Engineering Commons^™

Applicability Of A Flood Forecasting System For Nebraska Watersheds, Sinan Rasiya Koya, Nicolas Velasquez Giron, Marcela Rojas, Ricardo Mantilla, Kirk Harvey, Daniel Ceynar, Felipe Quintero, Witold F. Krajewski, Tirthankar Roy

Department of Civil and Environmental Engineering: Faculty Publications

Accurate and timely flood prediction can reduce the risk of flooding, bolster preparedness, and help build resilience. In this study, we have developed a flood forecasting system prototype and checked its potential for carrying out operational flood forecasting in the state of Nebraska. This system builds upon some of the core components of the Iowa Flood Information System (IFIS), which is a state-of-the-art platform widely recognized around the world. We implemented our platform on a pilot basin in Nebraska (Elkhorn River basin) by installing eight stream sensors and setting up the hydrologic model component of IFIS, i.e., the Hillslope Link …

Inter-Wythe Slip Design Criteria For Non-Composite Insulated Walls, Abdelrahman Awawdeh, Fray F. Pozo-Lora, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Non-composite insulated wall connector design is governed by ICC-ES AC320. This standard works entirely in the loading domain, asking the engineer to prevent connector failure due to tension and shear loading. In this paper, the authors discuss additional criteria related to thermal loading and out-of-plane wind loading that create displacement demand in the non-composite connectors. Loads suitable for such analyses are not well defined. Loads are assumed and demonstrated herein and shown to cause significant displacement demand on connectors. Limited non-composite wythe connector testing is available, and some results are presented here. A comparison indicates that outright failure of non-composite …

Relationships Between Residence Characteristics And Nursing Home Compare Database Quality Measures, Brian J. Puckett, Erica E. Ryherd, Natalie Manley, Carey S. Ryan

Durham School of Architectural Engineering and Construction: Faculty Publications

Objective: This study evaluated relationships between physical characteristics of nursing home residences and quality-of-care measures.

Design: This was a cross-sectional ecologic study. The dependent variables were 5 Centers for Medicare & Medicaid Services (CMS) Nursing Home Compare database long-stay quality measures (QMs) during 2019: percentage of residents who displayed depressive symptoms, percentage of residents who were physically restrained, percentage of residents who experienced 1 or more falls resulting in injury, percentage of residents who received antipsychotic medication, and percentage of residents who received anti-anxiety medication. The independent variables were 4 residence characteristics: ownership type, size, occupancy, and region …

Plasmon Enhanced Quantum Properties Of Single Photon Emitters With Hybrid Hexagonal Boron Nitride Silver Nanocube Systems, Mohammadjavad Dowran, Andrew Butler, Suvechhya Lamichhane, Adam Erickson, Ufuk Kilic, Sy_Hwang Liou, Christos Argyropoulos, A. Laraoui

Department of Mechanical and Materials Engineering: Faculty Publications

Hexagonal boron nitride (hBN) has emerged as a promising ultrathin host of single photon emitters (SPEs) with favorable quantum properties at room temperature, making it a highly desirable element for integrated quantum photonic networks. One major challenge of using these SPEs in such applications is their low quantum efficiency. Recent studies have reported an improvement in quantum efficiency by up to two orders of magnitude when integrating an ensemble of emitters such as boron vacancy defects in multilayered hBN flakes embedded within metallic nanocavities. However, these experiments have not been extended to SPEs and are mainly focused on multiphoton effects. …

Design Of Wythe Connectors For Concentrated Out-Of-Plane Loading Of Insulated Walls, Ammar Al-Maabreh, Fray F. Pozo, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Partially composite concrete insulated wall panels must be designed to handle different types of loading, including out-of-plane concentrated loads. Currently, there is a lack of information that describes and helps engineers analyze the mechanics of axial load transfer for insulated wall panels for concentrated out-of-plane loads that may occur from lifting, handling, or floor/roof reactions. Such loading generates axial and shear forces in the wythe connectors, making it important to choose the type and quantity of connectors in the design process. This paper aims to develop a better understanding of out-of-plane point load mechanics on concrete sandwich wall panels. A …

Agen/Bsen 112 Final Project: Moving And Temperament Of Cattle, Elly Vo, Taetum Baxa, Ved Patel, Brady Giles, Tami M. Brown-Brandl, Rossana Villa-Rojas

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Cattle movement and weather may affect the body temperature of cows which in turn affects their natural behavior and can influence their metabolism. Cattle take several days to resume their normal eating patterns after being overheated, and that can affect dairy production. This project was assigned to study the effect of temperament (calm vs excitable) and evaporative cooling on the body temperature of moving animals to optimize the environmental conditions around the cattle and consequently, dairy production.

