Engineering Commons^™

Predicting Stochastic Lightning Mechanical Damage Effects On Carbon Fiber Reinforced Polymer Matrix Composites, Juhyeong Lee, Syed Zulfiqar Hussain Shah

Mechanical and Aerospace Engineering Faculty Publications

Three stochastic air blast models are developed with spatially varying elastic properties and failure strengths for predicting lightning mechanical damage to AS4/3506 carbon/epoxy composites subjected to < 100 kA peak currents: (1) the conventional weapon effects program (CWP) model, (2) the coupled eulerianlagrangian (CEL) model, and (3) the smoothed-particle hydrodynamics (SPH) model. This work is an extension of our previous studies [1–4] that used deterministic air blast models for lightning mechanical damage prediction. Stochastic variations in composite material properties were generated using the Box-Muller transformation algorithm with the mean (i.e., room temperature experimental data) and their standard deviations (i.e., 10% of the mean herein as reference). The predicted dynamic responses and corresponding damage initiation prediction for composites under equivalent air blast loading were comparable for the deterministic and stochastic models. Overall, the domains with displacement, von-Mises stress, and damage initiation contours predicted in the stochastic models were somewhat sporadic and asymmetric along the fiber’s local orientation and varied intermittently. This suggests the significance of local property variations in lightning mechanical damage prediction. Thus, stochastic air blast models may provide a more accurate lightning mechanical damage approximation than traditional (deterministic) air blast models. All stochastic models proposed in this work demonstrated satisfactory accuracy compared to the baseline models, but required substantial computational time due to the random material model generation/assignment process, which needs to be optimized in future work.

Identifying Fibre Orientations For Fracture Process Zone Characterization In Scaled Centre-Notched Quasi-Isotropic Carbon/Epoxy Laminates With A Convolutional Neural Network, Xiaodong Xu, Aser Abbas, Juhyeong Lee

Mechanical and Aerospace Engineering Faculty Publications

This paper presents a novel X-ray Computed Tomography (CT) image analysis method to characterize the Fracture Process Zone (FPZ) in scaled centre-notched quasi-isotropic carbon/epoxy laminates. A total of 61 CT images of a small specimen were used to fine-tune a pre-trained Convolutional Neural Network (CNN) (i.e., VGG16) to classify fibre orientations. The proposed CNN model achieves a 100% accuracy when tested on the CT images of the same scale as the training set. However, the accuracy drops to a maximum of 84% when tested on unlabelled images of the specimens having larger scales potentially due to their lower resolutions. Another …

A Network Flow Approach For Constellation Planning, Skylar A. Cox, Greg N. Droge, John H. Humble, Konnor D. Andrews

Space Dynamics Laboratory Publications

A graph-based network flow approach to constellation planning is presented that respects spacecraft resources and mission constraints to arrive at a preliminary operational schedule. The method discretizes task fulfillment opportunity windows into graph nodes and then adds edges based on feasibility of transition between these opportunities, either by slew maneuvers or extended-time task fulfillment during downlink operations. Intelligent graph pruning is applied to improve computation performance and provide a versatile planning capability with a minimal impact on the resulting solution. A network flow formulation allows for a simultaneous search for spacecraft plans using a Mixed Integer Linear Program (MILP). The …

Mission Operations, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

Overview

• In review – CONOPS

• Mission Planning

• Anomaly Resolution

• Miscellaneous, but important considerations

• Looking forward

Collaborative Research: Harnessing Mechanics For The Design Of All-Solid-State Lithium Batteries, Haoran Wang

Funded Research Records

No abstract provided.

