Engineering Commons^™

Projected Effect Of 2000-2050 Changes In Climate And Emissions On Aerosol Levels In China And Associated Transboundary Transport, H. Jiang, H. Liao, H. O.T. Pye, S. Wu, L. J. Mickley, J. H. Seinfeld, X. Y. Zhang

Michigan Tech Publications, Part 1

We investigate projected 2000-2050 changes in concentrations of aerosols in China and the associated transboundary aerosol transport by using the chemical transport model GEOS-Chem driven by the Goddard Institute for Space Studies (GISS) general circulation model (GCM) 3 at 4° × 5° resolution. Future changes in climate and emissions projected by the IPCC A1B scenario are imposed separately and together through sensitivity simulations. Accounting for sulfate, nitrate, ammonium, black carbon (BC), and organic carbon (OC) aerosols, concentrations of individual aerosol species change by -1.5 to +0.8 μg m-3, and PM2.5 levels are projected to change by about 10-20% in eastern …

Me-Em Enewsbrief, September 2013, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Reconstruction Of Long Horizontal-Path Images Under Anisoplanatic Conditions Using Multiframe Blind Deconvolution, Glen E. Archer, Jeremy P. Bos, Michael Roggemann

Michigan Tech Publications, Part 1

All optical systems that operate in or through the atmosphere suffer from turbulence induced image blur. Both military and civilian surveillance, gun sighting, and target identification systems are interested in terrestrial imaging over very long horizontal paths, but atmospheric turbulence can blur the resulting images beyond usefulness. This work explores the mean square error (MSE) performance of a multiframe blind deconvolution (MFBD) technique applied under anisoplanatic conditions for both Gaussian and Poisson noise model assumptions. The technique is evaluated for use in reconstructing images of scenes corrupted by turbulence in long horizontal-path imaging scenarios. Performance is evaluated via the reconstruction …

The Size Range Of Bubbles That Produce Ash During Explosive Volcanic Eruptions, Kimberly Genareau, Gopal K. Mulukutla, Alexander A. Proussevitch, Adam J. Durant, William I. Rose, Dork L. Sahagian

Department of Geological and Mining Engineering and Sciences Publications

Volcanic eruptions can produce ash particles with a range of sizes and morphologies. Here we morphologically distinguish two textural types: Simple (generally smaller) ash particles, where the observable surface displays a single measureable bubble because there is at most one vesicle imprint preserved on each facet of the particle; and complex ash particles, which display multiple vesicle imprints on their surfaces for measurement and may contain complete, unfragmented vesicles in their interiors. Digital elevation models from stereo-scanning electron microscopic images of complex ash particles from the 14 October 1974 sub-Plinian eruption of Volcán Fuego, Guatemala and the 18 May 1980 …

Impact Of Aging Mechanism On Model Simulated Carbonaceous Aerosols, Y. Huang, S. Wu, M. K. Dubey, N. H.F. French

Michigan Tech Publications, Part 1

Carbonaceous aerosols including organic carbon and black carbon have significant implications for both climate and air quality. In the current global climate or chemical transport models, a fixed hydrophobic-to-hydrophilic conversion lifetime for carbonaceous aerosol (τ) is generally assumed, which is usually around one day. We have implemented a new detailed aging scheme for carbonaceous aerosols in a chemical transport model (GEOS-Chem) to account for both the chemical oxidation and the physical condensation-coagulation effects, where τ is affected by local atmospheric environment including atmospheric concentrations of water vapor, ozone, hydroxyl radical and sulfuric acid. The updated τ exhibits large spatial and …

Radar Measurements Of Nhtsa’S Surrogate Vehicle ‘Ss-V’, William Buller, Brian Wilson, James Ebling, Line Van Nieuwstadt, Benjamin E. Hart

Michigan Tech Research Institute Publications

NHTSA seeks to objectively quantify the performance of forward-looking advanced technologies such as Crash Imminent Braking (CIB) and Dynamic Brake Support (DBS) on the test track. Since these evaluations are expected to result in collisions between the subject vehicle (SV) and a principal other vehicle (POV) positioned directly in front of it, safety necessitates that the POV be a surrogate. However, to insure the tests will provide an accurate assessment of the SV’s CIB and/or DBS capabilities, the surrogate must present as realistic. One way “realism” must be quantified involves a surrogate’s radar return characteristics. The tests described in this …

Quantifying The Impact Of Boreal Forest Fires On Tropospheric Oxidants Over The Atlantic Using Aircraft And Satellites (Bortas) Experiment: Design, Execution And Science Overview, P. I. Palmer, M. Parrington, J. D. Lee, A. C. Lewis, A. R. Rickard, P. F. Bernath, T. J. Duck, D. L. Waugh, D. W. Tarasick, R. C. Owen, Et. Al.

