam

Graduate Theses and Dissertations

The development of expected-distance formulas for multi-dock-door, unit-load warehouse configurations is the focus of the dissertation. From formulations derived, the width-to-depth ratios minimizing expected distances are obtained for rectangle-shaped, unit-load warehouse configurations. Partitioning the storage region in the warehouse into three classes, the performance of a multi-dock-door, unit-load warehouse is studied when storage regions can be either rectangle-shaped or contour-line-shaped. Our first contribution is the development of formulas for expected distance traveled in storing and retrieving unit loads in a rectangle-shaped warehouse having multiple dock doors along one warehouse wall and storage racks aligned perpendicular to that wall. Two formulations …

Modeling And Solution Approaches For Non-Traditional Network Flow Problems With Complicating Constraints, Negin Enayaty Ahangar

Graduate Theses and Dissertations

In this dissertation, we model three network-based optimization problems. Chapter 2 addresses the question of what the operation plan should be for interdependent infrastructure systems in resource-constrained environments so that they collectively operate at the highest level. We develop a network-based operation model of these systems that accounts for interdependencies among them. To solve this large-scale model, a solution approach is proposed that relatively quickly generates high-quality solutions to the problem.

Chapter 3 presents a routing model for a single train within a railyard with the objective of minimizing the total length traveled by train. The difference between this problem …

Barge Prioritization, Assignment, And Scheduling During Inland Waterway Disruption Responses, Liliana Delgado-Hidalgo

Graduate Theses and Dissertations

Inland waterways face natural and man-made disruptions that may affect navigation and infrastructure operations leading to barge traffic disruptions and economic losses. This dissertation investigates inland waterway disruption responses to intelligently redirect disrupted barges to inland terminals and prioritize offloading while minimizing total cargo value loss. This problem is known in the literature as the cargo prioritization and terminal allocation problem (CPTAP). A previous study formulated the CPTAP as a non-linear integer programming (NLIP) model solved with a genetic algorithm (GA) approach. This dissertation contributes three new and improved approaches to solve the CPTAP.

The first approach is a decomposition …

High-Sn-Content Gesn Alloy Towards Room-Temperature Mid Infrared Laser, Wei Dou

Graduate Theses and Dissertations

Si photonics is a rapidly expanding technology that integrates photonic circuits onto a Si substrate. The integration of Si electronics and photonics has been a successful technology for a wide range of applications. Group-IV alloy GeSn has drawn great attentions as a complementary metal–oxide–semiconductor compatible optoelectronic material for Si photonics. The devices based on GeSn alloy could be monolithically integrated into well-established and high-yield Si integrated circuits, which is favorable for chip-scale Si photonics featuring smaller size, lower cost, and higher reliability.

The relaxed GeSn with high material quality and high Sn composition is highly desirable to cover mid-infrared wavelength. …

Opto-Thermal Characterization Of Plasmon And Coupled Lattice Resonances In 2-D Metamaterial Arrays, Vinith Bejugam

Graduate Theses and Dissertations

Growing population and climate change inevitably requires longstanding dependency on sustainable sources of energy that are conducive to ecological balance, economies of scale and reduction of waste heat. Plasmonic-photonic systems are at the forefront of offering a promising path towards efficient light harvesting for enhanced optoelectronics, sensing, and chemical separations. Two-dimensional (2-D) metamaterial arrays of plasmonic nanoparticles arranged in polymer lattices developed herein support thermoplasmonic heating at off-resonances (near infrared, NIR) in addition to regular plasmonic resonances (visible), which extends their applicability compared to random dispersions. Especially, thermal responses of 2-D arrays at coupled lattice resonance (CLR) wavelengths were comparable …

Si-Based Germanium Tin Photodetectors For Short-Wave And Mid-Wave Infrared Detections, Thach Pham

Graduate Theses and Dissertations

The demand of light-weight and inexpensive imaging system working in the infrared range keeps increasing for the last decade, especially for civil applications. Although several group IV materials such as silicon and germanium are used to realize detectors in the visible and near infrared region, they are not the efficient approach for imaging system in the short-wave infrared detection range and beyond due to bandgap limit. On the other hand, this market is heavily relied upon mature technology from III-V and II-VI elements over years, which are costly to growth and incompatible with available Si complementary metal-oxide-semiconductor (CMOS) foundries. This …

Determining The Effect Of Locally Delivered Bioactive Modulators On Macrophage Activation At The Implantation Site Of Different Biomaterials In Rats, Kamel Alkhatib

Graduate Theses and Dissertations

Altering the foreign body reaction by targeting macrophages has been of interest in the biomaterials field to improve the integration of longevity of implanted biomedical devices. The objective of this dissertation was to study the effect of locally delivered bioactive modulators on macrophage activation at the implantation site of different biomaterials in rats. Iloprost, a prostacyclin analog, was tested for its ability to direct macrophages to their pro-wound healing phenotype after the implantation of microdialysis probe in the subcutaneous space of male Sprague Dawley rats. This study showed that iloprost can shift macrophage activation states in vivo to the pro-wound …