Engineering Commons^™

Engineering Tutoring Center Offers In-Person And Virtual Help, Usu College Of Engineering

College of Engineering News

Sept. 10, 2020 — The Engineering Tutor Center is adapting to changing times and offering both face-to-face and virtual tutoring sessions. Tutoring services are free to students, and there is no need to schedule an appointment for remote or in-person tutoring. The center is located in Anderson Engineering 320.

Sharpening Ecostress And Viirs Land Surface Temperature Using Harmonized Landsat-Sentinel Surface Reflectances, Jie Xue, Martha C. Anderson, Feng Gao, Christopher Hain, Liang Sun, Yun Yang, Kyle R. Knipper, William P. Kustas, Alfonso F. Torres-Rua, Mitch Schull

Civil and Environmental Engineering Faculty Publications

Land surface temperature (LST) is a key diagnostic indicator of agricultural water use and crop stress. LST data retrieved from thermal infrared (TIR) band imagery, however, tend to have a coarser spatial resolution (e.g., 100 m for Landsat 8) than surface reflectance (SR) data collected from shortwave bands on the same instrument (e.g., 30 m for Landsat). Spatial sharpening of LST data using the higher resolution multi-band SR data provides an important path for improved agricultural monitoring at sub-field scales. A previously developed Data Mining Sharpener (DMS) approach has shown great potential in the sharpening of Landsat LST using Landsat …

Usu Biological Engineering Researchers Get $1.9m Doe Grant, Usu College Of Engineering

College of Engineering News

Sept. 4, 2020 — The Department of Energy has awarded $1.9 million for a Utah State University study focused on improving wastewater treatment and the prevention of toxic algae blooms.

Usu Team Awarded $1.1m For Critical Zone Research, Usu College Of Engineering

College of Engineering News

News Release — Sept. 3, 2020 — Utah State University researchers will join the National Science Foundation’s Critical Zone Collaborative Network Coordinating Hub to improve collaboration among engineers and scientists studying the Earth’s Critical Zone.

In Memoriam: Honoring Longtime Usu Supporter Rex Plaizier, Usu College Of Engineering

College of Engineering News

Aug. 31, 2020 — Students, faculty and staff at Utah State University are saddened by the loss of friend and mentor Rex Plaizier who died Aug. 27 after an 8-year battle with cancer. He was 61.

Collaborative Research: Cns Core: Small: Secure And Efficient Mobile Edge Computing In Wireless Heterogeneous Networks, Rose Qingyang Hu

Funded Research Records

No abstract provided.

Welcome To The College Of Engineering, Usu College Of Engineering

College of Engineering News

My name is Jagath Kaluarachchi, and I’m the Dean of the College of Engineering. We’re excited to welcome our first- year and returning Aggies back to campus.

Modeling And Simulation Of A Supercritical Co2-Liquid Sodium Compact Heat Exchanger For Sodium Fast Reactors, Hailei Wang, Sean M. Kissick

Mechanical and Aerospace Engineering Faculty Publications

The study focuses on modeling and simulations of sodium-sCO2 intermediary compact heat exchangers for sodium-cooled fast reactors (SFR). A simplified 1-D analytical model was developed in companion with a 3-D CFD model. Using classic heat transfer correlations for Nusselt number, some simulation results using the 1-D model have achieved reasonable match with the CFD simulation results for longer channels (i.e., 40 cm and 80 cm). However, for short channel (10 cm) when axial conduction within the sodium fluid is significant, the 1-D model significantly over-predicted the heat transfer effectiveness. By incorporating the temperature-jump model, the 1-D model can extend its …

Usu Launches Nsf-Funded Engineering Research Center For Electrified Transportation, Usu College Of Engineering

College of Engineering News

News Release and Media Advisory — Aug. 4, 2020 — The National Science Foundation has awarded Utah State University a five-year, $26 million grant, renewable to 10-year, $50.6 million, to develop an international research center dedicated to advancing sustainable, electrified transportation. The center is expected to raise more than $200 million over the next decade in government and industry support.

Nsf Engineering Research Center For Advancing Sustainability Through Powered Infrastructure For Roadway Electrification (Aspire), Zane Regan

Funded Research Records

No abstract provided.

