Engineering Commons^™

Predicting Air Quality Near Roadway Intersections Through The Applicat, Brian Kim

Electronic Theses and Dissertations

With substantial health and economic impacts attached to many highway-related projects, it has become imperative that the models used to assess air quality be as accurate as possible. The United States (US) Environmental Protection Agency (EPA) currently promulgates the use of CAL3QHC to model concentrations of carbon monoxide (CO) near roadway intersections. This model uses steady-state and macroscopic methods to model the physical phenomena (e.g., emission rates, atmospheric dispersion, etc.) occurring at intersections. These methods are not straightforward and unintuitive for the users. Therefore, this project investigated the possibility of developing a model that is theoretically more realistic and flexible …

Performance Analysis Of Low-Power, Short-Range Wireless Transceivers, Usha Neupane

Electronic Theses and Dissertations

To address the various emerging standards like BluetoothTM, Home RF, Wi-fiTM (IEEE 802.11), ZigBeeTM etc., in the field of wireless communications, different transceivers have been designed to operate at various frequencies such as 450 MHz, 902-920 MHz, 2.4 GHz, all part of designated ISM band. Though, the wireless systems have become more reliable, compact and easy to develop than before, a detailed performance analysis and characterization of the devices should be done. This report details the performance analysis and characterization of a popular binary FSK transceiver TRF6901 from Texas Instruments. The performance analysis of the device is done with respect …

Modeling Crash Frequencies At Signalized Intersections In Central Flor, Smitha Kowdla

Electronic Theses and Dissertations

A high percentage of highway crashes in the United States occur at intersections. These crashes result in property damage, lost productivity, injury, and even death. Identifying intersections associated with high crash rate is very important to minimize future crashes. The purpose of this study is to develop efficient means to evaluate intersections, which may require safety improvements. The area covered by the analysis in this thesis includes Orange and Seminole Counties and the City of Orlando. The aforementioned counties and city thus represent Central Florida. Each County/City provided data that consisted of signalized intersection drawings that were either in the …

Effects Of Deposition Temperature And Post Deposition Annealing On The Electrical Properties Of Barium Strontium Titanate Thin Film For Embedded Capacitor Applications, Ranganathan, Ravip Peelamedu

Electronic Theses and Dissertations

A higher degree of system level integration can be achieved by integrating the passive components into semiconductor devices, which seem to be an enabling technology for portable communication and modern electronic devices. Greater functionality, higher performance and increase in reliability can be achieved by miniaturizing and reducing the number of components in integrated circuits. The functional potential of small electronic devices can be enormously increased by implementing the embedded capacitors, resistors and inductors. This would free up surface real estate allowing either a smaller footprint or more silicon devices to be placed on the same sized substrate. This thesis focuses …

Performance Of Interface Elements In The Finite Element Method, Kairas Rabadi

Electronic Theses and Dissertations

The objective of this research is to assess the performance of interface elements in the finite element method. Interface elements are implemented in the finite element codes such as MSC.NASTRAN, which is used in this study. Interface elements in MSC.NASTRAN provide a tool to transition between a shell-meshed region to another shell-meshed region as well as from a shell-meshed region to a solid-meshed region. Often, in practice shell elements are layered on shell elements or on solid elements without the use of interface elements. This is potentially inaccurate arising in mismatched degrees of freedom. In the case of a shell-to-shell …

Autonomous Robotic Automation Systemwith Vision Feedback, Jeffery Rosino

Electronic Theses and Dissertations

In this thesis, a full design, development and application of an autonomous robotic automation system using vision feedback is performed. To realize this system, a cylindrical manipulator configuration is implemented, using a personal computer (PC) based PID controller from National Instruments. Full autonomous control will be achieved via a programmable human machine interface (HMI) developed on a PC using Borland C++ Builder. The vision feedback position control is accomplished using an ordinary "off-the-shelf" web camera. The manuscript is organized as follows; After Chapter 1, an introduction to automation history and its role in the manufacturing industry, Chapter 2 discusses and …

