Engineering Commons^™

Physically Based Modeling Of The Impacts Of Climate Change On Streamflow Regime, Nazmus Shams Sazib

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Understanding the implications of climate change on streamflow regime is complex as changes in climate vary over space and time. However, a better understanding of the impact of climate change is required for identifying how stream ecosystems vulnerable to these changes, and ultimately to guide the development of robust strategies for reducing risk in the face of changing climatic conditions. Here I used physically based hydrologic modeling to improve understanding of how climate change may impact streamflow regimes and advance some of the cyberinfrastructure and GIS methodologies that support physically based hydrologic modeling by: (1) using a physically based model …

A Comprehensive Safety Analysis Of Diverging Diamond Interchanges, Holly Lloyd

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

With the implementation of new roadway configurations, there is a great need to study the influence of the roadway design on the crash rate. Utah is one of the leading states in the implementation of the Diverging Diamond Interchange.

In order to determine the effects of the new roadway configuration on the safety of the intersection, this study employs an Empirical Bayes before-after study of the crash rates at selected Diverging Diamond Interchanges in Utah. The results of the Empirical Bayes method were also used to calculate crash modification factors. The total number of crashes at each site were analyzed. …

Ssaga: Streaming Multiprocessors (Sms) Sculpted For Asymmetric General Purpose Graphics Processing Unit (Gpgpu) Applications, Shamik Saha

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The evolution of the Graphics Processing Units (GPUs) over the last decade, has reinforced general purpose computing while sustaining a steady performance growth in graphics intensive applications. However, the immense performance improvement GPUs are already close to the abominable power wall. With a massive popularity of the mobile devices running general-purpose GPU (GPGPU) applications, it is of utmost importance to ensure a high energy efficiency, while meeting the strict performance requirements. Hence, a flexible GPU design paradigm is the need of the hour.

In this work, using a system level Computer Aided Design (CAD) technique, we propose SSAGA - …

A New Low-Cost Microstrip Antenna Array For 60 Ghz Applications, Darwin J. Joaquin

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The use of telecommunications and the amount of data exchanged continue to grow at exponential rates. New technologies allowing for higher data transfer speeds while keeping the products affordable are required. Among these technologies, the WiGig protocol promises to be a shorter-range complement for high-speed Wi-Fi. One of the most important elements in a communication system are the antennas. For this reason, it is of great interest to have antennas that keep on pace with the other elements of the system. It is important to have affordable and high performance antennas to expand the use of the technology. This research …

Production Of Synthetic Spider Silk Fibers, Cameron G. Copeland

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Dragline spider silk is among the strongest known biomaterials. It is the silk used for the framework of the web and it is used to catch the spider if it falls. As such, it is stronger and much more flexible than KEVLAR©. Studies show that dragline silk is made of two proteins, Major Ampullate Spider Proteins 1 and 2 (MaSp1 and MaSp2). Due to its incredible mechanical properties, spider silk is being considered for use as a new biomaterial for drug delivery and tendon and ligament replacement/repair, as well as athletic gear, military applications, airbags, and tire cords. However, spiders …

Effects On A Wedge Flowmeter Installed Downstream Of A Double Elbow Out Of Plane, Devan S. Radle

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Precise flow measurement is a critical part of many industries including industrial, hydropower, petroleum, nuclear, and water/wastewater. Lengthy upstream piping is required for many flowmeters to obtain accurate results. Due to piping constraints, sub- optimal flow meter installations can occur. One of these conditions is the installment of a flow meter in close proximity downstream of a double elbow out of plane (DEOP). A DEOP can cause swirl to form in the flow and can cause inaccurate metering results due to the non-uniform flow and pressure conditions. This study investigated the effect of installing a differential pressure producing wedge flow …

Developing More Efficient Mechanically Stabilized Earth (Mse) Wall Reinforcements, Matthew J. Rahmeyer

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The most common shape for metallic reinforcement in Mechanically Stabilized Earth (MSE) walls is a rectangular strip. The amount of force required to pull the reinforcement out of the wall versus how much steel is required is well balanced.

This study shows that a metal round bar can be altered, either by bending into various geometries or welding into crossbars, and provide similar and sometimes higher resistance to pullout than the rectangular strip. This was achieved while reducing the weight per foot of reinforcement of steel required and providing cost saving benefits.

