Engineering Commons^™

Fourier Transform Infrared (Ftir) Spectroscopy Analysis Of Combustion Aerosol, Gary Jacquin

Opportunities for Undergraduate Research Experience Program (OURE)

In conjunction with my co-op program at McDonnell-Douglas, my current OURE project is the analysis of combustion aerosols using Fourier Transform Infrared (FTIR) Spectroscopy. Aerosol science is a very important field as it is concerned with atmospheric chemistry, atmospheric physics, climate, public health, and environmental issues.

In the Cloud and Aerosol Sciences Laboratory (CASL) at UMR, combustion aerosols are generated by an in-house designed torch or burner. The fuels, JP4 and JP5, are provided by McDonnell-Douglas. Some other commercial fuels are also used. The primary objective of my OURE project was to generate and collect combustion aerosols for chemical analysis. …

Control And Data Reduction Software For Umr Neutron Spectrometer, Matthew K. Mclaughlin

Opportunities for Undergraduate Research Experience Program (OURE)

A double-scatter time-of flight neutron spectrometer has been obtained by the Nuclear Engineering department of the University of Missouri-Rolla (UMR). As this device was an experimental prototype which was never brought to full operation, the chance to work with two of the original builders of the spectrometer at EG&G Idaho was an excellent opportunity. Part of the work being done with the detector is the development of a PC-based software package for machine control, data acquisition, and data reduction. It is this part of the project which has been supported by UMR’s Opportunities for Undergraduate Research Experience (OURE) program.

Implementation Of The Articulated Total Body (Atb) Model On An Apollo Workstation, M. F. Laudon

Opportunities for Undergraduate Research Experience Program (OURE)

The Articulated Total Body Model (ATB) is used for predicting gross segmented body response in various dynamic environments. The ATB computer program, originally written by the Department of Transportation as a Crash Victim Simulation (CVS) program, was later modified by the Calspan Corporation and More recently by the Armstrong Aerospace Medical Research Laboratory (AAMRL) to allow for aerodynamic force applications, harness belt capabilities and hyper-ellipsoidal graphical display of the modeled segments. The ATB model has been successfully used to investigate gross human body responses to bodies placed in such complex dynamic environments as high-speed aircraft ejection. This ATB model is …

Simulation Modeling In Manufacturing Cell Design, Debra A. Hunke

Opportunities for Undergraduate Research Experience Program (OURE)

The interwoven phases of the manufacturing process in Computer Integrated Manufacturing (CIM) require a carefully designed facility. Simulation modeling can be combined with other techniques to provide a rigorous methodology for CIM system design. This paper describes CIM, simulation ana their relationship. A case study demonstrates the described methodology in the design of a flexible manufacturing cell.

A Computer Simulation Of The Umr Reactor, H. Allen Wilkins

Opportunities for Undergraduate Research Experience Program (OURE)

The Opportunities for Undergraduate Research project entitled, "A Computer Simulation of the UMR Reactor" had two goals. To produce a reactor simulation to be used in creating an artificial intelligence based reactor simulation for the UMR Nuclear Reactor and to produce a means of teaching students the fundamentals of reactor operations.

The primary purpose was to create a program which would simulate all the situations one would encounter in actual reactor operation. With the simulator the artificial intelligence system could be thoroughly tested before use with actual reactor data.

This same simulator would be used as a teaching aid for …

A Computer Graphics Program For Displaying Water Molecules On A Dn3500 Apollo Workstation, Michael A. Stuller

Opportunities for Undergraduate Research Experience Program (OURE)

A computer graphics program is developed for displaying water molecule configurations on the screen of a DN3500 Apollo workstation. The motivation was to generate a fast display of output from molecular dynamics or Monte Carlo computer simulations. Input to the program consists of a listing of the Cartesian coordinates of the atomic constituents of the molecules. Options in the program include: 1) number of molecules; 2) plot size; 3) atomic radii; 4) superposition of substrate atomic positions; 5) viewing angle; and 6) color-coded and/or numbered atoms. The program is written in Fortran.

