Engineering Commons^™

Efficient Hypercube Communications, Shreyas R. Bhatt

Theses

Hypercube algorithms may be developed for a variety of communication-intensive tasks such as sending a message from one node to another, broadcasting a message from one node to all others, broadcasting a message from each node to all others, all-to-all personalized communication, one-to-all personalized communication, and exchanging messages between nodes via fixed permutations. All these communication patterns are special cases of many-to-many personalized communication. The problem of many-to-many personalized communication is investigated here.

Two routing algorithms for many-to-many personalized communication are presented here. The algorithms proposed yield very high performance with respect to the number of time steps and packet …

Biodegradation Of Phenol And Benzoic Acid In Batch And Sequencing Batch Reactors, Stephane Reynaud

Theses

A pure culture of Pseudomonas aeruginosa ( ATCC 10145 ) was used for the biodegradation of phenol and benzoic acid. Two sets of small scale (shaker flask) experiments were originally performed: in the first set, phenol was the only carbon source present while in the second, benzoic acid was the sole carbon source. These experiments revealed the kinetics of benzoic acid degradation (they were found to be described by a Monod, non-inhibitory model), as well as of phenol biodegradation (they were found to be described by Andrews'inhibitory model) by Pseudomonas aeruginosa.

The kinetic expressions from the small scale experiments …

Eies 2 : A Distributed Architecture For Supporting Group Work, Computerized Conferencing & Communications Center, James Whitescarver, Robert M. Czech, Sreenivas Reddy, Ajaz R. Rana, Murray Turoff

Computerized Conferencing and Communications Center Reports

The Computerized Conferencing Center (CCCC) at New Jersey Institute of Technology (NJIT) has been researching on-line group communications for 17 years by developing and studying tools to advance the "collective intelligence". The Electronic Information Exchange System 2 (EIES2) provides a research, development and operational environment for distributed computer supported cooperative work (CSCW) systems. The EIES 2 distributed Smalltalk processor provides for rapid prototyping and implementation of muti-media CSCW facilities in the network environment. The Smalltalk support of the object model, and meta-language properties make it ideally suited for incremental development CSCW applications. The EIES2 communication environment supports a decentralized network …

Behavior Of Square And L-Shaped Slender Reinforced Concrete Columns Under Combined Biaxial Bending And Axial Compression, Wen Hu Tsao

Dissertations

A numerical analysis was developed to evaluate the complete load-deflection and moment-curvature relationships for square and L-shaped slender reinforced concrete columns subjected to biaxial bending and axial load. This computer model can be used for any cross section geometry and material properties of normal concrete. The analysis was based on a deformation control and both the ascending and descending branches of curves can be studied. The finite difference method was introduced to calculate the deflections which satisfy the compatibility equations. Six square slender columns and eight L-shaped slender columns were tested to compare their experimental load-deformation results with the analytical …

A Generalized, Parametric Pr-Qmf/Wavelet Transform Design Approach For Multiresolution Signal Decomposition, Hakan Caglar

Dissertations

This dissertation aims to emphasize the interrelations and the linkages of the theories of discrete-time filter banks and wavelet transforms. It is shown that the Binomial-QMF banks are identical to the interscale coefficients or filters of the compactly supported orthonormal wavelet transform bases proposed by Daubechies.

A generalized, parametric, smooth 2-band PR-QMF design approach based on Bernstein polynomial approximation is developed. It is found that the most regular compact support orthonormal wavelet filters, coiflet filters are only the special cases of the proposed filter bank design technique.

A new objective performance measure called Non-aliasing Energy Ratio(NER) is developed. Its merits …

Analytical Methodology For Atm Control Panel Design, Donald C. Johnson

Theses

This thesis presents a methodology for control panel design and layout along with a case study of an automated teller machine (ATM). A predictive model of human endurance and fatigue is developed from anthropometric, biomechanical and kinematics research. The layout problem is formulated to assign controls to locations to minimize the fatigue imposed on an operator performing a known set of tasks. A family of optimal and near-optimal layouts are found using conventional algorithms. The final hardware design refinements are suggested by human factors concerns. Ergonomic guidelines are also proposed for software aspects of the design. The methods and guidelines …

Computer-Aided Process Planning (Capp) Sorich, Sohail Pirzada

Theses

The last two decades have witnessed the increasing role of the computer in the process planning function. This has been further enhanced by the advent of the knowledge based expert system, and its impact on Computer Aided Process Planning (CAPP). CAPP has emerged as a strategic link between design and manufacture. This thesis discusses the various methods used in the process planning function. Group Technology (GT) plays a pivotal role in establishing CAPP. The utilization of Artificial Intelligence techniques in CAPP is listed. This study also presents an Interactive Software adaptive to product/part configuration variables.

