Engineering Commons^™

A Theoretical Framework To Guide The Re-Engineering Of Technology Education, Todd R. Kelley, Nadia Kellam

Publications

Before leaders in technology education are able to identify a theoretical framework upon which a curriculum is to stand, they must first grapple with two opposing views of the purpose of technology education – education for all learners or career/technical education. Dakers (2006) identifies two opposing philosophies that can serve as a framework for technology education, both inspired by ancient Greece, with the works of Descartes and the birth of positivism. Later reappearing in Pascal’s writings of the mathematical mind, and finally with Rousseau in the mid 1700s, the theoretical arguments of academic verses vocational were established in education, and …

Integrating Engineering Design Into Technology Education: Georgia's Perspective, Cameron Denson, Todd Kelley, Robert C. Wicklein

Publications

This descriptive research study reported on Georgia’s secondary level (grades 6-12) technology education programs capability to incorporate engineering concepts and/or engineering design into their curriculum. Participants were middle school and high school teachers in the state of Georgia who currently teach technology education. Participants completed a Likert-type online-survey which reported on technology education teacher’s (a) current instructional practices to teach engineering-based instruction, (b) curricular value placed on engineering-based instruction, and (c) instructional needs to teach engineering-based topics. General demographic information was collected from all participants. The results from the study aided in informing the educational community on the perspective of …

Engineering Design Activity: Understanding How Different Design Activities Influence Students' Motivation In Grades 9-12, Oenardi Lawanto, Gary Stewardson

Reports of Center Studies

The objective of this study was to evaluate grade 9-12 students’ motivation while engaged in two different engineering design projects: marble-sorter and bridge designs. The motivation components measured in this study were focused on students’ intrinsic (IGO) and extrinsic (EGO) goal orientations, task value (TV), self-efficacy for learning and performance (SELP), and control belief (CB). After finishing each project, students were asked to complete an Engineering Design Questionnaire (EDQ) survey instrument. The instrument consisted of 26 items modified from motivational scales of the Motivated Strategies for Learning Questionnaire (MSLQ).Besides the motivational scales, five demographic and two open-ended questions exploring students’ …

Learning Effects And Attitudes Of Design Strategies On High School Students, Robert Wicklein, John Mativo

Reports of Center Studies

The purpose of this research project was to use an experimental design research methodology to compare learning and attitudinal effects of two different design instructional strategies on randomly selected and assigned 11th and 12th grade students. Through the use of a common technological based problem (see Appendix A), students were guided through a design sequence that utilized two different instructional approaches (a) predictive analysis and (b) trial & error. At the completion of a five-day (15 hour) learning activity a standardized engineering design test was administered to the students to evaluate differences in engineering design capabilities. Additionally, students completed an …

A Case Study Of The Implementation Of An Engineering Program Into A High School Technology Education Classroom, Steven Shumway, Geoff Wright

Reports of Center Studies

Using a case study format, our objective was to collect data related to the following research questions:

- What criteria do teachers and districts use when selecting engineering design experiences for infusion into high school classes and which of these criteria are most effective?

- What issues, opportunities, and constraints do teachers confront as they infuse engineering concepts into technology education?

Rembrant: Research On The Effects Of Microgravity On The Brazil Nut Problem, Getaway Special Team 2009

Reports and Proposals

No abstract provided.

The Nature And Status Of Stem Professional Development: Effective Practices For Secondary Level Engineering Education, Rodney L. Custer, Jenny L. Daugherty

Reports of Center Studies

Recently engineering has emerged on the K-12 scene as a potentially important content area. However, K-12 teachers typically lack sufficient backgrounds to effectively integrate engineering into their classrooms. Thus teacher professional development is of critical importance. Although there have been several initiatives emerge to assist teachers in teaching engineering-related curriculum, there has been little empirical research generated. For example, little is known about best practices, engineering pedagogical content knowledge, or effective design principles for engineering professional development. Although there is a general consensus in the literature concerning a set of principles that differentiate effective teacher professional development (i.e., Garet, Porter, …

Teacher Challenges To Implement Engineering Design In Secondary Technology Education (Part 3), Todd R. Kelley, Robert C. Wicklein

Publications

This descriptive study examined the current status of technology education teacher practices with respect to engineering design. This article is the third article in a three-part series presenting the results of this study. The first article in the series titled Examination of Engineering Design Curriculum Content highlighted the research findings regarding engineering design curriculum content delivered by technology education teachers. The second article in the series titled Examination of Assessment Practices for Engineering Design Projects in Secondary Technology Education reported technology education teachers’ assessment practices when implementing engineering design projects in the classroom. The sample for this study was drawn …

Examination Of Assessment Practices For Engineering Design Projects In Secondary Education (Part 1), Todd R. Kelley, Robert C. Wicklein

Publications

The following descriptive study was designed to determine the national status of secondary technology education curriculum content and assessment practices as they relate to engineering design. The results of this study were divided into a three-part article series. Although this study focused on the larger construct of the national status of the infusion of engineering design into technology education, three separate sub-constructs emerged. The three sub-constructs were: a) status of engineering design curriculum content; b) the status of assessment practices of engineering design projects, and c) what selected challenges are identified by secondary technology educators in teaching engineering design.