The project began with processing of a data set from Tami Brown-Brandl who was the client/adviser for the group. The data contained the …

Spectroscopic Sensor Data Fusion To Improve The Prediction Of Soil Nutrient Contents, Bidhan Ghimire

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

This study aims to advance the understanding and application of spectroscopic sensor data fusion for improving soil nutrient content predictions. In addition to presenting an extensive review of studies on the spectroscopic sensor data fusion, a research investigation was conducted to assess the effectiveness of five fusion algorithms in predicting three primary nutrients (Nitrogen, Phosphorous, and Potassium) and two secondary nutrients (Calcium and Magnesium) in soil using Visible and Near-Infrared, Mid-Infrared, and X-ray Fluorescence data. Among the five fusion algorithms, one was a low-level fusion involving data concatenation. Two were mid-level fusions, incorporating feature extraction by applying (i) Principal Component …

Estimating Crop Stomatal Conductance Through High-Throughput Plant Phenotyping, Junxiao Zhang

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

During photosynthesis and transpiration, crops exchange carbon dioxide and water with the atmosphere through stomata. When a crop experiences water stress, stomata are closed to reducing water loss. However, the closing of stomata also negatively affects the photosynthetic efficiency of the crop and leads to lower yields. Stomatal conductance (gs) quantifies the degree of stomatal opening and closing by using the rate of gas exchange between the crop and the atmosphere, which helps to understand the water status of the crop for better irrigation management. Unfortunately, gs measurement typically requires contact measuring instruments and manual collection in the field, which …

Characterization Of Physical And Biochemical Traits In Wheat And Corn Plants Using High Throughput Image Analysis, Kantilata Thapa

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Plant phenotyping has been recognized as a rapidly growing field of research due to the labor-intensive, destructive, and time-consuming nature of traditional phenotyping methods. These phenotyping bottlenecks can be addressed by advancements in image-based phenotyping like RGB and hyperspectral imaging for the assessment of plant traits important for breeding purposes. This study aims (1) to characterize the physical and biochemical traits of wheat and corn plants using RGB and hyperspectral imaging in the greenhouse, and (2) to estimate leaf nitrogen (N), phosphorus (P), and potassium (K) content using hyperspectral imaging and an analytical spectral device (ASD spectrometer) and compare the …

Jpl Robotic Avionics & Sensor Kit (Rask), John Helzer

Honors Program: Senior Projects (Public)

No abstract provided.

Drinking Water Contaminants: Bacteria, Bruce I. Dvorak, Becky O. Schuerman

Department of Civil and Environmental Engineering: Faculty Publications

Testing drinking water for fecal bacteria or Escherichia coli (E. coli) is commonly used as an indicator of the presence of pathogenic microorganisms. The presence of pathogenic (disease-causing) microorganisms is a concern when considering the safety of drinking water. Pathogenic microorganisms can cause flu-like systems, intestinal infections, dysentery, hepatitis, typhoid fever, cholera, and other illnesses.

A Device For Measuring Acoustic Output Intensity Of Transcranial Doppler Ultrasound Transducers For Comparison With Fda Regulations, Sarah Altman, Gregory Bashford, Benjamin Hage

Honors Program: Senior Projects (Public)

Transcranial Doppler Ultrasonography (TCD) is a non-invasive methodology which can evaluate cerebral blood flow velocity in real time. Single-element focused circular transducers placed on the scalp produce ultrasound waves capable of penetrating the skull with minimal aberration, enabling measurement of the Doppler shift. As such, TCD can measure blood flow velocity in the internal carotid and vertebral arteries, as well as the arteries of the Circle of Willis: the Anterior Cerebral (ACA), Posterior Cerebral (PCA), and Middle Cerebral Arteries (MCA). Intracranial aneurysm and ischemic stroke are serious conditions in which ballooning or occlusion of cerebral vessels cause insufficient perfusion, leading …

Establishment Of Wildflower Islands To Enhance Roadside Health, Ecological Value, And Aesthetics Phase Ii, Jackson Ebbers, Heidi L. Hillhouse, John A. Guretsky, Thomas J. Weissling

Nebraska Department of Transportation: Research Reports

No abstract provided.

