Engineering Commons^™

Reflection Anistropy Spectroscopy Study Of The Near Surface Electric Field In Low-Temperature Grown Gaas (001), Todd Holden, Fred H. Pollak, J. L. Freeouf, D. Mcinturff, J. L. Gray, Mark S. Lundstrom, J. M. Woodall

Department of Electrical and Computer Engineering Faculty Publications

We have evaluated an ‘‘effective depletion width’’ of =< 45 Å and the sign (n-type/upward band bending) of the near surface electric field in low-temperature grown GaAs ~001! using the optical method of reflection anisotropy spectroscopy in the vicinity of the spin-orbit split E₁ , E₁ + Delta₁ optical features. Our results provide evidence that surface Fermi level pinning occurs for air exposed (001) surfaces of undoped low temperature grown GaAs.

Technique For Measurement Of The Minority Carrier Mobility With A Bipolar Junction Transistor, S. L. D'Souza, Michael R. Melloch, Mark S. Lundstrom, E. S. Harmon

Department of Electrical and Computer Engineering Faculty Publications

A simple technique to measure the minority carrier mobility using a bipolar junction transistor is demonstrated. By fixing the base-emitter voltage, the carrier injection into the base is constant. The collector current is then monitored as a function of a magnetic field applied perpendicular to the current transport across the base. The magnetic field leads to an increase in base transit time and a corresponding decrease in collector current. From the resulting fractional change in collector current, the minority carrier mobility in the base can be determined. For narrow base transistors, quasiballistic transport across the base must be taken into …

Electrical Characteristics Of Nearly Relaxed Inas/Gap Heterojunctions, E H. Chen, T. P. Chin, J. M. Woodall, Mark S. Lundstrom

Department of Electrical and Computer Engineering Faculty Publications

The electrical properties of lattice mismatched InAs/GaP heterojunctions are examined. In spite of a high dislocation density at the heterointerface, the current versus voltage characteristics show nearly ideal behavior with low reverse leakage currents and high breakdown voltages. The forward currentvaried exponentially with bias displaying ideal factors of 1.10 or less. Band offsets estimated from current–voltage and capacitance–voltage analysis are consistent with previous estimates based on differences in Schottky barrier heights.

Study Of Side Ditch Liners For Highway Application, Anthony S. Calderon, Philippe L. Bourdeau

JTRP Technical Reports

Over the past few years, the INDOT new materials department has received numerous erosion control products (mostly geosynthetics) to evaluate as alternatives to riprap and concrete in ditch liners. Potential benefits include lower construction costs and better aesthetics over current products. Unfortunately, no specification, design methodology, or classification system currently exists for these erosion control blankets.

In this project's phase I, existing information and knowledge on erosion control materials used to line highway side drainage ditches were investigated. From the available technical1iterature (journal and conference publications, other DOTs specifications, manufacturer documentation, independent test laboratory test data), design methodologies, classification system, …

Testing Of Multi-Span Bridges With Full Span Precast Prestressed Concrete Panels (Phase 1), Robert J. Peterman, J. A. Ramirez

JTRP Technical Reports

The purpose of this study was to assess the behavior and durability of multi-span bridges constructed with full-span prestressed concrete form panels. The use of full-span prestressed concrete form panels for bridges with spans of 40 ft. or less is an economical method of construction due to the reduction of on-site formwork and labor required by alternate cast-in-place systems. In this research, a pair of two-span bridges utilizing full-span prestressed concrete form panels were fabricated and tested in the Karl H. Kettelhut Structural Engineering Laboratory at Purdue University. Time-dependent effects were monitored during the cast-in-place (CIP) concrete cure period of …

Development Of A Congestion Management System For Indiana, Robert K. Whitford, Jennifer L. Opsuth

JTRP Technical Reports

This study details a procedure used in determinng links with deficiencies. A procedure was developed by means of which congestion on raodways links can be identified as being congested will be subjected to a more detailed study to determine extent, duration, and severity of congestion. The procedure was developed by the use of the Highway C apacity Manual (HCM) and the Indiana Department of Transportation's (INDOT) Road Inventory Data Base.

