Engineering Commons^™

Tailoring Physical Properties Of Shape Memory Polymers For Fdm-Type Additive Manufacturing, Paulina Aileen Quinonez

Open Access Theses & Dissertations

Shape memory polymers (SMPs) have found applicability in biomedical settings as well as other uses that can take advantage of objects that can change shape upon exposure to stimulus. Integrating polymers with shape memory characteristics into additive manufacturing technologies such as fused deposition modeling (FDMâ?¢) can increase the number of applications this manufacturing platform can be utilized. Currently, polyurethane and polylactic acid (PLA) are two FDMâ?¢-compatible materials that possess shape memory properties. On their own these materials do not have tunable shape memory properties, namely shape recovery and shape fixation. The work presented here entails the development and characterization of …

Artificial Intelligence In The Assessment Of Transmission And Distribution Systems Under Natural Disasters Using Machine Learning And Deep Learning Techniques In A Knowledge Discovery Framework, Rossana Villegas

Open Access Theses & Dissertations

Warming trends and increasing temperatures have been observed and reported by federal agencies, such as the National Oceanic and Atmospheric Administration (NOAA). Extreme-weather events, especially hurricanes, tornadoes and winter storms, are among the highly devastating natural disasters responsible for massive and prolonged power outages in Electrical Transmission and Distribution Systems (ETDS). Moreover, the failure rate probability of any system component under extreme-weather tends to increase in the impacted geographic area. This Dissertation proposes an Artificial Intelligence (AI) Decision Support System that can predict damage in the ETDS and allow operators to mitigate disastrous extreme weather events. The document reports the …

Towards Analytical Techniques For Systems Engineering Applications, Griselda Valdepeñas Acosta

Open Access Theses & Dissertations

One of the main objectives of systems engineering is to design, maintain, and analyze systems that help the users. To design an appropriate system for an application domain, we need to know: what are the users' desires and preferences (so that we know in what direction we should aim to change this domain), what is the current state and what is the dynamics of this application domain, and how to use all this information to select the best alternatives for the system design and maintenance. Designing a system includes selecting numerical values for many of the parameters describing the corresponding …

Cmas/Volcanic Ash Infiltration Performance Of Yttria Rich-Zirconia Thermal Barrier Coatings Produced By Electron Beam Physical Vapor Deposition, Juan Jose Gomez Chavez

Open Access Theses & Dissertations

For many years the use of thermal barrier coatings (TBC) in gas turbine engines has allowed a significant increase in engine operating temperatures which are above the Ni-based super alloys' melting point. The base material for TBCs is the state of the art 7 wt % yttria stabilized zirconia (YSZ) which provides the thermal protection. Current industry demands for increased engine efficiency has pushed TBCs to the limits where significant technological constrains have been identified. One of the main ones represents the high temperature corrosion of the TBC material due to the ingestion of silicate based airborne particles commonly referred …

Image Analysis For Lung Cancer Diagnosis And Superresolution Localization Microscopy, Xia Huang

Open Access Theses & Dissertations

With the development of imaging analysis techniques, flurry of applications associated with it has been hatched. In this paper, image analysis on both organ and cellular levels will be demonstrated. For organ level images, a deep learning based computer aided lung cancer diagnosis based on computer tomography images is studied. Deep learning techniques have been extensively used in computerized pulmonary nodule analysis recent years. Many reported studies still utilized hybrid methods for diagnosis, in which convolutional neural networks (CNNs) are used only as one part of the pipeline, and the whole system still needs either traditional image processing modules or …

Structures And Daq System For The Lox/Lch4 500 And 2000 Lbf. Rocket Engines, Rachel Pilgrim

Open Access Theses & Dissertations

With the progression of space exploration and research, new alternative fuels and fuel combinations have been discovered. The ability to produce methane from Mars' atmosphere and oxygen from Mars' regolith has led to the two becoming a great alternative propellant combination for rocket propulsion systems. To further advance LOX/LCH4 propulsion systems, a 500 and 2000 lbf rocket engine were designed and manufactured and are to be launched from the MIRO cSETR Technology Research and Innovation Acceleration Park (tRIAc) in Fabens, Texas for data collection and analysis. The objective of this thesis is to give a thorough overview of the static …

