Engineering Commons^™

Classical Venturi Meter Performance Downstream Of The Through Leg Of A Tee Junction, Matthew P. Day

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this research was to analyze the accuracy of a Classical Venturi meter installed downstream of the through leg of a tee junction. A flowmeter that functions inaccurately due to improper installation may cause revenue loss for any company or organization involved in extraction, transportation, production, or purchasing of fluid resources and products. This research used physical data coupled with data produced by numerical models to determine how to correct the Classical Venturi meter’s inaccuracies created by this particular installation.

Results show the capability of measuring the flow rate accurately was greatly affected when most of the flow …

The Effect Of Bit Depth On High Temperature Digital Image Correlation Measurements, Steven Robert Jarrett

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Digital Image Correlation (DIC) is a camera-based method of measuring mechanical displacement and strain which is commonly used in high-temperature experiments due to its ability to take contactless measurements. High-temperature DIC is challenging due to light emitted from the sample which can saturate the camera sensor. Blue-DIC and UV-DIC have been developed to minimize this effect, but the maximum sample temperature range of DIC remains a function of the camera and camera settings. Bit depth, also referred to as color depth or number of bits, is an important camera setting which affects the dynamic range of an image, but which …

Estimation Of High-Resolution Evapotranspiration In Heterogeneous Environments Using Drone-Based Remote Sensing, Ayman M. M. Nassar

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Evapotranspiration (ET) is a key element of hydrological cycle analysis, irrigation demand, and for better allocation of water resources in the ecosystem. For successful water resources management activities, precise estimate of ET is necessary. Although several attempts have been made to achieve that, variation in temporal and spatial scales constitutes a major challenge, particularly in heterogeneous canopy environments such as vineyards, orchards, and natural areas. The advent of remote sensing information from different platforms, particularly the small unmanned aerial systems (sUAS) technology with lightweight sensors allows users to capture high-resolution data faster than traditional methods, described …

Temperature Effect On The Mechanical Properties Of Steel Fiber Reinforced Ultra-High-Performance Concrete, Jenny Bernadette Gomes

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The contemporary innovation in concrete technology is ultra-high-performance concrete (UHPC). In this work, mechanical properties of UHPC are studied at ambient terrestrial temperature conditions. Specimens are prepared under laboratory environments maintaining the temperature of -25°C, -5°C, 15°C, 35°C, and 55°C. A freeze thaw chamber is utilized to condition the specimens at specified temperatures. Compressive strength, flexural strength, toughness, and modulus of elasticity are determined under varying temperature and steel fiber volume content. The results indicate that both temperature and steel fibers have effect on the mechanical properties of UHPC. The flexural and compressive strength show an opposite trend of strength …

Characteristic Of The Dynamics Of Disorder In Crystalline And Amorphous Materials, Amir Behbahanian

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This work provides the evidence to apply simulation methods that are applicable to systems with structural randomness to simulate crystalline materials at high temperatures. My work not only open the avenue to expand the simulation capability of materials but also provides insight to the physics of vibrations of atoms under different temperature and for different types of materials. I have also evaluated the reliability of Molecular Dynamics simulations at the frequency level and found that theses types of simulations, despite the previous belief, are reliable at low temperatures but up to a measurable frequency. In addition, the result of my …

Improvement Opportunities In The Two-Source Energy Balance Model For Et Using Uav Imagery And Point Cloud Information, Mahyar Aboutalebi

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In recent years, satellites and unmanned aerial vehicles (UAVs) provide enormous amounts of spatially-distributed information for monitoring crop conditions by measuring crop’s reflected and emitted radiation at a distance. However, applications of high-resolution UAV imagery and its intermediate products for improving crop water use estimates are not well studied. In other words, the available approaches, methods and algorithms for determining how much water to apply for irrigation using remotely sensed data have been mostly developed at satellite spatial resolutions. High-resolution imageries that have been achieved by small UAVs open new opportunities for revisiting, re-evaluating, and revising available crop water use …

