Engineering Commons^™

Investigation Of Nitrate Transfer In Karst Basins During Storm Events Using Submersible Underwater Nutrient Analyzers, John Pike

Theses and Dissertations--Civil Engineering

Knowledge of nitrate sources and pathways in karst basins remains incomplete and hinders management of nutrients that cause algae blooms and degrade municipal water supply. However, the increased availability of optical, ultraviolet nitrate sensors allows advancement of nitrate source and transfer for water managers. A concept model is hypothesized for nitrate transfer during hydrologic events and baseflow that considers the multiple porosity of karst. To test the concept model, 15-minute nitrate sensor data is collected with submersible underwater nutrient analyzers over a multi-year period from two locations in a karst basin in the inner bluegrass region of central Kentucky, USA. …

Localization Of Stationary Source Of Floor Vibration Using The Steered Response Power Method, Mohammad Royvaran

Theses and Dissertations--Civil Engineering

If the generated vibration in a building exceeds the acceptable limit design for a floor system, it is necessary to identify the source of vibration, a process known as localization. The objective of this study is the localization of stationary vibration sources, and the approach used is the steered response power (SRP) method. This method has already been shown to work well for wireless and acoustical applications to locate transmitter and sound sources, respectively. To the writer’s knowledge, this study is the first application of the SRP method to locate vibration sources using floor vibration measurements. However, because waves behave …

Landslide Site Assessment And Characterization Using Remote Sensing Techniques, Batmyagmar Dashbold

Theses and Dissertations--Civil Engineering

Landslides are common and dangerous natural hazards that occur worldwide, often causing severe direct impacts on human lives, public and private properties. It is imperative to identify the landslide susceptible areas to avoid or mitigate the possible damage. Landslide prediction can be presented in a slope failure in spatial and/ or temporal terms. If it is presented in spatial term, it is considered a landslide susceptibility map (LSM) defined as the probability of spatial occurrence of slope failures. If it is presented in a combination of spatial and temporal distribution of the landslide susceptibility, it is commonly referred to as …

Artificial Intelligence And Soft Computing In Smart Structural Systems, Sajad Javadinasab Hormozabad

Theses and Dissertations--Civil Engineering

Next-generation smart cities are the key feature in the next chapter of human life. Cities that employ innovative and technology-driven solutions to improve the sustainability, resilience, prosperity, and amenity of the community are considered smart cities. Development of smart cities requires fundamental innovations in many technical and technological aspects including those contributing to smart structures. Smart technologies improve the structural performance against natural disasters like earthquakes, hurricanes, tornados, and promote the sustainability of structural systems. Next-generation smart structures encompass a variety of technologies including Structural Control (SC) and Structural Health Monitoring (SHM). SC covers methodologies and technologies that modify the …

Towards A Holistic Risk Model For Safeguarding The Pharmaceutical Supply Chain: Capturing The Human-Induced Risk To Drug Quality, Heather R. Campbell

Theses and Dissertations--Pharmacy

Counterfeit, adulterated, and misbranded medicines in the pharmaceutical supply chain (PSC) are a critical problem. Regulators charged with safeguarding the supply chain are facing shrinking resources for inspections while concurrently facing increasing demands posed by new drug products being manufactured at more sites in the US and abroad. To mitigate risk, the University of Kentucky (UK) Central Pharmacy Drug Quality Study (DQS) tests injectable drugs dispensed within the UK hospital. Using FT-NIR spectrometry coupled with machine learning techniques the team identifies and flags potentially contaminated drugs for further testing and possible removal from the pharmacy. Teams like the DQS are …

Understanding Absorption, Supersaturation, And Drug Activity In Solution: Working Towards Developing A More Biorelevant Media, Freddy Arce

Theses and Dissertations--Pharmacy

With the looming dominance of poorly water-soluble chemical entities within the pharmaceutical pipeline, the pharmaceutical industry has leaned on the use of supersaturating drug delivery systems (SDDSs) to achieve efficacious concentrations within the gastrointestinal fluids. SDDSs aim to achieve concentrations in solutions greater than the solubility of the lowest energy crystalline form. However, the generation of supersaturated solutions of active pharmaceutical ingredients (APIs) creates a strong crystallization potential, which is undesirable.