Failure Mode Identifications Of Rc Beams Externally Strengthened With, Chris O'Riordan-Adjah

Electronic Theses and Dissertations

The application of carbon reinforced-fiber polymers (CFRP) to structures is a new development that is still under intense research. However, the rehabilitation or retrofit of damage reinforced concrete members by the external bonding of CFRP is becoming increasingly popular in the construction industry. The objective of the tests presented in this thesis is to study different CFRP designs on the reinforced concrete beams and compare their failure modes. The main goal is to determine the CFRP design on the reinforced concrete beams that result in a progressive and gradual failure mode with enough warning before final failure. Different CFRP designs …

Decision Support Model For Construction Crew Reassignments, Angela M. Sist

Electronic Theses and Dissertations

The reassignment of crews on a construction project in response to changes occurs on a frequent basis. The factors that affect the crew reassignment decision can be myriad and most are not known with certainty. This research addresses the need for a decision support model to assist construction managers with the crew reassignment problem. The model design makes use of certainty factors in a decision tree structure. The research helped to determine the elements in the decision tree, the appropriate combination rules to use with the certainty factors, and the method for combining the certainty factors and costs to develop …

Factors Affecting The Practices Of Iso 9001:2000 Quality Management System In Saudi Business Organizations, Mohammad Mesaad Al-Asiri

Electronic Theses and Dissertations

Since it's release in Dec 2000, there has been a slow movement towards the new version of ISO 9001:2000 by ISO 9000:1994 certified organizations. Of the 561,747 ISO 9000 certified businesses, 167,210 are certified under the new ISO 9001:2000, which is less than 30 % of the total ISO 9000 certified companies. Although many studies have been conducted to understand and assess the practices of ISO 9000:1994 standards, no research has been done to investigate the practices of ISO 9001:2000 in Saudi Arabia. This study is designed to investigate the implementation practices of the new ISO 9001:2000 standard in Saudi …

Antenna-Coupled Tunnel Diodes For Dual-Band Millimeter-Wave/Infrared F, Mohamed Abdel Rahman

Electronic Theses and Dissertations

The infrared and millimeter-wave portions of the spectrum both have their advantages for development of imaging systems. Because of the difference in wavelengths, infrared imagers offer inherently high resolution, while millimeter-wave systems have better penetration through atmospheric aerosols such as fog and smoke. Shared-aperture imaging systems employing a common focal-plane array that responds to both wavebands are desirable from the viewpoint of overall size and weight. We have developed antenna-coupled sensors that respond simultaneously at 30 THz and at 94 GHz, utilizing electron-beam lithography. Slot-antenna designs were found to be particularly suitable for coupling radiation into metal-oxide-metal (MOM) tunnel diodes …

Self Designing Pattern Recognition System Employing Multistage Classification, Manal M. Abdelwahab

Electronic Theses and Dissertations

Recently, pattern recognition/classification has received a considerable attention in diverse engineering fields such as biomedical imaging, speaker identification, fingerprint recognition, etc. In most of these applications, it is desirable to maintain the classification accuracy in the presence of corrupted and/or incomplete data. The quality of a given classification technique is measured by the computational complexity, execution time of algorithms, and the number of patterns that can be classified correctly despite any distortion. Some classification techniques that are introduced in the literature are described in Chapter one. In this dissertation, a pattern recognition approach that can be designed to have evolutionary …

Finite Element Analysis Of Left-Handed Waveguides, Balasubramaniam, Vellakkinar

Electronic Theses and Dissertations

In this work, waveguides with simultaneous negative dielectric permittivity and magnetic permeability, otherwise known as left-handed waveguides, are investigated. An approach of formulating and solving an eigenvalue problem with finite element method resulting in the dispersion relation of the waveguides is adopted in the analysis. Detailed methodology of one-dimensional scalar and two-dimensional vector finite element formulation for the analysis of grounded slab and arbitrary shaped waveguides is presented. Based on the analysis, for waveguides with conventional media, excellent agreement of results is observed between the finite element approach and the traditional approach. The method is then applied to analyze left-handed …