Low Power Reconfigurable Antenna With Continuous Beam Steering Capability, Glendyn Darryn King

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Each year, the number of wireless devices increases, and the size of the devices’ data is increases, 8k video streaming, for example. More and more bandwidth is needed for wireless networks to meet these growing demands. Higher frequencies allow for more bandwidth; however, using higher frequencies comes with some trade-offs. The higher the wireless signal frequency, the shorter the distance it can travel before the signal strength becomes too weak for the receiver to pick it up. One solution might be to increase the power of the signal provider, but that would waste a lot of energy. Most antennas radiate …

Sensitivity Study For Uav Gps-Denied Navigation In Uncertain Landmark Fields, Samantha D. Burton

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This document provides two 2D simulation sensitivity analyses regarding a drone’s flight characteristic (state) errors within a GPS-denied region. The research focuses on a development and investigation of utilizing a camera to simultaneously determine a drone’s state while locating landmarks, where there is uncertainty in the landmarks’ exact positions prior to the mission (SLAM). This SLAM method is performed in regions with limited access to GPS. Furthermore, there is development and investigation of controlling the drone in conjunction with SLAM using potential error-reducing control parameters. Objectives are to quantitatively understand the UAV’s sensitivity of position errors to sensor grade and …

Impacts In Fluids: Forces, Scaling Laws And Bouncing Modes In Projectile Impacts On Water Pools And Droplets, Rafsan Rabbi

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Projectile impacts in quiescent water pool are synonymous with intriguing splash phenomena and rich underwater physics. Depending on the material property, geometry and surface conditions of the impacting projectiles coupled with the geometric properties of the water pool (e.g., depth, width etc.), contrasting events like sub-surface cavity formation or bouncing of macro-droplets unfolds over millimetric timescales.

In this dissertation, I present four different studies that look at different aspects of impact events with the help of high-speed imaging techniques and implementation of other sensory data acquisition instruments. Firstly, I look at the force of impact associated with projectile water entry …

Stochastic Lightning Damage Prediction Of Carbon/Epoxy Composites With Material Uncertainties, S.Z.H. Shah, Juhyeong Lee

Mechanical and Aerospace Engineering Faculty Publications

This study presents a novel stochastic modeling framework predicting lightning thermal damage in carbon/epoxy composites. The stochastic lightning damage model (SLDM) was developed with random distributions of composite’s electrical conductivity and void. The Box-Muller transformation was applied to generate random in-plane and through-thickness electrical conductivities with Gaussian distributions. The SLDM suggested that the predicted lightning thermal damage to carbon/epoxy composites increased slightly with the use of stochastic electrical conductivity, but the presence of voids did not significantly affect the damage development. The predicted size and shape of lightning thermal damage agreed fairly well with experimental results. In addition, the proposed …

Frequency-Dependent Linearity Characterization And Uncertainty Analysis Of The Pace Oci Short-Wave Infrared Detection Assembly, Kenneth Squire, Jacob Hedelius, James Peterson, Eric Gorman, Gerhard Meister

Space Dynamics Laboratory Publications

The Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) Ocean Color Instrument (OCI) will be used to collect data on the health of the planet’s oceans and atmosphere. Essential to OCI is its Short-Wave Infrared (SWIR) Detection Assembly (SDA), which measures light at discrete bands of interest. The linearity knowledge of the SDA detectors is crucial for collection of accurate and meaningful scientific data. This document presents the methodology employed in measuring the linearity response of the SDA to optical inputs at various modulation frequencies as well as the accompanying linearity uncertainty analysis.

Collaborative Research: Audio For Inclusion: Uncovering The Narratives Of Minoritized Students To Provide Insight To Faculty On The Known Unknowns Of Inclusion, Cassandra Mccall

Funded Research Records

No abstract provided.