Error Detection And Correction In Compressed Data, Nadir Sezgin

Theses

Encoded data is very sensitive to the channel errors. Especially if the data is compressed by Arithmetic Encoding procedure, then the error propagation is very high. The error propagation in Arithmetic Coding is studied. Exploiting the high error propagation property when compressing data by Arithmetic encoding procedure, two different algorithms have been proposed for error detection and correction. Under certain conditions these algorithms detect and with a very high probability correct the errors introduced to the compressed data.

Conditional Artificial Dielectrics ; Fabry-Perot Etalon, Ling-Yi Hu

Theses

Fabry-Perot etalons are optical resonators comprise of two mirrors and a spacer layer. By embedding a thin, photo-sensitive layer ( Conditional Artificial Dielectric - CAD layer ) in the middle of the spacer layer, we were able to photo-control the transmission properties of a Fabry-Perot etalon. Different structures have been analyzed and measured to find that a change of .01 was photo-activated in the refractive index of the Conditional Artificial Dielectric layer.

Computer Control For 2-Axis Magnetic Suspension System, Jian Chen

Theses

A two-axis magnetic suspension system. using linear-potentiometer position sensing and DC solenoids, controlled digitally by a 80386 microcomputer has been built and operated in our laboratory. Control algorithms obtained by combining the full-state feedback control law with two methods of estimating velocities are studied. One method uses a nonlinear reduced-order observer; the other uses a finite difference algorithm. The nonlinear reduced-order observer performs better in simulation but the difference algorithm takes less calculation time and is used in the implementation. The system has been operated successfully to suspend weights up to 1.2 lb. and to get a slant angle more …

Influence Of Heavy Metal Concentration On Rotating Biological Contrator Performance, Huei-Sheng Cheng

Theses

Seven heavy metals ( Fe⁺², Mn⁺², Zn⁺², Ag⁺, Pb⁺², Cu⁺², Cd⁺² ) at various concentrations were investigated in a Rotating Biological Contactor (RBC) system. The experimental data indicated that the degree of heavy metal toxicity in the biological system mainly depended on the ratio of inflow heavy metal concentration to organic loading. The optimal ratio of heavy metal to organic loading was determined on the basis of the maximum removal of chemical oxygen demand (COD) under different operating conditions. In addition, the effect of heavy metal on …

Bridge Deterioration Models, Christopher R.H. Howard

Theses

The deteriorated condition of America's bridges raises the need for a proper and optimal method of bridge management, from the conceptual stage through the construction stage, and throughout the useful life of our bridges. State agencies need to expand their data collection process so as to include additional information pertinent to the formulation of a credible system. This is critical in order to accommodate increased research efforts to investigate the behavioral pattern/s of the nations bridges and to eventually optimize bridge management systems. This thesis looks at the bridge deterioration model as a vital tool in realizing more effective bridge …

Liquid-Liquid Dispersion In Agitated Vessels Provided With Multiple Impellers, Yu-Tsang Huang

Theses

Baffled vessels with multiple impellers are widely used in industry to generate liquid-liquid dispersions. In this work, a new method to determine the minimum agitation speed for complete dispersion in two immiscible liquids was developed. This method was conceived to replace the traditional visual observation method that has been extensively used in the past for this purpose. The minimum agitation speeds for liquid-liquid dispersion with single and multiple impellers in baffled vessel were also measured. The effect of a number of variables such as size and type of impellers, size of tank, impeller location, spacing between impellers, and dispersed phase …

Response Characteristics Of Inelastic Single Degree Of Freedom Systems Subjected To Intraplate Earthquakes, Linda C. Jones

Theses

Within recorded, although not recent, history, there have been several large magnitude earthquakes in the Eastern and Central United States and the need to provide measures to protect from potential damage is recognized by the engineering community. Since there are inherent differences between earthquakes that occur along tectonic plate boundaries, interplate, and those that occur within the plate boundaries, intraplate, it is important to understand how these differences impact structural design. A parametric study of single degree of freedom systems subjected to various recorded and artificial ground motions was performed to identify the variations in response characteristics.

It was found …

Studying The Mechanical Response Of Outer Hair Cells To Electric Pulses Using Image Sensors, Wayel F. Mutlag

Theses

The purpose of this research was to develop a way to improve the method used by Dr. Santos-Sacchi at the University of Medicine and Dentistry of New Jersey to detect the motion of the outer hair cell (OHC). As part of the work, the construction and functioning of the OHC are presented and two designs to detect the motion of the boundary of the OHC were investigated.