Impacts Of Beaver Dams On Mountain Stream Discharge And Water Temperature, Timothy R. Clark

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Beaver dam complexes have been shown to affect the hydrologic processes controlling river systems. These processes include surface and groundwater exchanges, water chemistry and temperature variations, and river discharge magnitudes. Majerova et al. (2015) explored the effects of beaver dams on surface and groundwater exchanges and water temperature by evaluating three years of water discharge and temperature data recorded at multiple locations within a small stream in northern Utah. They found that beaver dams increase the water surface elevation and force water into the floodplain resulting in increased inundation and groundwater recharge. They additionally found that beaver dams increase residence …

Advancing Water Resources Systems Modeling Cyberinfrastructure To Enable Systematic Data Analysis, Modeling, And Comparisons, Adel Mohammad Kheir Abdallah

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Water resources systems models aid in managing water resources holistically considering water, economic, energy, and environmental needs, among others. Developing such models require data that represent a water system’s physical and operational characteristics such as inflows, demands, reservoir storage, and release rules. However, such data is stored and described in different formats, metadata, and terminology. Therefore, Existing tools to store, query, and visualize modeling data are model, location, and dataset-specific, and developing such tools is time-consuming and requires programming experience. This dissertation presents an architecture and three software tools to enable researchers to more readily and consistently prepare and reuse …

Evaluating The Hydraulic Performance Of Digital Photogrammetry-Derived 3-Dimensional Models Of A Hydraulic Structure Using Computational Fluid Dynamics, Tyler J. Ashby

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This research investigated the combination of aerial imagery, photogrammetry, and computational fluid dynamics (CFD). Two 3D models of an 8-ft ramp flume were developed from aerial imagery using a commercial photogrammetry software. The GCP model was developed using ground control points (GCP) to improve and measure the model's accuracy. The Non-GCP model used GCPs as check points, which only measure the model's accuracy. The horizontal and vertical errors were, respectively, 0.39 in. and 0.73 in. for the GCP model, and 5.37 in. and 2.80 in. for the Non-GCP model.

In addition to the GCP and Non-GCP models, two hybrid 3D …

The Role Of Carbonate Minerals In Arsenic Mobility In A Shallow Aquifer Influenced By A Seasonally Fluctuating Groundwater Table, Jeremy Jensen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Arsenic (As) is a poison historically used to great effect before modern detection methods rendered it obsolete. However, the largest mass poisoning in human history occurred due to groundwater in the Bengal Basin contaminated by natural sources of As. Since that time, research has determined that As is found in groundwater worldwide. This includes aquifers located in basin-filled valleys of the western United States. One of these valleys is the Cache Valley Basin located in Northern Utah. This semi-arid region contains carbonate-rich soils and is heavily influenced by snowmelt and seasonal runoff. Previous studies have found that 15% of private …

Cytomegalovirus Inhibition By Pluronic-Encapsulated Quercetin And Synergy With Ganciclovir, Ian Wadsworth

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Congenital cytomegalovirus (CMV) is the leading viral cause of birth defects worldwide and leads to a variety of complications. Ganciclovir is the most common anti-CMV drug used but often causes severe side effects. Quercetin, a plant pigment, shows anti-CMV activity that may provide a less toxic alternative to ganciclovir, or when co-administered, reduce ganciclovir treatments. However, a drug carrier is needed to deliver quercetin for CMV treatment. In this study, three Pluronic polymers (P123, F127, and F68) were investigated as a quercetin drug delivery system (DDS) for CMV treatment.

All selected Pluronics successfully encapsulated quercetin at varying degrees of efficacy. …

Transient Thermal Modeling Of Bioprocessing Equipment, Cody M. Cummings

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Bioprocessing is leveraging cells to produce high value, lifesaving products. Precise environmental control is needed to maintain integrity of the bioprocessing production process. Temperature control requires both appropriate equipment choice and correct control parameter selection. To aid in the equipment selection process, enable better understanding of equipment capacity, and enable optimization of control parameters, a transient thermal model of both heat transfer characteristics and control systems was created in silico.