Structural Design Of Complex Components, Armando Antonio Ochoa

Open Access Theses & Dissertations

The University of Texas at El Paso (UTEP) and the Center for Space Exploration and Technology Research (cSETR) is determined to develop a launch vehicle that is made completely of additive manufacturing materials, has the capability to transport a 100 lb payload to low earth orbit (LEO) as well as completing the design of a strucutral steel mobile launch stand that has the capability of withstanding the launch vehicle's static and dynamic loadings. The project will consist of carbon composite components to reduce weight while maintaining efficiency, strucutral steel components to resist extreme loadings and maintain strucutral shape, and lastly …

Exploration And Optimization Of Biomaterials And Cells Required For The Fabrication Of A "Cardiac Patch", Shweta Anil Kumar

Open Access Theses & Dissertations

Cardiac failure induced by myocardial infarction is believed to be one of the primary causes of morbidity and mortality all over the world. Affecting more than 26 million people worldwide, its prevalence has been observed to increase steadily. Myocardial infarction, which intitially begins as the occlusion of of a coronary artery, results in the death of millions of cardiomyocytes by obstructing blood flow to the serviced regions of the myocardium. The dead myocardium is replaced by a dense,collagenous scar which reduces the contractility of the heart, gradually leading to heart attacks. Most of the existing treatment therapies are palliative in …

Quantifying Early-Age Concrete Mechanical Properties And Curing Conditions Utilizing An Automated System, Benjamin Arras

Open Access Theses & Dissertations

The validation of concrete quality based on the 28-day strength is a lengthy process. Predicting concrete mechanical properties through early-age methods can streamline the construction process. Early-age concrete behavior consists of assessing the concrete curing as-related to setting stages, the hydration process, strength and stiffness development, while considering various environmental system parameters. This paper reports on a nondestructive method for observing the early-age strength and modulus development of concrete mixes over seven days in a controlled, laboratory setting. An apparatus was designed and built for continuous acquisition of seismic modulus data (using free-free resonant column) and heat of hydration/maturity information …

Bioprinted Mcf7 Breast Cancer Cells, An In Vitro Model For Drug Discovery, Aleli Campbell

Open Access Theses & Dissertations

Current breast cancer treatments are successful in eradicating this disease in the majority of patients, though there are quite a few cases where relapse or recurrence follow, which may lead to continued cancer therapy or death. Thermal inkjet bioprinting (BP) is a novel technique that is used to bioprint biomaterials or diverse cellular organisms to engineer tissue or organ models in vitro. In this Dissertation, we investigated the molecular effect of BP MCF7 breast cancer cells (BCC), cell survival of the cells when exposed to FDA approved systemic therapy alone and in combination with radiation and lastly, the ability of …

A Modified Wilshire Model For Creep Deformation And Damage Prediction, Jaime Aaron Cano

Open Access Theses & Dissertations

In this work, a new constitutive model, the WCS model, is derived that combines the Wilshire equations with continuum damage mechanics (CDM) for the long-term prediction of creep deformation, damage, and rupture. Long-term creep data is expensive and time-consuming to obtain because conventional creep testing is real-time. There is a need to extrapolate long-term creep behaviors from short-term data. Models that can accurately predict long-term creep behavior over a wide range of boundary conditions are vital for design engineers. The classic Wilshire equations can accurately extrapolate the long-term stress-rupture, minimum-creep-strain-rate, and time-to-strain of various alloys as their functional form has …

Assessing Spatiotemporal Exposures To Transportation Pollutants In Near-Road Communities Using Aermod, Mayra Consuelo Chavez

Open Access Theses & Dissertations

Traffic-related air pollution has a profound impact on human health especially for residents living in near-road communities which are constantly exposed these air pollutants. A near-road community is expected to observe significant spatial and temporal variations in pollutant concentrations, as air pollution resulting from emissions from major highways decreases rapidly from the highway. This research conducted on-site traffic and air quality measurements on four critical transportations related air pollutants, PM2.5, PM10, NO2, O3, as well as emission and air dispersion modeling of transportation emission impacts in a near-road community. Using numerical models provided by the EPA, integrated with field measurements …

A Method For Iron Determination During Copper Electrometallurgy And Its Application To The Calculation Of Current Efficiency, Daniel Pedro Cruz

Open Access Theses & Dissertations

With the objective of developing statistical models that describe iron kinetics under typical copper electrolytes as well as its effects on current efficiency and influence in cathodic and anodic behavior, a detailed electrochemical analysis is done in this work as a contribution to implement hydrometallurgical processes in the refining or winning process to produce high purity copper.

