Engineering Commons^™

Full Binary Combination Schema For Floating Voltage Source Multi-Level Inverters, X. Kou, Keith Corzine, Yakov L. Familiant

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents schema of operation for floating voltage source multi-level inverters. The primary advantage of the proposed schema is that the number of voltage levels (and thus power quality) can be increased for a given number of semiconductor devices when compared to the conventional "flying capacitor" topology. However, the new schema requires fixed floating sources instead of capacitors and therefore is more suitable for battery power applications such as electric vehicles, flexible AC transmission systems and submarine propulsion. Alternatively transformer/rectifier circuits may be used to supply the floating sources in a similar way to cascaded H-bridge inverters. Computer simulation …

High Q Shielded Dielectric Resonator -- The Basis Of Stable Mm-Waves Generator, V. V. Kutuzov, Sergey Kharkovsky, V. A. Solodovnik, K. A. Kutuzov

Electrical and Computer Engineering Faculty Research & Creative Works

High Q-factor whispering gallery modes which are excited in a shielded hemispherical dielectric resonator by an external signal or Gunn diode are investigated. Their application as modes of an oscillator with high frequency stability is proposed. The power of the output signal and frequency tuning of an oscillator based on the investigated resonator are measured.

Development Of A Program For Numerical Analysis Of Microwave Radio Links Under Different Conditions, M. Can, Sergey Kharkovsky

Electrical and Computer Engineering Faculty Research & Creative Works

Numerical analysis of system power budget is performed for radio link design and transmission planning purposes in cellular networks. The behavior of three different frequencies; 10.5 GHz, 23 GHz and 38 GHz is examined under the influence of such parameters like transmitter power output level, rain rate, fog density, distance, polarization type, antenna radius, temperature, foliage depth and etc. Received power levels are measured, calculated and reported for different radio link types and environmental conditions. A new program is developed in order to carry out system power budget analysis and design better microwave radio links. Measured and calculated values are …

Intelligent Control Of Turbogenerator Exciter/Turbine On The Electric Power Grid To Improve Power Generation And Stability, Ganesh K. Venayagamoorthy, Ronald G. Harley, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

A review of the applications of intelligent control to replace/augment the conventional excitation and/or turbine control of turbogenerators on the electric power grid is presented in the paper. The intelligent controller designs are based on neural networks and adaptive critic designs (ACDs). The feedback variables are completely based on local measurements from the generators. Simulations and some practical laboratory implementations on a single-machine-infinite-bus and a three-machine power system demonstrate that intelligent controllers are much more effective than the conventional PID control for improving dynamic performance and stability of the power grid under small and large disturbances. The safety margins on …

Whispering-Gallery Modes In Shielded Hemispherical Dielectric Resonators, Sergey Kharkovsky, Z. E. Eremenko, V. V. Kutuzov, A. E. Kogut, Yuri F. Filipov

Electrical and Computer Engineering Faculty Research & Creative Works

The results of the numerical and experimental investigations of whispering-gallery (WG) modes in shielded hemispherical dielectric resonators are presented in this paper. It is shown that the Q factor of WG modes in the shielded resonator can be ten times much higher than the Q factor of the similar open hemispherical dielectric-resonator modes. Shielding the resonator can decrease the dimensions of both the dielectric hemisphere and resonator as a whole, saving the high-Q factor of WG modes. The usage of a cylindrical shield and local flat reflectors in the experiment provides the investigation of the high-Q factor of WG modes …

Full Binary Combination Schema For Floating Voltage Source Multilevel Inverters, Xiaomin Kou, Keith Corzine, Yakov L. Familiant

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents schema of operation for floating voltage source multilevel inverters. The primary advantage of the proposed schema is that the number of voltage levels (and thus power quality) can be increased for a given number of semiconductor devices when compared to the conventional "flying capacitor" topology. However, the new schema requires fixed floating sources instead of capacitors and therefore is more suitable for battery power applications such as electric vehicles, flexible AC transmission systems and submarine propulsion. Alternatively transformer/rectifier circuits may be used to supply the floating sources in a similar way to cascaded H-bridge inverters. Computer simulation …

Experimental Verification Of Derivatives Adaptive Critic Based Neurocontroller Performance On Single Turbogenerators On The Electric Power Grid, Ganesh K. Venayagamoorthy, Donald C. Wunsch, Ronald G. Harley

Electrical and Computer Engineering Faculty Research & Creative Works

The design and real-time implementation of derivatives adaptive critic based neurocontrollers that replace the conventional automatic voltage regulators (AVRs) and turbine governors are presented in this paper. The feedback variables to the neurocontroller are completely based on local measurements from the turbogenerator. Experimental verification results are presented to show the superior performance of the derivatives adaptive critic based neurocontroller, compared to the conventional AVR and turbine governor controllers equipped with a power system stabilizer.

