Engineering Commons^™

Oxidation Kinetics Of Metallic Powders, Hongqi Nie

Dissertations

Aluminum and magnesium are widely used in pyrotechnic formulations and other energetic materials; they are also common components of reactive alloys, e.g., Al-Mg and B-Mg, and others, which are potential fuels for explosives and propellants. Reaction mechanisms and oxidation kinetics of aluminum, magnesium and Al-Mg alloy powders in different oxidizing environments are investigated using thermo-analytical measurements. New methods of data processing are developed, relying on measured particle size distributions of the reactive spherical powders. It became possible to identify the reaction interface location for many heterogeneous metal oxidation processes; for several reactions, detailed kinetic descriptions are obtained.

For aluminum powders, …

Experimental And Modeling Studies In Membrane Distillation, Lin Li

Dissertations

A variety of microporous hydrophobic flat sheet membranes of polyvinylidene fluoride (PVDF) and expanded-polytetrafluoroethylene (e-PTFE) are studied to evaluate the influence of membrane properties on their performance in desalination by direct contact membrane distillation (DCMD) and vacuum membrane distillation (VMD) processes. The membrane thickness is varied between 23 μm to 125 μm; the pore size is varied from 0.05 μm to 0.45 μm. The porosity is generally high in the range of 0.7 - 0.8. DCMD experiments are performed over a hot brine temperature range of 65 °C to 85 °C and distillate temperature at 25 °C for various brine …

A Novel Approach To User Controlled Ambulation Of Lower Extremity Exoskeletons Using Admittance Control Paradigm, Kiran Kartika Karunakaran

Dissertations

The robotic lower extremity exoskeletons address the ambulatory problems confronting individuals with paraplegia. Paraplegia due to spinal cord injury (SCI) can cause motor deficit to the lower extremities leading to inability to walk. Though wheelchairs provide mobility to the user, they do not provide support to all activities of everyday living to individuals with paraplegia.

Current research is addressing the issue of ambulation through the use of wearable exoskeletons that are pre-programmed. There are currently four exoskeletons in the U.S. market: Ekso, Rewalk, REX and Indego. All of the currently available exoskeletons have 2 active Degrees of Freedom (DOF) except …

Custom Engineered Nanomaterials For Energetics And Energy Applications, Ani Abraham

Dissertations

Recent interest in reactive material has shifted to more custom formulations targeting specific applications. In this work, preparation and characterization of nanomaterials used for several energetics and energy applications are addressed.

The main challenge of this effort is to design and prepare nanomaterials which have significant improvements associated with combustion dynamics, reaction rates, sensitivity, biocidal effectiveness, moisture stability, and are environmentally safer over the existing energetics. Nanomaterials that are used to defeat stockpiles of chemical and biological weapons, modify ionosphere properties for transmission of optical and radio signals, and for energy storage are prepared under room or cryogenic temperatures via …

Effect Of Melt Method On Thoracolumbar Connective Tissue, Faria Sanjana

Theses

Approximately, 31 million adults in the United States suffer from low back pain (LBP). Altered connective tissue structure has been identified in adults with chronic LBP. Numerous novel treatments are being developed targeting the connective tissue and nervous system to relieve people from LBP. One such self-care treatment is the MELT method. The objective of this study was to determine whether thickness of thoracolumbar connective tissue and other biomechanical and viscoelastic properties of myofascial tissue in the low back region change in subjects with chronic LBP as a result of MELT.