The Detection And Quantification Of Atrophic Rhinitis Using Ditigal Image Processing Techniques, Timothy Mussman

Opportunities for Undergraduate Research Experience Program (OURE)

This project focuses its attention on the detection and quantification of Atrophic Rhinitis (A.R.), a disease prevalent in pigs. A.R. causes some of the bony structure in a pig's snout to atrophy, which exposes the animal to other diseases that may effect its growth. It is studied by examining a cross section of the pig's snout. By comparing areas and perimeters of the nasal cavity to bony structures, or turbinates in the snout, one can determine the severity of the atrophy. Currently, the veterinarians diagnosis is based on a subjective analysis of the snout. The problem with this method is …

Establishment Of A Phase/Doppler Particle Analyzer For Two-Phase Flow Experiments, J. L. Burget

Opportunities for Undergraduate Research Experience Program (OURE)

The accurate measurement of liquid spray drop size and velocity is important in a variety of applications. These applications include agricultural sprays, furnaces, spark ignition and compression ignition engines, gas turbines, and a variety of industrial processes. Because of the need to improve combustion efficiency and minimize soot and other harmful emissions, one of the most active areas of research is fuel spray combustion. Quantitative measurements of the vapor phase in fuel sprays is vital to the understanding of spray dynamics and the operation of combustion devices.

There are various measurement techniques available to measure vapor phase characteristics in a …

Border Detection Of Skin Tumor Images, Mike Tiehes

Opportunities for Undergraduate Research Experience Program (OURE)

Border detection of skin tumor images is part of a research project whose purpose is to identify key features in skin tumor images using machine vision techniques. The key features present in a skin tumor guide the dermatologist in making the proper diagnosis. A few examples of key features are crust, scale and ulcer.

The Electrochemical Characterization Of Ferrocene As A Guest Molecule In The Presence Of Ss-Cydodextrin, Anne T. Roberson

Opportunities for Undergraduate Research Experience Program (OURE)

This experiment involves the development of electrochemical experimental methods for the determination of the oxidation/reduction potentials of a guest ferrocene complex (C₁₀H₁₀Fe) hosted by ß-cyclodextrin. The project was conducted so that the specific interaction of two molecules forming a unique inclusion compound can be used as a model for rapid analysis of other small molecules. In principle, the study is based on the expected equilibrium interaction of the iron compound with ß-cyclodextrin resulting in a complexed and an uncomplexed species equilibrium. The project's experimental objective is to determine if the redox potentials of both complexed and …

Evaluation Of Film Coated Window Glass Subjected To The Effects Of Windstorms, Ronald B. Shankland Jr.

Opportunities for Undergraduate Research Experience Program (OURE)

The harm incurred by structures, equipment, and people due to window unit failure during a windstorm is drastically reduced if the glass remains in the frame until the storm has subsided.

There are basically two types of window glass used in curtain wall cladding systems: heat treated and annealed. Heat treated glass is tempered during its manufacture so that it retains residual surface stresses in the range of 3500 psi to 10,000 psi, or more. Annealed glass is cooled very slowly under controlled conditions in order to remove undesired internal stresses (Reznik, 1987). Also known as float glass, annealed glass …

Noise Generators For The Simulation Of Digital Communication Systems, Martina F. Schollmeyer, William H. Tranter

Electrical and Computer Engineering Faculty Research & Creative Works

The generation of random numbers, having uniform and Gaussian distributions, with application to the time-domain simulation of communication systems is considered. The specific goal is to identify appropriate noise generation algorithms for use in system simulations for the determination of the symbol error probability of a digital communication system. Several methods of generating both uniform and Gaussian random numbers are examined. The algorithms considered were taken from those discussed in recent literature that appeared most appropriate for our problem. The algorithms were programmed in FORTRAN for use on a PC with math-coprocessor. Tests to evaluate the statistical properties of the …