The first design utilizes the position sensitive detector (PSD) S3932 made by Hamamatsu Inc. This detector, however, required excessive intensity of the optical signal that was not compatible with the operation of the …

Temperature Regulation Post Hemorrhagic Shock In Rats : Atheoretical Analysis, Kahambwe Shungu

Theses

The adequacy of a mathematical model in simulating temperature regulation in rats after resuscitation from hemorrhagic shock is investigated. This model, proposed elsewhere, was devised to study temperature profiles during hyperthermia in humans.

Hemorrhagic shock was achieved by bleeding rats to an average mean arterial pressure (MAP) of 30mmHg. The rats were then maintained at this MAP for up to four hours by withdrawing or reinfusing the shed blood. One group (the control group), was allowed to return to normal body temperature after the shock episode without external intervention. A second group (microwave group) was irradiated, for an average of …

A Study Of The Potential Funding Mechanism For Surface Transportation In The New York Metropolitan Region, Krishnaveni Venkataswami

Theses

The present network of highways, soaring bridges, airports, seaports, and transit systems that serve the New York Metropolitan region are part of this region's inheritance from the generation of Americans who built them before us. These massive and sometimes daring achievements supported the economic growth of the region. Now that inheritance is in danger. The quality of the region's transportation infrastructure is barely adequate to fulfill current requirements, and insufficient to meet the demands of future economic growth and development. We are spending our inheritance.

A major problem is financial. Overall investment in transportation has slowed down in the last …

Position Recovery And Motion Analysis From Stereo Image Sequences, Yuxin Xie

Theses

Based on four stereo images, a new concept of unified optical flow field has been developed recently [3]. It is a generalization of the optical flow in stereo imagery. A set of fundamental equations is established to characterize the unified optical flow field. Another set of equations is then derived from which 3-D structure can be reconstructed and its motion can be analyzed by the use of the unified optical flow field quantities. In this thesis, we use some synthetic images of a rotated conical structure to study and test the theoretical results. The simulation and results are presented, thus …

An Implementation Of Bionomial-Qmf For Subband Coding Of Speech, Feng Chen

Theses

A real-time subband speech codec is implemented by the author on TMS320C25 digital signal processor based hardware for speech compression down to 0.25 bit per sample.

The Binomial Quadrature Mirror Filters (B-QMFs) are employed as the basic block for the hierarchical, dynamic tree, analysis/synthesis filter bank. After the analysis, available bits are optimally allocated among subbands. Band statistics are updated to overcome the nonstationarities of speech signal.

The energy compaction performance of this codec is compared with different subband and DCT in simulations for speech signals and AR(1) source models.

It is shown that the speech codec implemented provides an …

Vision-Guided Servoing Robot Arm System, Shing Lee

Theses

This thesis investigate the problem of tracking 2-D circle parts with an eye-in-hand robot arm system. A vision module capable of measuring the motion of a circle is developed. Two algorithms based on the conic equation representation of circle and the symmetric property are developed. The first algorithm approximates the image of the circle as an ellipse. The second algorithm use the arc radius estimator to extract two image points of the circle located at the center of the largest arc. These image points are then used to solve for the inverse perspective transformation. An inverse kinematics solution based on …

Simulation And Modeling Of Kinetics Of Silicon Oxidation In The Thin Oxide Regime, Tirthankar Dutta

Theses

Thermal oxidation of Silicon in dry O₂, in the thin regime(< 500A) is of vital importance to VLSI device engineers, because thin layers of SiO₂ are exclusively used as gate dielectric for high performance of MOS devices. There exist a number of models to explain the kinetics of oxidation in this thin regime. However there is considerable variance among them and the reported rate constants, which are supposed to describe the oxidation process. Rather than arriving at an alternative model, the present study aims at an extensive study and simulation of existing models of oxidation in dry oxygen, in the thin regime, with a recent set of experimental data and …

Advanced Manufacturing Applications Of Cost Estimating Techniques For Metal Cutting Industries, Zubair Hamid

Theses

In this work, different cost estimating techniques in metal cutting industry were studied. A basic understanding of estimation concepts were given. The typical breakdown of total cost was also given and discussed in details. Practical applications of cost estimating is studied. The effect of different parameters which relate to the lot sizes or quantity were discussed. All these results show that total cost is minimum at a point which is called least cost point, after that cost increases because of the addition of extra resources, in terms of man, machine and increase in administrative expenses.

Biodegradation Of Tnt (2,4,6-Trinitrotoluene), Jin Lou

Theses

This study summaries the results of various methods treating 2,4,6-trinitrotoluene (TNT). Review of available literatures revealed that the most commonly used techniques in full-scale plant for TNT removal are chemical oxidation and carbon adsorption.