Artificial Neural Network-Based Prediction Assessment Of Wire Electric Discharge Machining Parameters For Smart Manufacturing, Itagi Vijayakumar Manoj, Sannayellappa Narendranath, Peter Madindwa Mashinini, Hargovind Soni, Shanay Rab, Shadab Ahmad, Ahatsham Hayat

Department of Electrical and Computer Engineering: Faculty Publications

Artificial intelligence (AI), robotics, cybersecurity, the Industrial Internet of Things, and blockchain are some of the technologies and solutions that are combined to produce “smart manufacturing,” which is used to optimize manufacturing processes by creating and/or accepting data. In manufacturing, spark erosion technique such as wire electric discharge machining (WEDM) is a process that machines different hard-to-cut alloys. It is regarded as the solution for cutting intricate parts and materials that are resistant to conventional machining techniques or are required by design. In the present study, holes of different radii, i.e. 1, 3, and 5mm, have been cut on Nickelvac-HX. …

Analysis And Design Of Lateral Framing Systems For Multi-Story Steel Buildings, Husam Al Dughaishi, Jawad Al Lawati, Moad Alosta, Shaker Mahmood, Mohamed Faisal Al-Kazee, Nur Izzi Md Yusoff, Abdalrhman Milad

Durham School of Architectural Engineering and Construction: Faculty Publications

This study focused on identifying the most appropriate structural system for multi-story buildings and analyzing its response to lateral loads. The study analyzed and compared the different structural systems to determine the most suitable option. The study aims to utilize three lateral framing systems (moment, braced, and diagrid) in order to investigate which system needs the least amount of steel to meet the design requirements. Thus, in order to determine the estimated steel savings of this system as compared to the moment and braced frames, the four-story and eight-story buildings that are 96' × 96' in the plane and utilize …

Deep Reinforcement Learning For Articulatory Synthesis In A Vowel-To-Vowel Imitation Task, Denis Shitov, Elena Pirogova, Tadeusz A. Wysocki, Margaret Lech

Department of Electrical and Computer Engineering: Faculty Publications

Articulatory synthesis is one of the approaches used for modeling human speech production. In this study, we propose a model-based algorithm for learning the policy to control the vocal tract of the articulatory synthesizer in a vowel-to-vowel imitation task. Our method does not require external training data, since the policy is learned through interactions with the vocal tract model. To improve the sample efficiency of the learning, we trained the model of speech production dynamics simultaneously with the policy. The policy was trained in a supervised way using predictions of the model of speech production dynamics. To stabilize the training, …

Graphene Twistronics: Tuning The Absorption Spectrum And Achieving Metamaterial Properties, Ammar Armghan, Meshari Alsharari, Khaled Aliqab, Osamah Alsalman, Juveriya Parmar, Shobhit K. Patel

Department of Mechanical and Materials Engineering: Faculty Publications

Graphene twistronics using multilayer graphene is presented in such a way that it provides a metamaterial effect. This manuscript also analyzes the prediction of behavior using machine learning. The metamaterial effect is achieved by twisting the graphene layers. Graphene twistronics is a new concept for changing the electrical and optical properties of bilayer graphene by applying a small angle twist between the layers. The angle twists of 5^o, 10^o, and 15^o are analyzed for the proposed graphene twistronics design. Tuning in the absorption spectrum is achieved by applying small twists to the angles of the …

Heterogeneous Sensor Data Fusion For Multiscale, Shape Agnostic Flaw Detection In Laser Powder Bed Fusion Additive Manufacturing, Benjamin Bevans, Christopher Barrett, Thomas Spears, Aniruddha Gaikwad, Alex Riensche, Harold (Scott) Halliday, Prahalada Rao