Minimum Induced Drag For Tapered Wings Including Structural Constraints, Jeffrey D. Taylor, Douglas F. Hunsaker

Mechanical and Aerospace Engineering Student Publications and Presentations

LIFTING-LINE theory [1,2] is the foundation for much of our understanding of finite-wing aerodynamics. Solutions based on lifting-line theory are widely accepted and have been shown to be in good agreement with CFD [3-10]. From Prandtl’s analytic solution to the classical lifting-line equation [1,2], the wing section-lift distribution can be expressed as a Fourier series of the form [11]

bL^~ (θ)/L = (4/π)[sin(θ) + Σ^∞_n-2 B_nsin(nθ)]; θ = cos^-1(-2z/b) (1)

where b is the wingspan, L^~ is the local wing section lift, L is the total wing lift, z is the spanwise …

Weber Basin Water Conservancy District Bottom-Up Climate Vulnerability Study Using Riverware, Jacob Everitt

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

With so much uncertainty of what the future has in store for us, how can we prepare for what lies ahead? The Weber Basin Water Conservancy District (WBWCD) needs to know how they can best prepare for future climate changes and future growth, and where their water system is vulnerable. A bottom-up approach can be used to consider how factors and subfactors effect the vulnerability of their water system's storage and delivery. This approach is accomplished with the use of RiverWare, an advanced water system modeling program. Scenarios to represent the factors are as follows: range of future stream flows, …

Minimising Induced Drag With Weight Distribution, Lift Distribution, Wingspan, And Wing-Structure Weight, Warren F. Phillips, Douglas F. Hunsaker, Jeffrey D. Taylor

Mechanical and Aerospace Engineering Student Publications and Presentations

Because the wing-structure weight required to support the critical wing section bending moments is a function of wingspan, net weight, weight distribution, and lift distribution, there exists an optimum wingspan and wing-structure weight for any fixed net weight, weight distribution, and lift distribution, which minimises the induced drag in steady level flight. Analytic solutions for the optimum wingspan and wing-structure weight are presented for rectangular wings with four different sets of design constraints. These design constraints are fixed lift distribution and net weight combined with 1) fixed maximum stress and wing loading, 2) fixed maximum deflection and wing loading, 3) …

Optimization Of Aileron Spanwise Size And Shape To Minimize Induced Drag In Roll With Correlating Adverse Yaw, Joshua R. Brincklow

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Most modern aircraft make use of modifying the main wing in flight to begin a roll. In many cases, this is done with a discrete control surface known as an aileron. The lift, drag, and moments for the wing are affected in part by the location and size of the ailerons along the length of the wing. The lift, drag, and moments can be found using a lifting-line theory that considers the circulation in airflow from many small sections of the wing. To minimize the drag due to lift on the wing, the ailerons must be optimized for the best …

Formation Control Using Vehicle Operational Envelopes And Behavior-Based Dual-Mode Model Predictive Control, Brian Merrell

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis presents a control framework for formation control. Given an initial desired trajectory, a framework is presented to generate trajectories for each vehicle within the formation. When combined with an operational envelope, a designated area for each vehicle to maneuver, for each vehicle the multi-vehicle formation control problem can be redefined into a single vehicle problem. A single vehicle framework is presented to track the respective trajectory when possible, or stay near it when it passes through previously unknown obstacles. Arc-based motions are used to rapidly produce desirable robot controls while a trajectory tracking motion is used to ensure …

Venturi Flowmeter Performance Installed Downstream Of The Branch Of A Tee Junction, Benjamin G. Sandberg

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this research was to evaluate the influence of a tee junction on flow rate measurement of a Venturi flowmeter installed downstream of the branch of a tee. Accuracy in flow measurement is important to organizations where miscalculated flow rates can add up to be millions of dollars in either lost revenue, overcharges to the client, or improper system operation. This research used Computational Fluid Dynamics (CFD) to determine ratios by which the manufacturer’s straight-line calibrated C_d (discharge coefficient) can be adjusted to improve the accuracy of the flow measurement when the Venturi is installed on the …

Characterization Of Chinese Hamster Ovary Cell Performance With Pentanoic Acid And N-Acetyl Cysteine Treatment, Joseph Camire

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

To improve the cost of producing protein therapeutics manufacturers can attempt to increase the amount of protein produced per unit volume. Some small fatty-acids have shown the ability to increase protein concentrations in some manufacturing systems. An example system is in the industrially important cell line derived from a Chinese Hamster Ovary (CHO). A drawback of adding these fatty-acids is they can increase the rate of cell death.

