Engineering Commons^™

Fluid Flow And Gas Absorption In An Ejector Venturi Scrubber, Iclal Atay

Dissertations

Empirical models were developed to describe the fluid flow characteristics and gas absorption efficiency of an ejector venturi scrubber. The empirical constants were determined experimentally using stop action photographs of the spray, static pressure measurements, and sulfur dioxide absorption efficiencies.

To take photographs of the spray, a 2 foot high, clear plastic ejector venturi scrubber was used, with a 4 inch diameter gas entrance port. Photographic equipment included a Hasselblad camera, Xenon flash lamp, and Polaroid 667 ASA 3000 film. Exposure duration was about 1 microsecond, resulting in complete stop-action of the spray droplets at liquid rates up to 6 …

Systems Building Theory Application Within The Residential Housing Construction Market, Gary Alexander Newhard

Theses

The primary purpose of this report is to introduce the economical value in utilizing certain "systems building" applications. In this report I focus on integrated system methodologies that encourage residential building economy and submit such systems as a viable alternative to traditional labor intensive housing construction. The consumer market that could be particularly enhanced by these systems ranges from low income to middle income and the by-product would be classified as "affordable" housing.

This report focuses on the New Jersey real estate market and presents certain prefabricated housing systems as an economical means of meeting the large demand for residential …

Modal Analysis Of A Cantilever Plate, Ohseop Song

Theses

This thesis discusses the vibration of a thin, flat cantilever aluminum plate. Results are based on both an analytical finite element method using the ANSYS program and an experimental analysis using a digital Fast Fourier Transform (FFT) analyzer. The FFT analyzer permits extraction of modal parameters (natural frequency, damping, mode shape) for the plate.

Measurements Of Basic Semiconductor Properties, Abdolreza Ariantaj

Theses

Mobility, resistivity, and total impurity concentration of several purchased p-type silicon samples with known resistivities were measured by Hall effect, experiments utilizing the Van Der Pauw method. The silicon samples will serve as Hall effect standards for future measurements on other semiconductor materials, particularly gallium nitride ion cluster beam (ICB) deposited thin films. The samples which were Freshly etched with hydrofluoric acid had measurement values of 455 cm ² / V.sec, 45.9 Ω cm, and 2.6 X 10¹⁴ cm³ for mobility, resistivity, and total impurity concentration, respectively. The mobility values were within 9.9 per cent, of the published values …

Introductory Guide To Bridgeport Series I Cnc Milling, Drilling And Boring Machine, Apurva Vinodchandra Doshi

Theses

This thesis is intended to serve as an easy introductory guide on how to work with Bridgeport Series I CNC Milling, Drilling and Boring machine. An attempt has been made to make the subject matter simpler to give the reader a good start in programming and operating this machine

The spectrum of technological implementation of CNC machine tools is extremely broad,. Companies utilizing advanced technologies such as computer graphics, DNC and Group Technology are in this field for some time. Even small shops are getting equipped with CNC machine tools. The present CNC systems, which are less costly, more reliable …

A Research Study To Determine The Characteristics And Attitudes Shared By Entrepreneurs And Intrapreneurs And The Similarities And Differences Between Them, Miguel A. Vargas

Theses

The United States of America has been the mecca of many ventures for people with vision, goals and perseverance. The prosperity of our nation has been paved by individuals with great ambition, determination and insight, who have dared to take on a risk in owning a business enterprise.

This research study was conducted to determine the characteristics and attitudes of both entrepreneurs and intrapreneurs, as well as the similarities and differences between them.

For this study, a survey of entrepreneurs.was conducted through the use of questionnaires distributed to business owners located in the counties of Essex, Passaic and Hudson, in …

Osmotic And Mean Activity Coefficients Of Cacl2, Nai, Libr And Licl In Ethanol At 50 Degrees C, Gregory J. Czerwienski

Theses

Vapor pressure depression data for CaCl₂, NaI, LiBr, and LiCl were measured at a molality ranging between 0.2-7.5 depending on the solubility of the salt in ethanol. Data were also measured at 35° C for the LiCl. The apparatus used was a recirculation still of the Othmer type.

Osmotic coefficients were calculated from the total pressure of the system. The one parameter Bromley equation and the three parameter Pitzer equation were used to correlate the data. For all the systems, the Pitzer equation correlated the data better as one would expect. Mean activity coefficients were calculated graphically and …

Dispersion In The Laminar Flow Of Ellis Model Fluids Through Straight Tubes, Yeong-Hua Huang

Theses

Taylor-Aris dispersion theory is extended to the laminar tube flow of Carreau model fluids and Ellis model fluids and the results are compared with those of power law fluids. It is found that Carreau and Ellis models are more appropriate than power-law model, especially at low pressure gradient.

