Engineering Commons^™

Two And Three-Dimensional Models For Material And Cells Interaction, Nam H. Nguyen

Doctoral Dissertations

Three-dimensional (3D) cell spheroid model has been long considered a better model to mimic in vivo physiology compared to two-dimensional (2D) cell culture model. Traditional 2D cell models provide a simple, convenient and quick technique for drug screening but fail to simulate the complexity and heterogeneity of cells in the in vivo environment. The last few decades have remarked substantial progress toward the advancement of three-dimensional (3D) cell cultures as systems which better mimic cellcell and cell-matrix interaction in the in vivo physiology. Nowadays, 3D cell models have been emerging, not only as an important approach in drug discovery and …

Evaluation Of Carbon Footprint During The Life-Cycle Of Four Different Pipe Materials, Alhossin Alsadi

Doctoral Dissertations

As the world is moving to provide a better and cleaner environment for future generations, there is a critical need to quantify and try to reduce the environmental emission footprints of various industries. The construction industry, which emits a large amount of carbon dioxide (CO₂ ), is one of the targeted industries to decrease these emissions. Underground utility installations, especially in the development of residential communities in urban areas, are one of the largest construction projects across North America and, consequently, one primary source of emissions. Most of the pipelines in the U.S. are rapidly reaching the end of their …

Development Of An Astrocyte/Glioma Co-Culture System For Measuring Cellular Dynamics, Urna Kansakar

Doctoral Dissertations

Gliomas are brain tumors that primarily arise from glial cells. Gliomas account for 70% of the brain tumors and they are more prevalent in older adults. About 60% of the people with gliomas experience at least one seizure. Brain tumors can grow and metastasize to neighboring areas, thereby destroying normal brain cells. In a brain tumor microenvironment, both malignant cancer cells and healthy brain cells are present. Studies have shown that astrocytes may have a role in tumor growth in the brain. Monocultures cannot evaluate interactions between two cell types and does not accurately represent in vivo conditions. Thus, a …

Development Of A Counter-Flow Thermal Gradient Microfluidic Device, Shayan Davani

Doctoral Dissertations

This work presents a novel counter-flow design for thermal stabilization of microfluidic thermal reactors. In these reactors, precise control of temperature of the liquid sample is achieved by moving the liquid sample through the thermal zones established ideally through the conduction in the solid material of the device. The goal here is to establish a linear thermal distribution when there is no flow and to minimize the temperature change at flow condition. External convection as well as internal flowinduced effects influence the prescribed thermal distribution. The counter-flow thermal gradient device developed in this study is capable of both stabilizing the …

Military Applications Of Geological Engineering, Stephen H. Tupper

Doctoral Dissertations

"This work examines the premise that military engineering and geological engineering are intellectually paired and overlapped in practice to a significant extent. Geological engineering is an established, albeit young, academic discipline that enjoys wide industry and civil demand and is supported by many professional organizations. In contrast, military engineering is an ancient, empirically derived training or "OJT" program with practice-based trade-associations that has narrow government-only utility. The premise is formed by decades-long observation of U. S. Army military engineer officers completing a Master of Science degree in geological engineering as a complement to their practice-based training in military engineering at …

Numerical Modeling Study Of A Neutron Depth Profiling (Ndp) System For The Missouri S&T Reactor, Mubarak Mohammed Albarqi

Doctoral Dissertations

”For decades, Neutron Depth Profiling has been used for the non-destructive analysis and quantification of boron in electronic materials and lithium in lithium ion batteries. NDP is one of the few non-destructive analytical techniques capable of measuring the depth profiles of light elements to depths of several microns with nanometer spatial resolution. The technique, however, is applicable only to a handful of light elements with large neutron absorption cross sections. This work discusses the possibility of coupling Particle Induced X-ray Emission spectroscopy with Neutron Depth Profiling to yield additional information about the depth profiles of other elements within a material. …