Using ultrasound imaging and an algorithm developed in MATLAB, …

Effect Of Temperature On The Fracture Behavior Of Lead-Free Solder Joints, Patrick Thompson

Theses

The objective of the present study is to examine the effect of temperature on the fracture behavior of Cu-SAC305-Cu joints. To this end, double cantilever beam (DCB) specimens, consisting of a thin layer of Sn96.5Ag3.0Cu0.5 (SAC305) solder sandwiched between two copper bars, fabricated under standard surface mount (SMT) processing conditions are fractured under various temperatures with a MTS machine equipped with an environment chamber. The load-displacement behavior corresponding to crack initiation and the subsequent toughening before ultimate failure and the displacements near crack tip are recorded and used to calculate the fracture energy release rates. The fracture surfaces and the …

Preparation, Ignition And Combustion Of Reactive Metal-Sulfur Nanocomposites, Ziyue Zhong

Theses

Mechanical milling is applied to synthesize reactive metal-sulfur nanocomposites. Specifically, magnesium-sulfur, aluminum-sulfur and zirconium-sulfur nanocomposite powders are prepared. Each powder particle contained homogeneously mixed sulfur and respective metal. These materials are expected to be stable in room air. They are also expected to release sulfur upon ignition; the released sulfur may serve as a biocidal agent. The ignition temperatures of the three prepared sulfur-bearing materials fall in a range of 750 - 1000 K. All prepared materials are successfully ignited in electrostatic discharge experiment as well as in a constant volume explosion experiment. The most sensitive material to spark ignition …

Continuum Mechanical Analysis Of Space And Time Dependent Deformation Pattern Of Brain With Blunt Injury, Chen Miao

Theses

Deformation of human brain due to acceleration impact has been widely accepted as the direct connection to the Trauma Brain Injury (TBI). However, the limitation of obtaining deformation data of TBI is a major obstacle to understanding TBI mechanism. This experiment mainly focuses on developing a method to measure deformation pattern of brain with blunt injury. First of all, displacement data of markers on sagittal plane of an injury head model was collected using 3D reconstruction software after an impact test. Second, the displacement data was used to calculate 2D Lagrangian strain tensor and the principal strain. The temporal and …

Optimum Distance Between Ground Base Stations For High-Speed Train Communications Using Free-Space Optical Laser Links, Sina Fathi Kazerooni

Theses

High-Speed trains (HSTs) can travel at speeds up to 430 Km/h. The increasing adoption rate of HSTs, and large number of Internet-connected digital devices, pose a great demand for a fast and reliable Internet connection in high-speed trains. Different radio-frequency (RF) wireless communication systems have been studied for HSTs. However, RF wireless communications in high-speed mobility environments suffer from frequent handovers, penetration loss, and Doppler effect. These problems promote the use of other technologies such as free-space optical (FSO) communications to provide reliable Internet connection for HST’s passengers.

Two different approaches for performing signal handover using FSO technology for ground …

An Electromechanical System For Characterization Of Piezoelectric Materials, Ahmet Sait Asan

Theses

Piezoelectric materials have been used in medical applications for a long time due to their unique characteristics, which is to respond to mechanical stimulation by producing an electrical current and vice versa. They perform a pivotal role in medical applications both for diagnostic and therapeutic purposes. In this regard, characterizing the piezoelectric properties of these materials is crucial for their usage. In this particular study, an electromechanical system for measurement of piezoelectric output signals is designed and tested. The project is motivated by the question: can the piezoelectric properties be characterized by applying different mechanical stimulation waveforms and frequencies. Two …

Infrared Imaging - Case Studies And Applications, Shuang Du

Theses

Recent advancements in the manufacture of solid state detectors have led to significant improvements in the use and applications of infrared (IR) imaging. Compared with traditional imaging in visible light, infrared imaging has abilities to convey significant additional information. Applications in medicine require wavelengths in the range of 0.8 to 25 microns while metrology and astronomy, traditionally, require wavelengths in the range of 25 microns to 1 mm.

