Engineering Commons^™

Intersectionality Of Non-Normative Identities In The Cultures Of Engineering Survey, Allison Godwin, Adam Kirn, Lisa Benson, Geoff Potvin

School of Engineering Education Working Papers

This is a survey measuring students' attitudes and beliefs in engineering. The survey was distributed at four institutions across the U.S. in the fall semester of 2015. Students in first semester first-year engineering courses were surveyed on a paper-and-pencil instrument as part of a larger study. We collected 2,916 valid student responses that were digitized by the research group and audited for accuracy. Validity evidence for this survey has been document in ASEE conference proceedings.

Lucidpipe™ Power System, Purdue Ect Team

ECT Fact Sheets Archive

In most gravity fed water transmission pipelines, it is desired to reduce excess pressure head to prevent undue strain on a pipeline and lower the incidence of leaks. Normally this is done with pressure reducing valves that essentially burn off this excess pressure as heat. The LucidPipe™ system converts it to low cost electricity thereby removing unwanted pressure and generating energy at the same time - energy that can be put used behind the grid or put back on the grid. The LucidPipe™ system extracts a small percentage of pressure head providing nearly invisible operation allowing water operators to fulfill …

Development Of A Problem-Based Learning Matrix For Data Collection, Shannon M. Sipes

Interdisciplinary Journal of Problem-Based Learning

Few of the papers published in journals and conference proceedings on problem-based learning (PBL) are empirical studies, and most of these use self-report as the measure of PBL (Beddoes, Jesiek, & Borrego, 2010). The current study provides a theoretically derived matrix for coding and classifying PBL that was objectively applied to official curriculum documentation in a content analysis. The results for the level of problem-based learning in two engineering program curricula are presented. By introducing such a matrix, this study offers a tool that can be applied by other scholars examining PBL, creating consistency in methodology, definitions, and language among …

Pilot Source Study 2015: An Analysis Of Far Part 121 Pilots Hired After Public Law 111-216—Their Backgrounds And Subsequent Successes In Us Regional Airline Training And Operating Experience, Guy Smith, Elizabeth Bjerke, Maryjo Smith, Cody Christensen, Thomas Carney, Paul Craig, Mary Niemczyk

Journal of Aviation Technology and Engineering

This report is the second in a series entitled Pilot Source Study 2015. Public Law 111-216 (Airline Safety and Federal Aviation Administration Extension Act of 2010) and the subsequent FAA regulation changed pilot hiring for US air carriers operating under 14 CFR Part 121. The Pilot Source Study 2015 was designed to determine the effect of Public Law 111-216 on US regional airlines after its effective date, August 1, 2013. The study collected records for 6,734 FAR Part 121 regional airline pilots to determine the effect of pilots’ backgrounds on their performance in regional airline training and operations. A previous …

‘‘Can I Drop It This Time?’’ Gender And Collaborative Group Dynamics In An Engineering Design-Based Afterschool Program, Jessica Schnittka, Christine Schnittka

Journal of Pre-College Engineering Education Research (J-PEER)

The 21st century has brought an increasing demand for expertise in science, technology, engineering, and math (STEM). Although strides have been made towards increasing gender diversity in several of these disciplines, engineering remains primarily male dominated. In response, the U.S. educational system has attempted to make engineering curriculum more engaging, informative, and welcoming to girls. Specifically, project-based and design-based learning pedagogies promise to make engineering interesting and accessible for girls while enculturating them into the world of engineering and scientific inquiry. Outcomes for girls learning in these contexts have been mixed. The purpose of this study was to explore how …

Interplanetary Mission Design With Applications To Guidance And Optimal Control Of Aero-Assisted Trajectories, Peter J. Edelman

Open Access Dissertations

A method for finding optimal aerogravity-assist tours of the solar system is developed using indirect methods. Two cost functionals are used in the optimization; finding the minimum required maximum lift-to-drag ratio, with and without a convective heating-rate path constraint, and the path which provides the minimum total stagnation point convective heat load. It is found that using present or near-future thermal protection system materials will suffice for certain aerogravity assist trajectories at Mars. Minimum heat load optimal trajectories are found for aerocapture maneuvers at Uranus and Neptune. With a large radius, and short rotational periods, atmospheric rotation must be taken …