Department of Mechanical and Materials Engineering: Faculty Publications

We developed and applied a novel approach for shape agnostic detection of multiscale flaws in laser powder bed fusion (LPBF) additive manufacturing using heterogenous in-situ sensor data. Flaws in LPBF range from porosity at the micro-scale (< 100 μm), layer related inconsistencies at the meso-scale (100 μm to 1 mm) and geometry-related flaws at the macroscale (> 1 mm). Existing data-driven models are primarily focused on detecting a specific type of LPBF flaw using signals from one type of sensor. Such approaches, which are trained on data from simple cuboid and cylindrical-shaped coupons, have met limited success when used for detecting multiscale flaws in complex LPBF parts. The objective of this work is to develop a heterogenous sensor data fusion …

Projected Long-Term Climate Trends Reveal The Critical Role Of Vapor Pressure Deficit For Soybean Yields In The Us Midwest, Wenguang Sun, David Fleisher, Dennis Timlin, Chittaranjan Ray, Zhuangji Wang, Sahila Beegum, Vangimalla Reddy

Nebraska Water Center: Faculty Publications

Extreme climate events including heat waves and droughts are projected to become more frequent under future climate change conditions. However, the mechanisms between soybean yields and climate factors, specifically involving variable rainfall and high heat episodes, are still unclear, particularly with respect to spatial trends in the United States (US) Midwest. A recently modified version of the model GLYCIM was used to evaluate rainfed soybean production across 12 states at a 10 km spatial resolution for three time periods (2011–2020, 2051–2060, 2091–2099) under Representative Concentration Pathway (RCP) scenarios 4.5 and 8.5. Results showed that except for the northernmost Midwest counties, …

Protocol To Engineer Nanofilms Embedded Lipid Nanoparticles For Controlled And Targeted Drug Delivery (Nectar), Rashi Porwal, Stephen L. Hayward, Srivatsan Kidambi

Department of Chemical and Biomolecular Engineering: Faculty Publications

We present a protocol to engineer a substrate-mediated delivery platform comprising hyaluronic acid-coated lipid nanoparticles (HALNPs) embedded into polyelectrolyte multilayer (PEM) films. This platform allows controlled spatiotemporal release of lipid nanoparticles (LNP) by embedding them within the polyelectrolyte multilayer films matrix. HALNP conjugate with antibodies also adds the ability for targeted delivery. The use of LNP enables this platform to encapsulate both hydrophobic and hydrophilic drugs. This platform can easily be reproduced and utilized for various biomedical drug delivery applications. For complete details on the use and execution of this protocol, please refer to Hayward et al. (2015, 2016a, 2016b), …

Computational Discovery Of Active And Selective Metal- Nitrogen-Graphene Catalysts For Electrooxidation Of Water To H2O2, Payal Chaudhary, Iman Evazzade, Rodion Belosludov,, Vitaly Alexandrov

Department of Chemical and Biomolecular Engineering: Faculty Publications

A direct electrosynthesis of H₂O₂ from either O₂ or H₂O is an attractive strategy to replace the energy-intensive industrial anthraquinone process. Two-electron water oxidation reaction (2e-WOR) offers several advantages over the oxygen reduction reaction such as better mass transfer due to the absence of gasphase reactants. However, 2e-WOR is a more challenging and less studied process with only a handful of metal oxides exhibiting reasonable activity/selectivity properties. Herein, we employ density-functional-theory calculations to screen a variety of metal-nitrogen-graphene structures for 2e-WOR. As a consequence of scaling between the adsorption energies of reaction intermediates, we …

Midwest Roadside Safety Facility Expansion For Enhanced Research Capabilities, Joseph (Lj) Hajduch, Isaac Hansen, Jeff Schroeder, Hozhin Sleman, Ben Wortman

Honors Program: Senior Projects (Public)

As Civil Engineering students, this group was tasked with designing and proposing an engineering solution to a real-world problem. In this case, the Midwest Roadside Safety Facility in Lincoln, Nebraska was looking for a planned proposal to add an additional building to their property for the purpose of additional research and office space. The group decided on the name Zana Engineering – Zana translating to “highly educated” in Kurmanji – to function as the organization responsible for creating this proposal and presentation. Zana Engineering designed this plan on several key factors, most significantly utility, affordability, safety, sustainability, functionality, longevity, and …