Thermal Barrier Coating For Carbon Fiber-Reinforced Composite Materials, Heejin Kim, Jungwon Kim, Juhyeong Lee, Min Wook Lee

Mechanical and Aerospace Engineering Faculty Publications

Carbon fiber-reinforced plastic (CFRP) composites are widely employed in lightweight and high performance applications including supercars, aero-vehicles, and space components. However, although carbon fibers are thermally stable, the low thermal endurance of the matrix materials remains a critical problem in terms of the performance of the material. In this study, we proposed a new, Al₂O₃-based thermal barrier coating (TBC) for the CFRP composites. The TBC comprised α-phase Al₂O₃ particles with a mean diameter of 9.27 μm. The strong adhesion between the TBC and the CFRP substrate was evaluated using a three point bending …

Comparison Of Theoretical And Multi-Fidelity Optimum Aerostructural Solutions For Wing Design, Jeffrey D. Taylor, Douglas F. Hunsaker

Mechanical and Aerospace Engineering Student Publications and Presentations

As contemporary aerostructural research for aircraft design trends toward high-fidelity computational methods, aerostructural solutions based on theory are often neglected or forgotten. In fact, in many modern aerostructural wing optimization studies, the elliptic lift distribution is used as a benchmark in place of theoretical aerostructural solutions with more appropriate constraints. In this paper, we review several theoretical aerostructural solutions that could be used as benchmark cases for wing design studies, and we compare them to high-fidelity solutions with similar constraints. Solutions are presented for studies with 1) constraints related to the wing integrated bending moment, 2) constraints related to the …

Lightning Arc Channel Effects On Surface Damage Development On A Prseus Composite Panel: An Experimental Study, Dounia Boushab, Pedram Gharghabi, Juhyeong Lee, Thomas E. Lacy Jr., Charles U. Pittman Jr., Michael S. Mazzola, Alexander Velicki

Mechanical and Aerospace Engineering Faculty Publications

Composite aircraft structures are vulnerable to lightning strike damage due to their relatively low electrical and thermal conductivities. A preceding work has investigated the lightning damage resistance of a carbon-epoxy Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) panel. The damage includes intense local damage (i.e., matrix decomposition/sublimation, fiber rupture, delamination) accompanied by widespread surface damage (i.e., distributed fiber rupture and tow splitting) further from the lightning attachment point. This study focuses on investigating the cause of the widespread surface damage. Two possible driving mechanisms are explored: i) magnetically-induced currents and ii) lightning arc-root/channel expansion. …

Residential Water Meters As Edge Computing Nodes: Disaggregating End Uses And Creating Actionable Information At The Edge, Nour A. Attallah, Jeffery S. Horsburgh, Arle S. Beckwith Jr., Robb J. Tracey

Publications

We present a new, open source, computationally capable datalogger for collecting and analyzing high temporal resolution residential water use data. Using this device, execution of water end use disaggregation algorithms or other data analytics can be performed directly on existing, analog residential water meters without disrupting their operation, effectively transforming existing water meters into smart, edge computing devices. Computation of water use summaries and classified water end use events directly on the meter minimizes data transmission requirements, reduces requirements for centralized data storage and processing, and reduces latency between data collection and generation of decision-relevant information. The datalogger couples an …

A Mixed-Methods Approach To Explore Student Perceived Needs For Peer Mentorship In A College Of Engineering, Darcie Christensen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

“Nobody makes it alone. Nobody has made it alone” (NOVA SHRM & Dulles SHRM, 2012, p. 5). Mentoring generally has positive outcomes, such as increasing output, staying in work or school, increasing confidence, and others (Campbell & Campbell, 2007; Crisp & Cruz, 2009; Eby et al., 2008; NASEM, 2019; Pfund et al., 2016). This dissertation study focused on student perceived needs for peer mentorship in engineering, which can fill in gaps of traditional mentorship by pairing mentors and mentees at similar levels, increasing comfort and emotional support to mentees (Allen et al., 2017; Haggard et al., 2011; Kram & Isabella, …