In this study, infrared imaging has been used as a tool to characterize a variety of objects and systems. Some of these case studies have been considered under conditions of thermodynamic non-equilibrium. …

Diffusivity Of Drug Actives In Transdermal Drug Delivery (Tdd), Natali R. Gendelberg

Theses

Transdermal Drug Delivery (TDD) through skin patches has many advantages including the following: slow and continuous administration of the therapeutic over long periods of time, timely dosage, accessibility, kinetic maneuverability, elimination of the “First Pass Effect” and negative side effects on the digestive tract. All of the above justify investment into further development of TDD therapies, despite the skin permeability restrictions posed on size and charge by the skin. As skin permeability varies between all individuals based on age, ethnicity and lifestyle, the determination of the proper drug dosages to be contained in the skin patch is highly reliant on …

Antibacterial Efficacy Of Nanometals In Conjunction With Electrical Stimulus, Syed A. Hussain

Theses

Hospital related infections generally result from the combined effect of preexisting bacteria on the patient and invasive devices. This demonstrates the significance in improving these medical devices to increase the quality of life of the patients that require them. This study will attempt to evaluate the antibacterial efficacy of nanocopper particles and an electrical stimulus for the usage in medical device development and the hospital environment.

For devices such as catheters, infections typically result from bacteria entering the body from the outside. This is accomplished by bacteria attaching themselves to the exterior of the device and producing biofilm which allows …

Response Of Stretch-Injured Schwann Cells, Stephanie Iring

Theses

Axon fibers are covered by myelin sheath. After axonal damage, demyelination follows with the production of debris. In the Central Nervous System many studies have been performed to observe and analyze stretch injured axons, but very little has been done to study the white matter axonal tracts, oligodendrocytes. Schwann cells can help take a first look into stretch injured glia cells from the Peripheral nervous system. In order to observe changes in Schwann Cells a stretch injury device is used to produce the effects of severe and moderate injuries. Schwann Cells are stretch injured in both their undifferentiated and differentiated …

Dissolution Kinetics Of Model Api In Molten Polymer Excipients During Batch Processing, Shen Ji

Theses

In the pharmaceutical industrial application field, hot-melt extrusion (HME) has been recently introduced to develop new solid dosage forms and products. By dissolving the poorly–soluble active pharmaceutical ingredients (API) into water-soluble polymers, the bioavailability of the Class II (with low solubility and high permeability in water) API in Biopharmaceutical Classification System (BCS) could be significantly improved in the body. For readily water-soluble API, HME provides a new approach to produce a controlled release drug system. Hence, pharmaceutical HME is a promising processing method in the pharmaceutical industry.

However, HME has not been widely applied into the pharmaceutical industry. The thermal …

Simulation Of A Low Voltage Customer Microgrid Using Petri Nets, Joshua Mark

Theses

With renewable energy coming to the forefront of how power is generated and delivered to the modern consumer, Microgrids are emerging as an optimal and efficient method for implementing renewables and changing the infrastructure of the dated transmission and distribution grid. This thesis work presents mathematical models of Petri Nets for the simulation of a low voltage customer Microgrid. Using previous work created in this specific field, a Hybrid Petri Net is modified such that it consists of multiple distributed generators, storage, and the utility which is referred to as the main distribution grid in this thesis. A Discrete Petri …

Effectiveness Of Water Quality Benefits Provided By Stormwater Management Facilities/Infiltration Basin, Vinicius Rodrigues De Mattos Barreto

Theses

Stormwater Best Management Practices (BMP) and devices are systems frequently built under assumed design performances, but rarely verified after construction. Their effectiveness in protecting the environment against pollutants carried by stormwater runoff has been extensively questioned and investigated. This research presents a case study of an infiltration basin in Medford, NJ to verify if the 80% expected Total Suspended Solids (TSS) removal as stated in the New Jersey Stormwater BMP Manual is actually achieved. A sampling pit was installed on the site and infiltrated water samples were collected during three rain events and TSS measurements were compared with the inflow. …

Koh Etching Of Silicon, Ying Wang

Theses

In this research, a series of comparative etching experiments on silicon wafers have been carried out using potassium hydroxide (KOH) for different experimental etching conditions for concentration, temperature and time on (100) orientation p-type silicon wafers. Besides the basic etching conditions, the position of the immersed wafer also has unpredictable effect on the etching process. This may be attributed to the relative contact position between the surface of the immersed wafer and the flow patterns of the stirred etching solution.

