Engineering Commons^™

Remote Heart Rate Estimation Using Consumer-Grade Cameras, Nathan E. Ruben

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

There are many ways in which the remote non-contact detection of the human heart rate might be useful. This is especially true if it can be done using inexpensive equipment such as consumer-grade cameras. Many studies and experiments have been performed in recent years to help reliably determine the heart rate from video footage of a person. The methods have taken an analysis approach which involves temporal Itering and frequency spectrum examination. This study attempts to answer questions about the noise sources which inhibit these methods from estimating the heart rate. Other statistical processes are examined for their use in …

Methods For Growing Retinal Pigment Epithelial Cells: Current Protocols And Future Recommendations, Aaron H. Fronk

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

The retinal pigment epithelium (RPE) is a layer of tissue found in the vertebrate eye between Bruch’s membrane and the photoreceptor layer of the neural retina [1]. It is derived from the outer layer of the optic cup [2], possesses an innate immune system [3], and consists of a monolayer of highly pigmented cells that fit together in a tight matrix (fig. 1) [4]–[6]. The monolayer is often compared to a mosaic or cobblestones in its configuration, while the shape of the individual cells is usually described as polygonal/hexagonal, columnar (aligned perpendicular to the underlying membrane), or “epithelioid”. The cells …

Use Of Direct Metal Laser Sintering For Tooling In High Volume Production, Joel W. Hendrickson

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Metal 3D printing has caught the attention of many large industries. There have been stories of great success using metal 3D printing. Some of the largest industries to successfully use metal 3D printing are aerospace and medical. These industries have succeeded with metal 3D printing because of their need for light and complex parts. These success stories lead other industries to investigate how metal 3D printing or Direct Metal Laser Sintering (DMLS) can help them. Industries that are involved in high volume production ask how they can take advantage of the complexity and customization that is available with 3D printing. …

Innovative And Efficient Simulation-Optimization Tools For Successful Groundwater Management And Conflict Resolution, Bassel Timani

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Simulation-Optimization (S-O) models are exemplary for strategic groundwater management planning. The two components of an S-O model serve different purposes. The simulation component models the aquifer and computes state variables resulting from stimuli such as extraction or diversion while the optimizor computes an optimal set of stimuli that maximize an objective function and satisfy a set of constraints. With the increased use of S-O model for larger and more complex real-world study areas, the use of fast and efficient S-O models has risen. Response matrix methods (RMMs) are usually used as substitute simulators within an S-O to solve the posed …

Students' Task Interpretation And Conceptual Understanding In Electronics Laboratory Work, Presentacion Rivera-Reyes

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Students’ interpretation of an assigned task is a key determinant of setting goals, choosing strategies to accomplish those goals, monitoring, and self-evaluating outcomes. Laboratory activities, including worksheets, quizzes, and other assignment are designed to improve the understanding of concepts taught in the classroom. The main concern of many laboratory students is simply completion of the task because it is critical to their success. Three objectives were proposed in this study, to investigate: (1) the students’ interpretation of the task before and after the completion of the laboratory activity, (2) the interpretation of the task differs between high- and low- coregulated …

Microscopic Modeling Of Crowds Involving Individuals With Physical Disability: Exploring Social Force Interaction, Daniel S. Stuart

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Nearly one quarter of a population is affected by a disability which influences crowd evacuation. Emergencies such as stampede or crowd crush can occur during evacuations. While research has investigated crowd evacuation, little has been researched involving individuals with disabilities. There is a need to understand and model individuals with disabilities in their interaction and how it impacts crowd movement. This dissertation creates a video tracking system to study heterogeneous crowds with individuals with disabilities towards conducting crowd experiments. A large-scale crowd experiment is conducted and the results are analyzed through a developed analysis graphical user interface. Preliminary results of …

Smart Carabiner, Craig Manning

Undergraduate Honors Capstone Projects

Users of common climbing safety equipment rarely understand exactly the loads and forces they are exerting on the equipment at a given time. All climbing equipment comes with a certified safety rating for the amount of force, in kilonewtons, that particular piece of equipment can take. Unfortunately, calculating dynamic load strain on-the-fly is nearly impossible. There needs to be a reliable, easy way of knowing exactly what load is being placed on a piece of equipment at any given point of time.

Lateral Control Of A Vehicle Platoon, Samuel A. Mitchell

Undergraduate Honors Capstone Projects

Multiple lateral control systems are analyzed for use in a vehicle platoon system. In order to ensure the safety of the vehicle platoon, the system must operate under three constraints: (1) accurate path following, (2) string stability, and (3) functionality in the presence of noise. Computer simulations are employed to analyze candidates according to the safety requirements. Actual vehicle kinematics and nonlinearities - limits on turn radius, velocity, and acceleration - are included in this analysis.