A potential way to minimize the cell death rate, caused by adding fatty-acids, is to also add additional anti-oxidants. Through a series of studies, we demonstrate production with different fatty-acids, butanoic acid …

Trisiloxane Surfactant Adjuvants In Pollen, Autumn Slade

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Chemicals are often added to agricultural pesticide mixes to help increase the efficiency of the field spray solution, and one of the main groups of chemicals used for this purpose are trisiloxane surfactants (TSSs). Normally TSSs are considered non-toxic, but recent studies have shown TSSs to have negative impacts on organisms like honey bees. Though TSSs have recently been found in environmental sources like water, pollen, and beeswax, little is known about how TSSs behave in the environment or affects active ingredients, like pesticides.

To help determine the environmental prevalence and fate of TSSs, several studies were performed. Pollen was …

Pitched Baseballs And The Seam Shifted Wake, Andrew W. Smith

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

An experiment was conducted to investigate the effect that seams have on the way a baseball moves through the air. An examination of the airflow around a baseball led to the understanding that when seams are in certain areas on the baseball's surface the airflow changes. A subsequent experiment was performed which showed that when these changes in airflow were on one side of the baseball more than the other, the ball moved away from the side with the seams. This movement is in a different direction than the movement direction caused by a ball's spin. These experiments were done …

Novel Three-Dimensional Scaffold For Skeletal Muscle Tissue, Matthew H. Clegg

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Cells are traditionally grown on a flat, plastic surface that has been optimized for cell attachment. While this is appropriate for growing and maintaining cells, this two-dimensional cell culture model is not an adequate representation of a three-dimensional body. Creating three-dimensional lab models is an important step to model diseases and damage to the skeletal muscle system.

To create this three-dimensional environment, a plastic frame was designed to support silkworm fibers. Skeletal muscle cells were then grown along the silkworm fibers and the growth of these cells in a three-dimensional environment was compared to cells grown on a flat, two-dimensional …

Benchmarking Of A Mobile Phone Particle Image Velocimetry System, David Armijo

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

One of the most important tools in a fluid dynamics laboratory is a particle image velocimetry (PIV) system. This system can measure the speed of a fluid flow simply by taking high-speed images of the motion of the fluid, then applying PIV cross-correlation software to calculate speed from the resulting images. The mI-PIV project is in the process of designing a new method of performing PIV by putting the cross-correlation software on a mobile phone application, called mobile Instructional PIV (mI-PIV). This system is an innovative stepping stone in making PIV systems more widely available. It is designed to be …

Thermal Modeling And Analysis Of Roadway Embedded Wireless Power Transfer Modules, Arden N. Barnes

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Wireless charging of electric vehicles is a developing technology which potentially increases efficiency and safety. It also allows for charging vehicles while they are moving by having charging stations embedded in the roadway. Because roadways are thermally insulating, it is important to know how the heat from the charging stations will move through the roadway, which will allow further research into whether the heat will cause damage to the components in the station or to the roadway. This thesis studies the way the heat moves through concrete with wireless charging coils embedded in it. This is accomplished by measuring the …

Indoor Source Localization Of Radio Frequency Transmitters Using Blind Channel Identification Techniques, Madison L. Rose

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Locating transmitters is a research area that is becoming increasingly relevant as technology advances. It is especially useful for determining the location of livestock, drones, keys, phones, tablets, etc. As a result of this push for locating devices, many algorithms have been developed to determine source locations. Most source location algorithms and techniques rely on a "line of sight", or a direct path between the source and the receivers to provide accurate results.

Indoor environments pose a challenge to locating transmitters due to the many surfaces that allow radio waves to interact (reflect, refract, and generally distort) with them. Because …

Fluted Films Caused By Gravity Driven Water Drainage From Vertical Tubes, Matthew B. Jones

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

When a stationary mass of water in a vertical tube is suddenly released, it creates a variety of artistic shapes and behaviors as it escapes the tube exit. As the descending water accelerates in the tube, friction along the tube wall slows the outer radius, resulting in a moving film entrained on the tube that trails the main body of water. When this film exits the tube, surface tension, gravity, and inertia interact to cause the film to create a wide variety of shapes, including jets, tubes, water bells, champagne glasses, and bubbles; rich forms that appear in other natural …