Engineering Commons^™

Experimental Investigation Of Image Distortion In A Mach 6 Hypersonic Flow, Ricky W. Green Ii

Theses and Dissertations--Mechanical and Aerospace Engineering

The image distortion that is inherently present when imaging through a flow field at hypersonic speeds was investigated. The original problem involves observation of the outside world from the inside an aircraft moving at hypersonic speeds. For this work, a Mach 6 hypersonic wind tunnel at Wright Patterson Air Force Base (WPAFB) was used and optical patterns were imaged with and without flow field characteristics. Two test campaigns were scheduled to conduct experiments that would provide answers to the proposed problem of the effect on observable aberrations through flow fields.

During the first test campaign, October 2017, optical patterns were …

Modeling Thin Layers In Material Response Solvers, Christen Setters

Theses and Dissertations--Mechanical and Aerospace Engineering

Thermal Protection Systems (TPS) are a necessary component for atmospheric entry. Most TPS contain thin layers of various materials such as ceramic coatings, pore sealers and bonding agents. When modeling TPS, these thin layers are often neglected due to the difference in scale between the TPS (centimeters) and the thin layers (micrometers). In this study, a volume-averaging flux-conservation method is implemented in the governing equations of a finite volume material response code. The model proposes the addition of a volume and area fraction coefficient which utilizes a weighted-averaging between the amount of thin layer and heat shield material in a …

Cell And Biofilm Adhesion Strength Quantified By The Laser Spallation Technique Yields A Novel Biocompatibility Metric, The Adhesion Index, James Boyd

Theses and Dissertations--Mechanical and Aerospace Engineering

Implant associated infections are one of the leading causes of hospital acquired infections in the United States. Medical orthopedic implant devices are designed to improve adhesion of relevant cells within our body. In the case of orthopedic implants, osteoblast cells will adhere and allow for proper integration with the body’s bones. However, virulent bacteria will also adhere onto medical implants and proliferate into biofilms. Bacterial biofilms become extremely difficult to eradicate clinically as antibiotics are not as effective, resulting in severe infections or loss of implant. The aim of this research is to quantify the adhesion strength differential between relevant …

Effective Modulus Of Cracked Bodies: A Finite Element Analysis, Alan Thomas Varughese

Theses and Dissertations--Mechanical and Aerospace Engineering

This thesis considers how cracks in an elastic body can alter the body’s elastic properties. In the present study the elastic property of note is the elastic or young’s modulus. It is desired to investigate to what extent the number and orientation of cracks can cause a reduction in the elastic modulus. Because of the complex nature of the elastic fields resulting from multiple cracks interacting together in a finite geometry an analytical solution is not possible or considered. Rather the Finite Element Method is used to determine the elastic response to a body with many cracks. This provides a …

A Computational Fluid-Structure Interaction Method For Simulating Supersonic Parachute Inflation, Jonathan Boustani

Theses and Dissertations--Mechanical and Aerospace Engineering

Following the successful landing of the Curiosity rover on the Martian surface in 2012, NASA/JPL conducted the low-density supersonic decelerator (LDSD) missions to develop large diameter parachutes to land the increasingly heavier payloads being sent to the Martian surface. Unexpectedly, both of the tested parachutes failed far below their design loads. It became clear that there was an inability to model and predict loads that occur during supersonic parachute inflation. In this dissertation, a new computational method that was developed to provide NASA with the capability to simulate supersonic parachute inflation is presented and validated. The method considers the loose …

Structural Optimization Of Space Transit Vehicle Concept, Hercules, James Philip Rogers

Theses and Dissertations--Mechanical and Aerospace Engineering

STRUCTURAL OPTIMIZATION OF SPACE TRANSIT VEHICLE CONCEPT, HERCULES:

A COMPARATIVE STUDY OF STRUCTURAL OPTIONS

Hercules is a vehicle concept developed by NASA Langley's Vehicle Analysis Branch to satisfy the need for sustainable transit between Earth, the moon, and Mars. Hercules features unprecedented abort capabilities and mission flexibility to aid in NASA's Mars campaign. By utilizing modern software to perform structural analysis and optimization for a large selection of stiffened panel concepts, beam concepts, and materials trends in the structural optimization emerge. These trends will be invaluable for the design of future spacecraft needed to fulfill similar roles.