Design Of Miniaturized Time-Of-Flight Reflectron Mass Spectrometer For Upper Atmosphere Density Measurements, Michelle Lynn Pyle

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Upper atmosphere and solar events can have strong impacts on the communication, power, and navigation systems we use every day. Modeling atmospheric dynamics, or the changes and reactions of different regions of the atmosphere, can help improve understanding and predictions of the effects of solar events. A suite of measurements of the upper atmosphere, including wind, temperature, and composition measurements, is used to build atmospheric models. Current atmospheric models are very sophisticated but need additional data to fully model atmospheric dynamics. In the past, measurements used to determine atmospheric composition have been performed using mass spectrometer instruments on full-size satellites. …

An Automatic Algorithm For Textured Digital Elevation Model Formation Using Aerial Texel Swaths, Taylor C. Bybee

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The process of creating a 3D terrain map of an area is a challenging, computationally intensive task. There are two main camps of established methods doing this, with varying degrees of accuracy and cost. Using the established methods, there is a trade-off between accuracy and cost. The first method involves using many aerial images to detect disparity between points in the images. This is a difficult task as it requires a lot of computer processing with varying degrees of reliability. In addition, this method does not make any direct distance measurements. Secondly, using high-precision and high-cost lasers and positioning equipment, …

Achieving Uniform Flow Distribution In Compact Irrigation Splitter Boxes With High Flow Rates, Joshua Ryan Hogge

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In many irrigation systems and networks, there are multiple water users and shareholders who take their water from different locations along a single canal or pipeline. Often, irrigation splitter boxes are used to divert water to multiple shareholders from a single location. The splitter boxes, which can be small and compact, are generally installed at different locations along a piped irrigation supply line. The purpose of a splitter box is to split a specific amount of water so that each user receives their allotted portion, regardless of the flow rate in the system.

Each splitter box usually includes two compartments, …

Impact Of Mass And Bond Energy Difference And Interface Defects On Thermal Boundary Conductance, Changjin Choi

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Many portions of energy generated in the U.S. are not used and take the form of wasted heat due to a poor heat transfer efficiency. This fact leads research communities to focus on thermoelectrics as a means for using waste heat through direct thermal to electrical energy conversion. One way to enhance thermoelectric efficiency is to reduce thermal conductivity through nanostructuring. In nanostructures, understanding energy transport across the interface of two materials is important because interfaces dominate the resistance to overall thermal transport of the system and can be described by thermal boundary conductance (TBC). Also of note, an understanding …

Visualization Of Three-Dimensional Models From Multiple Texel Images Created From Fused Ladar/Digital Imagery, Cody C. Killpack

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The ability to create three-dimensional (3D) images offers a wide variety of solutions to meet ever increasing consumer demands. As popularity for 3D cinema and television continues to grow, 3D images will remain an important area of research and development. While there are a variety of ways to create a 3D model, textel images are quickly become the preferred solution that has been captured with a texel camera. The combination of multiple texel images taken around a scene can be used to form a texel model. Offering both visual and dimensional accuracy, texel models are becoming invaluable tools for disaster …

An Optical System To Transform The Output Beam Of A Quantum Cascade Laser To Be Uniform, Jordan M. Jacobson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Quantum cascade lasers (QCLs) are a candidate for calibration sources in space-based remote sensing applications. However, the output beam from a QCL has some characteristics that are undesirable in a calibration source. These characteristics need to be mitigated before QCLs can be used as calibration sources. This study presents the design and implementation of an optical system that removes the undesirable characteristics from a QCL output beam, so it can be used as a calibration source.

Efficient Device To Device Communications Underlaying Heterogeneous Networks, Xue Chen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Device-to-Device communications have the great potential to bring significant performance boost to the conventional heterogeneous network by reusing cellular resources. In cellular networks, Device-to-Device communication is defined as two user equipments in a close range communicating directly with each other without going through the base station, thus offloading cellular traffic from cellular networks. In addition to improve network spectral efficiency, D2D communication can also improve energy efficiency and user experience.

However, the co-existence of D2D communication on the same spectrum with cellular users can cause severe interference to the primary cellular users. Thus the performance of cellular users must be …

Accumulation And Release Of Trace Inorganic Contaminants From Biofilm Matrices Produced And Challenged Under Drinking Water Distribution System Conditions, William W. Kent

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Drinking water distribution systems (DWDS) are used to transport drinking water from the place of treatment to your home. DWDS are made of many types of pipe materials and have the potential to accumulate materials such as iron and manganese oxides and biofilms that serve as reservoirs for toxic trace inorganic contaminants (TICs) such as thallium, arsenic, and lead. These materials can be stable, but changes in water quality or a physical disturbance such as road construction or water use changes may result in a TIC release, causing water quality degradation. This study used glass columns filled with glass beads …

Engineering Of Polyketide Biosynthetic Pathways For Bioactive Molecules, Siyuan Wang

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This study is focused on engineering of natural product biosynthetic pathways for efficient production of pharmaceutically important molecules or generation of new bioactive molecules for drug development.

