Engineering Commons^™

Code Optimization For Phase Field Method, Sergio Andres Monsalve, Marisol Koslowski

The Summer Undergraduate Research Fellowship (SURF) Symposium

The Phase field model method for studying grain dislocation at atomic level after applying an external force to the materials being tested, enables simulate the behavior of different materials after applying stress. With the appropriate numerical method the simulation could change drastically the complexity of the algorithm. Finding the most accurate and stable numerical method for the phase field model give us a considerable improving in the performance of the code used to simulate the phase field dynamic dislocation in larger and more complex simulations can be performed. We made an statistic comparison between the different methods, comparing stability and …

Testing Of Gelled And Neat Hypergolic Propellants, Bhuvi Swarna Nirudhoddi, Timothee Pourpoint

The Summer Undergraduate Research Fellowship (SURF) Symposium

Hypergolic propellants (hypergols) are propellants that ignite shortly after contact. They omit the requirement of an ignition system, making hypergolic engines simple, reliable and capable of being throttled several times. These advantages make them desirable for deep space missions. However, the applications are severely limited by their toxicity and reactivity. In an effort to increase the safety of manufacturing, shipping, and storing, these propellants can be combined with different gelling agents. The focus of this project is to build an optically accessible combustion chamber pressurized at 200 psi to compare the performance of gelled and neat Monomethyl Hydrazine (MMH) and …

Adhesive Elastomeric Proteins, Haefa Mansour, Julie Liu

The Summer Undergraduate Research Fellowship (SURF) Symposium

Sutures and staples commonly used to close surgical wounds tend to be much stiffer than the surrounding tissue, often resulting in external tissue damage. Surgical adhesives provide a promising alternative to these sutures and staples. Ideal surgical adhesives are biocompatible, able to set well and remain sticky in moist conditions, possess strong adhesive and cohesive properties, and exhibit mechanical properties that mimic those of the surrounding tissue. Unfortunately, the adhesives available today are unable to satisfactorily meet all of these criteria. We are utilizing protein engineering techniques to design, create, and test a new surgical adhesive that combines the adhesive …

Photolithography In Fabrication Of Thin-Film Solar Cells, Yusheng Zhu, Rakesh Agrawal

The Summer Undergraduate Research Fellowship (SURF) Symposium

Solar energy has steadily increased its efficiency and cost-effectiveness throughout the past three decades and seems poised to compete with current primary energy (natural gas, oil, coal) as the need for alternative energy sources rises. One type of solar cell, thin-film cells, often relies on use of permanent photomasks in order to imprint a pattern onto the front metal contact. However, these machined metal masks are rigid and do not allow for different designs to be explored as current masks encounter difficulties in machining grids thin enough for optimization. Photolithography, traditionally used in the microfabrication field, provides a method in …

Direct Simulation Monte Carlo Simulation Toolkit For Equilibrium (0d) And Planar Couette Flow (1d), Austin I. Saragih, Alina A. Alexeenko

The Summer Undergraduate Research Fellowship (SURF) Symposium

Visualized simulation tool of Direct Simulation Monte Carlo (DSMC) is essential in aeronautical engineering and gas dynamics, by presenting information that can educate engineers and scientists to preliminarily understand the molecular gas dynamics and direct simulation of gas flows. Two educational tools and models are described for rarified gas flows and simulated particle collisions. A 0-Dimensional DSMC in approach to translational equilibrium was developed to simulate the speed distribution over time and the comparison between the final distribution and the Maxwell-Boltzmann distribution. A 1-Dimensional DSMC for Planar Couette flow was also developed to calculate the number of strikes of the …

Insights Into The Effect Of Geometrical Parameters In The Mechanical Properties Of The Radular Teeth Of The Cryptochiton Stelleri – A 3d Print Approach, Chan Jeong, Enrique Escobar, Pablo Zavattieri Dr.