The structural optimization …

Electromagnetic Formation Control Using Frequency Multiplexing, Zahra Abbasi

Theses and Dissertations--Mechanical and Aerospace Engineering

This dissertation addresses control of relative positions and orientations of formation flying satellites using magnetic interactions. Electromagnetic formation flight (EMFF) is implemented, in which each satellite is equipped with a set of electromagnetic coils to generate an electromagnetic field. Traditional EMFF technique applies DC magnetic fields which lead to a nonlinear and highly coupled formation dynamics that allow for only position or orientation control of the satellites. We present a new frequency multiplexing method, which is a technique that uses multi-frequency sinusoidal controls, to approximately decouple the formation dynamics and to provide enough controls for both position and orientation control. …

Additive Manufacturing In Personalized Medicine: Patient-Customized Solid Dose Medicines, And Patient-Customized Wound Care Device, Amir Najarzadeh

Theses and Dissertations--Mechanical and Aerospace Engineering

Personalized Medicine - from a one-size fits all to a tailored approach is the future in pharmaceutical therapeutics and medical applications. The aim of this study is demonstrate additive manufacturing in two personalized medicine applications: 1. Patient- customized solid dose medicines, and 2. Patient-customized wound care device. The aim of the first application is to develop an inexpensive and accurate method to design and fabricate patient-customized tablets. Particularly this paper focuses on fabricating and dose controlling of patient-customized extended release prednisolone-poly(vinyle alcohole) PVA. Dry-Blending, Wet Granulation, Extrusion, Spherionization, Hot melt extrusion (HME) was adopted to produce drug loaded prednisolone-PVA filaments …

Quantifying The Source And Pathway Of Dissolved Reactive Phosphate In Karst Drainage Of The Inner-Bluegrass, Cory Radcliff

Theses and Dissertations--Biosystems and Agricultural Engineering

In the Midwestern U.S. seasonal hypoxia experienced in the Gulf of Mexico and harmful algal blooms in inland freshwater ponds, lakes, and rivers are partly fueled by dissolved orthophosphate loadings from disturbed landscapes. Efforts to reduce dissolved reactive phosphate (DRP) loadings have had varying levels of success and have led to insufficient water quality improvements. Inefficiencies in conservation strategies can stem from poor understanding of phosphate source and flow pathway dynamics. This study focused on monitoring sources and flow pathways of dissolved reactive P in a karst agroecosystem with phosphatic limestone. We collected event water samples at the Camden Creek …

Extraction Of Micro- And Nano-Plastic Particles From Water Using Hydrophobic Natural Deep Eutectic Solvents, Jameson R. Hunter

Theses and Dissertations--Biosystems and Agricultural Engineering

The production of plastic and the amount of waste plastic that enters the environment increases every year. Synthetic polymers will gradually break down into particles on the micro- and nano-scale. The micro- and nano-plastics pose a significant ecological harm by transporting toxic chemicals and causing inflammation and cellular damage when ingested. Two common plastics are polyethylene terephthalate (PET) and Polystyrene (PS), and a newer bioplastic polylactic acid (PLA) that has become a popular alternative. Deep eutectic solvents are a recently discovered solvent composed of a hydrogen bond donor and hydrogen bond acceptor and have been proposed as a cheaper alternative …

Assessing The Use Of Lidar And Uav Technology For Monitoring Growing Alfalfa, Stuart Tucker Sheffield

Theses and Dissertations--Biosystems and Agricultural Engineering

Alfalfa is a popularly grown crop because of its value as a nutritious feed source for livestock. The efficient production of an alfalfa crop relies on the monitoring of certain parameters, like height, quality, and yield. Traditionally, producers have used manual measurements of alfalfa plant height to estimate the nutritive quality and yield of a growing alfalfa crop. Manual measurements of plant height are often labor intensive and provide low resolution data that is not acceptable for full field scale assessment of growing alfalfa. The two studies presented in this thesis offer detailed insight into the rapid and accurate monitoring …

Characterization And Upgrade Of Endocarp Biomass Derived Lignin To Value Added Products, Makua Vin-Nnajiofor

Theses and Dissertations--Biosystems and Agricultural Engineering

Lignin is an abundant biopolymer and a promising source of feedstock for high-value chemicals and energy materials, however, application methods of lignin into valuable products is yet to be fully explored. This study explores the valorization of lignin derived from lignin-rich endocarp biomass through the development of lignin-derived electrode materials. The chemical composition and cellular structure of the endocarps were characterized using HPLC and scanning electron microscopy (SEM) imaging. Mechanical properties of walnut and peach endocarps and preprocessing requirements were investigated using nanoindentation and specific energy consumption during grinding. Next, lignin was extracted from endocarps using deep eutectic solvent and …