Plant natural products are an important source of therapeutics, such as paclitaxel (anticancer) and artemisinin (anti-malarial). Production of plant natural products relies on conventional plant cultivation and solvent extraction, which is time-consuming and cost-ineffective. This work built a biosynthetic platform in Escherichia coli using seven biosynthetic genes from plants and bacteria, which were used to make valuable compounds such as the strong antioxidant resveratrol and anti-inflammatory agent curcuminoids. Through different combinations of these …

Blind Front-End Processing Of Dynamic Multi-Channel Wideband Signals, Kevin Jackson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Society today relies heavily on the exchange of information via wireless communication. Such communication provides the means of transferring information from point A to point B over the air. In order to accomplish this, a minimum of two devices is required: a transmitter and a receiver. Just as people must speak the same language in order to communicate, the receiver must know how the transmitter communicates in order to make sense of the data being transmitted. For multiple wireless communication system to coexist, they must each speak a unique language, which in the communications world is referred to as modulation. …

Thermal Property Measurement Of Thin Fibers By Complementary Methods, Troy Robert Munro

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Thin fibers are prevalent in many engineering materials. Measuring how well heat transfers in such small fibers can be difficult to determine, and previous methods have led to erroneous results. This dissertation details three proposed methods to improve the measurement of the thermal conductivity, thermal diffusivity, and volumetric heat capacity of thin fibers. Of particular interest is natural and synthetic spider silks because previously published values of the natural silk thermal conductivity was similar to copper, an excellent thermal conductor.

The three methods developed are the improved transient electrothermal technique (which was redeveloped to include radiation and convection heat losses …

Development Of A Three-Dimensional High-Order Strand-Grids Approach, Oisin Tong

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The strand-Cartesian grid approach is a unique method of generating and computing fluid dynamic simulations. The strand-Cartesian approach provides highly desirable qualities of fully-automatic grid generation and high accuracy. This work focuses on development of a high-accuracy methodology (high-order scheme) on strand grids for two and three dimensions.

In this work, the high-order scheme is extended to high-Reynolds number computations in both two and three dimensions with the Spalart-Allmaras turbulence model and the Menter SST turbulence model. In addition, a simple limiter is explored to allow the high-order scheme to accurately predict discontinuous flows.

Extensive verification and validation is conducted …

Anaerobic Hydrogen And Methane Production From Dairy Processing Waste: Experiment And Modeling, Jianming Zhong

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Dairy processing waste (DPW) is the waste produced from manufacturing dairy products: cheese, yogurt, ice cream, milk, butter, etc. DPW is high in chemical oxygen demand (COD) due to its lactose, fat and protein content, and therefore needs to be appropriately treated. An investigation was conducted to produce energy (hydrogen and methane) from DPW by anaerobic digestion. This project developed an effective engineering method for stable methane production from DPW without adding pH control chemicals. This study also explored the optimal operational condition for hydrogen production from DPW. We further built a mathematical model to help us monitor and predict …

Investigation Of The Tailoring Steps In Pradimicin Biosynthesis, Kandy L. Napan

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This research focused on the investigation of the late steps in the biosynthetic pathway of the novel antifungal and antiviral pradimicins A-C. Pradimicins were first isolated from the soil bacterium Actinomadura hibisca. These bioactive molecules are assembled by a type II polyketide biosynthetic pathway. Although the biosynthetic gene cluster of pradimicin has been identified, the functions of the biosynthetic genes and how they work collaboratively to form the final structures of pradimicins remain unknown. This research aims to functionally characterize the enzymes involved in the late steps of the biosynthetic route.

The early biosynthetic steps of pradimicins have been …

Quantifying The Removal Of Trichloroethylene Via Phytoremediation At Hill Air Force Base, Utah Operational Unit 2 Using Recent And Historical Data, J. Oliver Diamond

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Trichloroethylene (TCE) is a carcinogenic, chlorinated volatile organic compound that was commonly used as a degreasing solvent for aircraft maintenance at many US Air Force bases. Past improper disposal of TCE has resulted in contaminated groundwater plumes surrounding many of these facilities. Phytoremediation, defined as the use of plants and their associated microorganisms to stabilize or remove contamination, has been implemented as part of a TCE groundwater cleanup effort at Travis Air Force base near Sacramento, CA and is being considered as a remediation option at other bases. Volatilization of TCE from leaves and the surface of the soil near …

Traffic Sign Management: Data Integration And Analysis Methods For Mobile Lidar And Digital Photolog Big Data, Majid Khalilikhah

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Traffic signs often convey critical information to drivers. However, traffic signs are only effective when clearly visible and legible. This study aims to determine the effects of various damage and deterioration forms on sign retroreflectivity, identify the most important factors affecting traffic sign visual condition, predict traffic sign vandalism that obstructs critical messages to drivers, and identify important environmental factors contributing to the temporary obstruction of the sign messages. To do so, two data sets are used. A sample data of over 1,700 signs was manually collected in the field, and the background retroreflectivity of each sign was measured using …