Statistical Modeling And Simulation Of Variability And Reliability Of Cmos Technology, Khaled Hassan Md

Open Access Dissertations

The introduction of High-κ Metal Gate transistors led to higher integration density, low leakage current, and faster switching speed. However, this transition in technology roadmap brought about new failure mechanisms such as Positive Bias Temperature Instability and Stress Induced Leakage Current. In addition, the relentless downscaling of devices to keep up with Moore's law has significantly increased the time-zero variability caused by Random Dopant Fluctuation, Mean Gate Length Deviation, and Line Edge Roughness. Because of their possible correlation with time dependent aging effects, the quantification of reliability has become more complex than ever. To that effect, we propose a framework …

Early Bearing Fault Analysis Using High Frequency Enveloping Techniques, Ilya Shulkin

Open Access Theses

High frequency acceleration enveloping is one of many tools that vibration analysts have at their disposal for the diagnosis of bearing faults in rotating machinery. This technique is believed to facilitate very early detection of potential failures by detecting low amplitude repetitive impacts in frequency ranges above conventional condition monitoring. One traditional enveloping method uses a mathematical operation known as the Hilbert transform along with other signal processing procedures such as band-pass filtering and full-wave rectification. For comparison, another method uses a proprietary algorithm included in National Instruments’ LabVIEWTM add-on package: Sound and Measurement Suite. Enveloping’s inherent problem with noise …

Students' Explanations In Complex Learning Of Disciplinary Programming, Camilo Vieira

Open Access Dissertations

Computational Science and Engineering (CSE) has been denominated as the third pillar of science and as a set of important skills to solve the problems of a global society. Along with the theoretical and the experimental approaches, computation offers a third alternative to solve complex problems that require processing large amounts of data, or representing complex phenomena that are not easy to experiment with. Despite the relevance of CSE, current professionals and scientists are not well prepared to take advantage of this set of tools and methods. Computation is usually taught in an isolated way from engineering disciplines, and therefore, …

Passive Thermal Management Using Phase Change Materials, Yash Yogesh Ganatra

Open Access Theses

The trend of enhanced functionality and reducing thickness of mobile devices has led to a rapid increase in power density and a potential thermal bottleneck since thermal limits of components remain unchanged. Active cooling mechanisms are not feasible due to size, weight and cost constraints. This work explores the feasibility of a passive cooling system based on Phase Change Materials (PCMs) for thermal management of mobile devices. PCMs stabilize temperatures due to the latent heat of phase change thus increasing the operating time of the device before threshold temperatures are exceeded. The primary contribution of this work is the identification …

A Sharp Interface Isogeometric Strategy For Moving Boundary Problems, Tao Song

Open Access Dissertations

The proposed methodology is first utilized to model stationary and propagating cracks. The crack face is enriched with the Heaviside function which captures the displacement discontinuity. Meanwhile, the crack tips are enriched with asymptotic displacement functions to reproduce the tip singularity. The enriching degrees of freedom associated with the crack tips are chosen as stress intensity factors (SIFs) such that these quantities can be directly extracted from the solution without a-posteriori integral calculation.

As a second application, the Stefan problem is modeled with a hybrid function/derivative enriched interface. Since the interface geometry is explicitly defined, normals and curvatures can be …

Wave Propagation And Imaging In Structured Optical Media, Zun Huang

Open Access Dissertations

Structured optical media, usually characterized by periodic patterns of inhomogeneities in bulk materials, provide a new approach to ultimate control of wave propagation with possible practical applications: from distributed feedback lasers by diffraction gratings, to highly nonlinear performance for super-continuum generation, to fiber-optic telecommunications by microstructured photonic crystal fibers, to invisibility cloaking, to super-resolution imaging with metamaterials etc.