Ground Support Equipment (Gse) Eat, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

About this Presentation

• This presentation was developed as a “taste” of the area of GSE
• There are lots of resources that can be found about GSE and how it should be used
• While I have tried to cover a lot of ground in this presentation, the GSE required for your mission will vary depending on your application
• My intent is to start the thinking process of how to design, develop, and execute GSE elements of your program so that you have a successful mission

Cuo Nanoparticles Solubility As Influenced By Soil Pore Water, Native Microorganisms, And Wheat Rhizosphere Chemistry In A Sand Matrix, Dakota Sparks

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Nanoparticles (NPs) are particles less than 100 nm (~4 millionths of an inch) in a direction. NPs, due to their small size, are used in a variety of products, such as silver (Ag) NPs as an antimicrobial in clothes. Copper Oxide (CuO) NPs are used in electronics as semiconductors and other fields as antimicrobials and purposefully or accidentally end up in the environment. Copper (Cu) is a necessary nutrient for plants, but at higher amounts is toxic to plants and beneficial soil microbes.

In order to understand how the CuO NPs interacts with plants, wheat seedlings were grown in sand …

Pedestrian Behavior At Signalized Intersections Throughout Utah, Sadie Boyer

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Pedestrians and vehicles interact with each other all over the world. Pedestrian-vehicle interactions are most likely to occur at intersections. One way to streamline these interactions and reduce the number of potential conflicts is by using traffic signals. Signalized intersections were developed to increase the overall safety and efficiency of movements involving motorists and, later, pedestrians (Clark, 2022). The number of signalized intersections is increasing across the country as vehicle volumes increase. This means that pedestrian-vehicle conflicts are also increasing. Pedestrian-vehicle conflicts can have serious, even fatal, consequences if not appropriately managed.

This study was a sponsored project by the …

Analysis Of Optically Transparent Antennas Designed From Different Transparent Conductors, Rakib Hasan

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This master’s thesis work presents an investigative study about the performance of transparent antennas. The antennas have been fabricated using two advanced transparent conductive films (TCF) namely Nano-C Hybrid and Silver-Nanowire (AgNW). Nano-C Hybrid is a new transparent conductive film which combines thin conductors like Carbon Nanotube and Silver Nanowire. The antennas made from Nano-C Hybrid and AgNW are of monopole types and are mounted on a ground plane made out of a printed circuit board and the antennas are excited using an SMA connector through that printed circuit board. Simulation works have been performed to find out the optimum …

Novel Patterning Techniques To Improve Digital Image Correlation In Challenging Environments, Weston Craig

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A camera-based measurement technique called digital image correlation (DIC) is beneficial to measure displacement and strain in challenging environments (such as post-irradiation evaluation and high temperature environments) due to its non-contacting nature and ability to obtain measurements over multiple length scales. This technique requires a surface pattern which influences the measurement resolution and accuracy of the measurements. This thesis explores two novel patterning techniques to allow the use of DIC in more challenging environments:

The first is to determine if a pattern created from printed text can be used as a pattern in DIC. Native patterns are patterns already present …

Effects Of Imu Sensor Location And Number On The Validity Of Vertical Acceleration Time-Series Data In Countermovement Jumping, Dianne Althouse

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Many devices are available for measuring the height of a CMJ. An inertial measurement unit (IMU) measures linear acceleration, orientation, and angular velocity. As an alternative to using IMU estimates of flight time, CMJ height could be estimated by integrating the IMU time-series signal for vertical acceleration to derive CMJ take-off velocity in order to track whole-body center of mass (WBCoM) movement, yet this approach would require valid IMU acceleration data. Thus, the purpose of this study was to quantify the effects of IMU sensor location and number on the validity of vertical acceleration estimation in CMJ. Thirty young adults …

Spacecraft Formation Flying Control Switching Surface Based On Relative Orbital Elements, Tyson K. Smith, John Akagi, Greg Droge

Space Dynamics Laboratory Publications

The development of a switching surface constraint based on the D’Amico relative orbital elements (ROE) is presented in this paper. Relative orbital elements give a more intuitive understanding of how the relative motion of a cluster of satellites changes with time and allows the control algorithm to take advantage of the natural dynamic motion. This work models each vehicle using a model predictive control (MPC) approach, based on the Hill-Clohessey-Whiltshire (HCW) equations, to plan maneuvers which are simulated using a high-fidelity motion model. An ROE based convex polytope switching surface is added to the MPC formulation to force the states …