Gunn Oscillators Based On Shielded Dielectric Resonators With Mechanical Frequency Tuning, Sergey Kharkovsky, V. I. Lutsenko, I. V. Lutsenko, V. K. Korneenkov, A. E. Kogut

Electrical and Computer Engineering Faculty Research & Creative Works

The features of Gunn oscillators based on shielded dielectric resonators with whispering gallery modes and ray oscillations are investigated. Their comparative analysis for oscillators with different dielectric resonant structures is carried out.

Improvement Of Power Quality In Vsi Drives, Badrul H. Chowdhury, Ravi Bantu

Electrical and Computer Engineering Faculty Research & Creative Works

The popular VSI (voltage source inverter) drives in use today are mostly PWM (pulse width modulated) drives. Harmonics produced by these drives cause heat losses, reduce the efficiency of the machine and also cause vibrations in the rotor. Active and passive filters are some of the methods to reduce the harmonics generated by these drives. A novel method is discussed which not only eliminates the 5/sup th/ harmonic but also any other negative sequence harmonics. This method, based on a reactor circuit, shows a reduction in harmonics and an improvement in the efficiency of the machine. The method can also …

Tissue Classification Through Analysis Of Gene Expression Data Using A New Family Of Art Architectures, Rui Xu, Georgios C. Anagnostopoulos, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

Correct classification is crucial to cancer diagnosis and treatment. We demonstrate that a new family of neural network architectures-Ellipsoid ART and ARTMAP (EA/EAM)-can cluster and classify tissues successfully through analysis of gene expression data generated by DNA microarray experiments

A New Control Strategy For The Unified Power Flow Controller, Lin Zhang, Liangying Dong, Mariesa Crow

Electrical and Computer Engineering Faculty Research & Creative Works

The unified power flow controller (UPFC) is the most versatile among a variety of flexible AC transmission system (FACTS) devices, which can be used for power flow control, enhancement of transient stability, damping system oscillations and voltage regulation. In this paper, we propose a new PI based approach for the dynamic control of UPFC. With the new control strategy, not only the active and reactive power flow control but also the system oscillations damping can be achieved. The digital simulation results developed in MATLAB and PSCAD/EMTDC environments are presented to verify the efficiency of the proposed control algorithm.

Interactive Virtual Laboratory For Experience With A Smart Bridge Test, Elizabeth C. Eckhoff, Vicki M. Eller, Steve Eugene Watkins, Richard Hall

Electrical and Computer Engineering Faculty Research & Creative Works

Virtual laboratory experiments can be cost effective, convenient instructional resources that have appeal to a wide range of learning styles. Expensive, time-consuming laboratory tests can be experienced repeatedly and remotely using interactive simulations and original video footage or animations. A virtual experiment can incorporate meaningful exercises, procedural options, and background hyperlinks to create a comprehensive "hands on" environment. Also, it may be used as preliminary training for the actual experiment.

An interactive LabVIEW-based laboratory for a load test simulation of an existing demonstration bridge was created. This smart truss bridge is instrumented with fiber optic strain sensors situated on the …

Comparison Of Mlp And Rbf Neural Networks Using Deviation Signals For Indirect Adaptive Control Of A Synchronous Generator, Jung-Wook Park, Ganesh K. Venayagamoorthy, Ronald G. Harley

Electrical and Computer Engineering Faculty Research & Creative Works

This paper compares the performances of a multilayer perceptron neurocontroller and a radial basis function neurocontroller for backpropagation through time based indirect adaptive control of the synchronous generator. Also, the neurocontrollers are compared with the conventional controller for small as well as large disturbances to the power system

Decoupling Strategies For Printed Circuit Boards Without Power Planes, Todd H. Hubing, Hwan-Woo Shim, Theodore M. Zeeff

Electrical and Computer Engineering Faculty Research & Creative Works

Traditional decoupling capacitors connected between V/CC/ and GND traces can be relatively ineffective at frequencies above their self-resonant frequency. This paper evaluates decoupling capacitor mounting strategies on boards without power planes. Techniques for minimizing mutual inductance and improving decoupling at frequencies above resonance are investigated.