The surface morphology analysis indicates that the specific position of the wafer, with respect to the flow of the etchant, …

Development And Analysis Of Aluminum-Ptfe Reactive Composite Material, Siva Kumar Valluri

Theses

The shortcomings of micron sized aluminum due to the oxide barrier and two phase loses pose a hindrance for its efficient use as a fuel. In this study a fluoropolymer; Teflon’s inclusion in micron sized -325 mesh aluminum is suggested as a replacement to aluminum. Aluminum Teflon based energetic material see great potential for use in pyrotechnics, propellants and even explosives. A composite with composition Al-PTFE (90-10 wt. %) is prepared through Cryomilling and is shown to be a better method of preparation as compared to room temperature milling. The prepared materials are studied to identify best conditions. The analysis …

A Computational Model For Transdermal Diffusion Of Lidocaine And Tetracaine Topical Patches, Qian Dong

Theses

In recent years, transdermal drug delivery patches (TDDP) have developed rapidly. This is because the TDD system has more advantages than traditional drug delivery systems such as oral medicine and intravenous injection. In order to reach the circulatory system of the human body, drug molecules have to pass through the epidermis (outer layer) of the skin. The barrier properties of epidermis originate from low permeability of stratum corneum (SC) which is the outermost layer of the human skin. The objective of this thesis is to build a Finite Element (FE) model, utilizing commercial FE software (ANSYS), that can be implemented …

Magnetic Augmented Rotation System (Mars ) - Properties And Performance, Ruolei Liu

Theses

Magnetic Augmented Rotation System (MARS) is proposed as a system for conversion of mechanical energy into electrical energy. It works on the principle of magnetic coupling. Because it is contactless, compared with traditional gears, it increases the transfer efficiency from a driver to a rotor; reduces noise, requires no lubrication and has low maintenance cost. In order to assess the performance of MARS, a charging system based on MARS is implemented. This system includes rechargeable batteries in the range of 6 volts to 12 volts, a load in the form of a light bulb, a voltage transformer, and digital multimeter …

Hand Control Of Bipedal Balance In Quiet Standing: Implementations For Lower Extremity Exoskeleton, Ala’A Al-Rashdan

Dissertations

Maintaining stable posture is important for humans, even though it is challenging because of our bipedal structure. One of the main balance related disorders is paraplegia due to spinal cord injury. People with a complete spinal cord injury have motor and sensory impairment that greatly reduces the ability to move their lower extremities. In recent years, lower extremity exoskeletons that apply torques generated by motors to the joints of the person have helped to them stand and walk.

This research is a part of an extended project to build a new exoskeleton for use by individuals with paraplegia due to …

Laboratory Studies Of The Biodegradation Of Chemically Dispersed Oil: Effect Of Droplet Size And Nutrient Amendment, Christopher D'Ambrose

Dissertations

Oil spills could have devastating effects on the shorelines, and for this reason, chemical dispersants are commonly used to disperse the oil slick in the water column, preventing it from reaching the shorelines. However, the long term fate of dispersed oil depends on its biodegradation by indigenous microorganisms, which in turn depends on the concentration of nutrients in water and on the droplet size distribution.

Using water from the shorelines of Atlantic City, we placed the water with oil and dispersant inside EPA Baffled Flasks and placed them on rotatory shakers. We selected two speeds: high (250 rpm) and low …

Verification Of Emotion Recognition From Facial Expression, Yanjia Sun

Dissertations

Analysis of facial expressions is an active topic of research with many potential applications, since the human face plays a significant role in conveying a person’s mental state. Due to the practical values it brings, scientists and researchers from different fields such as psychology, finance, marketing, and engineering have developed significant interest in this area. Hence, there are more of a need than ever for the intelligent tool to be employed in the emotional Human-Computer Interface (HCI) by analyzing facial expressions as a better alternative to the traditional devices such as the keyboard and mouse.