Speed Of Small Droplets On Repellent Surfaces, Addison J. Litton

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A droplet of fluid can slide or roll down an angled surface if the droplet doesn’t stick to the plate (e.g., droplets on glass). The most common surface to allow for such this motion are hydrophobic surfaces. One example is a freshly waxed car where the rain beads up and rolls off. Another example is if a pan is heated to a high enough temperature then when small amounts of water are added the droplet will skitter around on the surface for a moment before boiling away. This high temperature effect where droplets rest on a vapor layer underneath cause …

High-Isolation Antenna Technique For Cubesat-Borne, Continuous-Waveform Radar, Logan E. Voigt

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Radar is important in target tracking, imaging, and weather prediction applications. As technology is increasingly miniaturized, there is a push for smaller radar. Research and exploration in outer space also benefit from small, low-power technologies. The NASA Jet Propulsion Laboratory’s RainCube was the first successful CubeSat-borne radar. A CubeSat is a type of small satellite that conforms to specific size and weight standards. Radar technology benefits from additional research on how to further miniaturize radar payloads.

Integrating the transmit and receive antennas on the solar panels removes the need for antenna-deployment mechanisms, preserving space on the CubeSat. This thesis also …

Sustain Water Conservation Behaviors Using Nonparametric Ranking And Social Marketing, Mahmudur Rahman Aveek

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Circulation of water use feedback and conservation messaging are strategies implemented to reduce water demand on a short-term (seasonal) basis. Often considered a less impactful strategy than other tactics such as price increments and usage restrictions, authorities mostly use feedback in informational campaigns with a focus to apprise users about their water use. Such conservation programs have had limited success that has been attributed to the fact that the information provided with the feedback campaigns was generic and did not motivate users enough to sustain their water-saving behaviors. However, the advent of disaggregation technologies that can provide appliance-wise water use …

Advancing The Cyberinfrastructure For Smart Water Metering And Water Demand Modeling, Nour A. Attallah

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

With rapid growth of urban populations and limited water resources, achieving an appropriate balance between water supply capacity and residential water demand poses a significant challenge to water supplying agencies. With the recent emergence of smart metering technology, where water use can be monitored and recorded at high resolution (e.g., observations of water use every 5 seconds), most existing research has been aimed at providing water managers with detailed information about the water use behavior of their consumers and the performance of water using fixtures. However, replacing existing meters with smart meters is expensive, and effectively using data produced by …

Using Computational Fluid Dynamics To Predict Flow Through The West Crack Breach Of The Great Salt Lake Railroad Causeway, Michael Rasmussen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The Great Salt Lake in Utah, USA, is a terminal, saline lake and is divided into two primary sections (northern and southern) by an east-to-west railroad causeway. Shortly after completion of the earth-fill causeway in the late 1950s, the two sections became dramatically different with differences in water surface elevation and water density. These differences cause the formation of a unique flow behavior commonly referred to as a density-driven exchange flow or bi-directional flow; a behavior observed in other lake and ocean settings where two fluids of differing densities interact. Measuring these exchange flows is a priority for lake managers …

Bugs Buy Steady Releases From Hydropower Producers To Encourage More Synergistic Reservoir Management, Moazzam Ali Rind

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Hydropower generated from dams has significant economic value, however, that value is achieved at the cost of native ecosystem devastation. Here, we have estimated loss in hydropower revenue due to inclusion of the steady low flow days –Bug Flow Experiments. We developed a linear optimization model and constraint method that restrict the number of steady low flow days while maximizes the hydropower revenue generation. The results suggested that increase in release volume will benefit both the objectives (win-win scenario), energy price differential between on-and off-peak periods controls the position and shape of tradeoff curves, and offset release does not have …