This Thesis evaluates the oxidation-reduction potential (ORP) of the Fe3+/Fe2+ couple in the H2SO4-Fe2(SO4)3-FeSO4-H2O and H2SO4-CuSO4-Fe2(SO4)3-FeSO4-H2O systems, with addition of different copper concentrations and temperatures up to 70°, typically employed in the industry. This study further validates and expands a thermodynamic expression developed …

Development Of An Ionic Green Monopropellant 1 Newton Thruster For Small Satellite Application, Jaclyn Mona Mejia

Open Access Theses & Dissertations

In effort to advance green monopropellant propulsion using AF-M315E, a 1N thruster was developed to demonstrate the propellant capabilities for low thrust requirement missions. The current study presents the development of a 1 Newton thruster. The thruster was designed based on available literature for initial parameters. In house developed catalyst was packed into the 1 Newton thruster, and mounted onto a thrust stand for testing. Two configurations of catalyst were used for this testing campaign. As a result, temperature peaks from AF-M315E decomposition gases reached up to 1400°C with an iridium loading factor of 25% by mass with both catalyst …

Platelet Biology And Thrombosis: Juul E-Cigarette Exposure And 5ht2a Receptor Drug Discovery, Jean Emmanuel Montes Ramirez

Open Access Theses & Dissertations

x

The Drones' Impact On Precision Agriculture, Ibrahim Naji

Open Access Theses & Dissertations

A study to assess the overall impact of drones in the agricultural sector. The specific goal of this research was to provide a drone system to ward off pestering birds from crops to allow for better growth and an increased yield. Along with providing a user-friendly coded drone system for farmers that is cost effective, this project has inspired other areas of use for the drone.

Hfo Detector Based On Eeg Mean Energy Change Detection, Raul Ontiveros

Open Access Theses & Dissertations

The main goal of this work is to support automated seizure prediction by identifying preictal states using multiple detectors of high-frequency oscillations (HFOs). Assessment of HFOs from a seizure onset zone may be facilitated using automatic HFO detectors. However, studies have shown that HFOs can be generated by physiological or pathological brain processes. Distinguishing between pathological and physiological HFOs is challenging due to a lack of discriminant information in signals' morphology and other characteristics. Other complicating factors include a lack of consistency in definitions of HFO frequency ranges, the need for expert verification of HFO detection, and lack of robustness …

Magnetic Nanoparticles For Hyperthermia For Cancer Treatment, Bianca Paola Meneses Brassea

Open Access Theses & Dissertations

Fe3O4 and NixCu4-x magnetic nanoparticles were synthesized using supercritical conditions of liquids and wet chemistry, respectively. Characterization methods (VSM, SEM, TEM, and magnetic hyperthermia) yielded results that prove feasibility for magnetic hyperthermia for cancer treatment.

Development Of An Iridium-Ceramic Substrate Catalyst Bed For The Decomposition Of Ionic Green Liquid Monopropellants, Alejandro Andre Vazquez

Open Access Theses & Dissertations

In an effort to advance green monopropellant propulsion using ionic liquids, the Center for Space Exploration and Technology Research (cSETR) has developed a pellet based catalyst bed for the decomposition of AF-M315E. The present paper will go over some of the fundamental research conducted towards the development of a catalyst bed and some of its applications. Three different catalyst bed designs were produced where each uses a different ceramic substrate material. The three different substrates are aluminum oxide, tungstated zirconia, silicon carbide each coated with iridium as the catalyst material. An experimental setup for testing the catalytic decomposition AF-M315E was …