Using Engineering Cases In Technology Education, Todd R. Kelley

Publications

The article discusses issues related to the use of engineering case studies in technology education in K-12 classrooms. Experts from K-12 education, universities, industry and U.S. government officials came to an agreement on the need to implement engineering in K-12 schools. In relation to the proposed use of engineering case studies in technology education, several definitions of the term "design case studies." The presentation of cases using multimedia formats is also cited as a powerful format of engineering design cases.

Motivation While Designing In Engineering And Technology Education Impacted By Academic Preparation, Nathan Mentzer, Kurt Becker

Publications

The purpose of this study was to determine if high school students’ academic preparation was correlated with change in motivation during an engineering design challenge. The research was conducted in a high school classroom in which elements of engineering design were taught in a technology education context to eleventh-grade student from diverse academic backgrounds (measured by grade point average [GPA]). Participant motivation was assessed by the California Measure of Mental Motivation (CM3). The CM3 measures student motivation to apply critical thinking skills and reasoning to solve problems in five subscales: mental focus, learning orientation, creative problem solving, cognitive integrity, and …

Aglite Lidar: A Portable Elastic Lidar System For Investivating Aerosol And Wind Motions At Or Around Agricultural Production Facilities, Christian C. Marchant, Thomas Wilkerson, Gail E. Bingham, Vladimir V. Zavyalov, Jan M. Andersen, Cordell B. Wright, Scott S. Cornelsen, Randy S. Martin, Philip J. Silva, Jerry L. Hatfield

Civil and Environmental Engineering Faculty Publications

The Aglite Lidar is a portable scanning lidar that can be quickly deployed at agricultural and other air quality study sites. The purpose of Aglite is to map the concentration of PM10 and PM2.5 in aerosol plumes from agricultural and other sources. Aglite uses a high-repetition rate low-pulse energy 3-wavelength YAG laser with photon-counting detection together with a steerable pointing mirror to measure aerosol concentration with high spatial and temporal resolution. Aglite has been used in field campaigns in Iowa, Utah and California. The instrument is described, and performance and lidar sensitivity data are presented. The value of the lidar …

A Novel Capacitance Sensor For Fireside Corrosion Measurement, Heng Ban, Zuoping Li

Mechanical and Aerospace Engineering Faculty Publications

Fireside corrosion in coal-fired power plants is a leading mechanism for boiler tube failures. Online monitoring of fireside corrosion can provide timely data to plant operators for mitigation implementation. This paper presents a novel sensor concept for measuring metal loss based on electrical capacitance. Laboratory-scale experiments demonstrated the feasibility of design, fabrication, and operation of the sensor. The fabrication of the prototype sensor involved sputtering deposition of a thin metal coating with varying thickness on a ceramic substrate. Corrosion metal loss resulted in a proportional decrease in electrical capacitance of the sensor. Laboratory experiments using a muffle furnace with an …

Shades Of Grey: A Critical Review Of Grey-Number Optimization, David E. Rosenberg

Civil and Environmental Engineering Faculty Publications

A grey number is an uncertain number with fixed lower and upper bounds but unknown distribution. Grey numbers find use in optimization to systematically and proactively incorporate uncertainties expressed as intervals plus communicate resulting stable, feasible ranges for the objective function and decision variables. This article critically reviews their use in linear and stochastic programs with recourse. It summarizes grey model formulation and solution algorithms. It advances multiple counter-examples that yield risk-prone grey solutions that perform worse than a worst-case analysis and do not span the stable feasible range of the decision space. The article suggests reasons for the poor …

Modeling Integrated Decisions For A Municipal Water System With Recourse And Uncertainties: Amman, Jordan, David E. Rosenberg, Jay Lund

Civil and Environmental Engineering Faculty Publications

Stochastic mixed-integer optimization is used to identify a portfolio of long- and short-term supply and conservation actions for a municipal water system to cost-effectively accommodate a distribution of water shortages. Alternative robust, grey-number, and best/worst case formulations systematically explore implications of uncertainties in action costs, life spans, water volumes gained or saved, shortage levels, and shortage probabilities. A detailed example for Amman, Jordan considers 23 potential actions. Results show: (1) remarkable consistency occurs across the different modeling approaches. (2) Conserving water—reducing leakage and targeting select customers to install water efficient appliances—plays an important and growing role over time. (3) A …

Creating Tomorrow, Fall 2008, College Of Engineering

College of Engineering Magazines

Annual magazine for the College of Engineering at Utah State University.