Disturbances In Primary Visual Processing As A Function Of Healthy Aging, Seth D. Springer, Tara D. Erker, Mikki Schantell, Hallie J. Johnson, Madelyn P. Willett, Hannah J. Okelberry, Maggie P. Rempe, Anthony Wilson

Department of Agricultural and Biological Systems Engineering: Faculty Publications

For decades, visual entrainment paradigms have been widely used to investigate basic visual processing in healthy individuals and those with neurological disorders. While healthy aging is known to be associated with alterations in visual processing, whether this extends to visual entrainment responses and the precise cortical regions involved is not fully understood. Such knowledge is imperative given the recent surge in interest surrounding the use of flicker stimulation and entrainment in the context of identifying and treating Alzheimer’s disease (AD). In the current study, we examined visual entrainment in eighty healthy aging adults using magnetoencephalography (MEG) and a 15 Hz …

Characterization Of Bubble Transport In Porous Media Using A Microfluidic Channel, Ryan Haggerty, Dong Zhang, Jongwan Eun, Yusong Li

Department of Civil and Environmental Engineering: Faculty Publications

This study investigates the effect on varying flow rates and bubble sizes on gas–liquid flow through porous media in a horizontal microchannel. A simple bubble generation system was set up to generate bubbles with controllable sizes and frequencies, which directly flowed into microfluidic channels packed with different sizes of glass beads. Bubble flow was visualized using a high-speed camera and analyzed to obtain the change in liquid holdup. Pressure data were measured for estimation of hydraulic conductivity. The bubble displacement pattern in the porous media was viscous fingering based on capillary numbers and visual observation. Larger bubbles resulted in lower …

Pan-Arctic Soil Moisture Control On Tundra Carbon Sequestration And Plant Productivity, Donatella Zona, Peter M. Lafleur, Koen Hufkens, Beniamino Gioli, Barbara Bailey, George Burba, Eugénie S. Euskirchen, Jennifer D. Watts, Kyle A. Arndt, Mary Farina, John S. Kimball, Martin Heimann, Mathias Göckede, Martijn Pallandt, Torben R. Christensen, Mikhail Mastepanov, Efrén López-Blanco, Albertus J. Dolman, Roisin Commane, Charles E. Miller, Josh Hashemi, Lars Kutzbach, David Holl, Julia Boike, Christian Wille, Torsten Sachs, Aram Kalhori, Elyn R. Humphreys, Oliver Sonnentag, Gesa Meyer, Gabriel H. Gosselin, Philip Marsh, Walter C. Oechel

Daugherty Water for Food Global Institute: Faculty Publications

Long-term atmospheric CO₂ concentration records have suggested a reduction in the positive effect of warming on high-latitude carbon uptake since the 1990s. A variety of mechanisms have been proposed to explain the reduced net carbon sink of northern ecosystems with increased air temperature, including water stress on vegetation and increased respiration over recent decades. However, the lack of consistent long-term carbon flux and in situ soil moisture data has severely limited our ability to identify the mechanisms responsible for the recent reduced carbon sink strength. In this study, we used a record of nearly 100 site-years of eddy covariance …

Performance Of High Early-Strength Materials Used In Concrete Bridge Repair, Zina Ebrahim, Fray F. Pozo-Lora, Zachary Benson, Mohammad Mastali, Marc Maguire, Jiong Hu

Nebraska Department of Transportation: Research Reports

High early-strength materials are widely used for rapid concrete patching projects to limit road closure time and traffic obstruction. This research investigated the field performance of multiple high early-strength materials used in maintenance projects across Nebraska. Data from high early-strength products included in the state’s approved product list were collected and compared to field performance. In addition, a survey was prepared and distributed to the surrounding states to understand standard practices related to appropriate specifications of these materials that can be later used to develop specifications for the utilization of high early strength materials in Nebraska based on experimental and …

Uhpc Decked I-Beam For Accelerated Bridge Construction, George Morcous, Maher K. Tadros