Vapor-Liquid Equilibrium Data For The Nh3-H2o System And Its Description With A Modified Cubic Equation Of State, Thomas M. Smolen, David B. Manley, Bruce E. Poling

Chemical and Biochemical Engineering Faculty Research & Creative Works

New pressure-temperature-overall composition vapor-liquid equilibrium (VLE) data are reported for the ammonia-water system at five temperatures between 20 and 140 °C and up to 500 pela. These data have been converted to T-P-x data, and vapor-phase compositions have been calculated by means of a Rediich-Kwong equation of state modified to Include Peneloux's volume translation and a density-dependent mixing rule. In order to achieve agreement of calculated vapor-phase compositions with previous literature results, H was necessary to use different kij values In the vapor and liquid phases. © 1991, American Chemical Society. All rights reserved.

An Architecture Level Simulation Methodology, Paul D. Stigall, Ram Huggahalli

Electrical and Computer Engineering Faculty Research & Creative Works

Using the Architecture Design and Assessment System (ADAS), the Processor Level Architecture of an Example Computer System is First Represented as a Directed Graph. Then, a Method of Simulating Instruction Execution as a Sequence of Data Transfers between the Nodes of the Graph is Presented. the Simulation Methodology Provides Flexibility in Observing the Architecture Dynamically at the Processor Level. an Example Application for Functional Verification is Discussed. Development of Techniques to Convert Programs into Node Sequences And, to Assign Appropriate Delays to the Nodes is Necessary to Further Enhance the Applicability of the Methodology. Functional Verification and Performance Estimation through …

Computation Of Dynamic Large Displacements In Earth Systems, Mohamed Fadel Succarieh, Jerry I. Lin, Ahmed-Waeil M. Elgamal

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

A model for the computation of seismically induced permanent displacements is earth structures are proposed. This model allows relative sliding between different zones of the structure under investigation. Large displacements are allowed between these zones. Elasto-plastic constitutive soil behavior is accounted for. An updated Lagrangian Jaumann Finite Element formulation is used. The proposed model is used to predict the observed behavior of LaVillita Dam during the November 15, 1975 earthquake.

A Variational Formulation For Classical Models Of The Slope Stability With Earthquake Effect, Petr Koudelka, Petr Procházka

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

The paper deals with an extension of application of the Method of Apriori Integration to a model of a general slope, which is partly homogeneous and which is loaded also by the earthquake effect. The most dangerous direction of the power effect of the vibration is shown and for this direction the change of safety factor is discussed. The effect of reduced shear strength is included.

Consideration Of Earthquake Damage To Earth Dam For Irrigation In Japan, Shigeru Tani

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

There are many small earth dams for irrigation called "TAMEIKE" in Japan, Most of them were constructed before modern soil engineering were established on the basis of empirical techniques. Earthquakes in the past gave much damage to these earth dams. This paper surveys damage of earthquake for those remaining on records again, and as for Nipponkai-Chubu Earthquake, detailed investigations such as in-situ test, laboratory test, analysis were made to clarify causes of the damage to earth dams. From the result of survey, the following matters were found; i.e., large damages occur at a high rate on earth dams whose foundation …

Displacements Of Slopes Under Earthquake Loading, L. J. L. Lemos, P. A. L. F. Coelho

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

The displacements and rates of displacement of slopes post-rupture are influenced by the dynamic response of soils. Pre-existing shear surfaces at or close to residual strength are frequently present in slopes of clay and weak mudstone, due to previous slope movement or tectonic disturbance. Knowledge of the strength of such surfaces under rapid loading is necessary of stability during and after an earthquake is to be examined. To obtain such data, high speed displacement controlled ring shear tests have been performed, on samples after being pre-sheared to residual conditions. With the results from those tests, suitable constitutive laws were derived …

