Engineering Commons^™

Kirigami Pattern Development For Gossamer Reflectarray Antenna, Ivy Running, Carolina Wright, Robert J. Lang, Larry Howell, Spencer Magleby

Utah Space Grant Consortium

Gossamer arrays for satellites are large, thin deployable structures, and they are attractive for space applications because they can be folded and stowed compactly for transportation and be deployed to have large functional surface areas. Reflectarray (RF) antennas could potentially function well on gossamer structures because they can be mounted on thin membranes. However, the efficiency of RF antennas decreases with any deviations from a flat plane, including those induced by plastically deformed creases. The study of origami allows us to design stowage configurations that meet specific needs. In this case, origami patterns and principles are explored that enable a …

A Survey Of Model Fits To Brown Dwarf Spectra Through The L-T Sequence, Savanah Turner, Denise Stephens

Utah Space Grant Consortium

Theoretical atmosphere models based on known physics and chemistry can be used as tools to interpret and understand our observations of brown dwarfs. We have fit archival near-infrared spectra of over 300 brown dwarfs with atmosphere models from the Sonora and Phoenix groups. Using the parameters of the best-fit models as estimates for the physical properties of the brown dwarfs in our sample, we have performed a survey of how brown dwarf atmospheres evolve with spectral type and temperature. We present the fit results and observed trends. We use these fit results to note where current atmosphere models are able …

Quantitative Analysis Of Terrestrial Caldera Shape And Applications In Planetary Geomorphology, Camille Cowan, Jani Radebaugh

Utah Space Grant Consortium

Volcanism on rocky planets and moons can yield valuable insights into their composition, evolution, and heat regime. This study creates a model to determine characteristics of extraterrestrial volcanoes based on imagery, one of the most abundant resources for studying other planetary bodies. We found that of 56 measured calderas, 61% were correctly classified into compositional categories based on shape alone. These results indicate that this model can be applied to calderas on other planets and moons to help constrain characteristics of their volcanism.

Target Position And Velocity Estimation Using Doppler Information From Wifi Signals, James Hyland, Todd K. Moon

Utah Space Grant Consortium

RF signals reflected off of a moving target experience a Doppler shift determined by the speed of the target. This can be used for target tracking, which could be useful in a variety of settings, such as using a communication signal to track a satellite, or to determine the location of a person within the space station. Although these reflections are weak compared to the signal seen from a direct path, the Doppler components can still be extracted. By processing Doppler signals from multiple receivers, the position and velocity of a target moving in the vicinity of the system can …

The Role Of Monitoring The Partial Pressure Of Oxygen In Urine For Early Detection Of Acute Kidney Injury, Lars Lofgren, Kai Kück, Natalie Silverton

Utah Space Grant Consortium

Acute kidney injury (AKI) is defined as an abrupt decrease in renal function due to structural injury. AKI has a large effect on critical care patients due to a relatively high occurrence and association with poor outcomes. Currently, the diagnostic tools that we have, serum creatinine and urine output, are delayed indicators of the presence of injury and simply capture the drop in renal function. However, there is evidence that renal hypoxia plays a role in the development of most forms of AKI. Furthermore, there is a correlation between the partial pressure of oxygen in urine (PuO₂) and …

Reference Channel Optimization In Bistatic & Passive Radar, Matthew Finger

Utah Space Grant Consortium

The thesis will cover the first steps and attempts to create a small scale bistatic radar using a Pluto software defined radio.