Michigan Tech Publications, Part 1

We describe the design and execution of the BORTAS (Quantifying the impact of BOReal forest fires on Tropospheric oxidants over the Atlantic using Aircraft and Satellites) experiment, which has the overarching objective of understanding the chemical aging of air masses that contain the emission products from seasonal boreal wildfires and how these air masses subsequently impact downwind atmospheric composition. The central focus of the experiment was a two-week deployment of the UK BAe-146-301 Atmospheric Research Aircraft (ARA) over eastern Canada, based out of Halifax, Nova Scotia. Atmospheric ground-based and sonde measurements over Canada and the Azores associated with the planned …

Me-Em Enewsbrief, June 2013, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Micro-Jet Cooling Of Cutting Tools, Douglas J. Woodruff, Gary W. Pannala, William J. Endres, Nicole Barna, Quincy Schultz, David Thomasini, Matthew Zblewski

Michigan Tech Patents

A cutting tool includes an insert defining a flank face, a rake face, and a cutting edge between the flank face and rake face. The cutting tool includes micro-nozzles formed in at least one of the tool body and the insert, and aimed at the cutting edge. Each micro-nozzle generates a micro jet of cutting fluid in close proximity to the cutting edge and adjacent to at least one of the flank face and the rake face.

Me-Em Enewsbrief, March 2013, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Superior Analyzer For Raman Spectra With High Acceptance Cone, Resolution, Transmission, And Quantum Efficiency, And Strong Background Reduction, Manfred Fink, Philip Varghese, Jacek Borysow

Michigan Tech Patents

A Raman analyzer for analyzing light emitted from a Raman cell is provided that has a beam splitter configured to split the light emitted from the Raman cell into a first beam and a second beam. An atomic vapor filter can be used to filter a Raman scattered line from the first beam and a chopper system can periodically interrupt the first and second beams that are directed towards a photo detector, which can convert light from the first and second beams into an electrical signal. The signal output from the photo detector can optionally be amplified, digitized, Fourier filtered, …

Modeling Of 2008 Kasatochi Volcanic Sulfate Direct Radiative Forcing: Assimilation Of Omi So2 Plume Height Data And Comparison With Modis And Caliop Observations, J. Wang, S. Park, J. Zeng, C. Ge, K. Yang, S. Carn, N. Krotkov, A. H. Omar

Michigan Tech Publications, Part 1

Volcanic SO2 column amount and injection height retrieved from the Ozone Monitoring Instrument (OMI) with the Extended Iterative Spectral Fitting (EISF) technique are used to initialize a global chemistry transport model (GEOS-Chem) to simulate the atmospheric transport and lifecycle of volcanic SO2 and sulfate aerosol from the 2008 Kasatochi eruption, and to subsequently estimate the direct shortwave, top-of-the-atmosphere radiative forcing of the volcanic sulfate aerosol. Analysis shows that the integrated use of OMI SO2 plume height in GEOS-Chem yields: (a) good agreement of the temporal evolution of 3-D volcanic sulfate distributions between model simulations and satellite observations from the Moderate …

Validation Of The Fall3d Model For The 2008 Chaitén Eruption Using Field And Satellite Data, María Soledad Osores, Arnau Folch, Estela Collini, Gustavo Villarosa, Adam J. Durant, Gloria Pujol, José G. Viramonte

Michigan Tech Publications, Part 1

The 2008 Chaitén Volcano eruption began on 2 May 2008 with an explosive phase that injected large amounts of tephra into the atmosphere. During the first week of the eruption, volcanic ash clouds were transported for hundreds of kilometres over Argentina by the prevailing westerly winds. Tephra deposition extended to the Atlantic Ocean and severely affected the Argentinean Patagonia. Impacts included air and water quality degradation, disruption of ground transportation systems and cancellation of flights at airports more than 1,500 km apart. We use the FALL3D tephra transport model coupled with the Weather Research and Forecasting-Advanced Research Weather (WRF-ARW) meteorological …