Rudder Augmented Trajectory Correction For Unmanned Aerial Vehicles To Decrease Lateral Image Errors Of Fixed Camera Payloads, Thomas M. Fisher

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

When using small unmanned aerial vehicles (UAVs) with cameras onboard for ground surveying, two competing problems arise. First is the desire to keep the camera sensor parallel with the ground and second is to maintain the proper flight path. When the cameras are physically fixed to the UAV and as the plane banks to maintain the desired path, the camera sensor is no longer kept parallel with the ground. This thesis focuses on a method called rudder augmented trajectory correction that allows for flat turns instead of banking the aircraft. Because of this, the camera is able to stay parallel …

Low-Temperature Aqueous Corrosion Behavior Of Uranium Molybdenum Alloys, Levi D. Gardner

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Nuclear fuel characterization requires understanding of the various conditions to which materials are exposed in-reactor. One of these important conditions is corrosion, particularly that of fuel constituents. Therefore, corrosion behavior is of special interest and an essential part of nuclear materials characterization efforts. In support of the Office of Material Management and Minimization’s Reactor Conversion Program, monolithic uranium-10 wt% molybdenum alloy (UMo) is being investigated as a low enriched uranium alternative to highly enriched uranium dispersion fuel currently used in domestic high performance research reactors. The aqueous corrosion behavior of U-Mo is being examined at Pacific Northwest National Laboratory (PNNL) …

The Effects Of Meter Orientation Downstream Of A Short Radius Elbow On Electromagnetic Flow Meters, Jared C. Justensen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Electromagnetic flowmeters (known as magnetic flow meters) are a widely used type of flowmeter. The accuracy of magnetic flow meters are a function of several factors, not the least of which is the flow condition inside the pipe. It has been shown that disturbances in the velocity profile affects the accuracy of a magnetic flow meter (Luntta, 1998). Accordingly, manufacturers of magnetic flow meters give installation guidelines. These guidelines help prevent the user from installing the meter in a pipe configuration that is likely to cause the meter to produce inaccurate results. Although most manufacturers provide recommendations about the amount …

Developing A Method For Quantifying Nitrogen Transformation Rates Using In Situ Benthic Chambers Dosed With Isotopically Labeled Nitrate, Chelsea A. Stewardson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Nitrogen, a nutrient required for biological growth, is a common water quality parameter of concern as too much nitrogen can cause a strain on aquatic environments and even death of plants and animals. One way high levels of nitrogen are introduced into aquatic systems is by anthropogenic sources such as effluent from water reclamation facilities. A method was designed to observe the fate of nitrogen and measure the rates of its transformation into different nitrogen species within a stream receiving the effluent from the Silver Creek Water Reclamation Facility in Park City, Utah.

Sealed chambers were designed and installed along …

Application Of Computational Fluid Dynamics In Flow Measurement And Meter Design, Zachary B. Sharp

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Flow measurement has been an important part of society for hundreds of years. For this reason there are many methods to measure flow rates both in open channel scenarios like irrigation canals and also in closed conduits like pipelines that supply water for human use. This research focused on Venturi flow meters which have been used to measure flow since the 1890’s. The object of this research was to use computational fluid dynamics and laboratory data to provide industry with applicable answers to some under researched areas in flow measurement. The areas chosen for this research include areas requested by …

The Application Of Unmanned Aerial Vehicle To Precision Agriculture: Chlorophyll, Nitrogen, And Evapotranspiration Estimation, Manal Elarab

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Precision agriculture (PA) is an integration of a set of technologies aiming to improve productivity and profitability while sustaining the quality of the surrounding environment. It is a process that vastly relies on high-resolution information to enable greater precision in the management of inputs to production. This dissertation explores the usage of multispectral high resolution aerial imagery acquired by an unmanned aerial systems (UAS) platform to estimate three fundamental crop parameters (plant chlorophyll, leaf nitrogen and crop water demand). The UAS acquired imagery in the visual, near infrared and thermal infrared spectra with a resolution of less than a meter …

Effects Of Radiation Heating On Additively Printed Hybrid Fuel Grain Oxidizer-To-Fuel Ratio Shift, Stephen L. Merkley

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis examined the hypothesis that radiative heat transfer in small-scale printed-fuel hybrid rocket motors is responsible for the observed decreasing oxidizer-to-fuel (O/F) ratio shift. The magnitude of the radiation term was negligible for the motor sizes and types of propellants that have been previously tested, but was reintroduced in this study. To prove this hypothesis, a detailed enthalpy balance model was developed and tested using experimental fuel regression rate data obtained from a variety of motor scales using additively-manufactured acrylonitrile butadiene styrene (ABS) fuel grains.