Development And Operation Of Buried Channel Charge Coupled Devices In 6h Silicon Carbide, Scott T. Sheppard, Michael R. Melloch, James A. Cooper Jr.

Department of Electrical and Computer Engineering Technical Reports

Silicon carbide is a wide bandgap semiconductor that is well suited for high power, high temperature electronic devices due to its remarkable electronic and thermal properties. Photosensitive devices in the 6H polytype of Sic have also been demonstrated, showing high sensitivity in ultraviolet wavelengths near 270 nm. Furthermore, the native oxide on Sic is silicon dioxide, meaning that SIC can be thermally oxidized to form a high quality gate dielectric, making metal-oxide-semiconductor (MOS) devices possible. These qualities make silicon carbide ideal for constructing UV sensitive CCD imagers. 'This work investigates the feasibility for developing imagers in Sic through the fabrication …

The Analysis, Simulation, And Implementation Of Control Strategies For A Pulsewidth Modulated Induction Motor Drive, Scott D. Roller, Chee Mun Ong

Department of Electrical and Computer Engineering Technical Reports

The purpose of this research is to analyze, simulate, and compare two different control strategies for a variable speed pulsewidth modulated induction motor drive, and implement one of the control strategies using the Motorola MC68F333 inicrocontroller. The two strategies examined in this technical report are volts per hertz control and field oriented control. The benefits and limitations of each strategy are examined through theoretical analysis. Verification of the analysis is performed by simulating thc strategies usmg the Simulink toolbox of Matlab. The Motorola microcontroller is then used to generate both edge-aligned and center-aligned pulsewidth modulated drive signals for a three …

An Electronic Surveillance And Control System For The Management Of Traffic On The Borman Expressway, Part Ii: Calibrating A Simulation Model, Mu-Han Wang, Michael J. Cassidy

JTRP Technical Reports

The purpose of this project was to calibrate a freeway simulation model to emulate traffic operating conditions on the Borman Expressway in Northwest Indiana. To replicate Borman operating conditions, the project adopted Integrated Traffic Simulation (INTRAS), a microscopic, stochastic freeway simulation model. Appropriate input data were developed on geometric, traffic and driver behavior information, based on physical measurements and other available data. The model was calibrated and statistical analysis were conducted to validate the accuracy of the results.

Automation Of Overweight Truck Permit Process For Michigan Trains, Robert K. Whitford, David P. Moffett

JTRP Technical Reports

Technical guidance was provided by Purdue University to the Indiana Department of Transportation regarding specific issues around automation of permit issuance for overweight and oversized vehicles on a specific piece of highway in Northwest Indiana. Supporting this guidance were four commentaries which were: 1. Functional Specification for Automation of Michigan Trains 2. Draft Commentary on Touch ToneTM/Voice Response System Security for Michigan Trains 3. Draft Commentary on Touch ToneTM/Voice Response System Vendor for Michigan Trains 4. Draft Commentary on Touch ToneTM/Voice Response System Auditability for Michigan Trains These are included as appendices to this report.

Bioremediation Treatability Studies For Soils Containing Herbicides, Chemicals, And Petroleum Products, Loring F. Nies, Matthew B. Mesarch

JTRP Technical Reports

Leaking underground storage tanks are widespread throughout the United States. It is estimated that there are 1.4 million underground gasoline storage tanks in the United States, with as many as 75,000 to 100,000 that may be leaking. In Indiana alone, more than 3,500 of the 15,000 registered underground storage tank facilities have reported leaks. Conventional remediation methods often involve pump-and-treat schemes for contaminated water, and excavation and burial of contaminated soil in hazardous waste landfills. These methods increase the risk of exposure to pollutants for workers and local residents. Furthermore, these methods merely involve the transfer of pollutants from one …

Analysis And Load Testing Of Two Steel Through Truss Bridges In Indiana, Brian Joseph Malone, Mark A. Heffron, J. A. Ramirez, Donald W. White

JTRP Technical Reports

Results of the load tests of two steel through truss bridges were used to evaluate the assumptions used by BARS for the rating of this type of bridge. Based on the results from this study it is recommended that the Indiana Department of Transportation use the load distribution factors in the 1994 LRFD Specifications in the rating of these bridges. This will imply replacing the load distribution factors currently in BARS. The implementation of the new distribution factors will result in a less conservative rating of the longitudinal beams in this type of bridge. The increase in the allowed moments …