The Summer Undergraduate Research Fellowship (SURF) Symposium

The Cryptochiton Stelleri is known to have ultra-hard radular teeth that have one of the largest hardness (9-12GPa) and stiffness (90-125GPa) among other biological materials such as Enamel and Abalone shell. The ultrastructure of the teeth is formed by a bundle of highly mineralized rods composed of iron oxides and organic material. The main method to measure the material properties has been through nanoindentation. However there are limitations to nanoindentation of the Chiton’s teeth such as limited equipment, costly and time consuming preparation of the samples, and observation of nanoscale features being difficult. In this work, the rod-like microstructure of …

Deep-Water Near-Bottom Turbulence In Lake Michigan: An Underwater Investigation, David J. Cannon, Cary Troy

The Summer Undergraduate Research Fellowship (SURF) Symposium

Motivated by a need to characterize near-bottom deep-water turbulence for an understanding of the filtration capabilities of invasive quagga mussels, an instrument tripod was deployed in Lake Michigan for six months in 60m of water to measure current velocities, with specific interest being paid to near-bottom (0.10 to 0.95 meters above bottom) velocities during the deployment. The deployment period (September 2012-April 2013) was characterized by very little stratification and a median temperature of about throughout the water column. A mean horizontal velocity of 3.6 cm/s with a standard deviation of 2 cm/s was also measured at 1 meter above the …

Microfluidic Platform For Immobilizing Cells To Surfaces, Sze Yung Li, Arvind Raman

The Summer Undergraduate Research Fellowship (SURF) Symposium

Atomic Force Microscope (AFM) is an advanced nanotechnology tool for image mapping and cell properties measuring. One of the major challenges presented to the scientists in the field is the procedure for sample preparation. In order for a cell or virus to be measured by the AFM, it has to be firmly attached to the surface. Existing methods including chemical functionalization of surface for cells binding are often very slow process which hinders the possibility of high throughput measurement. Therefore, we propose a new method that utilizes a fluid circulation system to immobilize cells of interest to designated area to …

Solvent Selection For Liquid-Liquid Extraction Of Acetic Acid From Biomass Hydrolysate, Emma A. Barber, Mahdieh Aghazadeh, Abigail Engelberth

The Summer Undergraduate Research Fellowship (SURF) Symposium

Biofuels are one of the most hopeful alternative energy sources to fossil fuels. However, the processing and production of biofuels needs improvement to be economically competitive in the current market. One drawback is the presence of naturally occurring compounds that decrease the bioethanol production rate and yield; these are called inhibitors. A resolution to this problem is to remove the inhibitors from biomass fermentation broth prior to fermentation. This project examined liquid-liquid extraction (LLE) for removal of acetic acid, a major inhibitor. Initially, a stock solution of glucose, xylose, acetic acid, and water was combined with an additional organic solvent …

A Quantitative Analysis Of A Paper-Based, Laser-Defined, Oxygen-Generating Platform For Chronic Wounds, Tiffany L. Huang, Babak Ziaie

The Summer Undergraduate Research Fellowship (SURF) Symposium

Chronic wounds affect 6.5 million patients a year while consuming US$25 billion in health care costs (Sen 2009 Wound Repair Regen.). Despite advances in wound management therapies, modern treatment for chronic wounds still requires continual professional attention and expensive equipment, posing serious practical and financial burdens for the regular patient. To provide an alternative solution, we are developing a low-cost smart bandage platform that integrates actuators and sensors to monitor and treat chronic wounds. One component of the integrated platform is an oxygen-generating module. It is a polydimethylsiloxane (PDMS) based microfluidic device fabricated on a parchment paper substrate that …

Development Of Non-Invasive In Vivo Ultrasound Imaging Techniques For Elastase-Induced Experimental Abdominal Aortic Aneurysms, Alexa A. Yrineo, Elizabeth A. Nunamaker, Hilary D. Schroeder, Amy E. Bogucki, Craig J. Goergen

The Summer Undergraduate Research Fellowship (SURF) Symposium

Abdominal aortic aneurysms (AAAs) are pathological dilations of the aorta which are associated with significant morbidity and mortality. The underlying mechanisms that cause this inflammatory disease are not fully understood and thus, are currently under investigation. In the hopes of preventing disease progression, rodent models that mimic the human condition have been developed to provide insight into the pathogenesis of AAAs. In this study, porcine pancreatic elastase (0.44 U; Sigma-Aldrich) was infused into the infrarenal aortas of male, Sprague Dawley rats to induce aneurysms. To perform the surgery, temporary ligatures were placed around proximal and distal sections of the abdominal …

Direct Quantitative Analysis Of Biomarkers Using Mass Spectrometry, Morgan N. Mcluckey, Zheng Ouyang

