Engineering Commons^™

Development Of Curriculum Resources For Introducing Wind Power Into Technology And Engineering Education Programs, Andrew G. Swapp

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

In this world of political unrest; in these times of climate change; in this world of high prices and foreign dependence, energy is of great importance to our modern society. How we get our energy is of timely importance. Energy independence and keeping our air clean is of national vital interest. Wind energy has withstood the litmus test of politics and economics and is now the fastest growing form of energy development in the world today. Wind energy has proven over time and with many technological advances to be an economically viable and clean resource.

Bayesian Data-Driven Models For Irrigation Water Management, Alfonso F. Torres-Rua

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A crucial decision in the real-time management of today’s irrigation systems involves the coordination of diversions and delivery of water to croplands. Since most irrigation systems experience significant lags between when water is diverted and when it should be delivered, an important technical innovation in the next few years will involve improvements in short-term irrigation demand forecasting.

The main objective of the researches presented was the development of these critically important models: (1) potential evapotranspiration forecasting; (2) hydraulic model error correction; and (3) estimation of aggregate water demands. These tools are based on statistical machine learning or data-driven modeling. These, …

Experimental Testing Of The Accuracy Of Attitude Determination Solutions For A Spin-Stabilized Spacecraft, Keegan P. Ryan

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Spin-stabilized spacecraft generally rely on sun and three-axis magnetic field sensor measurements for attitude determination. This study experimentally determines the total accuracy of attitude determination solutions using modest quality sensors. This was ac- complished by having a test spacecraft collect data during spinning motions. The data was then post-processed to find the attitude estimates, which were then compared to the experimentally measured attitude. This same approach will be used to test the accuracy of the attitude determination system of the DICE spacecraft to be built by SDL/USU.

A Two-Dimensional Numerical Simulation Of Plasma Wake Structure Around A Cubesat, Rajendra Mitharwal

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A numerical model was developed to understand the time evolution of a wake structure around a CubeSat moving in a plasma with transonic speed. A cubeSat operates in the F2 layer of ionosphere with an altitude of 300 − 600 Km. The average plasma density varies between 10⁻⁶cm⁻³ − 10⁻⁹cm⁻³ and the temperature of ions and electrons is found between 0.1−0.2 eV. The study of a wake structure can provide insights for its effects on the measurements obtained from space instruments. The CubeSat is modeled to have a metal surface, which is a realistic …

Document Flash Thermography, Cory A. Larsen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis presents the application of ash thermography techniques to the analysis of documents. The motivation for this research is to develop the ability to non-destructively reveal covered writings in archaeological artifacts such as the Codex Selden or Egyptian car- tonnage. Current common signal processing techniques are evaluated for their effectiveness in enhancing subsurface writings found within a set of test documents. These processing techniques include: false colorization, contrast stretching, histogram equalization, median altering, Gaussian low-pass altering, layered signal reconstruction and thermal signal reconstruction (TSR), several contrast image definitions, differential absolute contrast (DAC), correlated contrast, derivative images, principal component thermography …

Structural Identification And Damage Identification Using Output-Only Vibration Measurements, Shutao Xing

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This dissertation studied the structural identification and damage detection of civil engineering structures. Several issues regarding structural health monitoring were addressed.

The data-driven subspace identification algorithm was investigated for modal identification of bridges using output-only data. This algorithm was tested through a numerical truss bridge with abrupt damage as well as a real concrete highway bridge with actual measurements. Stabilization diagrams were used to analyze the identified results and determine the modal characteristics. The identification results showed that this identification method is quite effective and accurate.

The influence of temperature fluctuation on the frequencies of a highway concrete bridge was …

Zeolite‐Based Algae Biofilm Rotating Photobioreactor For Algae And Biomass Production, Ashton M. Young

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Alkaline conditions induced by algae growth in wastewater stabilization ponds create deprotonated ammonium ions that result in ammonia gas (NH₃) volatilization. If algae are utilized to remediate wastewater through uptake of phosphorus, the resulting nitrogen loss will hinder this process because algae generally require a stoichiometric molar ratio of N₁₆P₁. Lower ratios of N/P due to loss of ammonia gas will limit the growth and yield of algae, and therefore will reduce phosphorus removal from the water phase into the algae phase. In order to reduce nitrogen loss through volatilization, an ammonium selective zeolite, …

Cognitive Formation Flight In Multi-Unmanned Aerial Vehicle-Based Personal Remote Sensing Systems, Long Di