Effective Scheduling Of Road And Bridge Closures: Phase 2, Kumares C. Sinha, Mithilesh K. Jha

JTRP Technical Reports

This research provides a study on work zone impact analysis. In case of multiple road closures, the network approach is used to find an effective scheduling such that the total user delay is reduced. A dynamic model for analyzing the work zone impact during the period when network is in transition state is also developed. A salient feature of the dynamic model is drives’ perception updating model, which incorporates availability and the quality of information as perceived by drivers.

Impact Analysis Of Vehicles On Ozone Generation In The Indianapolis Metropolitan Statistical Area, Robert Bertram Jacko, Ouattara Fatogoma

JTRP Technical Reports

Motor vehicles are one of the largest emitters of ground-level ozone precursors – volatile organic compounds (VOCs) and nitrogen oxides (NO1) – into the atmosphere. Consequently, the Clean Air Act Amendment of 1990 requires the implementation of transportation control measures in order to reduce ground-level ozone precursor emissions and alleviate the ozone air quality problems. This research investigates the relative effects of motor vehicle emissions of VOCs and NO1 on hourly average concentrations of ground level ozone in the Indiana Airshed Model (UAM-IV). The findings of the research study are presented. This includes the results of the data analyses leading …

Indot Constructability Multimedia System Working Module, Bob G. Mccullouch

JTRP Technical Reports

Constructability can be defined as incorporating knowledge into the design product or designing so it is easier to construct. Transportation facilities have suffered from this problem, with INDOT no exception. The most important feature of any constructability program is capturing field examples, commonly referred to as “lessons learned,” and archiving and retrieving them into future projects that are either similar or have similar conditions in order to eliminate or prevent the same mistakes from occurring again. A mechanism or tool that can perform this task would be a valuable asset for INDOT. A previous JHRP project title “An INDOT Lessons …

Laboratory Study On The Use Of Tire Shreds And Rubber-Sand In Backfilled And Reinforced Soil Applications, Andres Bernal, C. W. Lovell, Rodrigo Salgado

JTRP Technical Reports

Millions of scrap tires are discarded annually in the United States, the bulk of which are currently landfilled or stockpiled. This consumes valuable landfill space, or, if improperly disposed, creates a fire hazard and provides a prolific breeding ground for rats and mosquitoes. The use of tire shreds as lightweight fill material can sharply reduce the tire disposal problem. The present study, based on laboratory testing and numerical modeling examines the feasibility of incorporating tire shreds and rubber-sand mixtures as lightweight geomaterial in embankments and backfills. The growing interest in utilizing waste materials in civil engineering applications has opened the …

Borman Expressway Atms Equipment Evaluation, J. V. Krogmeier, Kumares C. Sinha, Michael P. Fitz, Srinivas Peeta, Shimon Y. Nof

JTRP Technical Reports

An Advanced Traffic Management System (ATMS) is under development in northern Indiana by the Indiana Department of Transportation (INDOT) in conjunction with Hughes Transportation Management Systems. The study area comprises a sixteen mile segment of the heavily used Borman Expressway and its associated corridor; beginning at the Indiana/Illinois border and stretching east to the Indiana Toll Road interchange. The most important operational problem on the Borman is non-recurrent congestion, arising primarily through accidents and stalled vehicles. In order to mitigate the significant bottleneck delay problems due to non-recurrent congestion, INDOT is developing an ATMS for real-time incident detection and response …

Estimating Statewide Trip Tables From Vehicle Classification Counts, James Yang, Jon D. Fricker

JTRP Technical Reports

Although a statewide trip table is an important ingredient in the statewide planning process, such information is difficult to obtain. The study described in this report investigated the applicability to the state-level problem of existing software developed to estimate trip tables in urban areas (or smaller) from link counts. Criteria that would form the basis for determining the applicability of any particular software package were developed. Packages such as The Highway Emulator (THE), PC-LINKOD, and Fast Matrix Calibration (FMC) were tested using small and medium sized networks. Because FMC performed the best on these tests, it was applied to the …