Neuroengineering Of Clustering Algorithms, Leonardo Enzo Brito Da Silva

Doctoral Dissertations

"Cluster analysis can be broadly divided into multivariate data visualization, clustering algorithms, and cluster validation. This dissertation contributes neural network-based techniques to perform all three unsupervised learning tasks. Particularly, the first paper provides a comprehensive review on adaptive resonance theory (ART) models for engineering applications and provides context for the four subsequent papers. These papers are devoted to enhancements of ART-based clustering algorithms from (a) a practical perspective by exploiting the visual assessment of cluster tendency (VAT) sorting algorithm as a preprocessor for ART offline training, thus mitigating ordering effects; and (b) an engineering perspective by designing a family of …

Experimental Study On Enhanced Oil Recovery (Eor) Mechanisms Of Nanogel Combining With Low Salinity Water For Carbonate Reservoirs, Pu Han

Doctoral Dissertations

"Nanomaterials have been widely studied and applied in the oil and gas industry. Among the developed nanomaterials, nano-sized crosslinked polymeric gel particle (nanogel) has shown great potential in recovering residual oil and improving oil recovery. This dissertation carried out their potential EOR mechanisms and the synergetic effect between nanogel and low salinity water. Nanogel used in this study was synthesized through the suspension polymerization process in our lab. The morphology, size distribution, and zeta potential were studied for nanogel dispersed in brine with variable ionic strength. The injectivity of nanogel was elucidated at first to ensure their in-depth penetration ability. …

Smart Control Architecture For Microgrid Application, Vikram Roy Chowdhury

Doctoral Dissertations

"This research proposes non-linear control architectures dedicated towards improving transient response, reliability and computational burden for grid connected inverters applicable for ac micro-grids. Also this work proposes an optimization procedure applied to a small microgrid to reduce the billing cost for power incorporating battery degradation mechanism.

Three works are discussed in this research that discusses methodologies to improve the operation of a three phase grid connected inverters. The first work discusses a globally stable estimation architecture for estimating the plant parameters for a grid connected inverter during its operation. Then a Lyapunov based control architecture is utilized and online parameter …

Atomistic Simulations Of Deformation In Metallic Nanolayered Composites, Sixie Huang

Doctoral Dissertations

"The mechanical behavior of Metallic Nanolayered Composites (MNCs) is governed by their underlying microstructure. In this dissertation, the roles of the interlayer spacing (grain size, d) and the intralayer biphase spacing (layer thickness, h) on mechanical response of Cu/Nb MNCs are examined by Molecular Dynamics (MD) simulations. The study of the strength of MNCs show that small changes in both d and h play a profound role in the relative plastic contributions from grain boundary sliding and dislocation glide. The interplay of d and h leads to a very broad transition region from grain boundary sliding dominated flow, where the …

2x-Thru, 1x-Reflection, And Thru-Line De-Embedding: Theory, Sensitivity Analysis, And Error Corrections, Bichen Chen

Doctoral Dissertations

"Due to the simplicity of design and measurement, as well as the accuracy of results, the 2X-Thru de-embedding (2XTD), 1X-Reflection de-embedding (1XRD), and Thru-Line de-embedding (TLD) have been replaced the traditional de-embedding algorithms, such as TRL and SOLT. In this dissertation, theory of 2ⁿ-port 2XTD, 1XRD, and TLD are completely derived first. The self-error reduction schemes is introduced to mitigate the de-embedding errors due to non-ideal manufacturing effects of non-zero mode conversion terms, as well as the asymmetric, and manufacturing variations. The validations are performed on both theory and self-error reduction through simulation and measurements cases. The 2X-Thru …

Passive Harmonic Generation At Spring Contacts, Sen Yang

Doctoral Dissertations

"In the first paper, the RF passive harmonic generation phenomenon on the spring contact is studied. A spring contact harmonic generation measurement system is developed. The factors that may have an impact on the spring contact harmonic generation, such as contact material, contact force, and contact resistance are characterized by the measurement system. The gold-to-gold contact is found to be much superior to the stainless-steel contacts. It is also found that the passive nonlinearity at the spring contact is the semiconductor-like junction formed by the surface oxide film.

In the second paper, we show that the maximum E-field coupling occurs …

Mass Spectrometry Analysis Of Contaminants Of Emerging Concern: Nanoparticles, Algal Toxins, And Cyanotoxins In Natural Waters And Their Potential Health Impacts, Ariel R. Donovan

Doctoral Dissertations

“The analysis of contaminants of emerging concern is critical to protecting environmental health. In the presented dissertation, two groups of contaminants of emerging concern were assessed using mass spectrometry methods: nanoparticles and algal and cyanotoxins.