Thermal Characterization Of Abs/Carbon Fiber, Abs/ Glass Fiber And Petg/Glass Fiber Reinforced Composites Used In Large Area Additive Manufacturing, Fernando Adrian Rodriguez Lorenzana

Open Access Theses & Dissertations

Additive manufacturing has seen continuous advancements, such as the inclusion of large-area additive manufacturing extrusion systems. These systems precede small-scale 3D printing by means of research and technological development for the manufacturing of plastic and fiber industries. Big Area Additive Manufacturing (BAAM), a material extrusion process, is capable of 3D printing large parts using thermoplastic composites by adding fiber reinforcements. The incorporation of fibrous materials, carbon fiber (CF) or glass fiber (GF), is a common practice in which percentage nominal ratios of fiber reinforcement by weight are implemented to the polymer matrix. In general, this enables warpage reduction during printing, …

Processing, Structure And Mechanical Behavior Of Advanced Engineering Steels, Bing Yu

Open Access Theses & Dissertations

The concept of low lattice misfit and high-density of nanoscale precipitates obtained through solution treatment was adopted to obtain ultrahigh strength maraging steel without compromising elongation. An "ultrahigh strength-high toughness" combination was successfully obtained in 19Ni3Mo1.5Ti maraging steel with ultimate strength of ~1858 MPa and static toughness of ~110 MJ·m-3. Maraging steel had extremely high density (2.3Ã?1024 m-3) of nanoscale precipitates with minimum lattice misfit of less than 1% at the solutionization temperature of 820 oC. Two kinds of nanoscale precipitates, namely, η-Ni3(Ti,Mo) and B2-Ni(Mo,Fe) contributed to ultrahigh strength. The size of nanoscale precipitates governed the movement of dislocations, cutting …

Cfd Dem Analysis Of A Dry Powder Inhaler, Antara Badhan

Open Access Theses & Dissertations

Dry powder inhalers (DPIs), used as a means for pulmonary drug delivery, typically contains a combination of an Active Pharmaceutical Ingredient (API) and significantly larger carrier particles. The micro-sized drug particles - which have a strong propensity to aggregate and a poor aerosolization performance - are mixed with significantly large carrier particles that are unable to penetrate the mouth-throat region to deagglomerate and entrain the smaller API particles in the inhaled airflow. The performance of a DPI, therefore, depends on entrainment the carrier-API combination particles and the time and thoroughness of the deagglomeration of the individual API particles from the …

In Situ Selective Nitriding Using An Open Source Laser Powder Bed Fusion System, Andres Gerardo Navarro

Open Access Theses & Dissertations

Conventional forms of nitriding titanium limit the locations to surfaces, limiting applications to simple coatings. Additive manufacturing methods provide the opportunity for surface coating methods to be utilized in a layer by layer fabrication method and increase the uses of nitrides. Laser powder bed fusion (LPBF) in particular, provides a fabrication environment with sufficient energy to allow for material nitriding as well as the flexibility of being able to utilize a variety of materials and shielding gases for processing. This project utilizes an AconityONE open source LPBF system with custom laser parameter settings to fabricate and nitride Ti-6Al-4V substrates. This …

Material Characterizations Of Organic-Inorganic Halide Perovskites Using Various Deposition Techniques For Planar Perovskite Solar Cell, Shaimum Shahriar

Open Access Theses & Dissertations

Organic-inorganic halide perovskites have rapidly become emerging materials for photovoltaic applications. Strong characterization methods are needed to fully comprehend the chemistry and composition of perovskite solar cells. Understanding the interaction between layers inside a cell and how they react with the environment is important to achieve optimum manufacturing processes, and improve the efficiency of perovskite solar cells. The present work demonstrates the material characterizations of organic-inorganic halide perovskites using (i) one-step deposition, (ii) two-steps deposition, (iii) solvent-to-solvent extraction, and (iv) mixed-cation solution processing. Investigations by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and scanning electron microscopy (SEM) have been undertaken …

Numerical Investigation Of Molten Metal Infiltration And Pillared Cooling Systems At Microscale, Shaikh Tanveer Tanveer Hossain