Increased Mfcc Filter Bandwidth For Noise-Robust Phoneme Recognition, Mark D. Skowronski, John G. Harris

Electrical and Computer Engineering Faculty Research & Creative Works

Many speech recognition systems use mel-frequency cepstral coefficient (MFCC) feature extraction as a front end. In the algorithm, a speech spectrum passes through a filter bank of mel-spaced triangular filters, and the filter output energies are log-compressed and transformed to the cepstral domain by the DCT. The spacing of filter bank center frequencies mimics the known warped-frequency characteristics of the human auditory system, yet the bandwidths of these filters are not chosen through biological inspiration. Instead, they are set by aligning endpoints of the triangle, which is itself an arbitrary shape. It is surprising that for such a popular speech …

The Changing Roles Of Analog And Digital Signal Processing In Cmos Image Sensors, John G. Harris

Electrical and Computer Engineering Faculty Research & Creative Works

Throughout the years digital signal processing has been encroaching more and more into what had previously been exclusive analog circuit domains. Here we briefly summarize various lines of research in CMOS imaging sensoring technology paying special attention to the gradual transition from analog to digital processing. The transition from continuous-time continuous-value pixels to digital (discrete-time binary-value) pixels could be viewed as the natural final step in the evolution of these imaging circuits in order to achieve wide dynamic range with acceptable signal to noise ratio. After data is read off a digital pixel imager chip, digital signal processing is required …

Development Of A Testbed For Design And Evaluation Of Power Electronic Based Systems, S. Pekarek, J. Tichenor, N. Benavides, A. Koenig, H. Wang, Scott D. Sudhoff, B. Kuhn, S. Glover, D. Aliprantis, J. Byoun, J. Sauer

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a detailed technical description of a new hardware-based integrated power system testbed is presented. The testbed consists of an AC generation and propulsion system that is coupled to a DC zonal distribution system. A primary objective of the testbed is to provide a resource to the academic and industrial community by providing a non-proprietary system on which to demonstrate controls, survivability algorithms, and validate computer-aided design (CAD) tools. Copyright © 2002 Society of Automotive Engineers, Inc.

Stability Analysis Of A Dc Power Electronics Based Distribution System, Scott D. Sudhoff, Steven Pekarek, S. F. Glover, S. H. Zak, E. Zivi, J. D. Sauer, D. E. Delisle

Electrical and Computer Engineering Faculty Research & Creative Works

This paper illustrates the application of the generalized immittance space approach to the analysis of multi-bus interconnected power electronics-based power distribution system. The paper sets forth the basic classifications of power converters in regard to stability analysis, a set of network reduction transformations, and illustrates the use of these reductions in order to analyze the stability of a zonal dc distribution system. Copyright © 2002 Society of Automotive Engineers, Inc.

End To End Congestion Control In High-Speed Networks, Sarangapani Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

This paper proposes an adaptive methodology to prevent congestion in packet switched networks such as the Internet, where the internal network nodes convey very little information to the ingress nodes. Two architectures of preventing the congestion are presented: the first one when the traffic arrival rates, and bottleneck queue levels are known and the other when these are unknown. In the latter, the network traffic is estimated online using an adaptive system by measuring the buffer occupancy. In both architectures, the congestion is controlled by adjusting the transmission rates of non real-time and certain real-time sources in response to the …

Incorporation Of Cerium And Neodymium In A Uranyl Hydroxide Solid, Chang-Soo Kim, David J. Wronkiewicz, R. J. Finch, E. C. Buck

Electrical and Computer Engineering Faculty Research & Creative Works

The migration behavior of radionuclides in a nuclear-waste repository will be influenced, in part, by their equilibrium solubilities in the presence of radionuclide-bearing solids and/or adsorption affinities as trace components onto the surfaces of solid host phases. Uranium phases that precipitate on the surface of altered spent nuclear fuel may thus influence the mobility of radionuclides released in the near-field environment, since by proximity, these will be the first phases that the radionuclides encounter following their release from the spent fuel matrix. We have evaluated the potential for incorporating radionuclides into crystalline compounds by precipitating uranyl phases from aqueous solutions …

Two-Dimensional Fast Evanescent Wave Algorithm, W. C. Chew, L. (Lijun) J. Jiang, S. Velamparambil

Electrical and Computer Engineering Faculty Research & Creative Works

A new fast evanescent wave algorithm (FEWA) is introduced in the two-dimensional (2-D) case. It expands the Green's function into propagating waves and directional evanescent waves. Applying the evanescent wave correction technique, a procedure similar to the traditional MLFMA can be expedited. No buffer region is necessary anymore, and fewer translators are needed. Numerical examples are given to show the features of this method.

Energy Storage Systems For Advanced Power Applications, Aysen Arsoy, Yilu Liu, Paul F. Ribeiro, Brian K. Johnson, Mariesa Crow

Electrical and Computer Engineering Faculty Research & Creative Works

While energy storage technologies do not represent energy sources, they provide valuable added benefits to improve stability power quality, and reliability of supply. Battery technologies have improved significantly in order to meet the challenges of practical electric vehicles and utility applications. Flywheel technologies are now used in advanced nonpolluting uninterruptible power supplies. Advanced capacitors are being considered as energy storage for power quality applications. Superconducting energy storage systems are still in their prototype stages but receiving attention for utility applications. The latest technology developments, some performance analysis, and cost considerations are addressed. This paper concentrates on the performance benefits of …

Power System Deregulation, Mariesa Crow

Electrical and Computer Engineering Faculty Research & Creative Works

Given the difficulties encountered by the state of California in deregulating their electric power industry, many people are questioning the wisdom of such a move. To better understand the motivation behind deregulation, the author looks at the cost of energy nationwide in the United States. For example, she considers some of the regional energy costs from August 2001.