Application Of Structural Control For Civil Engineering Structures, Abdollah Shafieezadeh

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This study presents the application of control methods in seismic mitigation of structural responses. The study consists of two parts. In the first section, fractional order filters are utilized to enhance the performance of the conventional LQR method for optimal robust control of a simple civil structure. The introduced filters modify the state variables fed back to the constant gain controller. Four combinations of fractional order filter and LQR are considered and optimized based on a new performance criterion defined in the paper. Introducing fractional order filters is shown to improve the results considerably for both the artificially generated ground …

Gene Expression Analysis Of Immobilized Saccharomyces Cerevisiae, Ryan Michael Summers

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Immobilization is an effective method to increase ethanol production, as proven by previous research. Results almost exclusively demonstrate an increase in ethanol production by and decrease in reproduction rate of immobilized Saccharomyces cerevisiae cells. Recently, research has been conducted to determine the cause of this change. The extreme variance in results due to lack of technology makes it difficult to determine the cellular changes induced by immobilization. With the advent of new technology, specifically gene expression analysis, the RNA content of cells can be easily and rapidly analyzed.

S. cerevisiae cells were immobilized in 3% (w/v) calcium alginate beads and …

Rank-Data Distribution Method (R-D Method) For Daily Time-Series Bayesian Networks And Total Maximum Daily Load Estimation, Joon-Hee Lee

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Daily time series-based models are required to estimate the higher frequency fluctuations of nutrient loads and concentrations. Some mechanistic mathematical models can provide daily time series outputs of nutrient concentrations but it is difficult to incorporate non-numerical data, such as management scenarios, to mechanistic mathematical models. Bayesian networks (BNs) were designed to accept and process inputs of varied types of both numerical and non-numerical inputs.

A Rank-Data distribution method (R-D method) was developed to provide large time series of daily predicted flows and Total Phosphorus (TP) loads to BNs driving daily time series estimates of T-P concentrations into Hyrum and …

Measuring And Modeling Of Plant Root Uptake Of Organic Chemicals, Erik Dettenmaier

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Determining the root uptake of xenobiotic organic chemicals into plants is critical for assessing the human and ecological health risks associated with the consumption of plants growing in contaminated environments. Root uptake of xenobiotic organics occurs passively in conjunction with transpiration and the transport from root to shoot is ultimately controlled by passage through one or more lipid root membranes. The transpiration stream concentration factor (TSCF), the ratio between the concentration of a chemical in the xylem to that in the solution used by the roots, is used to describe the relative ability of an organic chemical to be passively …

Angles-Only Navigation For Autonomous Orbital Rendezvous, David Charles Woffinden

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The proposed thesis of this dissertation has both a practical element and theoretical component which aim to answer key questions related to the use of angles-only navigation for autonomous orbital rendezvous. The first and fundamental principle to this work argues that an angles-only navigation filter can determine the relative position and orientation (pose) between two spacecraft to perform the necessary maneuvers and close proximity operations for autonomous orbital rendezvous. Second, the implementation of angles-only navigation for on-orbit applications is looked upon with skeptical eyes because of its perceived limitation of determining the relative range between two vehicles. This assumed, yet …

Generalized Event Tree Algorithm And Software For Dam Safety Risk Analysis, Anurag Srivastava

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Event tree analysis is a most commonly used method in dam safety risk analysis modeling. Available software tools for performing event tree analyses lack the flexibility to efficiently address many important factors in dam safety risk analysis. As a result of these practical limitations, spreadsheets have been used, sometimes including Visual Basic macros, to perform these analyses. However, this approach lacks generality and can require significant effort to apply to a specific dam or to modify the event tree structure. In response to these limitations, here a generalized event tree analysis tool, DAMRAE (DAM safety Risk Analysis Engine), has been …

Hydrogen Production By Anaerobic Fermentation Using Agricultural And Food Processing Wastes Utilizing A Two-Stage Digestion System, Reese S. Thompson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Hydrogen production by means of anaerobic fermentation was researched utilizing three different substrates. Synthetic wastewater, dairy manure, and cheese whey were combined together at different concentrations under batch anaerobic conditions to determine the optimal hydrogen producing potential and waste treatment of each. Cheese whey at a concentration of 55% was combined with dairy manure at a concentration of 45% to produce 1.53 liters of hydrogen per liter of substrate. These results are significant because the control, synthetic wastewater, which was a glucose-based substrate, produced less hydrogen, 1.34 liters per liter of substrate, than the mixture of cheese whey and dairy …