An exact solution to the unsteady convective diffusion equation in fully developed laminar flow in tube is obtained by applying the generalized dispersion theory of Gill and Sankarasubramanian for Ellis model. The results are compared with those obtained by Booras and Krantz for power-law model. The most interesting result of this work …

The Kinetics And Mechanism Studies Of A Polymer Powder Coating On Metal Surface By Cathodic Electrodeposition Process, Wen-Lin Wu

Theses

A polymer dispersion of fluorocarbon with solid constent in the range of 10-25% were prepared from white powder polytetrafluorethylene (PTFE), emulsifier combination of dodecylbenzyldimetlyl sulfonium chloride and Trition N-150, and other components or additives. Such a fluorocarbon dispersion is very stable against coagulation and has a pH in the range of 8-10, which is especially suitable for powder coating purpose.

A new electrocoating technique, which is called cathodic electrodeposition powder coating method, was conducted in this study. This new coating method includes four steps: pretreatment, electrocoating, drying and baking. Two kinds of degreased metal substrates, aluminum and steel plates, were …

Biodegradation Of Phenol And 2-Chlorophenol Using A Fill-And-Draw-Reactor, Chi-Chun Tsai

Theses

The biological degradation of phenol and 2-chlorophenol was studied at room temperature in a microprocesser controlled fill-and-draw reactor using activated sludge from the Passaic Valley Sewerage Commissioners wastewater treatment plant (Newark, New Jersey). The reactor was cycled through four unit processes: fill, react, settle, and draw. Different cycle times were tested, and the system response was characterized by dissolved oxygen measurements and substrate analysis (by gas chromatography).

With inhibitory substrates, such as those tested, this reactor had much more flexibility, and was therefore much easier to operate, than a standard continuous flow reactor.

The Effects Of Different Administrative Parameters On Learning In A Management Simulation, Stephen Christopher Betts

Theses

This research puts forth a set of conclusions regarding the relationship between how a full scale interactive and competative management simulation is organized and executed and how effective the experience seems to participants. One hundred sixty students who participated in management simulations in five different schools were questionaired about how effective the simulation was in teaching ten different subject areas. Their instructors and other game administators were interviewed to Find out how and why the simulation was organized and executed the way that it was in their school. The simulation used in all five samples was the Tempomatic IV. The …

Effect Of Humidity And Moderate Temperature On Microcircuit Failure, Antoine Mikhayel Chaia

Theses

The increased use of microprocessors has brought forth many questions concerning the reliability of these devices.

This research discuss the TTL integrated circuit failure rates, and provides information on the effects of temperature, device complexity and packaging on TTL failure rates under storage condition of 100% R.H. (Relative Humidity) and 100°C and no added humidity at 100°C. Other factors which can affect failure rate are also discussed, including designs, materials process.

Approximately 200 microcircuits of TTL (74LS00) were subjected to extend life testing at 100°C; where 125 chips are tested at 100°C ± 2° and no added humidity and the …

Utilization Of The Microcomputer To Improve The Productivity Of Small Manufacturing Companies, Hung-Gi Chang

Theses

The ongoing microcomputer development has led to its increasing application in manufacturing to reduce costs and improve productivity. Being more aware of this technology, most of these benefits have accrued to large firms. The intent of this thesis is to show that it is equally advantageous for small manufacturing companies to utilize them and show how they can do so.

The paper discusses the role and characteristics of microcomputers. Available software to do engineering designs, materials requirements planning, process planning, and master production scheduling is described. Using a case study a method that can be followed in selection and implementation …

Nervous System Simulation, Jian Chen

Theses

This thesis deals with the nervous system simulation. The Hodgkin-Huxley model and Stein's model are used as basic tools. The author has tried to describe some practical problems by mathematical models.

First, the horse-shoe crab eye is investigated. Light intensity is reported to the brain by the firing frequency of the photoreceptoe. A Poisson process is used to simulate the stimulus to the receptor. The result of the stochastic model coincides with the theoretical one: receptor overlapping decreases the resolving power of the eye; and the lateral inhibition compensates the effect of overlapping.

Second, a nerve muscle model was set …

A Closed Form Image Force Function For Deposition Of Particles In A Cylindrical Tube, Hsi-Chung Chiou

Theses

This study investigated the behavior of charged particles suspended in a laminar steady incompressible flow in a cylindrical tube under the influences of image , inertia , viscous and gravitational forces. A new expression for the image force was obtained by introducing an approximate potential energy function. The velocity profiles employed in the analysis were uniform and parabolic.