A Novel Neural Oscillator And Its Implementation In Analog Vlsi, Qiang Luo, John G. Harris

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents a novel neural oscillator model that is inspired by biological oscillation models and is easily implemented in subthreshold analog CMOS VLSI. The proposed model uses local coupling among neuron units. Synchrony and information propagation are demonstrated in chains and rings of the oscillators. © 2001 IEEE.

Dc Power-Bus Modeling And Design With A Mixed-Potential Integral-Equation Formulation And Circuit Extraction, Jun Fan, James L. Drewniak, Hao Shi, James L. Knighten

Electrical and Computer Engineering Faculty Research & Creative Works

Application of a circuit extraction approach based on a mixed-potential integral equation formulation (CEMPIE) for dc power-bus modeling in high-speed digital designs is detailed herein. Agreement with measurements demonstrates the effectiveness of the approach. Dielectric losses are included into the calculation of Green's functions, and thus, incorporated into the rigorous first principles formulation. A SPICE model is then extracted from the discretized integral equation. A quasistatic approximation is used for Green's functions to keep the extracted circuit elements frequency independent. Previous work has established a necessary meshing criterion in order to ensure accuracy for a given substrate thickness and dielectric …

Dc Power-Bus Design Using Fdtd Modeling With Dispersive Media And Surface Mount Technology Components, Xiaoning Ye, Marina Koledintseva, Min Li, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

DC power-bus modeling in high-speed digital design using the finite-difference time-domain (FDTD) method is demonstrated herein. The dispersive character of the dielectric layers used in printed circuit board substrates is taken into account in this study. In particular, FR-4 is considered. The complex permittivity of the dielectric is approximated by a Debye model. A wide-band frequency response (100 MHz-5 GHz) is obtained through a single FDTD simulation. Good agreement is achieved between the modeled and measured results for a typical dc power-bus structure with multiple surface mount technology (SMT) decoupling capacitors placed on the printed circuit board (PCB). The FDTD …

Emi Mitigation With Multilayer Power-Bus Stacks And Via Stitching Of Reference Planes, Xiaoning Ye, David M. Hockanson, Min Li, Yong Ren, Wei Cui, James L. Drewniak, Richard E. Dubroff

Electrical and Computer Engineering Faculty Research & Creative Works

General methods for reducing printed circuit board (PCB) emissions over a broad band of high frequencies are necessary to meet EMI requirements, as processors become faster and more powerful. One mechanism by which EMI can be coupled off a PCB or multichip module (MCM) structure is from high-frequency fringing electric fields on the dc power and reference planes at the substrate periphery An approach for EMI mitigation by stitching multiple ground planes together along the periphery of multilayer PCB power-bus stacks with closely spaced vias is reported and quantified in this paper. Power-bus noise induced EMI and coupling from the …

A Comparison Of Facts Integrated With Battery Energy Storage Systems, Lin Zhang, Shen Chen, Stan Atcitty, Mariesa Crow

Electrical and Computer Engineering Faculty Research & Creative Works

The integration of energy storage into FACTS devices lead to increased controller flexibility by providing decentralized active power capabilities. Combined FACTS/ESS can improve power flow control, oscillation damping and voltage control. This paper presents a comparison between the dynamic performance of a StatCom, a StatCom/BESS, an SSSC, an SSSC/BESS and a UPFC. Experimental verification is also presented.

Quantifying Smt Decoupling Capacitor Placement In Dc Power-Bus Design For Multilayer Pcbs, Jun Fan, James L. Drewniak, James L. Knighten, Norman W. Smith, Antonio Orlandi, Thomas Van Doren, Todd H. Hubing, Richard E. Dubroff

Electrical and Computer Engineering Faculty Research & Creative Works

Noise on a dc power-bus that results from device switching, as well as other potential mechanisms, is a primary source of many signal integrity (SI) and electromagnetic interference (EMI) problems. Surface mount technology (SMT) decoupling capacitors are commonly used to mitigate this power-bus noise. A critical design issue associated with this common practice in high-speed digital designs is placement of the capacitors with respect to the integrated circuits (ICs). Local decoupling, namely, placing SMT capacitors in proximity to ICs, is investigated in this study. Multilayer PCB designs that employ entire layers or area fills for power and ground in a …

Closure To Discussion Of "Voltage Stability Analysis: V-Q Power Flow Simulation Versus Dynamic Simulation", Badrul H. Chowdhury, C. W. Taylor

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.