Analysis of metal oxide nanoparticles in environmental matrices has been a challenging issue, as most traditional methods require complicated sample preparation methods or that can alter or destroy the nanoparticles in the system. Single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) methods were used to detect metal oxide nanoparticles in surface waters and their removal through drinking water treatment simulations while retaining all information regarding …

Development Of Functional Ionic Liquids For Separation And Recovery Of Rare Earth Elements, Mostafa Khodakarami

Doctoral Dissertations

“This research focused on the design and synthesis of task-specific ionic liquids for enhanced extraction and separation of rare earth elements (REEs). Two novel ammonium-based functional ionic liquids (FILs) with oxygen donating groups: trioctyl(2-ethoxy-2-oxoethyl)ammonium dihexyl diglycolamate, [OcGBOEt][DHDGA], and tricaprylmethylammonium dihexyl diglycolamate, [A336][DHDGA] were synthesized and tested for the recovery and separation of selected REEs from aqueous solutions. Functionalities with different denticities were incorporated into both anionic and cationic parts of ionic liquids, which are solely composed of incinerable atoms including C, H, O, and N. The structural, physical, and chemical properties of the synthesized FILs were studied using nuclear magnetic …

Non-Invasive Microwave And Millimeter Wave Reflectometry And Imaging For Human Skin Diagnosis And Materials Characterization, Yuan Gao

Doctoral Dissertations

"Microwave and millimeter wave reflectometry and synthetic aperture radar (SAR) imaging techniques have been successfully applied in many applications, such as nondestructive testing and evaluation (NDT&E), security inspection and medical diagnosis. In this dissertation, the feasibility of using microwave and millimeter reflectometry and SAR imaging for burn diagnosis is investigated through both simulations and measurements, with promising results. To correctly model the interaction between electromagnetic waves and skin, the proper knowledge of the complex permittivity of healthy skin is critically important. To this end, the common used measurement methods for in vivo skin complex permittivity are reviewed and analyzed in …

Development And Characterization Of Nanostructured Steels And High Entropy Alloys For Nuclear Applications, Andrew Kalevi Hoffman

Doctoral Dissertations

"Nuclear reactor materials are subjected to a harsh environment including high temperatures and radiation fluences. In order to extend the lifetime of current light water reactors (LWRs) and realize the development of advanced Gen IV nuclear reactors new materials must be developed which can withstand such an environment. This thesis involves two approaches to solving this materials problem: advanced manufacturing of current commercial alloys using severe plastic deformation (SPD) and the development of new advanced high entropy alloys (HEAs).

Because SPD is effective at achieving grain refinement, this technique was used to obtain material having a high volume fraction of …

Development Of A Switchable Radioisotope Generator, Kyle Mitchell Paaren

Doctoral Dissertations

The Switchable Radioisotope Generator utilizes alpha-induced reactions to produce a combination of photons, neutrons, and protons with varying fluxes dependent on target materials and source geometry. The activity/strength of the secondary radiation is further controlled by manipulating the number of alpha particles that can interact with the target material(s). Analytical equations were solved to confirm secondary radiation production from target materials using average cross sections from TENDL data. TENDL and JENDL data was confirmed by analytically solving for the total alpha-induced cross sections. This information was used to produce the provisional and utility Patent No: US20190013109A1. TENDL data was then …

The Tabu Ant Colony Optimizer And Its Application In An Energy Market, David Donald Haynes

Doctoral Dissertations

"A new ant colony optimizer, the 'tabu ant colony optimizer' (TabuACO) is introduced, tested, and applied to a contemporary problem. The TabuACO uses both attractive and repulsive pheromones to speed convergence to a solution. The dual pheromone TabuACO is benchmarked against several other solvers using the traveling salesman problem (TSP), the quadratic assignment problem (QAP), and the Steiner tree problem. In tree-shaped puzzles, the dual pheromone TabuACO was able to demonstrate a significant improvement in performance over a conventional ACO. As the amount of connectedness in the network increased, the dual pheromone TabuACO offered less improvement in performance over the …