Modeling Energy Flows In Floating In-Pond Raceways Utilizing Solar Power Back-Up, Bo Smith

Theses and Dissertations--Biosystems and Agricultural Engineering

The In-pond Raceway (IPR) is a novel option for production aquaculture, depending on water moving devices to provide constant flow. Device failure may result in catastrophic fish loss, requiring power backup systems to mitigate risk in case of power outages. Because these systems must be dependable and many suitable locations are remote, off-grid solar photovoltaic (PV) systems with battery storage have been considered since they eliminate need for utility power. Such systems can be hard to size and expensive. This study modeled system requirements using an energy balance to determine whether systems could withstand varying loads based on climatological conditions. …

Evaluating The Biotic Condition Of Restored Streams In Kentucky’S Inner Bluegrass Region, Charles Cole Crankshaw

Theses and Dissertations--Biosystems and Agricultural Engineering

Numerous stream restoration projects have been implemented in Kentucky’s Inner Bluegrass region to offset anthropogenic impacts. These projects range from full channel realignments to volunteer-led riparian installations. To assess the ability of said projects to restore stream habitat and biota, full restoration (n=12) and riparian (n=6) sites were compared to reference (n=6) and disturbed (n=12) sites using RBP and SVAP protocols, macroinvertebrate samples, and geomorphology. General trends for SVAP, RBP, and BI scores, starting with highest habitat or biotic quality, were reference sites, full and riparian restoration sites, then disturbed sites. The number of EPT taxa, another indicator of biological …

Comparing Beopt (Energyplus) Energy Predictions To Measured Circuit Level Energy Consumption Of 12 Similar Small Energy-Efficient Single-Family Residences, Braydi Mcpherson-Hathaway

Theses and Dissertations--Biosystems and Agricultural Engineering

Residential energy usage patterns change as a result of new building codes, renewable technologies, household electronics, and changes in occupancy habits. Building simulations have used end-use energy studies to inform occupancy profiles and overall usage characteristics for the building simulations. Building simulations allow designers, engineers, policymakers, code developers, and building owners to model proposed designs to new and existing buildings, thus it is imperative that the energy profiles used in the models are accurate. In this study, the building simulation engine BEopt is used to model energy-efficient homes recently constructed in Southern Kentucky. The homes have well defined building characteristics …

Routing And Applications Of Vehicular Named Data Networking, Bassma G. Aldahlan

Theses and Dissertations--Computer Science

Vehicular Ad hoc NETwork (VANET) allows vehicles to exchange important informationamong themselves and has become a critical component for enabling smart transportation.In VANET, vehicles are more interested in content itself than from which vehicle the contentis originated. Named Data Networking (NDN) is an Internet architecture that concentrateson what the content is rather than where the content is located. We adopt NDN as theunderlying communication paradigm for VANET because it can better address a plethora ofproblems in VANET, such as frequent disconnections and fast mobility of vehicles. However,vehicular named data networking faces the problem of how to efficiently route interestpackets and …

Novel Machine Learning And Wearable Sensor Based Solutions For Smart Healthcare Monitoring, Rajdeep Kumar Nath

Theses and Dissertations--Electrical and Computer Engineering

The advent of IoT has enabled the design of connected and integrated smart health monitoring systems. These health monitoring systems can be utilized for monitoring the mental and physical wellbeing of a person. Stress, anxiety, and hypertension are the major elements responsible for the plethora of physical and mental illnesses. In this context, the older population demands special attention because of the several age-related complications that exacerbate the effects of stress, anxiety, and hypertension. Monitoring stress, anxiety, and blood pressure regularly can prevent long-term damage by initiating necessary intervention or clinical treatment beforehand. This will improve the quality of life …

Development Of A Hybrid-Electric Aircraft Propulsion System Based On Silicon Carbide Triple Active Bridge Multiport Power Converter, Cole M. Ivey

Theses and Dissertations--Electrical and Computer Engineering

Constrained by the low energy density of Lithium-ion batteries with all-electric aircraft propulsion, hybrid-electric aircraft propulsion drive becomes one of the most promising technologies in aviation electrification, especially for wide-body airplanes. In this thesis, a three-port triple active bridge (TAB) DC-DC converter is developed to manage the power flow between the turbo generator, battery, and the propulsion motor. The TAB converter is modeled based on the emerging Silicon Carbide (SiC) Metal-Oxide-Semiconductor Field Effect Transistor (MOSFET) modules operating at high switching frequency, so the size of the magnetic transformer can be significantly reduced. Different operation modes of this hybrid-electric propulsion drive …