Environmental Bioassay Evaluation Of Foundry Waste Residuals, Kenneth Chad Bastian, James E. Alleman

JTRP Technical Reports

Although the constructive reuse of foundry residuals represents a decidedly beneficial goal with distinct economic and environmental benefits, potential end-users are nonetheless reluctant to use these residuals, given an inherent concern about potential unforeseen environmental liabilities. Results of foundry residual leachate characterization to date strongly suggest that many ferrous foundries are discarding sands whose quality is fully amenable to their future use with embankment construction and related high-volume highway development activities. In order to provide additional assurance as to the environmental impact of foundry residual reuse, the MicrotoxTM bioassay has been used to quantify the response of living organisms (e.g., …

Remediation Of Hazardous Effluent Emitted From Beneath Newly Constructed Road Systems And Clogging Of Underdrain Systems, Ronald Fred Wukasch, Adil Siddiqui

JTRP Technical Reports

The Indiana Department of Transportation uses recycled concrete pavement as aggregate for the construction of highways. The effluent from these pavements has a high pH. The high pH effluent can cause clogging of drains and vegetative kill around the outlet. This project looks into the source of the effluent water, its chemical composition and the approximate duration the problem can be expected to persist. The project also investigates possible methods for reduction of the problem in future installation. The approximate additional cost of these solutions and the problems associated with them are discussed as well.

Development Of A Procedure To Identify Aggregates For Bituminous Surfaces In Indiana, Douglas W. Bruner, Jung Chan Choi, Terry R. West

JTRP Technical Reports

Adequate friction resistance is needed to prevent pavement slipperiness and to allow vehicles to stop in a reasonable distance. In stone mastic asphalt surfaces, friction resistance is mainly a function of the interaction between the aggregates exposed at the road surface and the vehicle tires. Performance of the aggregate is reduced over time by wear and polishing as a consequence of vehicular traffic. In this research a method to investigate aggregate performance based on physical, chemical and petrographic factors has been evaluated. The objective was to develop a laboratory method to test Indiana dolomite, limestone, sandstone, and gravel aggregates to …

Using Pyrolized Carbon Black (Pcb) From Waste Tires In Asphalt Pavement (Part 2, Asphalt Binder), Yongdong Zeng, C. W. Lovell

JTRP Technical Reports

Scrap tires derived from automobiles have become a large environmental problem in the United States. In this study, research is carried out to investigate the potential use of tire-derived pyrolyzed carbon black from scrap tires as an asphalt cement modifier. The asphalt cements used in this research were AC10 and AC20. Penetration and softening point tests were performed to obtain the consistency of the asphalt cements. The pyrolyzed carbon black, as provided by Wolf Industries, was combined with the asphalt cement in the following percentages; 5%, 10%, 15% and 20%. Penetration, softening point and ductility tests were performed to determine …

1996 Directory Of Indiana State, County, City And Town Officials Responsible For Road And Street Work, Herpicc

Indiana Local Technical Assistance Program (LTAP) Directory

Contact information for agency officials and employees responsible for Indiana’s local road infrastructure.

Sources, Measurements, And Effects Of Segregated Hot Mix Asphalt Pavement, Ronald. Christopher Williams, Gary R. Duncan, Thomas D. White

JTRP Technical Reports

There are several factors that lead to segregation. Segregation can occur during stockpiling and handling of aggregate and during mixing, storage, transport and lay down of the asphalt mixture. Sometimes segregation may result from a single source or from a combination of sources. Nondestructive test methods have been examined to determine their effectiveness in detecting segregation. These methods include thermal imaging, air penneability, nuclear moisture (asphalt) and density, and permittivity. Based on the effective of these technologies in a laboratory environment, the standard moisture/density nuclear gauge technology was field tested with a high degree of success. Use of four minute …

Use Of Coal Combustion Residues And Foundry Sands In Flowable Fill, Subnahmanya T. Bhat, C. W. Lovell