2013 Civil And Environmental Engineering Department News, Department Of Civil And Environmental Engineering, Michigan Technological University

Department of Civil, Environmental, and Geospatial Engineering Newsletters

Table of Contents

• New Faculty
• Student Awards
• Research Awards
• Department News
• Academy of Civil and Environmental Engineers
• CEE Donor Recognition

A Scr Model Based On Reactor And Engine Experimental Studies For A Cu-Zeolite Catalyst, Xiaobo Song

Dissertations, Master's Theses and Master's Reports - Open

A NO_x reduction efficiency higher than 95% with NH₃ slip less than 30 ppm is desirable for heavy-duty diesel (HDD) engines using selective catalytic reduction (SCR) systems to meet the US EPA 2010 NO_x standard and the 2014-2018 fuel consumption regulation. The SCR performance needs to be improved through experimental and modeling studies. In this research, a high fidelity global kinetic 1-dimensional 2-site SCR model with mass transfer, heat transfer and global reaction mechanisms was developed for a Cu-zeolite catalyst. The model simulates the SCR performance for the engine exhaust conditions with NH₃ maldistribution and aging …

Development Of Vapor Deposited Silica Sol-Gel Particles For A Bioactive Materials System To Direct Osteoblast Behavior, Katherine Lynn Snyder

Dissertations, Master's Theses and Master's Reports - Open

Tissue engineering and regenerative medicine have emerged in an effort to generate replacement tissues capable of restoring native tissue structure and function, but because of the complexity of biologic system, this has proven to be much harder than originally anticipated. Silica based bioactive glasses are popular as biomaterials because of their ability to enhance osteogenesis and angiogenesis. Sol-gel processing methods are popular in generating these materials because it offers: 1) mild processing conditions; 2) easily controlled structure and composition; 3) the ability to incorporate biological molecules; and 4) inherent biocompatibility. The goal of this work was to develop a bioactive …

Performance-Based Engineering Framework For Earthquake And Fire Following Earthquake, Aerik Carlton

Dissertations, Master's Theses and Master's Reports - Open

The objective for this thesis is to outline a Performance-Based Engineering (PBE) framework to address the multiple hazards of Earthquake (EQ) and subsequent Fire Following Earthquake (FFE). Currently, fire codes for the United States are largely empirical and prescriptive in nature. The reliance on prescriptive requirements makes quantifying sustained damage due to fire difficult. Additionally, the empirical standards have resulted from individual member or individual assembly furnace testing, which have been shown to differ greatly from full structural system behavior. The very nature of fire behavior (ignition, growth, suppression, and spread) is fundamentally difficult to quantify due to the inherent …

Co-Electrophoretic Deposition Of Liquid Metal And Silicon For Lithium-Ion Battery Application, Hanfei Zhang

Dissertations, Master's Theses and Master's Reports - Open

A low cost electrophoretic deposition (EPD) process was successfully used for liquid metal thin film deposition with a high depositing rate of 0.6 µ/min. Furthermore, silicon nano-powder and liquid metal were then simultaneously deposited as the negative electrode of lithium-ion battery by a technology called co-EPD. The liquid metal was hoping to act as the matrix for silicon particles during lithium ion insertion and distraction. Half-cell testing was performed using as prepared co-EPD sample. An initial discharge capacity of 1500 mAh/g was reported for nano-silicon and galinstan electrode, although the capacity fading issue of these samples was also observed.

Experimental Investigation Of Regular Fluids And Nanofluids During Flow Boiling In A Single Microchannel At Different Heat Fluxes And Mass Fluxes, Zachary Edel

Dissertations, Master's Theses and Master's Reports - Open

The dissipation of high heat flux from integrated circuit chips and the maintenance of acceptable junction temperatures in high powered electronics require advanced cooling technologies. One such technology is two-phase cooling in microchannels under confined flow boiling conditions. In macroscale flow boiling bubbles will nucleate on the channel walls, grow, and depart from the surface. In microscale flow boiling bubbles can fill the channel diameter before the liquid drag force has a chance to sweep them off the channel wall. As a confined bubble elongates in a microchannel, it traps thin liquid films between the heated wall and the vapor …

Synthesis Of Graphene And Its Applications For Dye-Sensitized Solar Cells, Hui Wang

Dissertations, Master's Theses and Master's Reports - Open

Graphene, which is a two-dimensional carbon material, exhibits unique properties that promise its potential applications in photovoltaic devices. Dye-sensitized solar cell (DSSC) is a representative of the third generation photovoltaic devices. Therefore, it is important to synthesize graphene with special structures, which possess excellent properties for dye-sensitized solar cells.