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This work introduces a design and implementation of using multiple unmanned aerial vehicles (UAVs) to achieve cooperative formation flight based on the personal remote sensing platforms developed by the author and the colleagues in the Center for Self-Organizing and Intelligent Systems (CSOIS). The main research objective is to simulate the multiple UAV system, design a multi-agent controller to achieve simulated formation flight with formation reconfiguration and real-time controller tuning functions, implement the control system on actual UAV platforms and demonstrate the control strategy and various formation scenarios in practical flight tests. Research combines analysis on flight control stabilities, develop- ment …

Low-Thrust Assisted Angles-Only Navigation, Robert W. Gillis

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Tradition spacecraft proximity operations require large and expensive on-board sensors and significant ground support. Relative angle measurements can be obtained from small, simple, and inexpensive on-board sensors, but have not traditionally been used for proximity operation because of difficulty generating rang information. In this thesis it is shown that useful relative range data can be generated provided that the spacecraft is experiencing a small continuous thrust such as would be provided by a low-thrust propulsion system. In previous work range observability was shown with impulsive maneuvers. This thesis will expand this work to low-thrust spacecraft and will show how range …

Discharge Coefficients Of Oblique Weirs, Samuel Egnew Tingey

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Oblique weirs are those weirs placed at an angle with respect to the channel centerline. They can be used in canal applications where more discharge is needed, but there is limited freeboard. The discharge coefficients were determined for 54 different weirs by measuring total head for various flows over each weir. These weirs included sharp, half round and quarter-round-crested weirs. There were 18 weirs for each crest shape with three weir heights for each angle tested. The oblique angles tested were 10°, 15°, 25°, 45°, 60°, and 90° with respect to the channel centerline, with the nominal weir heights being …

Dislocation Density-Based Finite Element Method Modeling Of Ultrasonic Consolidation, Deepankar Pal

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A dislocation density-based constitutive model has been developed and implemented into a crystal plasticity quasi-static finite element framework. This approach captures the statistical evolution of dislocation structures and grain fragmentation at the bonding interface when sufficient boundary conditions pertaining to the Ultrasonic Consolidation (UC) process are prescribed.

The hardening is incorporated using statistically stored and geometrically necessary dislocation densities (SSDs and GNDs), which are dislocation analogs of isotropic and kinematic hardening, respectively. Since the macroscopic global boundary conditions during UC involves cyclic sinosuidal simple shear loading along with constant normal pressure, the cross slip mechanism has been included in the …

A Thermomechanical Analysis Of An Ultrasonic Bonding Mechanism, Chunbo Zhang

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A systematic experimental and numerical combined study of the thermomechanical bonding mechanisms in the ultrasonic welding (UW) process was conducted. A fully coupled thermomechanical finite element model has been built to fully understand the evolution and coupling between the in-process thermomechanical variables. The severe, localized, plastic deformation at the bond region is believed to be the major phenomenon for bond formation in ultrasonic welding. The influences of substrate dimensions on bond formation were studied and explained with an analytical vibration model. The formation of banded and cyclic stress-strain maxima in the substrate was found to be caused by superposition of …

Autonomous Aerial Manipulation Using A Quadrotor, Vaibhav Ghadiok

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This paper presents an implementation of autonomous indoor aerial gripping using a low-cost, custom-built quadrotor. Such research extends the typical functionality of micro air vehicles (MAV) from passive observation and sensing to dynamic interaction with the environment. To achieve this, three major challenges are overcome: precise positioning, sensing and manipulation of the object, and stabilization in the presence of disturbance due to interaction with the object. Navigation in both indoor and outdoor unstructured, Global Positioning System-denied (GPS-denied) environments is achieved using a visual Simultaneous Localization and Mapping (SLAM) algorithm that relies on an onboard monocular camera. A secondary camera, capable …

Estimating Yield Of Irrigated Potatoes Using Aerial And Satellite Remote Sensing, Saravanan Sivarajan

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Multispectral aerial and satellite remote sensing plays a major role in crop yield prediction due to its ability to detect crop growth conditions on spatial and temporal scales in a cost effective manner. Many empirical relationships have been established in the past between spectral vegetation indices and leaf area index, fractional ground cover, and crop growth rates for different crops through ground sampling. Remote sensing-based vegetation index (VI) yield models using airborne and satellite data have been developed only for grain crops like barley, corn, wheat, and sorghum. So it becomes important to validate and extend the VI-based model for …

Astro Camp Presentation, Get Away Special Team 2011

Education and Outreach

No abstract provided.