In product development, supersaturating products often fail in Phase I and Phase II clinical trials due to poor oral bioavailability and a lack of in vivo efficacy. Pre-clinical testing …

Development Of An Autonomous Navigation System For The Shuttle Car In Underground Room & Pillar Coal Mines, Vasileios Androulakis

Theses and Dissertations--Mining Engineering

In recent years, autonomous solutions in the multi-disciplinary field of the mining engineering have been an extremely popular applied research topic. The growing demand for mineral supplies combined with the steady decline in the available surface reserves has driven the mining industry to mine deeper underground deposits. These deposits are difficult to access, and the environment may be hazardous to mine personnel (e.g., increased heat, difficult ventilation conditions, etc.). Moreover, current mining methods expose the miners to numerous occupational hazards such as working in the proximity of heavy mining equipment, possible roof falls, as well as noise and dust. As …

Investigation Of Coal Burst Potential Using Numerical Modeling And Rock Burst Indices, Cristian David Cardenas Triana

Theses and Dissertations--Mining Engineering

Coal bursts are typically defined as a rapid failure of coal or surrounding rock producing a violent release of energy and ejection of rock particles. This phenomenon is extremely complex and dynamic, and this has made it very difficult to predict. In the last decades, different researchers have aimed to understand the sources and mechanisms of failure of coal bursts. Various indices have been developed to assess the burst potential such as the Burst Potential Index (BPI), Energy Storage Rate, and the Strain Energy Density. Lately, numerical modeling has also been used as a tool to examine the rock deformation …

An Approach For Predicting Flow Characteristics At The Continuous Miner Face, Kayla Henderson

Theses and Dissertations--Mining Engineering

As coal and rock are mined, dust is dispersed into the air. This dust, among other contaminants, poses a serious health and safety risk to mineworkers. Very fine dust known as respirable dust can infiltrate the deepest part of the lungs, and long-term exposure to these particles leads to a disease called coal worker’s pneumoconiosis (CWP). Occurrence of this disease declined steadily over the latter half of the 20^th century; however, a recent study indicates that CWP has reemerged with an upward trend beginning at the turn of the century. To combat dust exposure, mine operators use a combination …

Application Of A Novel Ventilation Simplification Algorithm, Caitlin V. Strong

Theses and Dissertations--Mining Engineering

Ventilation network analysis is an integral part of maintaining a safe mine environment. Despite its important role, liberties are often taken with the representation of networks in ventilation network analysis software. In order to provide an alternative to heuristic methods used by ventilation engineers, a simplification algorithm has been developed. This algorithm is designed to work as a compliment to ventilation software. Comparisons of original ventilation networks and simplified networks show little to no change in fan operating point. The program utilizing this algorithm provides an alternative to reducing networks with a parallel factor. It can also be used in …

Capture Of Respirable Dust Using Maintenance Free Impingement Screen, Neeraj Kumar Gupta

Theses and Dissertations--Mining Engineering

Dust produced during mining activities has a detrimental effect on both miners’ health and operations’ safety. There is no definitive treatment for coal miners’ pneumoconiosis (CWP), which is caused by prolonged inhalation of respirable dust. Elevated coal dust concentrations have also been shown to cause several disastrous explosions in the United States and worldwide, resulting in the death of miners and loss of operations. Flooded-bed dust scrubbers are used on all modern-day continuous miners. These devices cleanse the dust-laden air and assist in bringing fresh air towards the mining face. Scrubbers use a multi-layered fibrous screen to capture airborne particles. …

Concepts For Development Of Shuttle Car Autonomous Docking With Continuous Miner Using 3-D Depth Camera, Sibley Miller

Theses and Dissertations--Mining Engineering

In recent years, a great deal of work has been conducted in automating mining equipment with the goals of increasing worker health and safety and increasing mine productivity. Automating vehicles such as load-haul-dumps been successful even in underground environments where the use of global positioning systems are unavailable. This thesis addresses automating the operation of a shuttle car, specifically focusing on positioning the shuttle car under the continuous miner coal-discharge conveyor during cutting and loading operations. This task requires recognition of the target and precise control of the tramming operation because a specific orientation and distance from the coal discharge …

Oxidation Pretreatment For Enhanced Leachability Of Rare Earth Elements From Bituminous Coal Sources, Tushar Gupta