A Mobile Robotic Computing Platform For Three-Dimensional Indoor Mappi, Kenneth Mccoig

Electronic Theses and Dissertations

There are several industries exploring solutions to quickly and accurately digitize unexplored indoor environments, into useable three-dimensional databases. Unfortunately, there are inherent challenges to the indoor mapping process such as, scanning limitations and environment complexity, which require a specific application of tools to map an environment precisely with low cost and high speed. This thesis successfully demonstrates the design and implementation of a low cost mobile robotic computing platform with laser scanner, for quickly mapping with high resolution, urban and/or indoor environments using a gyro-enhanced orientation sensor and selectable levels of detail. In addition, a low cost alternative solution to …

Topology And Control Investigation For Low-Voltage High-Current Isolated Dc-Dc Converters, Hong Mao

Retrospective Theses and Dissertations

High conversion efficiency and fast transient response at high switching frequency are the two main challenges for low-voltage high-current DC-DC converters, which are the motivations of the dissertation work.

To reduce the switching power loss, soft switching is a desirable technique to keep power loss under control at high switching frequencies. A Duty-Cycle-Shift (DCS) concept is proposed for half-bridge DC-DC converters to reduce switching loss. The concept of this new control scheme is shifting one of the two symmetric PWM driving signals close to the other, such that ZVS can be achieved for the lagging switch due to the shortened …

Nonlinear Adaptive Estimation Andits Application To Synchronization Of Lorenz System, Yufang Jin

Electronic Theses and Dissertations

Synchronization and estimation of unknown constant parameters for Lorenz-type transmitter are studied under the assumption that one of the three state variables is not transmitted and that transmitter parameters are not known apriori. An adaptive algorithm is proposed to estimate both the state and system parameters. Since Lorenz system shows the property of sensitivity to initial conditions and evolves in different mode with parameter variation, an equivalent system is introduced. The adaptive observer is designed based on this equivalent system without any requirement on initial conditions of the observer. It is shown by Lyapunov arguments and persistent excitation analysis that …

Chemical Structure - Nonlinear Optical Property Relationships For A Series Of Two-Photon Absorbing Fluorene Molecules, Joel Mccajah Hales

Electronic Theses and Dissertations

This dissertation reports on the investigation of two-photon absorption (2PA) in a series of fluorenyl molecules. Several current and emerging technologies exploit this optical nonlinearity including two-photon fluorescence imaging, three-dimensional microfabrication, site-specific photodynamic cancer therapy and biological caging studies. The two key features of this nonlinearity which make it an ideal candidate for the above applications are its quadratic dependence on the incident irradiance and the improved penetration into absorbing media that it affords. As a consequence of the burgeoning field which exploits 2PA, it is a goal to find materials that exhibit strong two-photon absorbing capabilities. Organic materials are …

Effect Of Coriolis And Centrifugal Forces On Turbulence And Transport At High Rotation And Buoyancy Numbers, Ahmad Khalaf Sleiti

Electronic Theses and Dissertations

This study attempts to understand one of the most fundamental and challenging problems in fluid flow and heat transfer for rotating machines. The study focuses on gas turbines and electric generators for high temperature and high energy density applications, respectively, both which employ rotating cooling channels so that materials do not fail under high temperature and high stress environment. Prediction of fluid flow and heat transfer inside internal cooling channels that rotate at high rotation number and high density ratio similar to those that are existing in turbine blades and generator rotors is the main focus of this study. Both …

Partitioning A Graph In Alliances And Its Application To Data Clustering, Khurram Hassan-Shafique

Electronic Theses and Dissertations

Any reasonably large group of individuals, families, states, and parties exhibits the phenomenon of subgroup formations within the group such that the members of each group have a strong connection or bonding between each other. The reasons of the formation of these subgroups that we call alliances differ in different situations, such as, kinship and friendship (in the case of individuals), common economic interests (for both individuals and states), common political interests, and geographical proximity. This structure of alliances is not only prevalent in social networks, but it is also an important characteristic of similarity networks of natural and unnatural …