Automatic Merging Of Lidar Point-Clouds Using Data From Low-Cost Gps/Imu Systems, Scott E. Budge, K. Von Niederhausern

Electrical and Computer Engineering Faculty Publications

Stationary lidar (Light Detection and Ranging) systems are often used to collect 3-D data (point clouds) that can be used for terrain modelling. The lidar gathers scans which are then merged together to map a terrain. Typically this is done using a variant of the well-known Iterated Closest Point (ICP) algorithm when position and pose of the lidar scanner is not accurately known. One difficulty with the ICP algorithms is that they can give poor results when points that are not common to both scans (outliers) are matched together. With the advent of MEMS (microelectromechanical systems)-based GPS/IMU systems, it is …

Value Landscape Engineering: Identifying Costs, Water Use, Labor, And Impacts To Support Landscape Choice., Kelly Kopp, Larry Rupp, Paul G. Johnson, Roger K. Kjelgren, David E. Rosenberg, Heidi Kratsch

CWEL Publications

We present a spreadsheet model that identifies the costs, water, labor, fertilizer, pesticides, fuel, energy, carbon emissions, and particulates required of and generated by a user-specified residential or commercial landscape over its economic life. This life includes site preparation, materials purchase, installation, annual maintenance and replacing landscape features that wear out or die. Users provide a variety of site-descriptive information and the model queries an extensive database of landscape data to calculate costs, required inputs, and impacts. We verified model results against observations of water, labor, fertilizer, and fuel use over eight years at three landscapes in the Salt Lake …

Looking Below The Surface Of Breast Tissue During Surgery, A Mahadevan-Jansen, Md Keller, Elizabeth Vargis, B Caldwell, T-Q Nguyen, Ndm Granja, M Sanders, Mc Kelley

Biological Engineering Faculty Publications

In this article, we present a method that provides prompt detection of the presence of cancer cells inside the 2-mm margin of tissue surrounding the tumor after excision using spatially offset Raman spectroscopy (SORS). SORS was developed to detect subtle changes in soft tissue spectra in the 100–2000 μm range and tested on excised breast tissues. The results display a very high specificity and sensitivity (100% and 95%, respectively) of classification between positive and negative tumor margins. SORS is a clinically feasible method, suitable for the real-time, intraoperative assessment of tumor margins at the micrometer level.

Simple And Appropriate Methods For Household Water Treatment, Morris Elya Demitry

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Shortage of drinking water is the big challenge for Sudan. The cost of water treatment is the main reason for using untreated water for drinking purposes in many urban areas in Sudan. Water born‐diseases (diarrhea, typhoid, etc) are common and there are many victims in unimproved urban areas in Khartoum (Sudan) due to poor or the lack of treatment of drinking water.

In this work, a simple and appropriate method (sand filter) for household water treatment was tested and developed. The main objective of using this method is to help people in urban areas without access to treated water to …

Development Of A Reconfigurable Multi-Faceted Communications Device Using Partial Dynamic Reconfiguration, Richard Dunkley

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Supporting a variety of communication protocols has typically required extensive hard- ware and Input/Output (I/O) interfaces targeting each protocol specifically. Recent designs in the past ten years have created more dynamic approaches by using Field Programmable Gate Arrays (FPGAs) and embedded hardware to implement or simulate previous hardware I/O designs. With the constant increase in FPGA and embedded technologies the capabilities of dynamic implementations have expanded. This report addresses the design of an up-to-date reconfigurable multi-faceted embedded device targeting recent technological advances in FPGAs.

Pavement Management Systems On A Local Level, Cristian A. Vasquez

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Roads are one of the most valuable infrastructure assets within a community. Proper maintenance of the roadway network can promote the prosperity of a community. In recent times maintenance has become much more difficult with the price of asphalt increasing drastically and city budgets contracting due to the economic downturn. With these conditions, the proper management of an agency’s street network is necessary. The use of pavement management systems provides the help needed in the preservation of the street network. The use of pavement management systems provides significant benefits such as identification of the most cost-effective pavement treatment actions and …

Improving Concrete Containment Structures Associated With Fixed-Cone Valves, B. Skyler Buck

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Fixed-Cone valves are often used to dissipate energy and regulate flow at the low level outlet works of dams. Fixed-Cone valves, also known as Howell-Bunger valves, create an expanding conical jet allowing the energy of the water to dissipate over a large area. However, in many applications constructing the large stilling basin necessary for these valves is either not possible or not feasible. In order to reduce the relative size of the stilling basin, hoods or concrete containment structures have been used in conjunction with Fixed-Cone valves. This paper compares two methods of energy dissipation used in conjunction with concrete …

Assessing Phosphorus-Transport From Biosolids Land Application Sites In Utah, Mohan K. Kumar

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Phosphorus Site Index (PSI) is a phosphorus transport assessment tool used to estimate the risk of P transport from soils. Various components, such as soil erosion, P fertilizer application rate, plant available P in soil, etc. that have an influence on P transport from a site, are weighted and given ratings, and a combination of these components are expressed as PSI. This study has considered two biosolids land application sites in Utah, which received biosolids amendments over time, to develop a specialized PSI for the state of Utah.