The face is a window …

Understanding Bulk Behavior Of Particulate Materials From Particle Scale Simulations, Xiaoliang Deng

Dissertations

Particulate materials play an increasingly significant role in various industries, such as pharmaceutical manufacturing, food, mining, and civil engineering. The objective of this research is to better understand bulk behaviors of particulate materials from particle scale simulations.

Packing properties of assembly of particles are investigated first, focusing on the effects of particle size, surface energy, and aspect ratio on the coordination number, porosity, and packing structures. The simulation results show that particle sizes, surface energy, and aspect ratio all influence the porosity of packing to various degrees. The heterogeneous force networks within particle assembly under external compressive loading are investigated …

Generalized Dft: Extensions In Communications, Yuewen Wang

Dissertations

Discrete Fourier Transform (DFT) is a restricted version of Generalized DFT (GDFT) which offers a very limited number of sets to be used in a multicarrier communication system. In contrast, as an extension on Discrete Fourier Transform (DFT) from the linear phase to non-linear phase, the proposed GDFT provides many possible carrier sets of various lengths with comparable or better performance than DFT. The availability of the rich library of orthogonal constant amplitude transforms with good performance allows people to design adaptive systems where user code allocations are made dynamically to exploit the current channel conditions in order to deliver …

Normal-Strength And High-Strength Concrete Columns Under Cyclic Axial Load And Biaxial Moment, Mehdi Zarei

Dissertations

The technique of using Carbon Fiber Reinforced Polymer (CFRP) materials to repair and strengthen various concrete members has become popular in the structural retrofitting field as an effective way to enhance the strength and ductility of concrete members due to its superior mechanical properties. In this study a method was introduced to study the behavior of concrete columns with and without CFRP jackets under constant axial load and variable lateral load. The lateral load was applied monotonically and cyclically. To predict the behavior of concrete columns under monotonic and cyclic compressive loadings, a computer code was developed to produce the …

Experimental And Theoretical Evaluation Of In-Depth Damage Distribution In Sawn Silicon Wafers, Srinivasamurthy Devayajanam

Dissertations

As-sawn silicon wafers have surface damage that needs to be removed before any further processing into solar cells. This damage distribution can vary with cutting parameters such as wire size, slurry particle/diamond grit size, and wire usage. To date, there is no simple way to measure the degree of damage, damage depth, and damage distribution. But, this information is needed by the wafer manufacturers as well as solar cell manufacturers.

A technique based on sequential etching of silicon wafers and minority carrier lifetime (τ_eff) measurements is used to determine damage depth. In this technique, samples are sequentially etched …

Plasticity Of The Cortical Representation Of Finger Extensors Induced By Paired Associative Stimulation, Ian Anthony Gerard Lafond

Dissertations

This dissertation first explored associative plasticity of the human motor cortical representation with the use of noninvasive transcranial magnetic stimulation (TMS) paired with peripheral electrical stimulation. Paired Associative Stimulation (PAS) has grown in popularity because of its potential clinical applications. PAS techniques are used in combination with electromyography (EMG) measurements to study cortical excitability and features of hand movement. This work focuses on a cohesive approach to answer central questions about: the ideal mechanism to facilitate cortical plasticity via PAS, the interaction between the behavior performed and type of stimulation delivered to the targeted cortical network and the effects of …

An Fpga Implementation Of A Sleep Enabled Pon System, Zheyu Liu

Theses

Owing to the growing demand for bandwidth-hungry video-on-demand applications, Passive Optical Network (PON) has been widely considered as one of the most promising solutions for broadband access. Environmental concerns motivated network designers to lower energy consumption of optical access networks. A well-known approach to reduce energy consumption is to allow network elements to switch to the sleep mode.

In this framework, an improved Optical network Unit (ONU) architecture in TDM-PON is proposed to reduce the handover time of status switching. Energy-saving performances of current and improved architectures are compared in different scenarios. The simulation results show that by applying a …