Successful control system candidates are implemented in a platoon of five differential-steer vehicles. The sensing and communication requirements of the control system are discussed. …

Direct Electrical Arc Ignition Of Hybrid Rocket Motors, Michael I. Judson Jr.

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Hybrid rockets motors provide distinct safety advantages when compared to traditional liquid or solid propellant systems, due to the inherent stability and relative inertness of the propellants prior to established combustion. As a result of this inherent propellant stability, hybrid motors have historically proven difficult to ignite. State of the art hybrid igniter designs continue to require solid or liquid reactants distinct from the main propellants. These ignition methods however, reintroduce to the hybrid propulsion system the safety and complexity disadvantages associated with traditional liquid or solid propellants. The results of this study demonstrate the feasibility of a novel direct …

Transportation Economics And Energy, Ali Soltani Sobh

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Transportation is one of the major energy consuming sectors in the United States. The continued growth in fuel consumption not only increases dependency on foreign oil but also causes environmental issues due to the emissions of greenhouse gas (GHG). High gasoline consumption in the US transportation sector not only raises concerns regarding national energy security, but also poses many questions regarding the resulting environmental impacts of greenhouse gases emissions. Improvement in automobile fuel economy, increase the use of natural gas vehicles and electric vehicles have been proven to be as the policies in controlling oil demand and GHG emissions in …

Effect Of Manufacturing Processes On The Loss Factor And Other Mechanical Properties Of Kenaf Fiber-Reinforced Composites, Brian P. Spackman

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The characteristics essential for manufacturing parts and products are not well known for natural fiber-reinforced composite materials. Natural fibers display properties similar to glass fibers, and present a more environmentally friendly option for manufacturing composite materials. This research investigates various parameters in the manufacture of kenaf fiber-reinforced composites including cure time, density, matrix hardener ratio, surface treatment, and fiber length and examines the effect they have on mechanical properties of the composite material. Several samples were created and subjected to a vibrational test. Using known relationships, mechanical properties were extracted from the test results. Samples were found to exhibit repeatable …

Electrokinetic Flow In A Nanochannel With An Overlapped Electrical Double Layer, Zhuorui Song

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This research is a theoretical study aiming to improve the understanding of nanofluidic flows. Nanofluidic flows have a wide range of potential application in many fields, such as DNA analysis, drug delivery, analyte separation, power generation, and so on. The most common material used in nanofluidic flows is silica whose surfaces are charged mainly due to proton exchange with the fluids. Charges on the surfaces as well as near the surfaces in the fluid side cause a significantly different response of the fluids to the applied electric field or pressure difference compared to those at normal scale. In the previous …

Molecular Sensing And Imaging Of Human Disease Cells And Their Responses To Biochemical Stimuli, Lifu Xiao

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Advancement in microscopic and spectroscopic techniques could significantly improve our ability in the study and diagnosis of diseases. Especially, being able to image and detect human diseases at the cellular and molecular level allows people to diagnose diseases at early stages and to study the molecular mechanisms behind various diseases. Currently, histopathological techniques are most widely used for prognosis and diagnosis of human diseases. However, conventional histopathology requires a complex process of sample preparation, which limits the diagnostic efficiency of this technique. More importantly, it requires fixation of tissue or cell sample, making it unsuitable for the study of dynamic …

Laboratory Study On The Effects Of Exit Face Inclination Of Critical Gradients, Richard Allen Keizer Jr.

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The objective of this research is to help better understand the effects of exit face inclinations on critical gradients. This will lead to more practical ways to predict critical hydraulic gradients and slope stability using soil properties and exit face conditions. Current geotechnical engineering does not consider these factors because they are not thoroughly understood. Despite the attempts to better predict critical gradients, methods developed over 70 years ago to model the heave mechanism are used to model failure mechanisms such as backward erosion (or piping). This critical hydraulic gradient is only calculated by means of the buoyant unit weight …

Techno-Economic Feasibility And Life Cycle Assessment Of Dairy Effluent To Biofuel Via Hydrothermal Liquefaction, Hailey M. Summers

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Delactosed whey permeate (delac) is a low valued by-product in the dairy industry with 90 million tons annually disposed of worldwide. Upgrading delac to bioproducts, specifically biofuel, has been demonstrated at laboratory scale through yeast fermentation. However, the large-scale environmental impact and economic feasibility of this process is yet to be quantified. Further research, focused on evaluating the sustainability, scalability and economic feasibility of the fermentation pathway, directs research and development to move the technology towards commercialization. The enclosed research incorporates biological experimentation with engineering systems modeling to evaluate the large-scale environmental impacts and economic feasibility of generating bioproducts from …

High Resolution Multi-Spectral Imagery And Learning Machines In Precision Irrigation Water Management, Leila Hassan-Esfahani