Re-Designing Main Memory Subsystems With Emerging Monolithic 3d (M3d) Integration And Phase Change Memory Technologies, Chao-Hsuan Huang

Theses and Dissertations--Electrical and Computer Engineering

Over the past two decades, Dynamic Random-Access Memory (DRAM) has emerged as the dominant technology for implementing the main memory subsystems of all types of computing systems. However, inferring from several recent trends, computer architects in both the industry and academia have widely accepted that the density (memory capacity per chip area) and latency of DRAM based main memory subsystems cannot sufficiently scale in the future to meet the requirements of future data-centric workloads related to Artificial Intelligence (AI), Big Data, and Internet-of-Things (IoT). In fact, the achievable density and access latency in main memory subsystems presents a very fundamental …

Special Power Electronics Converters And Machine Drives With Wide Band-Gap Devices, Yibin Zhang

Theses and Dissertations--Electrical and Computer Engineering

Power electronic converters play a key role in power generation, storage, and consumption. The major portion of power losses in the converters is dissipated in the semiconductor switching devices. In recent years, new power semiconductors based on wide band-gap (WBG) devices have been increasingly developed and employed in terms of promising merits including the lower on-state resistance, lower turn-on/off energy, higher capable switching frequency, higher temperature tolerance than conventional Si devices. However, WBG devices also brought new challenges including lower fault tolerance, higher system cost, gate driver challenges, and high dv/dt and resulting increased bearing current in electric machines.

This …

Dual-Functional Phosphorene Nanocomposite Membranes For The Treatment Of Perfluorinated Water: An Investigation Of Perfluorooctanoic Acid Removal Via Filtration Combined With Ultraviolet Irradiation Or Oxygenation, Joyner Eke, Lillian Banks, M. Abdul Mottaleb, Andrew J. Morris, Olga V. Tsyusko, Isabel C. Escobar

Internal Medicine Faculty Publications

Nanomaterials with tunable properties show promise because of their size-dependent electronic structure and controllable physical properties. The purpose of this research was to develop and validate environmentally safe nanomaterial-based approach for treatment of drinking water including removal and degradation of per- and polyfluorinated chemicals (PFAS). PFAS are surfactant chemicals with broad uses that are now recognized as contaminants with a significant risk to human health. They are commonly used in household and industrial products. They are extremely persistent in the environment because they possess both hydrophobic fluorine-saturated carbon chains and hydrophilic functional groups, along with being oleophobic. Traditional drinking water …

The Characterization Of Purified Citrate-Coated Cerium Oxide Nanoparticles Prepared Via Hydrothermal Synthesis, Matthew L. Hancock, Robert A. Yokel, Matthew J. Beck, Julie L. Calahan, Travis W. Jarrells, Eric J. Munson, George A. Olaniyan, Eric A. Grulke

Chemical and Materials Engineering Faculty Publications

Hypothesis

Cerium oxide nanoparticles were synthesized using a hydrothermal approach with citric acid as a stabilizing agent. Citric acid adsorption onto the nanoceria particle surface can cease particle formation and create a stable dispersion for an extended shelf life. The product was dialyzed immediately following the synthesis to remove unreacted cerium that could contribute to biological effects. Nanoparticle characterization results are expected to help identify the surface citrate bonding structure.

Experiments

Many characterization techniques were utilized to determine size, morphology, surface properties, and citrate complexation on the nanoceria particle surface. These included transmission electron microscopy, electron energy loss spectroscopy, dynamic …

Leveraging Chemical And Computational Biology To Probe The Cellulose Synthase Complex, B. Kirtley Amos

Theses and Dissertations--Plant and Soil Sciences

Cellular expansion in plants is a complex process driven by the constraint of internal cellular turgor pressure by an expansible cell wall. The main structural element of the cell wall is cellulose. Cellulose is vital to plant fitness and the protein complex that creates it is an excellent target for small molecule inhibition to create herbicides. In the following thesis many small molecules (SMs) from a diverse library were screened in search of new cellulose biosynthesis inhibitors (CBI). Loss of cellular expansion was the primary phenotype used to search for putative CBIs. As such, this was approached in a forward …

Boundary Integral Equation Method For Electrostatic Field Prediction In Piecewise-Homogeneous Electrolytes, Christopher Keith Pratt

Theses and Dissertations--Electrical and Computer Engineering

This thesis presents a method to predict electrostatic fields, potentials, and currents in regions containing piecewise-homogeneous electrolytes. Additionally, an efficient electric field calculation is presented. A boundary integral equation is formulated for the boundary potentials and currents and is discretized using the Locally Corrected Nyström method. Solution convergence with respect to the mesh discretization and basis order is investigated. The techniques are validated through analysis of problems with either analytic solutions, with published data, or with other solution methods.