Dynamic Response Of Earth Dam-Foundation System, Lin Gao, Guan Fei

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

A numerical procedure is proposed to analyze the seismic response of structure resting on layered medium. By this approach the effects of the dynamic soil-structure interaction (DSSI) upon the response of earth dam on multi-layered half space subjected to seismic ground motions are studied. The dynamic responses of earth dams on rigid base are also evaluated to compare with those on a flexible homogenous half space. It is noted that great differences may arise between the results of the two cases. To investigate the influence of the truncated size of foundation in horizontal direction on the dynamic response of the …

Effects Of Earthquake Induced Liquefaction Of Sediments Stored Behind Concrete Dams, Peter M. Byrne, Li Yan, T. Srithar

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

Earthquake induced liquefaction of sediment stored behind dams can give rise to high uplift pressures which could endanger their safety. The uplift pressures depend upon the permeability and compressibility of both the sediment and the foundation and are controlled by Biot's equation. Uplift pressures are computed for a single dam and foundation with a range of properties. The results show that for the conditions analyzed, the uplift pressures are largely controlled by the foundation permeability with the largest uplift pressures occurring for the highest foundation permeability. The possibility of liquefied sediment flowing into fissures in the foundation rock is also …

Inelastic Seismic Response Of San Fernando And Santa Felicia Dams, Elsa Stara-Gazetas, Ricardo Dobry

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

A simplified method of inelastic seismic analysis of earth dams developed by the authors is used to study the response of the San Fernando and Santa Felicia dams to accelerograms recorded in the 1971 San Fernando Earthquake. The method involves two separate stages. In stage I, the dam is discretized into finite elements and is subjected to horizontal static inertia-like forces; its nonlinear deformation is computed using a plane strain code, while the applied horizontal forces are gradually increased until large enough strains develop in most elements of the dam. The results of this analysis are utilized to derive realistic …

Measured And Calculated Dynamic Response Of Rock-Fill Dam, Lelio H. Mejia, Katherine Fung, David W. Sykora, Joseph P. Koester, Mary E. Hynes

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

The U.S. Army Corps of Engineers recently completed a seismic stability assessment of the Ririe Darn and Reservoir Project located near Idaho Falls, Idaho. Ririe Darn is an earth- and rockfill darn with a central impervious core constructed between 1966 and 1975 in a narrow canyon of Willow Creek. A geologic and seismologic study indicated that the controlling maximum credible earthquake (MCE} is a Magnitude 7.5 earthquake at a distance of 8 km from the darn. The seismic stability analysis included a dynamic response analysis of the darn using two-dimensional finite element procedures. Empirical relations derived from the observed response …

One- And Two-Dimensional Analysis Of Earth Dams, D. J. Elton, C. F. Shie, T. Hadj-Hamou

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

Earth dams may experience reduction in shear strength due to seismically induced pore pressures. Such reduction may be large enough to result in large deformations and eventual loss of the reservoir. While the analysis of embankment dams subject to earthquake loading is a complicated process, it is required for evaluation of seismic stability. In particular, the possibility of liquefaction in older, hydraulically-filled or otherwise poorly compacted dams during earthquakes presents a threat that must be addressed. This paper compares two methods of calculating the peak dynamic shear stress (critical to liquefaction evaluation) that occurs in an embankment during an earthquake. …

Response Of Earth Dams In Canyons Subjected To Asynchronous Base Excitation, Panos Dakoulas, Humayun Hashmi

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

A mathematical solution is presented for steady-state lateral response of earth and rock fill dams in canyons subjected to asynchronous excitation consisting of obliquely incident SH waves. The dam is idealized with a 2-dimensional shear wedge and the canyon is considered rectangular and consisting of flexible rock. A parametric study is undertaken to investigate the influence of (a) the angle of incidence, (b) the impedance ratio and (c) the canyon narrowness on the steady-state response, by considering in a simplifying way the effects of the dam-canyon interaction. The results demonstrate that the above factors may have a significant effect on …

