Engineering Commons^™

A Collection Of New Studies Using Existing And Proposed Techniques And Instrumentation For Nondestructive Testing And Analysis Of Concrete Materials And Structures, Shane D. Boone

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A variety of studies were performed using existing and newly proposed techniques and instrumentation to further the understanding of nondestructive testing of concrete. A new combined stress wave propagation method was developed that combined the existing methods of the spectral analysis of surface waves, impact echo, and free-free resonant column experimental and analysis techniques. The method was used to determine the stiffness profile and location of embedded voids in a concrete tunnel lining modeled as a three layer concrete slab. A new equation was proposed that predicted the level of damage of concrete samples based on the functions of the …

Bridge Instrumentation And The Development Of Non-Destructive And Destructive Techniques Used To Estimate Residual Tendon Stress In Prestressed Girders, Brian Michael Kukay

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This research embodied a three-prong approach for directly determining the residual prestress force of prestressed concrete bridge girders. For bridges that have yet to be constructed, outfitting girders with instrumentation is a highly effective means of determining residual prestress force in prestressed concrete bridge girders. This constitutes the first prong. Still, many bridges are constructed without such instrumentation. For these bridges, a destructive technique can be used to directly determine the residual prestress in a prestressed concrete bridge girder. This implies that the girder(s) being tested have already been taken out of service. This constitutes the second prong.

For bridges …

Models And Algorithms For Addressing Travel Time Variability: Applications From Optimal Path Finding And Traffic Equilibrium Problems, Zhong Zhou

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

An optimal path finding problem and a traffic equilibrium problem are two important, fundamental, and interrelated topics in the transportation research field. Under travel time variability, the road networks are considered as stochastic, where the link travel times are treated as random variables with known probability density functions. By considering the effect of travel time variability and corresponding risk-taking behavior of the travelers, this dissertation proposes models and algorithms for addressing travel time variability with applications from optimal path finding and traffic equilibrium problems. Specifically, two new optimal path finding models and two novel traffic equilibrium models are proposed in …

Algorithm Development For Column Water Vapor Retrieval Using The Sun And Aureole Measurement (Sam) Sensor, Joshua Bruce Williams

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

To understand and model the energetics of the Sun-Earth connection, measurements of specific atmospheric molecules are beneficial. The objective is to formulate an algorithm to derive temporally varying atmospheric water vapor concentrations as functions of altitude, latitude, and longitude from solar irradiance absorption measurements. The Visidyne SAM (Sun and Aureole Measurement) instrument, which studies the size and distribution of cloud particles, was used to obtain the experimental data. By introducing a spectrometer to the SAM instrument, column water vapor is produced as part of the data product. A new model optimized algorithm is developed and tested versus existing algorithms. Through …

Distributed Hydrologic Modeling For Streamflow Prediction At Ungauged Basins, Christina Bandaragoda

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Hydrologic modeling and streamflow prediction of ungauged basins is an unsolved scientific problem as well as a policy-relevant science theme emerging as a major challenge to the hydrologic community. One way to address this problem is to improve hydrologic modeling capability through the use of spatial data and spatially distributed physically based models. This dissertation is composed of three papers focused on 1) the use of spatially distributed hydrologic models with spatially distributed precipitation inputs, 2) advanced multi-objective calibration techniques that estimate parameter uncertainty and use stream gauge and temperature data from multiple locations, and 3) an examination of the …

Calculated Surface Velocity Coefficients For Prismatic Open Channels By Three-Dimensional Hydraulic Modeling, Nat Marjang

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A turbulence model was developed for computing surface velocity coefficients and discharge under steady, uniform flow conditions for rectangular and compound open-channel cross sections. Reynolds-Average Navier-Stokes (RANS) equations, Reynolds stress equations, and kinetic energy and dissipation equations were applied in the model using the finite-volume method with the SIMPLER algorithm. The models show graphical results of the velocity distributions in the longitudinal bed slope direction, secondary velocities, pressure, turbulence kinetic energy, and kinetic energy dissipation rate across the cross section. Also, the surface velocity coefficients were computed at increments of one-eighth of the base width from the vertical walls to …

Optimization Model For National Water Master Planning: Design And Documentation, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

Physical distribution system and Balancing and Allocation and Transfer modules descriptors.