Evolutionary Optimization Of Support Vector Machines, Fred Gruber

Electronic Theses and Dissertations

Support vector machines are a relatively new approach for creating classifiers that have become increasingly popular in the machine learning community. They present several advantages over other methods like neural networks in areas like training speed, convergence, complexity control of the classifier, as well as a stronger mathematical background based on optimization and statistical learning theory. This thesis deals with the problem of model selection with support vector machines, that is, the problem of finding the optimal parameters that will improve the performance of the algorithm. It is shown that genetic algorithms provide an effective way to find the optimal …

Selective Mode Excitation In Specialty Waveguides Using Micro Optical, Waleed Mohammed

Electronic Theses and Dissertations

Although optical fibers and specialty waveguides are the base of majority of today's telecom and light delivery applications, fabrication deformation, nonlinearity and attenuation limit the bandwidth of the data being transmitted or the amount of power carried by these systems. One-way to overcome these limitations without changing the fibers design or fabrication is to engineer the input light in order to excite a certain mode or a group of modes with unique optical properties. Diffractive and micro optics are highly effective for selectively coupling light to specific modes. Using micro optics, mode selective coupling can be achieved through several matching …

Discrete Nonlinear Wave Propagation In Kerr Nonlinear Media, Joachim Meier

Electronic Theses and Dissertations

Discrete optical systems are a subgroup of periodic structures in which the evolution of a continuous electromagnetic field can be described by a discrete model. In this model, the total field is the sum of localized, discrete modes. Weakly coupled arrays of single mode channel waveguides have been known to fall into this class of systems since the late 1960's. Nonlinear discrete optics has received a considerable amount of interest in the last few years, triggered by the experimental realization of discrete solitons in a Kerr nonlinear AlGaAs waveguide array by H. Eisenberg and coworkers in 1998. In this work …

Investigation Of Nascar Restrictor Plate Manifold Insert Using Wave Engine Simulation And Response Surface Methodology, John Mason Gross Iii

Electronic Theses and Dissertations

With the increasing growth in computer processing power, computer based computational fluid dynamics simulations are finding increasing acceptance and use in the field of internal combustion engine development. Once fully developed, such simulations provide detailed and expedient tools for testing existing theories, as well as new ideas. While numerous studies on wave propagation and fluid flow in intakes manifolds exist, most restrict the analysis to a single intake runner and port, examining only the dynamics from the runner-to-plenum junction downstream to the valve. While such analyses provide comprehensive models for wave propagation dynamics in the runner, little is published on …

Slurry Chemistry Effects On Copper Chemical Mechanical Planarization, Ying Luo

Electronic Theses and Dissertations

Chemical-mechanical Planarization (CMP) has emerged as one of the fastest-growing processes in the semiconductor manufacturing industry, and it is expected to show equally explosive growth in the future (Braun, 2001). The development of CMP has been fueled by the introduction of copper interconnects in microelectronic devices. Other novel applications of CMP include the fabrications of microelectromechanical systems (MEMS), advanced displays, three dimensional systems, and so on (Evans, 2002). CMP is expected to play a key role in the next-generation micro- and nanofabrication technologies (Singh, et al., 2002). Despite the rapid increase in CMP applications, the fundamental understanding of the CMP …

Ocr: A Statistical Model Of Multi-Engine Ocr Systems, Mercedes Terre Mcdonald

Electronic Theses and Dissertations

This thesis is a benchmark performed on three commercial Optical Character Recognition (OCR) engines. The purpose of this benchmark is to characterize the performance of the OCR engines with emphasis on the correlation of errors between each engine. The benchmarks are performed for the evaluation of the effect of a multi-OCR system employing a voting scheme to increase overall recognition accuracy. This is desirable since currently OCR systems are still unable to recognize characters with 100% accuracy. The existing error rates of OCR engines pose a major problem for applications where a single error can possibly effect significant outcomes, such …

Sinbad Automation Of Scientific Process: From Hidden Factor Analysis To Theory Synthesis, Olcay Kursun

Electronic Theses and Dissertations

Modern science is turning to progressively more complex and data-rich subjects, which challenges the existing methods of data analysis and interpretation. Consequently, there is a pressing need for development of ever more powerful methods of extracting order from complex data and for automation of all steps of the scientific process. Virtual Scientist is a set of computational procedures that automate the method of inductive inference to derive a theory from observational data dominated by nonlinear regularities. The procedures utilize SINBAD – a novel computational method of nonlinear factor analysis that is based on the principle of maximization of mutual information …

Conformal Tracking For Virtual Environments, Larry Dennis Davis Jr.