Highly Variable Rainfall-Runoff Patterns Across Burned Mountainous Watersheds In The Colorado River Headwaters, Haley Anne Canham

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Wildfires can contribute to enhanced flooding, erosion, debris flows, sediment transport, and water quality changes that impact downstream infrastructure, water users, and aquatic habitat. With increasing wildfire risk in the western U.S. due to a changing climate, understanding post-wildfire rainfall-runoff patterns and controls is critical for continued water resources security. To improve understanding of post-wildfire rainfall-runoff patterns and controls, we developed a transparent, repeatable analysis framework to collect precipitation and streamflow data, identify paired rainfall-runoff events, and analyze these events to evaluate post-wildfire rainfall-runoff patterns and controls. To automate the rainfall-runoff event identification, the Rainfall-Runoff Event Detection and Identification (RREDI) …

Fabrication And Testing Of Catalyst-Infused Filament For 3d Printing Of Ignition-Augmented Hybrid Rocket Fuels, Kurt C. Olsen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis describes and addresses the need for reliable ignition in small satellite hybrid propulsion systems using higher density oxidizers. It describes methods of creating custom 3D printing ABS plastic based filaments that contain small amounts of catalysts. These catalysts lead to a more reliable and energy-efficient ignition of a hybrid rocked propulsion system using catalyst-infused ABS and nitrous oxide and oxygen blend called Nytrox, commonly known as ”laughing gas.” The ”laughing gas” has a higher density and can therefore provide more ”miles per gallon” in a hybrid propulsion system on a small satellite when compared to gaseous oxygen (GOX). …

Passage Probability Of Woody Debris Elements And Accumulations At I- And V-Shaped Rock Weirs, Kathryn Margetts

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The transport and accumulation of driftwood or large woody debris (LWD) in mountain streams is a natural part of catchment health and river connectivity. At hydraulic structures, the presence of LWD may impact flow efficiency and influence upstream water depth. LWD has been studied at a variety of spillways and weir types, however, little is known about its interaction at rock weirs. This study investigated factors affecting the passage of individual LWD elements and any LWD accumulations at rock weirs, as well as potential impacts upstream of LWD accumulations through field-informed scaled model testing. Observations of LWD at rock weirs …

Upstream Methods For Enhancing Engineered Curcumin Biosynthesis, Caleb D. Barton

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Curcumin is a bright orange compound with myriad applications for human health and wellness. Curcumin occurs naturally in the plant Curcuma longa (commonly known as turmeric) but must be extracted from the roots in an environmentally unfriendly fashion to obtain commercially relevant amounts of the compound. In addition, extraction of curcumin from turmeric spice yields a mixture of various curcuminoids, presenting an issue for isolating it in its pure form and complicating its use in clinical settings.

Heterologous biosynthetic production of curcumin in Escherichia coli has been used extensively as a viable alternative to plant extraction but suffers from poor …

Multidisciplinary Reference Solutions For Performance-Optimized Aircraft Wings With Tailored Aerodynamic Load Distributions, Jeffrey D. Taylor

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Morphing wings, or wings that can change shape during flight, have the potential to substantially reduce the amount of fuel consumed by an aircraft over the course of its flight. However, the extent to which these wings can reduce fuel consumption depends on the design of the wing, including its aerodynamic efficiency and its structural layout, and how the aircraft flies, including its flight altitude and speed. Correctly predicting how these design and operational characteristics interact is critical to predicting how wing morphing may affect aircraft fuel consumption. Many computer prediction tools exist that include the effects of these interactions, …

Lentiviral Vector Production At High Cell Density By Transient Transfection Of Suspended Culture Hek Cells, Jacob G. Accordino

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Viral vectors are gene carriers that efficiently deliver therapeutic gene constructs to target cells. Viral vectors are frequently produced in suspension-growing cells of mammalian origin, referred to as packaging cells. Lentiviral vectors have become widely used as gene vectors since they were initially developed two and a half decades ago, particularly in research settings. The advantages of lentiviral vectors for treating diseases of genetic origin have driven research into their large-scale manufacture for clinical settings. Currently, three main challenges exist that limit mass production of lentiviral vectors. First, plasmid DNA used in the production process is very expensive. Second, high …