Active And Attentive Ladar Scanning For Automatic Target Recognition, M. Mamanakis, R.R. Fullmer, R.T. Pack, Scott E. Budge

Electrical and Computer Engineering Faculty Publications

In this work we examine the dynamic implications of active and attentive scanning for LADAR based automatic target/object recognition and show that a dynamically constrained, scanner based, ATR system's ability to identify objects in real-time is improved through attentive scanning. By actively and attentively scanning only salient regions of an image at the density required for recognition, the amount of time it takes to find a target object in a random scene is reduced. A LADAR scanner's attention is guided by identifying areas-of-interest using a visual saliency algorithm on electro-optical images of a scene to be scanned. Identified areas-of-interest are …

Estimating The Subsonic Aerodynamic Center And Moment Components For Swept Wings, W. F. Phillips, Doug F. Hunsaker, R. J. Niewoehner

Mechanical and Aerospace Engineering Faculty Publications

An improved method is presented for estimating the subsonic location of the semispan aerodynamic center of a swept wing and the aerodynamic moment components about that aerodynamic center. The method applies to wings with constant linear taper and constant quarter-chord sweep. The results of a computational fluid dynamics study for 236 wings show that the position of the semispan aerodynamic center of a wing depends primarily on aspect ratio, taper ratio, and quarter-chord sweep angle. Wing aspect ratio was varied from 4.0 to 20, taper ratios from 0.25 to 1.0 were investigated, quarter-chord sweep angles were varied from 0 to …

Photoelectric Charging By Ultraviolet Light Of A Lunar Dust Simulant In A Microgravity Environment, Microgravity Research Team 2008

Reports and Proposals

No abstract provided.

Impact Of Mentorship Programs On African-American Male High School Students’ Perception Of Engineering, Cameron De'leon Denson

Dissertations

The purpose of this study was to examine the impact of mentorship programs on African-American male high school students’ perceptions of engineering. In this study, indicators of students’ perceptions included students’ perceptions of engineering, their self-efficacy in the area of math, and their self-efficacy in the area of science. This study used a two-group, posttest only, experimental design with randomly selected participants. A survey was used to collect data from 20 participants attending the Middle College at A&T. Using an independent t-test to determine a difference of statistical significance, inferential statistics were provided to answer the following research questions; (a) …

Resources: Staying In Touch - Gone Global, Todd R. Kelley

Publications

The article highlights two classroom activities that help classrooms communicate globally using communication technologies. They include the pen-pal/classroom exchange program and the online exchange program using web cams and videoconferencing. Moreover, it discusses how the cited communication technologies enhance learning as well as the challenges inherent in using them in a classroom setting.

Join The Mission, Design A Patch, Nathan Mentzer, Fay Mentzer, Krista Jones

Publications

The article presents a classroom activity designed for third grade and up that requires students to design their own mission patch. The activity references the patches developed and designed by the U.S. National Aeronautics & Space Administration. Moreover, the article discusses the design of the activity, the available resources, the evaluation process and interdisciplinary connections.

Design Activity: Students Designing Their Own Video Games, Steve Shumway

Publications

The article presents a school activity helping students to design their own computer video games. In the past, advanced programming using Java or C++ was used to design video games. At present, there are many free, easy-to-use software programs available to help elementary-age children create their own video games. The article suggests that teachers download a free version of this software and begin the tutorial.

Cognitive Processes Of Students Participating In Engineering-Focused Design Instruction, Todd R. Kelley

Publications

Since the publication of the Standards for Technological Literacy in 2000 (ITEA), there have been a number of new programs developed that are designed to teach pre-engineering. Project Lead the Way is one such program. Project Lead the Way boasts serving over 1250 schools in 44 states and teaching over 160,000 students (McVearry, 2003). Efforts are also being made to infuse engineering design into technology education programs. One example of this is the work of the National Center for Engineering and Technology Education (NCETE) partnering with high school technology educators in summer inservice workshops to help teachers develop activities and …

Infrastructure Economics - University Of California, Davis, Jay R. Lund

All ECSTATIC Materials

Graduate course in infrastructure economics offered at University of California, Davis in Winter 2008

Analogical Reasoning In The Engineering Design Process And Technology Education Applications, Jenny Daugherty, Nathan Mentzer

Publications

This synthesis paper discusses the research exploring analogical reasoning, the role of analogies in the engineering design process, and educational applications for analogical reasoning. Researchers have discovered that analogical reasoning is often a fundamental cognitive tool in design problem solving. Regarding the possible role of analogical reasoning in the context of technology education; analogies may be a useful tool to develop student’s design skills, teach abstract or complex concepts, and build students’ analogical reasoning skills for general problem solving. The positive and negative educational implications of analogical reasoning being explored by researchers are also discussed.