Electric Power Systems And Components For Electric Aircraft, Damien Lawhorn

Theses and Dissertations--Electrical and Computer Engineering

Electric aircraft have gained increasing attention in recent years due to their potential for environmental and economic benefits over conventional airplanes. In order to offer competitive flight times and payload capabilities, electric aircraft power systems (EAPS) must exhibit extremely high efficiencies and power densities. While advancements in enabling technologies have progressed the development of high performance EAPS, further research is required.

One challenge in the design of EAPS is determining the best topology to be employed. This work proposes a new graph theory based method for the optimal design of EAPS. This method takes into account data surveyed from a …

Fabrication And Simulation Of Perovskite Solar Cells, Maniell Workman

Theses and Dissertations--Electrical and Computer Engineering

Since the dawning of the industrial revolution, the world has had a need for mass energy production. In the 1950s silicon solar panels were invented. Silicon solar panels have been the main source of solar energy production. They have set the standard for power conversion efficiency for subsequent generations of photovoltaic technology. Solar panels utilize light’s ability to generate an electron hole pair. By creating a PN Junction in the photovoltaic semiconductor, the electron and hole are directed in opposing layers of the solar panel generating the electric current. Second generation solar panels utilized different thin film materials to fabricate …

Traveling Wave Fault Location Method For Distribution Systems With Distributed Generation, Oluwafeyisayo Afolabi

Theses and Dissertations--Electrical and Computer Engineering

Fault location is an important topic within electric power systems, as accurate fault location techniques will improve the reliability of the system and reduce downtime caused by outages. This paper explores fault location in distribution systems with distributed generation using the traveling wave fault location method. The single-ended and double-ended traveling wave methods are evaluated using a single-circuit distribution system which is modeled using MATLAB SIMULINK. The results are compared using a basis of signals and bus pairs across fault types, sampling rates and fault resistances.

Energy Harvesting And Sensor Based Hardware Security Primitives For Cyber-Physical Systems, Carson Labrado

Theses and Dissertations--Electrical and Computer Engineering

The last few decades have seen a large proliferation in the prevalence of cyber-physical systems. Although cyber-physical systems can offer numerous advantages to society, their large scale adoption does not come without risks. Internet of Things (IoT) devices can be considered a significant component within cyber-physical systems. They can provide network communication in addition to controlling the various sensors and actuators that exist within the larger cyber-physical system. The adoption of IoT features can also provide attackers with new potential avenues to access and exploit a system's vulnerabilities. Previously, existing systems could more or less be considered a closed system …

Toward Intelligent Welding By Building Its Digital Twin, Qiyue Wang

Theses and Dissertations--Electrical and Computer Engineering

To meet the increasing requirements for production on individualization, efficiency and quality, traditional manufacturing processes are evolving to smart manufacturing with the support from the information technology advancements including cyber-physical systems (CPS), Internet of Things (IoT), big industrial data, and artificial intelligence (AI). The pre-requirement for integrating with these advanced information technologies is to digitalize manufacturing processes such that they can be analyzed, controlled, and interacted with other digitalized components. Digital twin is developed as a general framework to do that by building the digital replicas for the physical entities. This work takes welding manufacturing as the case study to …

Vibro-Acoustic Codling Moth Larvae Infestation Detection In Apples, Chadwick A. Parrish

Theses and Dissertations--Electrical and Computer Engineering

Within recent years, the demand for organic produce has greatly increased due to many factors, including increasing knowledge about such things as dietary fiber and balanced gastrointestinal bacterial ecosystems. This increase in demand, coupled with the financial penalties for sending invasive species and pests across borders, presents a need for a scalable and accurate system to non-destructively detect infestation. The proposed work addresses this problem by testing the performance of a non-destructive vibro-acoustic method for detecting lava activity in apples. This involved 3 steps; design a mechanical data collection prototype for testing apples, a evaluate a set of features, and …