Passive Cavity Deflation After Water Entry Facilitated By A Vented Tube, Emma R. Fraley

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

When an object enters water, a crater, or air cavity, can form around the object and remain attached as the object travels underwater. Cavities can be beneficial and reduce drag force but there may be times when the cavity needs to be removed. This research proposes a method to remove air cavities by letting air leave the cavity, deflating the cavity similar to how a balloon is deflated. To provide air a path to leave the cavity, a tube with vent holes is attached to the object. The vent holes are located near the object, where the air cavity forms, …

Venturi Meter Performance When Installed On The Branch Of A Tee Junction With Converging Run Flow, E. Elliot Naulu

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Venturi flow meters are often installed downstream of disturbances such as a tee junction, valve, or elbow. In such a case, a laboratory calibration may be needed to measure the Venturi meter’s performance under said limitations so that accurate metering is achieved. However, in some cases, laboratory calibration may not be possible.The purpose of this research was to investigate Computational Fluid Dynamics (CFD) ability to simulate a Venturi meter installed on the branch of a tee junction with converging run flow.

This study used CFD to compare against laboratory results to illustrate CFD’s capability as a calibration method. The results …

Development Of An Anisotropic Thermal Stress Model For A Low-Erosion Hybrid Rocket Nozzle System, Judson C. Stephens

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Hybrid rockets are rockets which employ a solid fuel grain with a liquid oxidizer. Hybrids have many promising potential applications, however they also have a few drawbacks. Of interest to this research is the increased rate of nozzle erosion inherent to hybrid rockets. In order to address this issue, a low-erosion nozzle is proposed and evaluated.

Evaluation Of Bioretention Performance In Northern Utah As A Function Of Media, Vegetation, And Loading, Trixie Rife

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Pollutants found in stormwater runoff are a growing environmental concern. The EPA has identified bioretention (BR) systems as a best management practice for the control of pollutants in stormwater runoff. BR systems reduce pollutant loads discharged to surface water bodies and to lower pollutant concentrations of water infiltrating into underlying groundwater. However, knowledge of the performance of BR systems in semi-arid Western climates is lacking. This study was conducted at three field sites in Northern Utah to evaluate the effectiveness of various natural and engineered media and various plant species on pollutant removal subjected to a range of pollutant loadings …

Concrete Maturity Method Applied To Rapid-Setting Calcium-Sulfoaluminate (Csa) Concretes For Pavement Repair Under Different Ambient Temperatures, Ryan Nicholas Langford

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

With more and more people using roadways the need for fast and efficient repair work is becoming increasingly important. Lane closures impede traffic flow and result in congestion. To further limit the amount of time lane closures are needed for repair work, calcium sulfoaluminate (CSA) cement concrete has become an increasing popular construction material for its ability to reach adequate strength requirements within four hours. Because of this accelerated repair time, advanced testing methods are needed to verify that the replaced concrete does indeed meet or exceed the minimum compressive strength requirements.

The maturity method is one test used to …

Surrogate Optimization Model For An Integrated Regenerative Methanol Transcritical Cycle, Yili Zhang

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In order to reduce the cost ($) per megawatts hour (MWh) of electrical energy generated by a nuclear power cycle with a novel small modular reactor (SMR), a new SMR-based nuclear power cycle with Methanol as working fluid was designed. It was built virtually with the Python & Coolprop software based on all components’ physical properties, and it is therefore called the physics-based model. The physics-based model would require seven user-defined values as input for the seven free design parameters, respectively. The physics-based model outcomes include LCOE (the cost per megawatts hour of electrical energy generated by the …

Methane Emission Treatment And Potential Upcycling Using Methylomicrobium Alcaliphilum, Jace Parkinson