Theses and Dissertations--Mining Engineering

Rare earth elements (REEs) are critical components in advanced electronics, clean energy technologies, and national energy and economic security. The global supply situation of these strategically valuable elements remains critical as the market is largely monopolistic. Thus, to alleviate the dependence on global imports, investments are being made in the research and development of innovative and cost-effective technologies for the indigenous processing and recovery of REEs from alternate sources that are cheap and abundant. Numerous research findings have identified potential benefits and proven the technological feasibility of extracting and selectively concentrating REEs from coal byproducts such as preparation plant rejects …

The Kentucky Re-Entry Universal Payload System (Krups): Orbital Flight, James Tyler Nichols

Theses and Dissertations--Mechanical and Aerospace Engineering

Due to the uniqueness of atmospheric entry environments, ground facilities cannot accurately replicate re-entry conditions. Consequently, scientists primarily rely on numerical models to predict these conditions and inform Thermal Protection System (TPS) designs. These models often lack flight validation, which is necessary for increasing their fidelity. Thus, there is a substantial need to obtain such data to advance modeling capabilities.

The Kentucky Re-entry Universal Payload System (KRUPS) is an adaptable test-bed for scientific experimentation with initial application to TPS. This vehicle was designed at the University of Kentucky to serve as an inexpensive means of obtaining validation data to enhance …

Measurements Of Wind Turbine Wake Evolution And Trajectory During Morning Boundary Layer Transition And Under Wake Steering Conditions Via Unmanned Aerial Vehicles, Stewart Nelson

Theses and Dissertations--Mechanical and Aerospace Engineering

In July of 2019, a flight campaign was conducted using semi-autonomous Unmanned Aerial Vehicles (UAVs) at the Port Alma Kruger Energy wind farm in Ontario, Canada, to study various aspects of wind turbine wake evolution. Horizontal transects across the wakes were measured using modified fixed-wing aircraft fitted with a five-hole probe to measure the wind velocity vector. Reference boundary layer conditions were measured by an octocopter with an assortment of mounted sensors flying vertical profiles upstream of the turbines. Three experiments were conducted during the campaign, which consisted of a study on wake behavior during the morning boundary layer transition, …

Prediction Of Noise Emissions Using Panel Contribution Analysis Supplemented With Scale Modeling, Gong Cheng

Theses and Dissertations--Mechanical and Aerospace Engineering

Panel contribution analysis (PCA) can be used to predict machinery noise emissions, component contributions, and to assess the impact of sound reduction treatments. PCA is a measurement approach that is advantageous for complex machinery that is not easily modeled using conventional numerical analysis approaches. In this research, PCA is combined with scale modeling in order to speed up the necessary measurement work. Moreover, the method can be applied to much larger machinery and noise emissions can be assessed prior to locating and installing the equipment. This eliminates the necessity to use voluminous anechoic chambers.

The machinery is first discretized into …

Kinetics Of Elementary Reactions In Graphene Oxidation And Kinetics Of Oh* In Hydrogen Flames, Siamak Mahmoudi

Theses and Dissertations--Mechanical and Aerospace Engineering

Due to diverse applications of graphene, a kinetic mechanism describing rates of elementary reactions is extremely useful. To achieve that goal the elementary reactions need to be detected and their rates need to be determined. In this work the objectives are to use first-principle tools to find those reactions and analyze their paths in the context of graphene oxidation. Density functional theory (DFT) calculations provide the best approximation to the Schr\"{o}dinger equation, which is not feasible to solve analytically for large molecules like graphene. We have performed these calculations to find stable configurations (geometry optimization) and minimum energy paths between …

Balancing Trade-Offs In One-Stage Production With Processing Time Uncertainty, Jingjing You

Theses and Dissertations--Mechanical and Aerospace Engineering

Stochastic production scheduling faces three challenges, first the inconsistencies among key performance indicators (KPIs), second the trade-offs between the expected return and the risk for a portfolio of KPIs, and third the uncertainty in processing times. Based on two inconsistent KPIs of total completion time (TCT) and variance of completion times (VCT), we propose our trade-off balancing (ToB) heuristic for one-stage production scheduling. Through comprehensive case studies, we show that our ToB heuristic with preference =0.0:0.1:1.0 efficiently and effectively addresses the three challenges. Moreover, our trade-off balancing scheme can be generalized to balance a number of …

Tailoring Texture, Microstructure, And Shape Memory Behavior Of Niti Alloys Fabricated By L-Pbf-Am, Sayed Ehsan Saghaian N.E.