Estimating Total Phosphorus And Total Suspended Solids Loads From High Frequency Data, Amber Spackman Jones

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Frequently measured turbidity was examined as a surrogate for total phosphorus (TP) and total suspended solids (TSS) loads at two locations in the Little Bear River, Utah, USA. Using regression techniques, equations were developed for TP and TSS as functions of turbidity. The equations accounted for censored data, and additional explanatory variables to represent hydrological conditions were considered for inclusion in the equations. By using the resulting surrogate relationships with high frequency turbidity measurements, high frequency estimates of TP and TSS concentrations were calculated. To examine the effect of sampling frequency, reference loads were determined from the concentration records for …

Fabrication Of Long-Fiber-Reinforced Metal Matrix Composites Using Ultrasonic Consolidation, Yanzhe Yang

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This research is a systematic study exploring a new fabrication methodology for long-fiber-reinforced metal matrix composites (MMCs) using a novel additive manufacturing technology. The research is devoted to the manufacture of long-fiber-reinforced MMC structures using the Ultrasonic Consolidation (UC) process. The main objectives of this research are to investigate the bond formation mechanisms and fiber embedment mechanisms during UC, and further to study the effects of processing parameters on bond formation and fiber embedment, and the resultant macroscopic mechanical properties of UC-made MMC structures.

From a fundamental research point of view, bond formation mechanisms and fiber embedment mechanisms have been …

A Three-Dimensional, Time-Dependent Circulation Model Of Utah Lake, Eric V. Callister

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Spatial and temporal variations of Utah Lake’s flow field were modeled using the Estuary Lake and Computer Model from the Centre for Water Research (CWR-ELCOM) at the University of Western Australia as part of an effort to increase understanding of the lake’s natural processes in order to restore the lake to its pristine, clear-water state and preserve the habitat of the June sucker, an endangered species. The model was validated using temperature measurements taken by sensors in 2007. The water temperature was a strong function of air temperature and incident short wave radiation, and was influenced to a lesser degree …

Identification Of Chlorinated Solvent Sources In The Indoor Air Of Private Residences Around Hill Air Force Base, Utah, Andrew Jensen Hall

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Volatile chlorinated solvents such as trichloroethylene (TCE), 1,2 dichloroethane (1,2 DCA), and perchloroethylene (PCE) have been identified in the indoor air of residences located near Hill Air Force Base (AFB), Utah. These vapors can originate from either volatilization of contaminates from shallow contaminated groundwater and transport into residences or from sources within the residence. The focus of the thesis was the development of a testing strategy for determining sources of TCE, 1,2 DCA, and PCE in the indoor air of residences near Hill AFB.

Eight residences were selected for this study by Hill AFB based on prior detections of TCE, …

Evaluation Of Arrayed-Field Concentration Measurements And U. S. Epa-Regulatory Models For The Determination Of Mixed-Source Particulate Matter Emissions, Derek Jones

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

With the continued population growth and the blurring of the urban and rural interface, air quality impacts associated with agricultural particle-producing processes are becoming increasingly important. There is a lack of emission rate data from these source types and no prescribed measurement technique available to the agricultural and regulatory communities. One technique that has shown promise is combining field measurements with inverse modeling. This approach was used herein to examine particulate emissions from an almond harvesting operation, a cotton ginning facility, and comparative emissions from conservation versus conventional tillage practices. EPAapproved models ISCST3 and AERMOD were used with AirMetrics samplers. …

Experiments In Distributed Multi-Robot Coordination, Larry Dale Ballard

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Consensus control algorithms for multi-agent systems are an area of much research. Several consensus control laws are experimentally validated on a multi-robot testbed in this thesis. A graphical user interface (GUI) is developed that simplies use of the testbed, as well as allows the execution of the testbed programs to be divided across multiple computers. This not only provides a more powerful computing environment, but a more realistic communication environment for the testbed. A method for a time varying or dynamic formation is both proposed and experimentally validated on the testbed. This research also explores a method for dynamic group …

Effective Practices Of Project Lead The Way Partnership Teams, Cody J. Reutzel

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this study was to gather information from Project Lead The Way (PLTW) partnership team experts. This project follows the methodology of a modified Delphi study. A review of literature in the areas of curriculum development, pre-college engineering, and the Delphi research technique provided the background for the structure utilized. Top programs from across the country were questioned to identify and come to a consensus on top components essential to developing and utilizing a successful PLTW partnership team. The components were categorized into two lists: effective practices utilized to make a program successful and effective practices employed by …