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The goals of preserving scarce water resources, cultivating more lands, and saving on irrigation water bills have directed the attention of water resources managers toward the concepts of precision agriculture and, in particular, to precision irrigation. The purpose of precision irrigation is to increase irrigation efficiency to avoid crop water stress, avoid yield reduction due to under-irrigation and leaching of nutrients, runoff, and reduce soil erosion due to over-irrigation. In this study, irrigation efficiency has been defined in terms of irrigation uniformity and the response of the crop to irrigation. Crop water demand, soil moisture, evapotranspiration rate, and potential water …

An Online Wear State Monitoring Methodology For Off-The-Shelf Embedded Processors, Srinath Arunachalam

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Every year transistors are becoming smaller and smaller. The continued trend of transistors becoming smaller has led to double amount of transistors being placed in the same area of space from its previous generation. This has led to an exponential increase in the amount of power per unit volume on-chip, which has resulted in increasing temperature. In turn, the increase in temperature directly leads to the increase in the rate of wear of a processor. Negative-bias temperature instability (NBTI) is one of the most dominant integrated circuit (IC) failure mechanisms [5, 13] that strongly depends on temperature. NBTI manifests in …

Experimental Validation Data For Cfd Of Steady And Transient Mixed Convection On A Vertical Flat Plate, Blake W. Lance

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In this computer age, simulations are becoming common in science and engineering. One category of simulation, Computational Fluid Dynamics (CFD), begins with physical equations but adds approximations and calibrations in order to complete solutions. Translating these equations into computer languages may cause unintended errors. If simulation results are to be used for decision making, their accuracy needs to be assessed. This accuracy assessment is the theory behind the field of Verification & Validation.

Verification involves confirming the translation of physical equations to computer language was per- formed correctly. It also features methods to detect many types of code errors. Validation …

Effective Properties Of Randomly Oriented Kenaf Short Fiber Reinforced Epoxy Composite, Dayakar Naik L.

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Natural fibers have drawn attention of researchers as an environmentally-friendly alternative to synthetic fibers. Developing natural fiber reinforced bio-composites are a viable alternative to the problems of non-degrading and energy consuming synthetic composites. This study focuses on (i) the application of kenaf fiber as a potential reinforcement and, (ii) determining the tensile properties of the randomly oriented short kenaf fiber composite both experimentally and numerically. Kenaf fiber micro-structure and its Young's modulus with varying gage length (10, 15, 20, and 25.4 mm) were investigated. The variation in tensile strength of kenaf fibers was analyzed using the Weibull probability distribution function. …

Testing Of Rainflow Histograms Of Strain For Implementation As A Bridge Weigh-In-Motion Technique, Nephi R. Johnson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The highways and bridges that make up the nation’s infrastructure are becoming older and need replacement or maintenance. In order to determine the best use of funds, bridges are being monitored and studied. This paper was part of a long term study with the goal of monitoring multiple bridges for several years in order to develop an extensive network of bridge information. This particular study was on a bridge in Utah that was instrumented with permanent measurement and monitoring devices. Monitoring of bridges provides information on how the temperature and weather cause the bridge to move, change and age. It …

Systems Optimization Models To Improve Water Management And Environmental Decision Making, Omar Alminagorta Cabezas

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The degradation of water quality and wetlands is one of the most challenging environmental problems around the world. In spite of the magnitude of these environmental problems, few efforts identify how scarce resources (e.g., water, budget) can be more efficiently used to solve these problems. This dissertation presents a set of tools to help solve environmental problems related to excess phosphorus levels in water bodies and wetland degradation caused by water shortages and invasive vegetation. These tools are presented in three studies. The first study presents a simple optimization model that identifies the cost-effective combination of management practices to reduce …

Methods Of Processing Kenaf Chopped Strand Mats For Manufacturing Test Specimens And Composite Structures, Joshua W. Heil

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Every year in the United States, 10 to 11 million vehicles reach the end of their life cycle. Nearly all of these go to a recycling facility. After the recycling process is complete an average of 25% of each vehicle, by weight, goes to waste. This demonstrates the need to use natural fibers in parts that could be recycled, like parts that can be made from kenaf. There are many reasons to consider using natural/bio-fiber composites (bio-composites). These reasons include human health and environmental factors as well as advantages that natural fibers have over fiberglass, such as: lower costs and …

Arsenic Release From Dechlorination Remediation Processes Of Biostimulation And Bioaugmentation, Suzy Smith

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Arsenic (As), a known carcinogen, is a groundwater contaminant in many parts of the world. Arsenic contamination is enhanced through carbon addition, such as biostimulation, a remediation process, which has been used to remove trichloroethylene (TCE) from sediment and groundwater. Two studies were designed to evaluate the effect of different carbon sources on the removal of TCE through dechlorination and on As solubilization and mobilization in response to carbon addition.