In particular, structured optical media allow to manipulate the wave propagation and dispersion. In this thesis, we focus on engineering the propagation phase dispersion by modulating the compositions and dimensions of the periodic elements. By tailoring the dispersion in momentum space, we …

Secondary Instabilities Of Hypersonic Stationary Crossflow Waves, Joshua Benjamin Edelman

Open Access Theses

A sharp, circular 7° half-angle cone was tested in the Boeing/AFOSR Mach-6 Quiet Tunnel at 6° angle of attack. Using a variety of roughness configurations, measurements were made using temperature-sensitive paint (TSP) and fast pressure sensors. High-frequency secondary instabilities of the stationary crossflow waves were detected near the aft end of the cone, from 110° to 163° from the windward ray.

At least two frequency bands of the secondary instabilities were measured. The secondary instabilities have high coherence between upstream and downstream sensor pairs. In addition, the amplitudes of the instabilities increase with the addition of roughness elements near the …

A High-Performance Communication Topology For Decentralized Protocols, Raza A. Khan

Open Access Theses

Preserving transaction atomicity and ensuring its commitment is key to the maintenance of data integrity in a distributed database. The distributed consensus protocol is a prominent example of a mechanism used to accomplish safe commitment of a distributed transaction. These protocols are based primarily on repeated message exchange among all sites/nodes and their performance is characterized not only by the number of these messages but also by the underlying communication topology. This thesis proposes a measure of performance known as average message complexity and proposes a communication structure based on folded even graphs called the Folded Even Network (FEN). Performance …

Implementing A Wireless Monitoring Solution For A Biomechanical Telemetry System, Hyung Suk Kim

Open Access Theses

Sport-related Traumatic Brain Injury (TBI) is one of the major concerns for collision based sports athletes and their families. The ability to measure impacts on the head is imperative to monitor brain injury and prevent serious TBI. Recent research by the Purdue Neurotrauma Group (PNG) indicates that accumulation of subconcussive impacts may cause permanent neurological damage. Currently available commercial impact monitoring systems are designed as an event-based models which collect impact data above pre-determined acceleration thresholds. To track long-term effects of sub-concussive impacts, event-based modeling is inadequate. The PNG developed a biomechanical sports telemetry system that is capable of storing …

Impact Of Rfid Information-Sharing Coordination Over A Supply Chain With Reverse Logistics, Juan Jose Nativi Nicolau

Open Access Dissertations

Companies have adopted environmental practices such as reverse logistics over the past few decades. However, studies show that aligning partners inside the green supply chain can be a substantial problem. This lack of coordination can increase overall supply chain cost. Information technology such as Radio Frequency Identification (RFID) has the potential to enable decentralized supply chain coordinate their information. Even though there are research that address RFID on traditional supply chain, few researches address how to coordinate RFID information sharing in a green supply chain. We study, through simulation experiments, two types of RFID information-sharing coordination under different configurations related …

Integration Of Bim And Utility Sensor Data For Facilities Management, Kamal Suprabhas

Open Access Theses

Building information modelling represents a building as a database of coordinated, consistent and computable information in construction (Sabol, 2008). There has been a recent trend to study the usage of BIM for post-construction facility management. Recently, attempts are also being made to link a BIM model with smart sensing technology or building automation systems (BAC). This thesis aims to investigate the feasibility of using sensor data from mote based light sensors tied to a BIM model, to be used for maintenance based facility management. More specifically, a prototype will be developed that integrates lighting sensor data collected using a mote …

Trajectory Optimization Using Indirect Methods And Parametric Scramjet Cycle Analysis, Joseph Williams

Open Access Theses

This study investigates the solution of time sensitive regional strike trajectories for hypersonic missiles. This minimum time trajectory is suspected to be best performed by scramjet powered hypersonic missiles which creates strong coupled interaction between the flight dynamics and the performance of the engine. Comprehensive engine models are necessary to gain better insight into scramjet propulsion. Separately, robust and comprehensive trajectory analysis provides references for vehicles to fly along. However, additional observation and understanding is obtained by integrating the propulsion model inside the trajectory framework. Going beyond curve fitted thrusting models, an integrated scramjet cycle analysis offers rapid trade studies …