The Summer Undergraduate Research Fellowship (SURF) Symposium

Point-of-care (POC) diagnostics describes a step in the medical treatment process where drugs can be monitored in a patient’s body on-site and in a timely fashion. Mass spectrometry (MS) can provide a quick, efficient, and highly accurate method of analysis of patient biofluids and tissues. Developing methods to bring this diagnostic mechanism to hospitals and clinics has the potential to improve patient care through, for example, personalized medicine. Our goal was to develop a way to effectively introduce internal standard (IS), a necessary chemical for the analytical process, to low-volume biofluid samples. Additionally, the effective direct quantitation of biomarkers with …

Environmental Monitoring In Preparation For The Installation Of A Green Roof, Andrew N. Martin, Ming Qu

The Summer Undergraduate Research Fellowship (SURF) Symposium

Green roofs are becoming an increasingly popular way to improve the environmental, economic, and aesthetic performance of both new and existing buildings. Along with the green roofs themselves, it is also common to install sensors to measure various environmental parameters that are affected by or important to the operation of the roof such as precipitation, temperature, and runoff. However, for most of these systems, the sensors are installed at the same time or even after the green roof. Therefore, no before-and-after comparisons can be made for those roofs. To account for this missing data, monitoring equipment was installed on a …

Iron-Magnesium Alloy Bioabsorbable Blood Stent, Kaitlyn Jarry, L Stanciu

The Summer Undergraduate Research Fellowship (SURF) Symposium

Bioabsorbable materials are fairly new and proper alloys for implantation in the body have not yet been established. There are a few polymers that have showed promise, but they do not provide the proper mechanical support that metal does. These materials would be used to create devices such as blood stents and orthopedic screws. Investigation into the properties of different alloys can help to establish a material that can be used for implanted devices that are only needed for a limited amount of time. In order to investigate these alloys many different experiments will to be run to test the …

Python-Based Simulation Tool For Kinetic Monte Carlo, Zaiwei Zhang, R. Edwin García

The Summer Undergraduate Research Fellowship (SURF) Symposium

Simulation tools are highly needed for testing or designing nanotechnology in university research projects.The problem in the current simulation tool used in our research, which is conducted by Prof.Garcia in MSE department at Purdue, is that users cannot observe the changing numbers of diffusivities during Vacancy Diffusion simulations between different materials. Also, there is no Graphic User Interface for the simulation tools.To solve the problem, the Virtual Kinetics of Materials Laboratory program is used to create the Graphic User Interface. Also, GTK+ toolkit has been used to create a pop-up window displaying updated diffusivities during the simulation. For user purpose, …

Mechanical Design Of Real-Time Substrate Transport Control For Stable And Efficient Thin-Film-Based Roll-To-Roll (R2r) Micro-Nanomanufacturing, Guoao Sun, Liang Pan

The Summer Undergraduate Research Fellowship (SURF) Symposium

The commercialization of electronic devices requires the high efficiency and stable mirco-nanomanufacturing processes that allow frequent design upgrades. R2R Nano is a gateway to science and engineering research that aims to impact the widespread adoption of R2R technologies for low-cost, high-volume production of high technology products on flexible substrates. However, there are lots of the mechanical and chemical factors influencing the system performance when fabricating nano-scale structures. Thus, feedback control system is increasingly playing a great role in improving the R2R performance.

The aim of my work of the project is more related to design mechanical section of the whole …

Recursive Multi-Time-Step Coupling Of Multiple Subdomains, Yukun An, Payton Lindsay, Xiaowo Wang, Arun Prakash

The Summer Undergraduate Research Fellowship (SURF) Symposium

The need for efficient computation methods for modeling of large-scale structures has become critically important over the past few years. Efficient means of analysis often involve coupling in space through domain decomposition and multi scale methods in time. The multi-time-step coupling method is a coupling method in time which allows for efficient analysis of large-scale problems for structural dynamics where a large structural model is decomposed into smaller subdomains that are solved independently and then coupled back together to obtain the global solution. For coupling of more than two subdomains that are solved at different timesteps, we employ recursive methods. …

Estimation Of Two-Stage Ditch Excavation Volume Using Lidar Data Full Paper, Kirsten E. Paff, Jane Frankenberger, Naime Celik