Water Banking As A Strategy For The Management And Conservation Of A Critical Resource: A Case Study From Tunisia's Medjerda River Basin (Mrb), Aymen Sawassi, Roula Khadra, Brian Crookston

Civil and Environmental Engineering Faculty Publications

The increasingly adverse impacts of climate change (e.g., rainfall patterns, droughts, and floods), coupled with the ever-increasing water demands, are often translated into a contingent liability for water users' communities. Additional complexities arise due to competing priorities, water rights, and transboundary water sources. Therefore, conventional water management practices should shift toward more comprehensive and responsive integrative approaches, even for systems with limited data. Furthermore, water managers must prioritize dynamic and interactive management techniques for existing systems. One such management technique is water banking, which is the focus of this study. Herein, a dynamic interactive water allocation model, which encompasses the …

Understanding Timing Error Characteristics From Overclocked Systolic Multiply-Accumulate Arrays In Fpgas, Andrew S. Chamberlin

All Graduate Theses and Dissertations, Fall 2023 to Present

Artificial Intelligence (AI) is one of the biggest fields of research for computer hardware right now. Hardware accelerators are chips (such as graphics cards) that are purpose built to be the best at a specific type of operation. AI hardware accelerators are a growing field of research. Part of hardware in general is a digital clock that controls the pace at which computations occur. If this clock runs too quickly, the hardware won't have enough time to finish its computation. We call that a timing error. This paper focuses on studying the characteristics of timing errors in a small custom …

Novel Kinetic Description Of Real-Time Polymerase Chain Reaction Characterizes Interrelated Effects Of Sample, Master Mix, And Cycle Time, David Tafur

All Graduate Theses and Dissertations, Fall 2023 to Present

Real-time quantitative polymerase chain reaction fluorescent curves are influenced by the quantification method, template length, primer sequence, polymerase activity, reaction conditions, and unwanted side reactions. Interpretation of these curves depends on understanding the subjacent mechanisms by which those factors can alter the curve profile, particularly on highly diluted analytes or impure samples. However, such factors are individually described today, or their interplay is not fully developed. The present work examines the effect of primer dimer formation and extension, resource competition, template reannealing, and polymerase thermodegradation, in addition to novel descriptions of polymerase competitive inhibition, extended primer amplification, and the probability …

Principles And Practices For Creating Inherently Resilient Smallsats Despite Constrained Resources, Lee Jasper, Tyler De Caussin

Space Dynamics Laboratory Publications

Over the past few years, small satellites have become heavily utilized for both constellations and single vehicle missions. Many organizations have learned how to be successful with these platforms however, while small, they are not simple systems and first-time creators of these systems still suffer high rates of failure. AFRL's Small Satellite Portfolio has established guiding practices/principles for satellite design that help reduce overall mission risk based upon both community and internal lessons learned. These principles help make the design technically resilient and can also help with programmatic execution. This paper will discuss the principles with some detail (such as …

Testing Resilience Of Microalgae Biofilms When Exposed To Hydrothermal Liquefaction Aqueous Phase, Davis Riley Haag

Undergraduate Honors Capstone Projects

There are a multitude of experimental and processing techniques in the bioenergy field that produce sustainable and carbon negative to carbon neutral methods of converting renewable resources into biologically based hydrocarbons. One example of a process is hydrothermal liquefaction (HTL) which specializes in converting wet biomass into biocrude oil. One reason that these processes are not used outside experimental testing is due to the high cost of performing these processes. There is potential to move these processes to larger scale testing and eventually industrial adaptation if breakthroughs are made to offset the process expenses. There is a waste product produced …

What Is Biological Engineering? – A Magazine, Morgan Christensen

Undergraduate Honors Capstone Projects

Biological Engineering is one of the less commonly known fields of engineering and can be challenging to describe to someone outside the discipline. The most common question I've been asked during my undergraduate career is "What is biological engineering?". My answer has changed throughout my time at Utah State University as I've had more experiences within the discipline. This project focuses on answering this question in the format of a magazine to help bridge the gap between those in the discipline and a general audience. By using a magazine as the format, the content must be organized and written in …

Pedestrian Crossing Environmental Impact Statement, Alyssa Gaither

Undergraduate Honors Capstone Projects

Logan, Utah is divided by US Highway 89/91, which bisects much of the city. This makes it difficult to pass to the other side without a vehicle. A pedestrian crossing has been proposed to connect the eastern and western sides of Logan without impacting traffic flow. The Environmental Impact Statement aims to look at reasonable alternatives and identify many resources that will be affected by its implementation. Four main alternatives were considered: an underpass, an overpass with an elevator, an overpass with a ramp, and the no-change alternative to be used as a baseline alternative. The underpass is the preferred …