Seismic Stability Of Hillslopes In Greater Cincinnati Area, M. Zoghi, A. Bodocsi

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

Slope stability problems involving colluvia on shale bedrock are common in the Greater Cincinnati Area. The behavior of these hillslopes during earthquakes is, however, not known. This gives cause to speculation whether they are vulnerable to earthquake vibrations. In order to verify the response of these slopes to earthquake induced ground motions, representative composite clay shale samples obtained from a typical colluvial hillside in Cincinnati were tested in a cyclic direct shear apparatus which was attached to a load cell from the MTS piston actuator. The samples were initially consolidated under a selected normal pressure and then sheared until residual …

Stability Analyses In The Ports Of Long Beach And Los Angeles, Allen M. Yourman Jr., Gerald M. Diaz

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

The combined Ports of Los Angeles and Long Beach (Ports) have experienced extensive growth over the last three decades. A main feature of the expansions is the creation of new land by placing hydraulic fill behind rock retention dikes. This paper presents an overview of the recent history and state of practice of slope stability analyses performed for projects related to the expansion of the Ports. The geologic and seismic setting and typical soil conditions are also described. This paper is based on a review of geotechnical reports prepared for projects in both Ports and selected published papers. The various …

Attenuation Laws Considering M And R Uncertainties, Sun-Rong Huo, Yuxian Hu

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

Accounting for the measuring errors or uncertainties of magnitude and distance in addition to ground motion, the attenuation laws for peak horizontal ground acceleration (PGA), velocity(PGV). And displacement (PGD) are studied with a weighted consistent least-square regressional method (WCLSRM) proposed by the authors to obtain the functional relation among several random variables (R.V.). The saturation of ground motions near epicenter with respect to both magnitude and distance is also emphasized in the models. The result is that the scaling factors for distance and the linear term of magnitude in the attenuation relations regressed by the suggested method are about 16 …

Bem-Fem Hybrid Analysis For Topographical Site Response Characteristics, Hirokazu Takemiya, Masaki Ono, Kiyotaka Suda

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

This paper concerns an amplification of seismic ground motions by a certainly shaped surface soil deposits in view of its topographical configuration. Different hybrid methods of the boundary element method (BEM) and the finite element method (FEM) are used for the two-dimensional (2- D) analysis. In the analysis, the far field impedance is first evaluated by BEM then it is incorporated into the near field FEM analysis based on the weighted residual method. The steady state responses for different types of harmonic incident waves are investigated. Some useful findings are pointed out in comparison with the one-dimensional (1-D) results.

Dynamical Behavior Of A Slightly Alluvial Basin Due To Concentrated Turbulence, Takashi Nishigaki, Kensuke Baba

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

This paper is concerned with theoretical analyses and numerical evaluations based on the wave propagation theory to find dynamic characteristics of an alluvial basin locally situated on a half spatial bedrock due to concentrated loadings on the free surface. The method presented herein is derived from the Aki and Larner's method by releasing the assumption of the repeated irregularities, so that the wave field having localized irregularities can be evaluated. The numerical analyses show that the amplification effects are obvious on the free surface inside the alluvial sediment and the subsurface structure influences the seismic behavior observed on the surface.

Effect Of Local Soil Stratigraphy On Microtremor Measurements, George Bouckovalas, Ioanna Krikeli

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

The method of microtremors has been recently applied for the microzonation of the town of alamata, in southern Greece. Results from this study are evaluated in comparison with predictions of seismic ground response obtained by 1-D wave propagation analyses. Predominant periods of microtremor are considerably lower than estimated fundamental ground periods. It is shown that a small part of the observed differences in due to soil non-linearity in connection with the small strain amplitudes induced by microtremors. The largest part appears to be due to geologic factors, namely the existence of rigid soil layers within the soft soil above the …