Epitaxial Growth Of Semiconductors And Chiral Metal Surfaces Using Spin Coating And Electrodeposition, Meagan V. Kelso

Doctoral Dissertations

"The current primary methods for epitaxial growth are energy intensive, requiring high temperature or high vacuum to obtain quality thin films. This dissertation explores the solution process methods of electrodeposition and spin coating for growth of epitaxial thin films. First, a method is developed to directly electrodeposit epitaxial CH₃NH₃PbI₃ perovskite for solar cells on single crystal Au by electrochemically reducing I₂ in organic solution. Perovskite is a newly explored material for solar cells, and its efficiency may be further improved by increasing the crystalline order. Second, a study on epitaxially electrodeposited chiral metal surfaces …

Investigating The Use Of Different Types Of Sealant Materials For Cement Remedial Applications, Murad Mohammedahmed Abdulfarraj

Doctoral Dissertations

"The overall objective is to investigate the ability of several material to mitigate cement failures such as channels, fractures, and micro-annuli in oil and gas wells. The sealant material that can also be used in the wells that are used for geologic storage of carbon dioxide CO₂. Evaluating the sealant material is critical to improve the zonal isolation of the wells, which would lead to safer operations. The approach of this dissertation is to utilize particles gel that has been used successfully in conformance control application, and epoxy resin systems, that have superior seal characteristics compared to conventional …

The Effects Of Fatigue And Weathering On The Failure Behavior Of Commercial Soda-Lime-Silicate Glass, Erica Ann Ronchetto

Doctoral Dissertations

"The principle objective of this research is to advance our understanding of the effects of humid conditions on the strength and susceptibility to fatigue of soda-lime silicate (SLS) glass. The two-point bend method was used to evaluate the fatigue characteristics and the degradation of failure strain of fibers drawn from melts of commercial soda-lime silicate glass and exposed to various environmental conditions. Soda lime silicate glasses from two commercial products but with similar nominal compositions were examined. One glass had pristine failure strains about 10% greater than the other, but both had similar fatigue parameters. The fatigue parameter increased from …

Active-Passive Dynamic Consensus Filters: Theory And Applications, John Daniel Peterson

Doctoral Dissertations

”This dissertation presents a new method for distributively sensing dynamic environments utilizing integral action based system theoretic distributed information fusion methods. Specifically, the main contribution is a new class of dynamic consensus filters, termed active-passive dynamic consensus filters, in which agents are considered to be active, if they are able to sense an exogenous quantity of interest and are considered to be passive, otherwise, where the objective is to drive the states of all agents to the convex hull spanned by the exogenous inputs sensed by active agents. Additionally, we generalize these results to allow agents to locally …

Build Strategy Investigation Of Ti-6al-4v Produced Via A Hybrid Additive Manufacturing Process, Lei Yan

Doctoral Dissertations

“Till now, laser metal deposition (LMD) has been developed with the capability of near-net shape high-performance metal parts fabrication, especially complicated titanium alloys, nickel alloys, and aluminum alloys. However, LMD processed parts usually do not meet end-use requirements without post treatments. In-process part quality inspection and inner features machining are impossible within a single LMD process. Hybrid additive manufacturing (HAM), which integrates additive and subtractive manufacturing in one process, has been proposed to increase the feasibility of complex parts fabrication. This dissertation aims to improve the applications of Ti-6Al-4V parts fabricated via a HAM technique. The first research topic is …

Improving Base Metal Electrowinning, Charles Ebenezer Abbey

Doctoral Dissertations

"In zinc electrowinning, Mn oxidizes to form MnO₂ on Pb-Ag anodes, cell walls and pipes. MnO₂ reduces anode corrosion but also leads to short circuits and maintenance issues. MnO₂ is thought to interact with chloride ions and produce oxidized chlorine species. The interactions between Mn and Cl are not well understood. Bench scale experiments were conducted to investigate the effects of the manganese to chloride ratio on anode corrosion rate and electrolyte chemistry using rolled Pb-Ag anodes. Increasing the average Mn/Cl^- ratio from ~7:1 to ~11:1 reduced the anode corrosion rate. Anode scales produced with Mn/Cl …

Transient Multiphase Flow Simulation For Unloading Of Frac Hit Gas Wells, Miguel Angel Cedeno Moreno

Doctoral Dissertations

"This work seeks to develop a fully step-by-step transient multiphase flow simulation valid for unloading gas wells using nitrogen. It studies the behavior of nitrogen for unloading horizontal gas wells with gas injection in the annulus. The work investigates unloading non-Newtonian fluids such as those which invade offset wells when a frac hit occurs during hydraulic fracturing operations in unconventional wells. The effect of varying tubing depth and injection pressure are included in the study.