JTRP Technical Reports

The purpose of the present study is to investigate the use of waste foundry sand in flowable fill. However, the concepts developed are applicable to flowable fills containing any type of sand. Even though the flowable fill is presently popular as a trench filling material, this study addresses a much broader perspective in order to be able to develop uses of this material in geotechnical applications. In this research, only green sands were taken. The fly ash used was class F type. Flowability, hardening characteristics and 28-day unconfined compressive strength are studied. A rational approach the mix design of flowable …

Wildflowers For Indiana Highways, Michael N. Dana, Ricky Darrell Kemery, Brian S. Boszor

JTRP Technical Reports

Questions concerning wildflower usage on Indiana highway rights-of-way were investigated. Native prairie wildflower seed quality was found to be highly variable among supply companies, species, and years. Less variability was found among “garden” wildflower species and suppliers. Direct seeding was found to be successful with six species of native prairie forbs: Butterfly Milkweed Asclepiads tuberose, Wild Bergamot Monarda fistulosa, New England Aster Aster novae-angliae, Pale-purple Coneflower Echinacea pallida, Gray-headed Coneflower Ratibido pinnota, Ironweed Vernonia fasciculosa. Five species of “garden” wildflowers performed well: Common Cosmos Cosmos bipinnatus, Yellow Cosmos Cosmos sulphureus, Cornflower Centaurea cyanus, Goldenwave Coreopsis sincioria, Black-eyed Susan Rudbeckia hiria. …

Performance Evaluation Of Highway Embankment Constructed Using Coal Ash, James E. Alleman, Patrick J. Fox, Daniel J. Debattista

JTRP Technical Reports

The objective of this project was to assess the environmental and geotechnical performance of two highway embankments constructed using coal combustion fly ash. The environmental work focused on characterizing monitoring well water samples from the site before, during, and after construction. In addition, a number in in-situ lysimeter water samples were also tested during and after construction. In each case, water samplers were evaluated in terms of their constitutive organic and metal concentrations, as well as their relative bioassay response using a MicrotoxTM protocol. The geotechnical work included monitoring of ash water content and unit weight during placement, settlement analysis, …

Seismic Evaluation Of Highway Bridges - Phase 1, J. A. Ramirez, Austin D. Pan, Frank Thompson Mwakasisi

JTRP Technical Reports

The primary objective of the study was to establish the guidelines for screening, assessing, and ranking Indiana bridges for seismic upgrade. The outcome of the study is a complete strategy for the detailed structural assessment of Indiana highway bridges subjected to seismic forces. The structural evaluation is conducted using a nonlinear time-history analysis of the bridge for simulated or actual records. The specific soil conditions at the site are accounted in terms of the ground motion. From the time history analysis the maximum structural response including displacements, bending moments, shear and axial forces are computed. A weighted evaluation of the …

The Use Of Pyrolized Carbon Black As An Additive (Part 3: Air Cooled Furnace Slag), Kwan-Ho Lee, C. W. Lovell, Rodrigo Salgado

JTRP Technical Reports

The purpose of this research was to characterize the fundamental properties and to evaluate the performance of asphalt mixtures modified by pyrolyzed carbon black (CBp) as an additive and air-cooled furnace slag as a coarse aggregate. Laboratory tests were conducted at INDOT and Koch Materials. The optimum binder content and the relationship of density and voids were determined from Marshall mix design. The rang of optimum binder content was 6.3% to 7.8%. The Marshall stability as a strength value and flow increased within the accepted ranges due to the inclusion of CBp. The gyratory tests were conducted by the US …

Using Pyrolized Carbon Black (Pcb) From Waste Tires In Asphalt Pavement (Part 1, Limestone Aggregate), Taesoon Park, C. W. Lovell

JTRP Technical Reports

This study presents the viability of using PCB as an additive in hot mix asphalt concrete. Different ratios of PCB (5%, 10%, 15%, and 20% by weight of asphalt) were blended with two grades of asphalt (AC-10 and AC-20). The complete behaviors of the PCB modified asphalt concrete were investigated by comprehensive laboratory testing and evaluation. The Marshall method was used to determine the optimum binder content and the mechanical properties and void relationships were investigated by this method. The Gyratory Testing Machine was used to define the stress-strain relationships of the PCB mixtures. The rutting potential of PCB mixtures …