Nebraska Department of Transportation: Research Reports

Ultra-High-Performance Concrete (UHPC) is an excellent material for bridge construction due to its exceptional durability and superior mechanical properties. Several Departments of Transportations (DOTs), including NDOT, have limited the use of UHPC in bridge construction to joints and connections between bridge components due to the relatively high materials cost of commercially UHPC products. Recently, NDOT has sponsored a research project to develop a non-proprietary UHPC using local materials to reduce materials cost and ensure its availability to local contractors and precast producers. The project was completed successfully and an economical UHPC mix that satisfied all workability, durability, and strength requirements …

Metabolic Network Modeling To Unravel The Impact Of Copper Deficiency And High-Fat Diet On Liver Metabolism, Naeun Lee

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Fatty liver disease is a common health problem caused by an imbalance in the intake, utilization, and distribution of energy. High-fat and high-carbohydrate diets have been identified as major risk factors for fatty liver disease. Other contributors and modifiers can also influence the development of liver damage. Intriguingly, inappropriate copper (Cu) levels in the diet and organs are associated with fatty liver disease, though the exact way in which Cu deficiency or toxicity contributes to metabolic issues is not yet clear. Cu is necessary for several biological processes, including energy production and redox balance. Further research should be taken to …

The Effect Of Relative Humidity On Eddy Covariance Latent Heat Flux Measurements And Its Implication For Partitioning Into Transpiration And Evaporation, Weijie Zhang, Martin Jung, Mirco Migliavacca, Rafael Poyatos, Diego G. Miralles, Tarek S. El-Madany, Marta Galvagno, Arnaud Carrara, Nicola Arriga, Andreas Ibrom, Ivan Mammarella, Dario Papale, Jamie R. Cleverly, Michael Liddell, Georg Wohlfahrt, Christian Markwitz, Matthias Mauder, Eugenie Paul-Limoges, Marius Schmidt, Sebastian Wolf, Christian Brümmer, M. Altaf Arain, Silvano Fares, Tomomichi Kato, Jonas Ardö, Walter Oechel, Chad Hanson, Mika Korkiakoski, Sébastien Biraud, Rainer Steinbrecher, Dave Billesbach, Leonardo Montagnani, William Woodgate, Changliang Shao, Nuno Carvalhais, Markus Reichstein, Jacob A. Nelson

Department of Agricultural and Biological Systems Engineering: Faculty Publications

While the eddy covariance (EC) technique is a well-established method for measuring water fluxes (i.e., evaporation or 'evapotranspiration’, ET), the measurement is susceptible to many uncertainties. One such issue is the potential underestimation of ET when relative humidity (RH) is high (>70%), due to low-pass filtering with some EC systems. Yet, this underestimation for different types of EC systems (e.g. open-path or closed-path sensors) has not been characterized for synthesis datasets such as the widely used FLUXNET2015 dataset. Here, we assess the RH-associated underestimation of latent heat fluxes (LE, or ET) from different EC systems for 163 sites in …

Multifunctional Microgel-Based Cream Hydrogels For Postoperative Abdominal Adhesion Prevention, Bo Liu, Yunfan Kong, Olawale A. Alimi, Mitchell Kuss, Huiyin Tu, Wenfeng Hu, Abu Rafay, Kumar Vikas, Wen Shi, Megan Lerner, William L. Berry, Yulong Li, Mark A. Carlson, Bin Duan

Department of Mechanical and Materials Engineering: Faculty Publications

Postoperative abdominal adhesions are a common problem after surgery and can produce serious complications. Current anti-adhesive strategies focus mostly on physical barriers and are unsatisfactory and inefficient. In this study, we designed and synthesized advanced injectable cream-like hydrogels with multiple functionalities, including rapid gelation, self-healing, anti-oxidation, anti-inflammation, and anti-cellular adhesion. The multifunctional hydrogels were facilely formed by the conjugation reaction of epigallocatechin gallate (EGCG) and hyaluronic acid (HA)-based microgels and polyvinyl alcohol (PVA) based on the dynamic boronic ester bond. The physicochemical properties of the hydrogels including anti-oxidative and anti-inflammatory activities were systematically characterized. A mouse cecum-abdominal wall adhesion model …