The Summer Undergraduate Research Fellowship (SURF) Symposium

Drainage ditches are a major pathway for sediment, nutrients, and pesticides to enter stream systems, which threaten environmental and human health. Unlike trapezoidal ditches, two-stage ditches have a vegetated bench that acts as a floodplain, which helps to prevent erosion and to increase the processing of nutrients to improve water quality. Converting a trapezoidal ditch to a two-stage ditch is expensive, due to the large volumes of soil that need to be excavated. Since ditch geometries vary significantly and surveying each potential site by hand would be time consuming and expensive, a tool based upon online Light Detection and Ranging …

Electrochemical Sensing With Metal Oxides, Isabella Ramirez, Lia Stanciu, Alexandra Snyder

The Summer Undergraduate Research Fellowship (SURF) Symposium

The effective sensing of hydrogen peroxide is important for a variety of reasons. It can be utilized as a diagnostic tool for diseases like asthma; also, the sensing can be utilized in pharmaceutical and food production for quality control. The use of silver oxide nanoparticles with varying morphologies has not been investigated as a sensing agent for hydrogen peroxide in the past. The particles’ properties and ability to oxidize and reduce hydrogen peroxide suggest that they will be effective to create a sensitive sensor. The silver oxide particles were prepared through chemical reduction using varying molar ratios of reactants. The …

Characterization Of The Saturation Level Of Nucleosome Arrays And Plasmids By Mnase Digestion, Wenjie Liu, Nathan Nurse, Chongli Yuan

The Summer Undergraduate Research Fellowship (SURF) Symposium

Studying processes involving DNA such as DNA replication and transcription is best done in the context of chromatin because the structure of DNA influences the efficiency of such processes. Chromatin structure is derived from DNA wrapping around histone octamers with the histone octamer density termed saturation level. For in vitro studies on DNA replication and transcription, it is important to maintain a constant saturation level so that saturation level can be removed as a variable. Our goal is to characterize the saturation level of plasmids using the rate of MNase digestion. MNase digestions were first performed on reconstituted nucleosome arrays …

Use Of Oscillatory Shear To Study The Effect Of Limestone Filler On The Rheology Of Early-Age Portland Cement, Christopher W. Barney, Kendra Erk

The Summer Undergraduate Research Fellowship (SURF) Symposium

Cement is a material that has been in use since the ancient times and is the most widely manufactured material in industry today. During the production of cement, limestone undergoes a process called calcination which releases CO₂. In order to reduce the environmental impact and cost of cement production it has become standard practice to replace a portion of the cement mixture with ground limestone, but this causes a change in the rheological profile of the mixture. This change in rheology affects both the short and long term workability of the material. In this study, small amplitude oscillatory …

Resource-Aware Distributed Particle Filtering For Cluster-Based Object Tracking In Wireless Camera Networks, Kihyun Hong

Open Access Dissertations

The proliferation of miniaturized low-power computing devices, advances in wireless communications, and the availability of inexpensive imaging sensors have enabled the development of wireless camera networks (WCN). In this dissertation, we consider the problem of real-time object tracking with a WCN. Existing object tracking methods designed for multi-camera systems do not take into account the unique constraints of WCNs. Specifically, an effective object tracking system for WCNs must anticipate unreliable network communication, limited memory, and limited computational power in each camera node. In particular, unreliable communication degrades the quality of the visual information shared by the cameras, which ultimately degrades …

Modeling The Atomic And Electronic Structure Of Metal-Metal, Metal-Semiconductor And Semiconductor-Oxide Interfaces, Ganesh Krishna Hegde

Open Access Dissertations

The continuous downward scaling of electronic devices has renewed attention on the importance of the role of material interfaces in the functioning of key components in electronic technology in recent times. It has also brought into focus the utility of

atomistic modeling in providing insights from a materials design perspective. In this thesis, a combination of Semi Empirical Tight-Binding (TB), first-principles Density

Functional Theory and Reactive Molecular Dynamics (MD) modeling is used to study aspects of the electronic and atomic structure of three such 'canonical' material interfaces - Metal-Metal, Metal-Semiconductor and Semiconductor oxide interfaces.