Control Mapping Methodology For Tailless Morphing-Wing Aircraft, Zachary S. Montgomery

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Advanced aircraft designs tend to have several control surfaces or devices that affect the flight of the aircraft. It is difficult or even impossible for a pilot to directly control each of these devices and fly the aircraft well. Therefore, a control mapping logic is needed to take typical pilot commands and map them to what the control devices should do to achieve the pilot’s commands. This work presents a methodology for determining this control mapping logic using two different approaches. The first uses a theoretical approach based on lifting-line theory, while the second leverages computational methods. The methodology consists …

Ground Station Eat, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

Ground Components

Two primary subsystems

•Ground Station(s)

•  May be your own or commercial
• Includes radio(s), antenna(s), rotor, etc.
• Heavily intertwined with satellite communications system
• Influences link budget

•Ground data system

• Your command, control, and telemetry interface
• Operator facing tools
• Front end processor
• Includes computer(s), networking equipment, displays, software tools, etc.
• Directly links to your ground station via network

•Additional ground subsystems could include:

• Payload ground (i.e. optical ground terminal)
• Space comm networks (i.e. Iridium)

Schlieren Techniques For Observations Of Long Positive Sparks: Review And Application, Junjia He, Xiankang Wang, Xiangen Zhao, Juhyeong Lee, Yaping Du, Xiaopeng Liu, Quan Gan, Yang Liu, Yuqin Liao

Mechanical and Aerospace Engineering Faculty Publications

Understanding the mechanism of positive leader discharge is important in lightning protection engineering and the external insulation design in high voltage power transmission systems. During the propagation of a positive leader, some processes without light-emitting, for example, the insulation recovery process after the breakdown, cannot be observed by optical photography techniques. With the combination of the digital high-speed imaging system, the conventional Schlieren techniques offer new vistas in the long air gap discharge observation. The important features of high spatial resolution, high sensitivity, and easy arrangement make Schlieren techniques powerful and effective tools for characterising the discharge processes without light-emitting. …

Adcs Hardware, Space Dynamics Laboratory

Space Dynamics Laboratory Publications

Subsystem Overview

• ADCS
• Fundamental Modes

Sensors

• Magnetometer
• Gyroscope
• Sun Sensors
• Star Tracker
• GPS Receiver
• Design/Build of Sensors

Actuators

• Passive Magnetics
  
• Torque Coils/Rods
• Reaction Wheels
• Reaction Wheel Physics
• Control Moment Gyros
• Thrusters

Requirements

• Overview
• Components
• Requirement Drivers
• Requirement Flow
• Error Stackup

Dependencies

• Moving Parts
• Keep outs
• Vehicle Geometry
• Power/Data Impacts
• Magnetics

Analysis

• First Checks
• Simulation

Testing

• Polarity
• Reduced System
• Integrated System
• Conclusion

Collaborative Research: Expedite Csi Processing With Lightweight Ai In Massive Mimo Communication Systems, Rose Hu

Funded Research Records

No abstract provided.

Aerodynamic Effects Of Phase Offset Between Synchronized Propellers In Hover, Nathan Welker, Daniel Maynes

Utah Space Grant Consortium

Emerging advances in electric-propulsion technology are enabling aircraft to use distributed electric propulsion (DEP) to increase efficiency and maneuverability. The implementation of DEP effectively decreases the spacing between propellers, introducing complex aerodynamic interactions that are not well understood. This study presents the use of stereoscopic particle image velocimetry (SPIV) to obtain 3D velocity measurements of the flow fields of phase locked and synchronized propellers at close proximity in a side-by-side configuration. These experiments were performed to explore the aerodynamic effect of phase offset between the propellers. It was found that while the propeller interactions cause an induced upwash and a …