Quantifying The Role Of Karst Groundwater On Mountain River Discharge, Devon Hill

All Graduate Theses and Dissertations, Fall 2023 to Present

A primary objective of hydrological research is to anticipate the shifts in water supply due to climate change. These shifts are difficult to predict in karst areas like Logan Canyon because much of the water moves through large fractures and cave networks that transport groundwater quickly, but there are some groundwater fractions which move very slowly. Many studies in karst regions use spring dynamics to assess aquifer condition, but overlook other influences such as exchanges between a river and the underlying aquifer. In this study, we calculated the quantity and chemical makeup of these groundwater and surface water exchanges by …

Techniques To Overcome Energy Storage Limitations In Electric Vehicles, Matthew J. Hansen

All Graduate Theses and Dissertations, Fall 2023 to Present

Electric vehicles are becoming increasingly popular, battery limitations (cost, size, and weight) complicate electric vehicle adoption. While important research on battery development is ongoing, this dissertation discusses two main approaches to overcome those limitations within the existing battery technology paradigm. Those thrusts are: improving battery health through an optimal charging strategy and minimizing necessary battery size through dynamic wireless power transfer. In this dissertation, relevant literature is discussed, with opportunities for further development considered. Within the two thrusts, three objectives sharpen the focus of the research presented here. First, a planning tool is defined for a battery electric bus fleet. …

Investigating The Impact Of Pre-Professional Organization Participation On Undergraduate Technology And Engineering Education Student Retention And Interest In Teaching, Emily Yoshikawa-Ruesch

All Graduate Theses and Dissertations, Fall 2023 to Present

The field of Technology and Engineering Education (TEE) has evolved in name and content throughout its existence. Throughout these evolutions, the number of TEE programs across the United States have decreased along with a decrease in the number of students graduating from undergraduate TEE programs. Previous investigations into the recruitment of TEE students have identified social interactions with TEE program faculty and technology and engineering educators as influential in students' interest in teaching technology and engineering at the secondary level. This study sought to investigate how social interactions through participation in Technology and Engineering Educators Association (TEECA), as a community …

Oxider To Fuel Ratio Shift Compensation Via Vortex Strength Control In Hybrid Rocket Motors, Max W. Francom

All Graduate Theses and Dissertations, Fall 2023 to Present

Hybrid motors have existed as a hypothetical propulsion system for decades in a wide range of upper stage rocket motors due to their simple, robust, non-toxic, and versatile nature. However, inherent to hybrids is Oxidizer to Fuel ratio (O/F) shift over time, which results in performance losses for the majority of the rocket’s lifetime. The purpose of this study is to develop a hybrid rocket motor capable of manipulating O/F at will, resulting in an engine which eliminates the undesirable effects of O/F shift. By developing and refining a numerical simulation, a novel injector system, and an open-loop control scheme, …

Development, Modeling, Identification, And Control Of Tilt-Rotor Evtol Aircraft, Clayton T. Spencer

All Graduate Theses and Dissertations, Fall 2023 to Present

This thesis includes the development, modeling, identification, and control of an electric-Vertical-Take-Off-and-Landing (eVTOL) aircraft with tiltable rotors. The front two rotors have tilting capability for transition flight from vertical-take-off to forward-level flight. This work details the development of an eVTOL aircraft and the selection of sub components such as electric motors, batteries, and controllers. After the aircraft build, mathematical model is derived to describe the motion of the aircraft. Unknown parameters in the mathematical model are identified using a Least-Squares-regression (LSR) method that can handle parameter constraints. This is done using real flight data collected from the aircraft. Lastly, this …

Evaluating 1d And 2d Small-Strain Ground Response Analyses At The I-15 Downhole Array Using Recorded Aftershocks From The M5.7 2020 Magna, Utah Earthquake, Tyler S. Jackson