An important contribution of this thesis …

Unitary Space-Time Waveform Scheduling For High-Resolution Delay-Doppler Mimo Radar Sensing, Tariq R. Qureshi

Open Access Dissertations

In this dissertation, we deal with radar systems where multiple radar waveforms are simultaneously transmitted from different antennas. The goal is to process the returns in a way that the overall ambiguity function is a sum of individual ambiguity functions, such that the sum better approximates the ideal thumbtack shape. The transmitted waveforms are based on complementary sequences, which have this property that their individual autocorrelation functions sum to a delta function. A unitary design for the illustrative 4x4 example prescribes the scheduling of the complementary sequence based waveforms over four transmit antennas over four PRIs. Further, it dictates how …

Fault Detection And Diagnosis For Air Conditioners And Heat Pumps Based On Virtual Sensors, Woohyun Kim

Open Access Dissertations

The primary goal of this research is to develop and demonstrate an integrated, on-line performance monitoring and diagnostic system with low cost sensors for air conditioning and heat pump equipment. Automated fault detection and diagnostics (FDD) has the potential for improving energy efficiency along with reducing service costs and comfort complaints. To achieve this goal, virtual sensors with low cost measurements and simple models were developed to estimate quantities that would be expensive and or difficult to measure directly.

A virtual refrigerant charge sensor (VRC) was extended with three approaches for determining refrigerant charge for equipment having variable-speed compressors and …

Scalable Autonomous Operations Of Unmanned Assets, Sunghun Jung

Open Access Dissertations

Although there have been great theoretical advances in the region of Unmanned Aerial Vehicle (UAV) autonomy, applications of those theories into real world are still hesitated due to unexpected disturbances. Most of UAVs which are currently used are mainly, strictly speaking, Remotely Piloted Vehicles (RPA) since most works related with the flight control, sensor data analysis, and decision makings are done by human operators. To increase the degree of autonomy, many researches are focused on developing Unmanned Autonomous Aerial Vehicle (UAAV) which can takeoff, fly to the interested area by avoiding unexpected obstacles, perform various missions with decision makings, come …

Spectroscopic And Kinetic Characterization Of Catalytic Materials For The Conversion Of Biomass-Derived Compounds, Paul James Dietrich

Open Access Dissertations

As economies look to transition away from petroleum for social, economic, and political reasons, biomass will continue to attract attention as a renewable feedstock for the fuels and chemicals industry. In order to turn biomass into end use fuels and chemicals, the oxygen content must be lowered significantly, requiring large hydrogen inputs. For these processes to be completely renewable, the hydrogen must come from biomass or biomass-derived compounds. In this work, catalysts for the aqueous phase reforming (APR) of biomass-derived sugars were characterized by a combination of reaction kinetics, X-ray spectroscopy, electron microscopy, and theoretical computation to determine the active …

Transition Faults And Transition Path Delay Faults: Test Generation, Path Selection, And Built-In Generation Of Functional Broadside Tests, Bo Yao

Open Access Dissertations

As the clock frequency and complexity of digital integrated circuits increase rapidly, delay testing is indispensable to guarantee the correct timing behavior of the circuits. In this dissertation, we describe methods developed for three aspects of delay testing in scan-based circuits: test generation, path selection and built-in test generation.

We first describe a deterministic broadside test generation procedure for a path delay fault model named the transition path delay fault model, which captures both large and small delay defects. Under this fault model, a path delay fault is detected only if all the individual transition faults along the path are …

Analysis And Optimization Of Cooperative Wireless Networks, Phuong Thanh Tran

Open Access Dissertations

Recently, cooperative communication between users in wireless networks has attracted a considerable amount of attention. A significant amount of research has been conducted to optimize the performance of different cooperative communication schemes, subject to some resource constraints such as power, bandwidth, and time. However, in previous research, each optimization problem has been investigated separately, and the optimal solution for one problem is usually not optimal for the other problems.

This dissertation focuses on joint optimization or cross-layer optimization in wireless cooperative networks. One important obstacle is the non-convexity of the joint optimization problem, which makes the problem difficult to solve …

Improving Multicore Resource Efficiency And Performance, Syed Ali Raza Jafri

Open Access Dissertations

With clock speeds stagnating for the last few years and multi-cores having replaced uniprocessors, software development must now turn towards shared memory parallel programming to continue enhancing performance. Shared memory parallel programming; however is significantly more challenging than its sequential counterpart. Conventional shared memory parallel programs can fall victim to deadlocks, livelocks and data races which are hard to detect and debug. Aside from programming complexity chipmultiprocessors need a scalable, low latency, high bandwidth interconnect fabric to deliver performance. Conventional interconnects such as crossbars and buses can deliver low latency but do not scale with increasing number of cores. Researchers …