Theses and Dissertations--Mechanical and Aerospace Engineering

Laser Powder Bed Fusion (L-PBF) is one of the most promising Additive Manufacturing (AM) methods to fabricate near net-shape metallic materials for a wide range of applications such as patient-specific medical devices, functionally graded materials, and complex structures. NiTi shape memory alloys (SMAs) are of great interest due to a combination of unique features, such as superelasticity, shape memory effect, high ductility, work output, corrosion resistance, and biocompatibility that could be employed in many applications in automotive, aerospace, and biomedical industries. Due to the difficulties with traditional machining and forming of NiTi components, the ability to fabricate complex parts, tailor …

A Theoretical Study On Integration And Optimization Of Gas Turbine Problems With Solar Energy System, Ahmad M. Abubaker

Theses and Dissertations--Mechanical and Aerospace Engineering

Gas Turbine (GT) power plants suffer from sensitivity to ambient-air temperatures, high fuel consumption, and a high amount of waste heat dumped into the ambient. Various solutions were proposed to solve these drawbacks, which could simultaneously solve at most two problems, usually at the expense of the third. For instance, inlet-air cooling can reduce ambient-air temperatures but will result in increased fuel consumption. However, in this work, a novel cascaded system was integrated into a combined cycle, capable of simultaneously solving all the aforementioned GT drawbacks. Parabolic trough collectors were used to preheat the air at the combustion chamber inlet …

The Role Of Live Conifer Fuels In Crown Fires Spread, Adnan Darwish Ahmad

Theses and Dissertations--Mechanical and Aerospace Engineering

Live foliage for some tree and shrub species can support flaming fire spread at much higher moisture content than dead fuel materials. However, the role of live fuels in forest fires has been controversial in the past decades. Although ignition and spread statistical data for live and dead fuels exist in the literature, a clear understanding of the fundamental difference in the burning behavior is missing. To illuminate the role of live fuel on forest fire spreading, a laboratory ignition experiment was designed to examine the burning behavior of live Norway spruce needles. A schlieren-Infrared combined measurement apparatus was developed …

Use Of Microscale Hydrophobic Surface Features For Integration Of 3d Cell Culture Into Multi-Functional Microfluidic Devices, Soroosh Torabi

Theses and Dissertations--Mechanical and Aerospace Engineering

3D cell culture and microfluidics both represent powerful tools for replicating critical components of the cell microenvironment; however, challenges involved in integration of the two and compatibility with standard tissue culture protocols still represent a steep barrier to widespread adoption. Here we demonstrate the use of engineered surface roughness in the form of microfluidic channels to integrate 3D cell-laden hydrogels and microfluidic fluid delivery. When a liquid hydrogel precursor solution is pipetted onto a surface containing open microfluidic channels, the solid/liquid/air interface becomes pinned at sharp edges such that the hydrogel forms the “fourth wall” of the channels upon solidification. …

Turbulence Suppression In An Axially Rotating Pipe, Alyn J. Smith

Theses and Dissertations--Mechanical and Aerospace Engineering

The phenomenon of turbulence suppression in a rotating pipe flow system has been well documented by past research and experimentation. Despite this, the methods that drive this phenomenon have not yet been effectively characterized, especially at higher Reynolds numbers. While many experiments have been performed to better understand swirling turbulent pipe flow, a difficulty that arises is how to test for high levels of rotation without reducing the Reynolds number. This thesis documents the design and construction of a new pressurized pipe flow system at the University of Kentucky aimed at achieving high Reynolds numbers without causing a reduction in …

Multiscale Finite Element Modeling Of Active Contraction In Striated Muscle, Charles Kurtis Mann

Theses and Dissertations--Mechanical and Aerospace Engineering

Greater than one in three American adults have at least one type of cardiovascular disease, a major cause of morbidity. Computational cardiac mechanics has become an important part of the research effort to understand the heart’s response to mechanical stimuli and as an extension, disease progression and potential therapies. To this end, the present work aims to extend these efforts by implementing a cell level contractile model in which active stress generation in muscle tissue is driven by half-sarcomere mechanics. This is accomplished by enhancing the MyoSim model of actin and myosin in order to produce a multiscale model. This …

Evaluation Of Radiative Conductivity Inside A Porous Media With The Effect Of Participating Medium Based On Microscale Imaging, Mingping Zheng