Electronic Theses and Dissertations

A virtual environment is a set of surroundings that appears to exist to a user through sensory stimuli provided by a computer. By virtual environment, we mean to include environments supporting the full range from VR to pure reality. A necessity for virtual environments is knowledge of the location of objects in the environment. This is referred to as the tracking problem, which points to the need for accurate and precise tracking in virtual environments. Marker-based tracking is a technique which employs fiduciary marks to determine the pose of a tracked object. A collection of markers arranged in a rigid …

Design And Hardware Implementation Of A Novel Scrambling Security Algorithm For Robust Wireless Local Area Networks, Mohit Jagetia

Electronic Theses and Dissertations

The IEEE802.11 standard for wireless networks includes a Wired Equivalent Privacy (WEP) protocol, which is a popular wireless secure communication stream cipher protocol approach to network security used to protect link-layer communications from eavesdropping and other attacks. It allows user to communicate with the user; sharing the public key over a network. It provides authentication and encrypted communications over unsecured channels. However, WEP protocol has an inherent security flaw. It is vulnerable to the various attacks, various experiments has proved that WEP fails to achieve its security goals. This thesis entails designing, evaluating and prototyping a wireless security infrastructure that …

Non-Destructive Microstructural Evaluation Of Yttria Stabilized Zirconia, Nickel Aluminides And Thermal Barrier Coatings Using Electrochemical Impedance Spectroscopy, Srinivas Vishweswaraiah

Electronic Theses and Dissertations

There has been an urge for increasing the efficiency in advanced gas turbine engines. To fulfill these needs the inlet gas temperatures should be increased in the gas turbine engines, thermal barrier coatings (TBCs) have gained significant applications in increasing the gas inlet temperatures. Insulating characteristics of ceramic TBCs allow the operation at up to 150~250 ˚C higher gas temperatures. Because of the severe turbine engine operating conditions that include high temperature, steep temperature gradient, thermal cycling, oxidation and hot-corrosion, TBCs can fail by spallation at the interface between the metal and ceramic. The lack of understanding in failure mechanisms …

Modifications To The Fuzzy-Artmap Algorithm For Distributed Learning In Large Data Sets, Jose R. Castro

Electronic Theses and Dissertations

The Fuzzy–ARTMAP (FAM) algorithm has been proven to be one of the premier neural network architectures for classification problems. FAM can learn on line and is usually faster than other neural network approaches. Nevertheless the learning time of FAM can slow down considerably when the size of the training set increases into the hundreds of thousands. In this dissertation we apply data partitioning and network partitioning to the FAM algorithm in a sequential and parallel setting to achieve better convergence time and to efficiently train with large databases (hundreds of thousands of patterns). We implement our parallelization on a Beowulf …

Evaluation Of The Potential Benefits To Traffic Operations At A Toll Plaza With Express Etc Lanes, Eric Anthony Gordin

Electronic Theses and Dissertations

The effectiveness of modifying a conventional toll plaza for implementation of an open road tolling concept with express ETC lanes was evaluated in this thesis. Speed controlled dedicated ETC lanes were replaced with express ETC lanes at the Orlando-Orange County Expressway Authority (OOCEA) University Mainline Toll Plaza. This evaluation was accomplished by utilizing collected field data and simulated scenarios using Toll Plaza SIMulation (TPSIM) software developed by the University of Central Florida. The speed controlled dedicated ETC lanes were located within toll lanes (contained within a toll plaza canopy) with widths ranging between 10 to 14 ft. These types of …