The governing equations derived were based on Newton's second law of motion and were solved by a Runge-Kutta numerical method. The results were obtained for different values of Q, a dimensionless inertia-charge parameter. For a value of Q equal to zero the …

On Torsional Spring Constants At The Juncture Of Piping-Nozzle, Shean-Juinn Chiou

Theses

Numerical results of torsional spring constants at the juncture of piping-nozzle are studied in this thesis by using the "ANSYS" program and run on VAX computer. These results are presented in tabulated form for a piping-nozzle vessel with constant thickness of 0.375 in. Plot for the torsional spring constants in terms of beta (nozzle radius/pipe radius), gamma (pipe radius/thickness) and alpha (pipe length/radius) are also presented in this thesis. These data are under zero piping internal pressure with beta ranging from 0.1 to 0.8, and gamma ranging from 10 to 150. A numerical example with verification is also given.

An Inventory Model For The Specialty Chemical Industry, Paul Murchison

Theses

The specialty chemical industry is a unique segment of the chemical industry. This industry produces chemical intermediate products for the pharmaceutical, agricultural, cosmetics, and other chemically related industries. Most of the products that are produced are covered by patents or involve proprietary know—how. The specialty chemical products are a minor part of a total formulation but contribute unique properties to the end product. This feature of specialty chemicals gives the manufacturer unusual pricing power compared to producers of commodity chemicals. This industry has proven to be very competitive, profitable and in the forefront of the present automation revolution over the …

Waveform Analysis Using A Micro Computer, Dakshina K. Murthy

Theses

Harmonic analysis through a micro computer was performed at Brookhaven National laboratory to determine the magnitude and extent of hormonic dIstortionon in their electrical power supply system. DT 2801 Hardware and MADCAP software were used to accomplish the Harmonic anylysis through forier transform.

Thermal Energy Storage Using Phase Change Material With Multi - Melting Temperatures, Christakis Christodoulou

Theses

Three different models are developed in this investigation, for the study of thermal energy storage, using a phase change material with multi-melting temperatures. Using Model B as the basis, the developed partial differential equations are numerically solved by a finite difference method. Two computer programs were written based on that solution, one for the charging mode and one for discharging. Finally, using the computer programs, a set of results was obtained for both charging and discharging, utilizing calcium chloride hexahydrate as the phase change material with constant and multi-melting temperatures.

Technology Transfer Between Developed And Developing Countries, Tenny Oghogho Ogbomo

Theses

The problems arising from technology transfer, in general, are not new. The problems of the East-West technology transfer, for example, are based on the risk that such transfers will enhance the military capability, or at least the military potential, of the trading partner. In the case of United States trade with the Soviet Union, it can be said that any accretion in the Soviet military capacity weighs against the United States in an overall world-wide balance of power. The restrictions and/or prohibition of such transfer of technology are problems themselves.

The North-South technology transfer, in other words, the technology transfer …

Replacement Of Surface Ducted Rays Near Caustics With Guassian Beams, Carlos Javier Ruiz

Theses

Conventional approach to a solution of a wave propagation problem in an inhomogeneous medium is to utilize either rays or modes to represent the wave field. Asymptotic ray theory (ART) starts to fail in the vicinity of caustics due to rays experiencing many reflections. Even uniform representations do not properly correct this deficiency of rays when caustics start to pile up in the far range. One possible alternative is to replace these rays with modal bundles and remainders [1]. A promising technique using Gaussian Beams has been used to represent the total field due to a point or a line …

Effects Of Physical Exertion And Caffeine Ingestion On Mental Performance, Alireza Shafiei

Theses

Stresses in man-machine systems can be broadly classified as (1) physical and (2) mental. Both types of stresses generate some kind of response in the human body. These responses could be physiological (quantitative) or behavioral (qualitative). While the physical stresses mostly create physiological changes, mental stresses may cause physiological and/or behavioral changes. The purpose of this study is to investigate such influences, and try to determine if stimulants such as coffee have any effect on people's ability to perform tasks involving a combination of physical and mental elements.

An attempt has been made to describe an interrelationship between physical exertion …

Design And Optimization Of Nmos Sense Amplifiers For Vlsi Drams, Nimish K. Shah

Theses

The aim of this thesis is to study and optimize the performance of NMOS sense amplifiers used in modern VLSI DRAMs.

Initially dynamic memory cells and popular sense amplifier circuits are surveyed.