Theses and Dissertations--Mechanical and Aerospace Engineering

Space vehicles will experience high loads of heat while entering the planetary atmosphere. At such high temperature, radiation becomes the dominant mode of heat transfer. Since the atmospheric entry environment is nearly impossible to duplicate in a laboratory environment, a numerical model to evaluate thermal performance of the thermal protection system was established. The model simulates the radiative heat transfer process in highly porous media, and the process also takes into account the influence of the participating media. An iterative approach and periodic boundary conditions are used to solve The unbalanced heat flux problem. CT scanned microscale Fiberform and artificial …

Viscoelasticity Of Ptfe-Based Face Seals, Bo Tan

Theses and Dissertations--Mechanical and Aerospace Engineering

PTFE-based materials are widely used in areas of tribology, particularly in seal and bearing applications because of their outstanding self-lubricating properties. Often in dynamic seal applications there is a need for ultra-low mechanical friction loss between the sealing surfaces. Due to its extremely low friction coefficient, there is interest in employing Polytetrafluoroethylene (PTFE) materials in such applications. One challenging aspect of employing PTFE is that these materials are viscoelastic and plastic. This dissertation concentrates on the modeling of viscoelastic material response when used as mechanical face seals with a focus on PTFE-based materials. First, the viscoelastic characteristics are measured through …

Attitude Control And Consensus On So(3) Using Sinusoids: Theory And Application To Small Satellites, Roshan Anandrao Chavan

Theses and Dissertations--Mechanical and Aerospace Engineering

We present and analyze kinematic-level and dynamic-level feedback control algorithms for single agent attitude control and multi-agent attitude consensus on SO(3). The kinematic-level algorithms yield attitude feedback controls that are piecewise-continuous sinusoidal angular velocities. The dynamic-level algorithms yield attitude feedback controls that are relative angles of rotational-mass actuators, which are continuous but only piecewise continuously differentiable sinusoids. Furthermore, the dynamic-level algorithms are designed to accommodate actuator stroke constraint. We present application of the dynamic-level control algorithms to attitude control and consensus of small-satellites.

Study Of Stress-Based Fiber Reorientation Law In A Finite Element Model Of Cardiac Tissue, Alexus Lori Rockward

Theses and Dissertations--Mechanical and Aerospace Engineering

Myofiber organization in the heart plays an important role in achieving and maintaining physiological cardiac function. In many cardiac disease states, myofibers and particularly cardiomyocytes are disorganized in chaotic patterns, a phenotype known broadly as myocardial disarray. In familial hypertrophic cardiomyopathy (HCM), this disorganization in the form of myocyte disarray is thought to contribute to impaired cardiac function and the development of arrhythmia during disease progression. However, the mechanisms regarding fiber reorientation in the heart are yet still unclear, and few adaptative laws have been created to explore these mechanisms. A stretch-based law was developed with the aim of achieving …

Waste Heat Recovery Of Industrial Regenerative Thermal Oxidizer (Rto), A Case Study, James Trimpe Jr.

Theses and Dissertations--Mechanical and Aerospace Engineering

Industrial processes that utilize and release hazardous compounds into the atmosphere are required to break down those compounds before exhausting them from their facilities. An industry-recognized method to break down those hazardous compounds is through thermal oxidation. Thermal oxidation is a process where the compounds are exposed to their auto-ignition temperature in an oxygen-rich environment and combust. The output of thermal oxidation is carbon dioxide, water vapor, and heat. Thermal oxidizers are equipment that performs the thermal oxidation process. The heat output from thermal oxidizers is wasted if directly exhausted into the atmosphere. Regenerative thermal oxidizers (RTOs) use the waste …

Redesigning Products To Optimize Sustainable Performance In Multi-Generational Closed-Loop Production For Advancing The Circular Economy, Buddhika Minendra Hapuwatte

Theses and Dissertations--Mechanical and Aerospace Engineering

Sustainable manufacturing and the circular economy concepts promote efficient and effective resource use to minimize the adverse economic, environmental, and social impacts of alarmingly increasing consumption rates. Product design is the key to implement these transformations in manufacturing. However, the currently available sustainable and circular design methods are not comprehensive and inadequate—especially for multi-generational products. Therefore, designing sustainable products optimized for circular and closed-loop production systems is a challenging task. The 6Rs concept introduced ‘Redesign’ to modify a product’s engineering specifications and allow sustainable utilization of the end-of-use resources from previous generations, thus closing the production loop. Therefore, the objective …