From economic point of view, the biological treatment system will be much more cost-effective. Various methods for improving the efficiency of biological system treating TNT wastewater were developed in the laboratory. Current laboratory results show that by isolating appropriate microorganisms under adequate conditions, TNT wastes can be degraded successfully.

At the some time, some pretreatment technologies are recommended in this study for improving the performance of …

Design For Manufacturability (Computer Aided Optimum Gear Design), Narayan R. Mareddy

Theses

Design for manufacturing has design as the first manufacturing step. It is important to recognize the importance of design clubing with manufacturing to reduce the production, set up time. In this thesis concepts of design, manufacturing and four different ways of bringing design and manufacturing together are discussed in detail.

As there are large number of variables in the gear rating equations, it is very difficult to achieve optimum design by manual methods unless an extensive trial and error process is carried out. An algorithm has been developed which allows rapid convergence to the optimum gear design. The algorithm has …

Redesign Of Parts And Simulation Of Flexible Assembly Cell For Safety Water Shower Assembly, Balraj Y. Gardilla

Theses

A Design for Assembly (DSA) method is used to analyze the safety water shower assembly and to redesign the components with emphasis on meeting the criteria of allowing for flexible Assembly Cell (FAS). An Expert System is developed to select the right Assembly using VP-Expert. This thesis contrasts the old and new safety water shower assembly designs and describes the design of a final Flexible Assembly Cell. A PUMA 550 robot was investigated for use in the cell design. The flexible Assembly cell is simulated on silicon graphics using the IGRIP software. The economics of each part presentation method is …

Software Development For Analysis Of Stochastic Petri Nets Using Transfer Functions, Aman U. Jamwal

Theses

This thesis research is an implementation of a closed-form analytical technique for study, evaluation and analysis of Stochastic Petri Nets (SPN). The technique is based on a theorem that an isomorphism exists between an SPN and a Markov Chain. The procedure comprises five main steps: reachability graph generation of the underlying Petri net, transformation of the reachability graph to a state machine Petri net, calculation of transfer functions, computation of equivalent transfer functions via Mason's rule, and computation of performance parameters of the SPN model from the equivalent transfer functions and their derivatives. The software is developed in UNIX using …

Frictional Resistance Of Geotextiles, Md. Khairul Alam

Theses

The pullout resistance of geotextiles was examined using pullout tests. A suitable wooden box with large (2 ft x 2 ft x 4 ft) dimensions was used to avoid the effect of boundary and to simulate field conditions. Two types of failure patterns were observed. For shallow embedment (<3 ft), geotextile produced a movement of the surrounding mass of sand in the shape of an inverted cone due to interlocking friction between geotextile and sand particles. The cone angle decreases with increase in depth of embedment. For embedment equal to or greater than 3 ft., no sand cone developed and the failure occurred along the interface of geotextile and sand. For 1 ft. surcharge, the increase in the pullout resistance due to combined horizontal and vertical embedment was about 30 %.

Minimum-Time Control For Submarine Interception, Zaiping Chen

Theses

This thesis attempts to offer a possible improvement for conventional anti-submarine system which is mounted on warship. It consists of two parts: the control law and its realization concerning the particular problem. The control based on optimal theory is devised for three-dimentional minimum-time interception. A microprocessor system is also designed to achieve all necessary steps to track and attack the target. The thesis focuses on the question of how to launch a group of subcharges to destroy a submarine cruising under water: find the optimal trajectory by developing a numerical method to solve the nonlinear dynamic system and design a …

Design And Development Of An Automated Assembly System In A Discrete Manufacturing Environment, Sandeep K. Desai

Theses

This work is dedicated to extend the technology of automated assembly to include small and thin parts, light in weight. As the parts are thin a problem exists in the feeding process and orientation. The objective of project is to overcome this difficulty. The main theme of this thesis is to reduce labor cost and to improve productivity and quality of assembly operations by introducing low cost automation in the companies having discrete manufacturing environment.

An example of assembly involving a thin part has been selected. Two components from an electrical switch assembly are chosen, namely the spring and rivet. …

Design Of An Advanced Control Algorithm For A Nuclear Power Plant Feedwater Control System, Randall C. Ezzo

Theses

Electric power companies with nuclear power plants have been aggressively looking for ways to increase plant safety and availability by increasing the reliability and performance of the plant's control systems. The performance of the Oyster Creek Nuclear Station's feedwater control system can be significantly improved by replacing the proportional-integral compensator with a compensator based on modern control concepts. In response to a -10 inch reactor water level setpoint change, settling time is improved from 107 seconds with 3% overshoot to 34 seconds with no overshoot.