Phosphorus from land application of biosolids has been considered a potential risk …

Theoretical Approach For Error Estimation Of Temperature And Thermal Conductivity In Uranium Dioxide Fuel, Adam John Gerth

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

The knowledge of in-reactor thermophysical properties of nuclear fuel rods, which are usually composed of uranium dioxide (UO2) ceramics, is important for the safe design and operation of nuclear power plants. A two thermocouple method can be utilized to determine the thermal conductivity within the fuel rods by measuring rod centerline temperature and cladding temperature. Using this technique, Halden Reactor Project (HRP) has developed a correlation for thermal conductivity of UO2 as a function of temperature and burnup. This correlation for thermal conductivity was extracted from experimental data based on a constant thermal conductivity assumption of the fuel rod. However, …

Combating Antibiotic Resistance Through Development Of A Novel Antimicrobial Delivery Vehicle, Alex Hatch

Undergraduate Honors Capstone Projects

A thermoreversible gel for antimicrobial agent delivery would provide a novel platform suitable for medical applications from persistent infections arising from localized biofilms. Thermoreversible gels could be used to coat medical implants, to inject for subdermal treatments, or to implement in topical applications. FDA approved Pluronics® form thermoreversible gels and certain Pluronics® display inherent varying degrees of antimicrobial activity. Pluronics® have been shown to affect efflux pumps, and reduce ATP levels within the bacterial cell. In combination with antibiotics and other pharmaceuticals, Pluronics® have been used to sequester drugs and act as a delivery vehicle. With advances in nanomedicine, nanoparticles …

A 6-Degree Of Freedom Static Thrust Stand Developed For Rc-Scale Jet Engines, Spencer Sessions

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

The description of a portable 6-degree of freedom static thrust stand for RC-scale jet engines is reported. The stand includes three axial and three lateral load cells measuring static thrust with six degrees of freedom. A pitot probe with single axis position control placed perpendicular to exhaust flow measures stagnation pressure along the nozzle centerline. A pitot probe open to the inside of the engine nozzle normal to the exhaust flow and near the outlet measures static pressure. A digital scale measures fuel consumption. The engine is mounted with exhaust gases exiting upward avoiding ground effects and thrust acting downward. …

South Davis Sewer District Pump Station Hydraulic Capacity Evaluation, James W. Dixon

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

In 2010, South Davis Sewer District (SDSD) determined that possible hydraulic problems existed in their various pump stations operating within their treatment plants. A hydraulic analysis was conducted for the pump stations to diagnose the problems and provide possible alternative solutions. This analysis was conducted by using hydraulic minor loss equations to determine the amount of flow that the pumps were capable of producing and then comparing those results to the required demands in the plants. In cases where the flows were lower than needed, alternatives were designed to provide the required flows.

In the south plant the pumps were …

Heat Transfer Through A Rotating Ball Bearing At Low Angular Velocities, Sarah Isert

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Bearings are commonly used in mechanical systems when there are rotating parts in the system. For bearings that run at speeds above about 1000 revolutions per minute, such as those used in aircraft turbines, machining tools, and automotive engines, it is important to take into account the heat transfer through the bearing system due to friction. Heat transfer is generally not considered for applications where the bearing is rotating at low speeds, such as clocks and bicycles. However, for certain aerospace applications, such as precision instruments or wind turbines, the heat transfer through the bearing becomes relevant. The case where …

Remote Control And Automation Of The Crockett Canal Head Gates, Tyler Dean Richards

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

In order to improve the control of the Crockett canal an automated control system for the head gates was proposed and an analysis of design alternatives was conducted. Design alternatives were analyzed based on the criteria of reliability, operational improvement, cost and safety. After the analysis was completed recommendations as to which type of automation system to install were made. A comprehensive design of the recommended design is included. The automation of the head gates has been separated into two phases. Items to be included in phase one are: retrofit each of the existing head gates with a multi-turn gate …

Model-Based Stripmap Synthetic Aperture Radar Processing, Roger D. West

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Synthetic aperture radar (SAR) is a type of remote sensor that provides its own illumination and is capable of forming high resolution images of the reflectivity of a scene. The reflectivity of the scene that is measured is dependent on the choice of carrier frequency; different carrier frequencies will yield different images of the same scene.

There are different modes for SAR sensors; two common modes are spotlight mode and stripmap mode. Furthermore, SAR sensors can either be continuously transmitting a signal, or they can transmit a pulse at some pulse repetition frequency (PRF). The work in this dissertation is …