Results show that as the plastic viscosity increases, the nitrogen volume and time to unload will be increased. As tubing depth increases, the nitrogen volume …

The Effects Of Low Aspect Ratio And Heat Exchanging Internals On The Bubble Properties And Flow Regime In A Pilot-Plant Bubble/Slurry Bubble Column For Fischer-Tropsch Synthesis, Hayder Al-Naseri

Doctoral Dissertations

"Fischer-Tropsch synthesis (F-T) is a process utilized to convert the syngas mixture of CO and H₂ to synthetic fuel and chemicals that executed commercially by using the bubble/slurry bubble column reactor. The experimental results reveal that the investigated parameters, in terms the presence of internals, and reducing the aspect ratio and the solids loading, increase the local gas holdup, interfacial area, bubble passage frequency, and decrease the bubble rise velocity, bubble chord length. Meanwhile, the aspect ratio H/D = 4, and 5 provide enough height to established the fully developed flow regime. As a result of the variation in …

Ferrite Characterization Techniques & Particle Simulations For Semiconductor Devices, Nicholas Erickson

Doctoral Dissertations

"This dissertation is divided into three papers, covering two major topics. The first topic, techniques for ferrite characterization, is discussed over the course of two papers. The second topic, particle simulations for semiconductor devices, is discussed in the last paper. In the first paper, the method for extracting permeability from ferrite materials is discussed for the Keysight 16454A permeability extraction fixture, where the ferrite material to be characterized is assumed to be homogeneous. Then the method is updated to account for layered materials. The updated method is verified through full-wave simulations. In the second paper, a planar printed circuit board …

Chemically-Bonded Enamel-Coated Steel Pipelines For Corrosion Protection And Flow Efficiency, Liang Fan

Doctoral Dissertations

"This study is to explore and develop chemically-bonded enamel coating (200-300 um) on steel pipes, when subjected to soil and thermal environments, in order to improve the corrosion protection and safety of hazardous liquid and natural gas pipelines while reducing pressure loss. Out of five types of enamels and their various mixtures, Tomatec slurry and GP2118 powder were selected for steel pipeline applications. They were applied at approximately 810 °C to the inside surface of steel pipes in wet and electrostatic processes, respectively. The thickness and surface roughness of the enamel coating were measured using a gauge and an optical …

Hardware Architectures For Compact Microwave And Millimeter Wave Cameras, Matthew Jared Horst

Doctoral Dissertations

"Millimeter wave SAR imaging has shown promise as an inspection tool for human skin for characterizing burns and skin cancers. However, the current state-of-the-art in microwave camera technology is not yet suited for developing a millimeter wave camera for human skin inspection. Consequently, the objective of this dissertation has been to build the necessary foundation of research to achieve such a millimeter wave camera. First, frequency uncertainty in signals generated by a practical microwave source, which is prone to drift in output frequency, was studied to determine its effect on SAR-generated images. A direct relationship was found between the level …

Detection And Elimination Of Rock Face Vegetation From Terrestrial Lidar Data Using The Virtual Articulating Conical Probe Algorithm, Kenneth John Boyko

Doctoral Dissertations

"A common use of terrestrial lidar is to conduct studies involving change detection of natural or engineered surfaces. Change detection involves many technical steps beyond the initial data acquisition: data structuring, registration, and elimination of data artifacts such as parallax errors, near-field obstructions, and vegetation. Of these, vegetation detection and elimination with terrestrial lidar scanning (TLS) presents a completely different set of issues when compared to vegetation elimination from aerial lidar scanning (ALS). With ALS, the ground footprint of the lidar laser beam is very large, and the data acquisition hardware supports multi-return waveforms. Also, the underlying surface topography is …