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Anthropogenic methane emissions are harmful to the environment and can be difficult to treat. Use of M. alcaliphilum for bioremediation of methane looks to be one of the most promising methods of reducing the negative environmental impacts of methane emissions while simultaneously providing an economic incentive. Successful bioreactor design for M. alcaliphilum based methane treatment requires biokinetic constants and microbial growth information. Methods were established for determining biokinetic constants, including growth rate, biomass yield, specific methane consumption rate, and a correlation between methane oxidation and carbon dioxide production for M. alcaliphilum. Values determined for these constants were used to …

Alternative Doppler Extraction For Indoor Communication Signals, Thomas L. Bradshaw

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Radar is a common detection system for detecting the speed and velocity of moving objects. Radar is performed by transmitting a radio signal in the direction of a moving object and then processing the received reflected radio waves. The radar system processes the received signal to extract the Doppler frequency of the reflected waves, which reveals information about the velocity of the object. In traditional radar, the system uses one antenna for both the transmitter and the receiver.

In passive bistatic radar, the transmit antenna and receiver antenna are separated. In addition, the radar system has no control over the …

Navigation Performance Of Line/Plane Intersection Lidar Model In Conjunction With Opportunistic Feature Tracker, Michael R. Hansen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

With NASA awarding numerous contracts to build commercial lunar payload spacecraft and human lunar landers, the need for high precision navigation has increased. Traditional inertial navigation alone is not sufficient to autonomously land a vehicle on hazardous lunar terrain. Terrain relative navigation (TRN) systems have been explored in previous research that exploit camera observations of known landmarks. Such approaches require the flight electronics to correctly match features of the observed landmarks to an onboard database, in the drastically varying lighting conditions of moon. This paper explores the performance of a TRN system that does not rely on apriori landmark identification, …

Exploring Analytical Issues Associated With Oxidation Kinetics In Drinking Water, Shadi Haji Eghrari

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This dissertation contains two different section that pertain to two different subjects.

Section One (Haloamines): Disinfection with ozone and chlorine is critical in protecting the public and animals from pathogens in pools. Disinfection results in in the formation of haloamines from the unintended reactions of human and animal inputs and bromide/chloride with oxidants and disinfectants which cause health problems.

The purpose of this research was to examine the occurrence of haloamines during the chlorination of saltwaters. In this study, the effect of bromide concentration was observed to exert a significant effect on the stability of Haloamines, and with no bromide …

Development And Application Of A Decision Framework To Support Improved River Basin Water Management, Leah Meeks

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Water management decisions made at local levels may have effects throughout an entire river basin. Water managers need better ways to help identify which decisions have broader implications and to quantify those effects to inform decision making. This dissertation presents a framework providing a basin-wide approach to water management using three studies. The first study developed a software tool to quantify how local changes within a water resources network affect the entire network. A case study was conducted on the Lower Bear River in Utah. The second study quantified the basin-wide effects of reducing return flows from irrigation areas to …

Methods Development, Design Analysis, And Testing Of Novel Centrifugal Devices For Mammalian Cell Culture Harvest, W. Aaron Dryden

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Thermo Fisher Scientific is developing a centrifugal device to be used in the biopharmaceutical industry. The novel technology was used to remove cells from cell cultures, which produce drugs and medical treatments. The harvest process of removing cells is the first step towards product purification and is an important unit operation for ensuring high product yield. Since the device is a novel technology, methods to test and evaluate the performance of the centrifuge needed to be developed.

Successful testing methods were developed in this work and were implemented on over 30 different centrifuge designs. Amongst these many designs, different operating …

Investigating The Habits Of Mind Of Practicing Engineers, Theresa K. Green

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

One goal of undergraduate engineering education is to prepare students with the knowledge, skills, and decision-making strategies that are necessary for success in engineering practice. One proposed method to teach students these skills is to incorporate habits of mind into K-12 and undergraduate curricula. Habits of mind are the intelligent, social behaviors that engineers should aspire to have when solving problems, engaging with others, and dealing with uncertainty. Previous literature has suggested that incorporating ideas about habits of mind in educational curricula can teach students the disciplinary skills, technical knowledge, and social values that would help prepare them to enter …