All Graduate Theses and Dissertations, Fall 2023 to Present

As earthquake waves exit rock and travel up through softer subsurface strata on their way to the surface, the intensity of ground shaking is significantly influenced by the subsurface soil layering and often increases in areas with deeper, softer soil deposits. The soft soils present in Utah’s valleys, deposited during the era of Lake Bonneville, tend to amplify the energy and intensity of ground motion felt by people and structures alike. Thus, the first step to designing earthquake resilient infrastructure in Utah is understanding how the subsurface soil layers amplify and/or attenuate ground motions induced by an earthquake. Methods used …

Design And Implementation Of An Accelerated Lifetime Testing Platform For Silicon Carbide Mosfets, Conner Deppe

All Graduate Theses and Dissertations, Fall 2023 to Present

In the last several years, the United States has seen a significant increase in sales of electric vehicles. The increase of electric vehicles brings the need for increased availability of public charging stations. In the last two years, satisfaction levels for public chargers have fallen significantly due to unreliability, which is raising concerns for new potential electric vehicle owners. To mitigate the reliability concerns, chargers must be physically understood so they can be consistently monitored to assess their health status. To understand the electric vehicle charging reliability, electrical components must first be understood. In the cutting-edge charging technology, the relatively …

Mechanical Properties And Microstructure Of Multi-Materials Fabricated Through A Combination Of Lpbf And Ded Additive Manufacturing Techniques, Christopher J. Bettencourt

All Graduate Theses and Dissertations, Fall 2023 to Present

This research explores the use of different metals combined through 3D-printing to enhance the performance of materials, with a focus on making heat exchangers more cost-effective for renewable energy. The goal is to replace a costly high-temperature alloy with a more affordable low-temperature alloy, using metal additive manufacturing for its benefits such as less material waste, faster production, reduced weight, and the ability to print entire assemblies in one go. The study delves into a unique combination of two 3D-printing techniques, Directed Energy Deposition and Laser Powder-Bed Fusion, to create a multi-material composed of stainless steel 316L and a nickel-based …

Tracking Perfluoroalkyl Substances From Wastewater Influent To Its Accumulation In Vegetables And Forage Grass, Simon Kozik

All Graduate Theses and Dissertations, Fall 2023 to Present

Per and poly-fluorinated alkyl substances (PFAS) are a class of chemicals that are persistent in the environment. PFAS was found in wastewater, which can be used after wastewater treatment for irrigation water, and in the biosolids that can be mixed with soils to provide nutrients and generally improve soil quality. This study found when wastewater was used it increases the level of PFAS in vegetables and forage grass. PFAS concentrations were tracked from the influent of the wastewater treatment plant to the effluent, to the irrigation water, to the soil, and finally into the vegetable and forage grass grown on …

Development And Testing Of An 8-Bit Digitally Throttled Hybrid Rocket Motor, Trevor W. Coombs

All Graduate Theses and Dissertations, Fall 2023 to Present

Hybrid rocket motors that use a solid fuel grain and liquid oxidizer are low-cost and safer alternatives to traditional rocket motors. Another benefit of hybrid rocket motors is that during a burn, the amount of oxidizer into the combustion chamber can be changed, this capability is called throttling. To take advantage of the throttling ability of hybrid rocket motors, a throttling valve made up of 8 individually controlled valves is designed, developed, and tested, which is documented in this thesis. The results of the testing campaign show that the 8-bit digital throttling valve technology is an effective throttling technology and …

Exploring The Role Of Near Channel Geospatial Attributes To Predict Suspended Sediment Concentration Patterns Across The Conus Region, Aaron J. Sigman

All Graduate Theses and Dissertations, Fall 2023 to Present

High concentrations of suspended sediment (SSC) in a river can represent a critical water quality concern, reduce the storage capacity of reservoirs, and impact aquatic habitat. The total amount of sediment is calculated from a combination of river properties, including the amount of available sediment and the flow of water carrying the sediment. Water flow properties can be found using local information about the channel, however understanding the concentration of sediment in the river requires understanding the supply of sediment from the watershed. To understand where sediment is coming from, we examined over 1000 United States Geological Survey sites with …