Open Access Theses & Dissertations

Flow-through porous media at pore-scales is one of the less explored sides of fluid mechanics due to the complexity associated with highly irregular pore geometry. Most of the established methods that try to quantify such flow are based on statistical observations of flow through numerous porous specimens. Such understandings may satisfy the need for applications where micro-level details are not a concern. Some numerical approaches did try to analyze the micro-level flow, but the analysis was confined to small sample sizes due to the intensive computation challenge. There are several applications of porous media flow where analyzing the large-scale flow …

Additive Manufactured Ear Pinna For Spatial Cue Preservation In Custom Hearing Devices, Carlos Felipe Acosta Carrasco

Open Access Theses & Dissertations

Advancements in additive manufacturing/3D printing technologies has permitted the fabrication of intricate features such as the ones present in the human ear. The outer ear, also known as the pinna, allows for the spectral cues from incoming sound to be captured and identified. The hypothesis of the preservation of auditory localization and externalization relies on the fabrication of an ear pinna via additive manufacturing embedded into a headset for spectral cue preservation and hearing protection. Before exploring these custom circumaural hearing devices, a study on the fabrication process of AM pinnae was performed. The KEMAR system for acoustic research was …

Formulation And Implementation Of Iterative Method For Generating Spatially-Variant Lattices, Manuel Fernando Martinez

Open Access Theses & Dissertations

The use of a matrix-free, memory-efficient approach to generate large-scale spatially variant lattices (SVL) was explored. A matrix-free iterative SVL generation algorithm was formulated and then implemented with a tremendous memory reduction observed. The algorithm consists of solving first-order central finite-differences along the entirety of the problem space point-by-point to obtain the grating phase function Φ(𝑠⃗) to which all desired spatially variant lattice properties are applied to. The algorithm was studied to identify key areas of data and task parallelism to exploit in heterogeneous computing systems consisting of clusters of central processing units (CPU) and graphics processing units (GPU) combinations. …

Segmentation And Registration Based Automatic Cancer Proton Treatment Analysis, Yang Zhang

Open Access Theses & Dissertations

Due to its low side effects, proton therapy is rapidly developing around the world. However, the time and labor it takes to deliver the treatment have prevented widespread use in the clinic setting. For this reason, an automatic proton treatment analysis system is needed to improve efficiency during the treatment process.

The challenge lies in improving the accuracy and speed of the current proton treatment analysis system. The Range shifter correction factor is considered the same value under any given condition in our treatment system. This approximate algorithm limits the accuracy of the proton treatment analysis system. In addition, medical …

Potential Of Nanoscale Elements To Control Fusarium Wilt Disease In Tomato (Solanum Lycopersicum), Enhance Macronutrient Use Efficiency, And Increase Its Yield, Ishaq Olarewaju Adisa

Open Access Theses & Dissertations

Nanotechnology has a great potential in ensuring food production, security and safety globally. Over the past decade, research on the use of nanomaterials to supply nutrient elements and protect plants from pest and diseases has significantly increased. Tomato (Solanum lycopersicum) is one of the most consumed vegetables in the world and United State is one of its largest producers globally generating billions of dollars annually in revenue.. Tomato plants are affected worldwide by Fusarium wilt caused by Fusarium oxysporum f. sp. Lycopersici. There is growing concern about excessive use of conventional pesticides in controlling Fusarium and other diseases in tomato …

Computer-Aided Classification Of Impulse Oscillometric Measures Of Respiratory Small Airways Function In Children, Nancy Selene Avila

Open Access Theses & Dissertations

Computer-aided classification of respiratory small airways dysfunction is not an easy task. There is a need to develop more robust classifiers, specifically for children as the classification studies performed to date have the following limitations: 1) they include features derived from tests that are not suitable for children and 2) they cannot distinguish between mild and severe small airway dysfunction.

This Dissertation describes the classification algorithms with high discriminative capacity to distinguish different levels of respiratory small airways function in children (Asthma, Small Airways Impairment, Possible Small Airways Impairment, and Normal lung function). This ability came from innovative feature selection, …