Optical Sub-Diffraction Limited Focusing For Confined Heating And Lithography, Luis M. Traverso

Open Access Dissertations

Electronics and nanotechnology is constantly demanding a decrease in size of fabricated nanoscale features. This decrease in size has become much more difficult recently due to the limited resolution of optical systems that are fundamental to many nanofabrication methods. A lot of effort has been made to fabricate devices smaller than the diffraction limit of light. Creating devices that are capable of confining fields by means of interference patterns of propagating wave modes and surface plasmon, has proven successful to confine light into smaller spot sizes.

Zone plate diffraction lenses generate spots with dimensions very close to the diffraction limit. …

Numerical Investigation Of Crossflow Instability On The Hifire-5, Matthew T. Lakebrink

Open Access Dissertations

Stability analysis was performed with the Langley Stability and Transition Analysis Code (LASTRAC) on a 38.1% scale model of the HIFiRE-5 elliptic-cone forebody to study crossflow-induced transition in hypersonic boundary layers. A resolution study consisting of three grids (30e6, 45e6, and 91e6 points) indicated that the fine grid was sufficiently resolved. Results were largely insensitive to grid resolution over the acreage and near the attachment line. The percent variation in second-mode properties along the semi-minor axis was less than 1% between the medium and fine grids. The variation in crossflow-wave properties was less than 0.04% between the medium and fine …

Assessing Fuel Burn Inefficiencies In Oceanic Airspace, Stephen Builta

Open Access Theses

Increasing the efficiency of aircraft operations offers a shorter term solution to decreasing aircraft fuel burn than fleet replacement. By estimating the current airspace inefficiency, we can get an idea of the upper limit of savings. Oceanic airspace presents a unique opportunity for savings due to increased separation differences vs. overland flight.

We assess fuel burn inefficiency by comparing estimated fuel burn for real world flights with the estimated optimal fuel burn. For computing fuel burn, we use the Base of Aircraft Data (BADA) with corrections based on research by Yoder (2005). Our fuel burn results show general agreement with …

Multimedia Techniques For Construction Education And Training, Wayne A. Bunnell

Open Access Theses

The current profession of civil engineering often focuses education and training on code compliance rather than constructability and construction techniques. Also, it is well accepted that it takes a decade or more for engineers to develop a high-level project construction understanding and many state departments of transportation rely on in-field training for entry-level inspectors, with little or no education provisions for contractors. This research investigated the use of time-lapse photography to develop training and education material that will improve the understanding of project construction and crucial quality control specifications of an entry-level engineer, contractor, or inspector. Overall, the project team …

Size Scaling Of Strength And Toughness For 3d Printed Polymer Specimens, Darren Thomas Bell

Open Access Theses

To find material systems that offer low density and high strength, stiffness or toughness, hierarchically designed material systems have provided a promising research area. This thesis lays the groundwork for designing efficient micro-architectured material systems by characterizing size effects for 3d printed polymer parts. Two methods were used to analyze data from 3-point bend tests for specimens of varying size: the load-separation method was used for finding the point of crack growth initiation and Bazant’s method was used to find shape independent strength at failure. The strength values were used as inputs for finding size independent material constants within a …

Mechanism Of Shot Peening Enhancement For The Fatigue Performance Of Aa7050-T7451, Daniel James Chadwick

Open Access Theses

Shot peening is a dynamic cold working process involving the impingement of peening media onto a substrate surface. Shot peening is commonly employed as a surface treatment technique within the aerospace industry during manufacturing, in order to improve fatigue performance of structural components. The compressive residual stress induced during shot peening is understood to result in fatigue crack growth retardation, improving the performance of shot peened components. However, shot peening is a compromise between the benefit of inducing a compressive residual stress and causing detrimental surface damage. Due to the relatively soft nature of AA7050-T7451, shot peening can result in …