A standard five transistor sense amplifier is later chosen for detailed analysis. Layout of the circuit is drawn to get the physical parameters. Using SPICE simulator, various effects of circuit parameters are studied. From these results optimal values of these parameters are arrived at.

Also an effort is made to derive theoretically equations for the latching time of a post amplifier which is the most important part in …

Isoparametric Finite Elements For Axisymmetric Solids, Ramanand R. Shetty

Theses

The finite element formulation of axisymmetric plane stress analysis is used to develop a computer program for numerical implementation. The basic relations used to derive the finite element equations for a solid continum are reviewed in the thesis. The programming organization is summarized and program list is given in Appendix.

The program portion for isoparametric elements are borrowed from Numerical Methods in Finite Element Analysis by K. J. Bathe and E. L. Wilson, and various other subroutines are used from Mr. Huang's thesis on Micropolar elasticity analysis. Mr. Huang's computer program is based on the work done by Dr. Nakamura …

On Radial And Rotational Spring Constants Of Piping With Square Tubing Attachment, Hson-Chih Sun

Theses

Numerical values and analytical expressions for spring constant in the radial direction, and rotational spring constants in the circumferential and longitudinal directions of piping with square structural tubing attachment are presented.

Following Bijlaard's approach, the double Fourier series solution for the thin shell equation are used to express these spring constants as a function of internal pressure, q, and pipe-structural tubing parameters, such as alpha (piping length/radius), beta (tube size/pipe dia.), gamma (pipe radius/thickness) and thickness of the structural tubing. Numerical results of these spring constants are presented in tabulated form. These Tables include a set of eight standard square …

The Stress Distribution Of The Frp Pressure Vessel By Using Ansys Program, Lung-John Tsai

Theses

The objective of this paper is to take advantage of a general purpose finite element computer program, called ANSYS, to analyze the surface stress distribution of a fiber reinforced plastic (FRP) laminated composite pressure vessel. The vessel is subjected to internal pressure, which is assumed to be constant over the interior surfaces.

In this paper, the material is assumed to be orthotropic, and the stress-strain relationship linear.

A FRP pressure vessel subjected to an Internal pressure, 6.895 MPa (1000 psi), is taken as an example. The results show that this approach compares well with a theoretical solution.

An Analysis Of Carrier Facilitated Transport In Liquid Surfactant Membranes, Pei-Jen Tsai

Theses

Mathematical models describing the mass transfer through facilitated liquid membranes are proposed and solved analytically. A self-adjoint operator method is applied to solve the coupled differential equations with discontinuity in the boundary conditions. It is assumed that equilibrium of the solute at the interfaces is maintained during the separation process. The effects of film resistance are studied/ and a first order kinetic model is used to simulate the reaction which takes place at the membrane-internal phase interface.

Experimental results indicate that the model with external film resistance consideration is in good agreement with the experimental data. This shows that most …

Multi-Channel Arrhythmia Analysis In The Clinical Exercise Electrocardiogram, Shi-Xiong Yang

Theses

This thesis studied methods of using 2 channel ECG signals for noise elimination and arrhythmia detection. Clinical data were recorded from patients stress tests and were stored on diskettes for off-line processing. Spatial velocity vector and noise estimation methods in addition to analog and digital filters were combined to remove the noise produced from different sources. Feature extraction and matched filter methods were employed for classification of normal and abnormal QRS complexs, while rhythm computing was used in addition for PVCs and other arrhythmia discrimination. This algorithm was tested on clinical stress test recordings and a computer simulated arrhythmia recording …

Plate Stress Analysis By The Finite Element Method, Wen-Jung Chuang

Theses

The finite element formulation of plate elasticity is presented and is employed in the development of the formulation of element stiffness equations. The programming structures are also summarized.

The finite element program PLATE cited from Prof. J. N. Reddy's " An Introduction to the Finite Element Method " has been used to solve the plate bending problems with quadrilateral elements. The problems solved are:

(1) deflections and stresses in a circular plate with all edges simply supported under uniform load.

(2) deflections and stresses in a circular plate with all edges clamped under uniform load.

each case including four different …

Laminar Flow In A Porous Pipe With One Plugged End, Pyne-Hwa Ku

Theses

A steady laminar flow through a co-cylinder porous pipe with one plugged end was investigated theoretically to obtain velocity, pressure and shear stress distributions.

An integral momentum equation and the Darcy's law for flow through the porous wall were solved numerically by the Runge-kutta method.

As the fluid is injected from the outer wall into the porous tube, the fluid in the inner tube is accelerated from rest at the plugged end to a fully-developed velocity profile at the exit of the porous tube. It was found that the coefficient of the wall shear stress and the dimensionless pressure drop …