The first set of columns (15.2 cm diameter, 183 cm long) used whey, Newman Zone® standard surfactant emulsified oil, Newman Zone® nonionic surfactant emulsified oil, and no carbon controls as …

Continuous Unbonded Post-Tensioned Members: Quantifying Strand Stress Increase, Philip D. Six

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Unbonded post-tensioning tendons are an efficient and cost effective method of reinforcing concrete floor slabs, slabs-on-grade, parking garages, and bridge structures. However, the behavior of these structures is not well understood. There is concern that due to the lack of a significant amount of reliable research data on specimens reinforced in this manner, the commonly used design methods tend to significantly under-predict the strength. Four large, scaled, floor slab sections were constructed and destructively tested with the intent of more accurately understanding the strength of specimens reinforced with this method. Four test specimens represent a significant percentage of the current …

Microfabrication Of Electrochemical Analytical Devices For Detection Of Pathogen Species Dna And Toxic Metal Ions, Spencer Williams

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Water quality is a crucial factor in determining the health of an environment, and in turn the health of all those living in the given environment. Early detection of potential hazards in source water used for drinking would help to avoid outbreaks of sickness and even death. Contaminants, found in contact and drinking water, having negative effects on human health may include pathogenic microorganisms, and metal ion pollutants such as lead or cadmium. Lead and cadmium were selected due to well-known electrochemical properties providing easy references for developing new detection devices. Current methods for detection of these contaminants are extremely …

Catalytic Fast Pyrolysis Of Whole Field Pennycress Biomass, Yonas Afewerki Kidane

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

To satisfy the energy demand of the ever-increasing world population as well as to prevent environmental pollution arising from the use of fossil fuels, an alternate source of energy has to be developed. Biomass has the potential to provide a renewable energy source that is inexpensive and environmentally friendly. Field pennycress (Thlaspi arvense L.), previously considered as a weed, has now been found to be an ideal source of bio-fuel production. The focus of this research was to produce upgraded bio-oil by a process known as catalytic fast pyrolysis. A characterization and a temperature degradation profile study helped to …

Catalytic Pyrolysis Of Olive Mill Wastewater Sludge, Hamza Abdellaoui

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

From 2008 to 2013, an average of 2,821.4 kilotons/year of olive oil were produced around the world. The waste product of the olive mill industry consists of solid residue (pomace) and wastewater (OMW). Annually, around 30 million m³ of OMW are produced in the Mediterranean area, 700,000 m³ year⁻¹ in Tunisia alone. OMW is an aqueous effluent characterized by an offensive smell and high organic matter content, including high molecular weight phenolic compounds and long-chain fatty acids. These compounds are highly toxic to micro-organisms and plants, which makes the OMW a serious threat to the environment if …

Computational Fluid Dynamics Simulations Of Oscillating Wings And Comparison To Lifting-Line Theory, Megan Keddington

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Computational fluid dynamics (CFD) analysis was performed in order to compare the solutions of oscillating wings with Prandtl’s lifting-line theory. Quasi-steady and steady-periodic simulations were completed using the CFD software Star-CCM+. Quasi-steady simulations were completed for both twodimensional and three-dimensional setups. The steady-periodic simulations were only performed using a three-dimensional setup. The simulations were performed for nine separate frequencies in a pure plunging setup. An additional four simulations were then completed using a setup of combined pitching and plunging at four separate frequencies. Results from the CFD simulations were compared to the quasi-steady lifting-line solution in the form of the …

Anaerobic Co-Digestion Of Algal Biomass And A Supplemental Carbon Source Material To Produce Methane, Yousef Soboh

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The demand on alternative energy is rapidly increasing because the reserves of conventional fuel are decreasing and their impacts on the environment are increasing.
Developing renewable energy sources should receive utmost attention. The production of biofuels like methanol, biodiesel, and methane from various kinds of abundant biomass represents a very attractive energy source that can reduce the dependence on conventional fossil fuels energy.

Since algae contains high amounts of nitrogen and low carbon content, this research focused on anaerobic fermentation of algae to produce methane by blending algae with a supplemental carbon source material, sodium acetate. This was done to …

Parameterized Least-Squares Attitude History Estimation And Magnetic Field Observations Of The Auroral Spatial Structures Probe, Ryan J. Martineau

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

As charged particles from the Sun enter the Earth’s atmosphere and create the aurora borealis (Northern lights) and aurora australis (Southern lights), energy is transferred to the atmosphere. In order to better understand the energy transfer processes, the Auroral Spatial Structures Probe rocket was launched to make measurements in the active aurora. Several payloads were deployed by the rocket, each with sensors to measure the magnetic field and the electric field so that the way they change over time and in different positions could be observed. The measurements require accurate knowledge of the spacecraft orientation, and to that end this …