Printing 3d Lithium-Ion Microbattery Using Stereolithography, Qiming Chen

Open Access Theses

Microbatteries have been gained a lot of importance since the development of micro- and nanotechnologies. Integrating the microbattery system will enable a variety of applications, such as implantable biomedical devices and wireless sensor networks. In this paper, we demonstrated a new method to fabricate three dimensional lithium-ion microbattery using stereolithiography. A UV-curable gel polymer electrolyte resin is first synthesized and characterized. The electrolyte resin is then applied to build into 3D architecture by stereolithography. The gel electrolyte structure is designed into a zigzag shape in order to improve the contact area between electrode and electrolyte. Battery's active material, LiFePO4 (LFP) …

Tangible Interaction As An Aid For Object Navigation In 3d Modeling, Sanmathi Dangeti

Open Access Theses

This study introduced an interaction technique that used tangible interaction for 3D modeling. A hybrid interaction technique using a Kinect camera and a smartphone with a gyroscope was developed for the navigating objects in a 3D modeling software. It was then tested on 20 participants categorized as amateurs who had basic 3D/ CAD modeling experience and 20 participants categorized as the experts who had extensive experience working with the modeling software. This research study presents the need for existence of such interaction technique, gaps from the related previous studies, statistical findings from the current study and possible reasons for the …

Taming Tail Latency For Erasure-Coded, Distributed Storage Systems, Jingxian Fan

Open Access Theses

Nowadays, in distributed storage systems, long tails of responsible time are of particular concern. Modern large companies like Bing, Facebook and Amazon Web Service show that 99.9th percentile response times being orders of magnitude worse than the mean. With the advantages of maintaining high data reliability and ensur- ing enough space eciency, erasure code has become a popular storage method in distributed storage systems. However, due to the lack of mathematical models for analyzing erasure-coded based distributed storage systems, taming tail latency is still an open problem.

In this research, we quantify tail latency in such systems by deriving a …

An Investigation Of Composite Failure Analyses And Damage Evolution In Finite Element Models, Ann M. Frappier

Open Access Theses

This paper presents a composite conical structure used commonly in flight-qualification testing. This structure’s overall load-displacement behavioral response is characterized. Mixed-mode multidelamination in a layered composite specimen is considered in Abaqus/Explicit through both the Virtual Crack Closure Technique and Cohesive Elements. The Virtual Crack Closure Technique and Cohesive Elements are compared against experimental test results presented in literature. Further, a thorough comparison in which the effects of failure criteria type, through-thickness mesh density, and finite element type on the progressive failure response of this composite assembly is discussed. Lastly, Abaqus/Standard and Helius PFA are compared in order to gain confidence …

Uncertainty Quantification On Industrial High Pressure Die Casting Process, Jiahong Fu

Open Access Theses

High pressure die casting (HPDC) is a famous manufacturing technology in industry. This manufacturing process is simulated by commercial code to shed the light on the quality of casting product. The casting product quality might be affected by the uncertainty in the simulation parameter settings. Thus, the uncertainty quantification on HPDC process is significant to improve the casting quality and the manufacturing efficiency.

In this work, three uncertainty quantifications and sensitivity analyses on the A380 aluminum alloy HPDC process of intermediate speed plate are performed. The material thermophysical properties, boundary conditions of the model, and operational as well as artificial …

Thermal Transport In Lithium Ion Batteries: An Experimental Investigation Of Interfaces And Granular Materials, Aalok Jaisheela Uday Gaitonde

Open Access Theses

Increasing usage and recent accidents due to lithium-ion (Li-ion) batteries exploding or catching on fire has inspired research on the characterization and thermal management of these batteries. In cylindrical 18650 cells, heat generated during the battery's charge/discharge cycle is poorly dissipated to the surrounding through its metallic case due to the poor thermal conductivity of the jelly roll, which is spirally wound with many interfaces between electrodes and the polymeric separator. This work presents a technique to measure the thermal conduction across the metallic case-plastic separator interface, which ultimately limits heat transfer out of the jelly roll.

The polymeric separator …