Advancing Near Surface Soil Moisture Measurements Using Robotics, Automation, And Remote Sensing, Hemanth Narayan Dakshinamurthy

All Graduate Theses and Dissertations, Fall 2023 to Present

Near-surface soil moisture, or the water content within the soil, is important for understanding the interactions between land and the atmosphere, and for monitoring plants in agricultural settings. However, soil moisture can be highly variable within the same field and varies considerably with time. The challenge involved with measuring soil moisture is that traditional techniques that rely on obtaining large samples are labor and time-intensive, especially for large fields. Developments in sensor technologies have allowed users to record the soil moisture regularly at the points where the sensors are installed. However, to understand how soil moisture changes across a field …

Field Flow Measurements For Pipe Installations With Non-Ideal Conditions, Jake Douglas

All Graduate Theses and Dissertations, Fall 2023 to Present

Accurate flow measurement data is necessary to effectively manage water resources. The purpose of this research is to investigate options to improve field flow measurement by investigating alternatives for calibrating flow meters installed in non-ideal piping. Typically, to accurately measure a flow rate using most types of flow meters, it is recommended that a straight section of pipe be installed immediately upstream and downstream of the flow meter to avoid flow fluctuations at the meter location. However, in many cases, flow disturbances upstream of the meter are unavoidable.

The performance of field flow measurements in non-ideal piping scenarios were studied …

Uv-A Light: A Novel Method For Food Dehydration, Mckade S. Roberts

All Graduate Theses and Dissertations, Fall 2023 to Present

Dehydration is one of the most prevalent forms of food preservation, with approximately 85% of food is hot air drying due to the simplicity of the process. The high temperatures employed in this method may also induce a loss in nutritional quality, which involves destruction of micronutrients (vitamins), and loss of color.

The aim of this work is to develop a low energy, non-thermal method of food dehydration that results in a high-quality product through the application of Ultraviolet light, within the UV-A range. UV light can be separated into its 3 categories based on the wavelength of light from …

Water Data Science: Data Driven Techniques, Training, And Tools For Improved Management Of High Frequency Water Resources Data, Amber Spackman Jones

All Graduate Theses and Dissertations, Fall 2023 to Present

Electronic sensors can measure water and climate conditions at high frequency and generate large quantities of observed data. This work addresses data management challenges associated with the volume and complexity of high frequency water data. We developed techniques for automatically reviewing data, created materials for training water data managers, and explored existing and emerging technologies for sensor data management.

Data collected by sensors often include errors due to sensor failure or environmental conditions that need to be removed, labeled, or corrected before the data can be used for analysis. Manual review and correction of these data can be tedious and …

Understanding Peer Interactions In Undergraduate Engineering Education, Jack C. Elliott

All Graduate Theses and Dissertations, Fall 2023 to Present

Whether they occur inside or outside the classroom, social interactions between undergraduate students play a key role in student success. As a result, engineering education researchers have sought to understand why students interact with certain peers, and which types of interactions relate to positive student outcomes. While existing studies show promising results for formal group assignments, most have been conducted in a single undergraduate course. Because important student interactions occur outside and inside courses, more research is needed to fully understand (a) why students choose to, or not to, interact with other students, and (b) how these interactions relate to …

Multifidelity Comparison Of Supersonic Wave Drag Prediction Methods Using Axisymmetric Bodies †, Troy Abraham, David Lazzara, Douglas Hunsaker

Mechanical and Aerospace Engineering Student Publications and Presentations

Low-fidelity analytic and computational wave drag prediction methods assume linear aerodynamics and small perturbations to the flow. Hence, these methods are typically accurate for only very slender geometries. The present work assesses the accuracy of these methods relative to high-fidelity Euler, compressible computational-fluid-dynamics solutions for a set of axisymmetric geometries with varying radius-to-length ratios (R/L). Grid-resolution studies are included for all computational results to ensure grid-resolved results. Results show that the low-fidelity analytic and computational methods match the Euler CFD predictions to around a single drag count (~1.0 × 10^–4) for geometries with R/L ≤ 0.05 …