This dissertation research was focused on (1) the effect of oxygen content on the structure of graphite oxide, (2) the stability of graphene oxide solution, (3) the application of graphene precipitate from graphene oxide solution as counter electrode for DSSCs, (4) the development of a novel synthesis method for the three-dimensional …

Development Of A 2-Dimensional Finite Volume Model To Assess Hydrodynamic And Microbial Controls On Dnapl Dissolution And Detoxification, Eric S. Wesseldyke

Dissertations, Master's Theses and Master's Reports - Open

Tetrachloroethene (PCE) and trichloroethene (TCE) form dense non-aqueous phase liquids (DNAPLs), which are persistent groundwater contaminants. DNAPL dissolution can be "bioenhanced" via dissolved contaminant biodegradation at the DNAPL-water interface. This research hypothesized that: (1) competitive interactions between different dehalorespiring strains can significantly impact the bioenhancement effect, and extent of PCE dechlorination; and (2) hydrodynamics will affect the outcome of competition and the potential for bioenhancement and detoxification. A two-dimensional coupled flowtransport model was developed, with a DNAPL pool source and multiple microbial species. In the scenario presented, Dehalococcoides mccartyi 195 competes with Desulfuromonas michiganensis for the electron acceptors PCE and …

Thermal Characterization Of A Gasoline Turbocharged Direct Injection (Gtdi) Engine Utilizing Lean Operation And Exhaust Gas Recirculation (Egr), Daniel P. Madison

Dissertations, Master's Theses and Master's Reports - Open

The push for improved fuel economy and reduced emissions has led to great achievements in engine performance and control. These achievements have increased the efficiency and power density of gasoline engines dramatically in the last two decades. With the added power density, thermal management of the engine has become increasingly important. Therefore it is critical to have accurate temperature and heat transfer models as well as data to validate them. With the recent adoption of the 2025 Corporate Average Fuel Economy(CAFE) standard, there has been a push to improve the thermal efficiency of internal combustion engines even further. Lean and …

Undergraduate Education 2013, College Of Engineering, Michigan Technological University

Michigan Tech Engineering Magazine

Table of Contents

• College Facts
• Student News
• College News
• Faculty News

Engineering Research 2013, College Of Engineering, Michigan Technological University

Michigan Tech Engineering Magazine

Table of Contents

• Energy
• Earth, Air & Water
• Engineered Materials
• Health
• Research Centers
• Innovation
• Graduate Research & Education

Me-Em 2012-13 Annual Report, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering Annual Reports

Table of Contents

• Research Centers
• Students
• Faculty & Staff
• Alumni
• Contracts & Grants
• Publications

Modeling And Hardware-In-The-Loop Simulation Of Power-Split Hybrid Electric Vehicles, Shreyash Joshi

Dissertations, Master's Theses and Master's Reports - Open

Conventional vehicles are creating pollution problems, global warming and the extinction of high density fuels. To address these problems, automotive companies and universities are researching on hybrid electric vehicles where two different power devices are used to propel a vehicle. This research studies the development and testing of a dynamic model for Prius 2010 Hybrid Synergy Drive (HSD), a power-split device. The device was modeled and integrated with a hybrid vehicle model. To add an electric only mode for vehicle propulsion, the hybrid synergy drive was modified by adding a clutch to carrier 1. The performance of the integrated vehicle …

Multiscale Modeling Of Liquid Crystalline/Nanotube Composites, Sharil Patrale

Dissertations, Master's Theses and Master's Reports - Open

The objective of this research is to synthesize structural composites designed with particular areas defined with custom modulus, strength and toughness values in order to improve the overall mechanical behavior of the composite. Such composites are defined and referred to as 3D-designer composites. These composites will be formed from liquid crystalline polymers and carbon nanotubes. The fabrication process is a variation of rapid prototyping process, which is a layered, additive-manufacturing approach. Composites formed using this process can be custom designed by apt modeling methods for superior performance in advanced applications. The focus of this research is on enhancement of Young's …

Characterization Of Porous Media In Proton Exchange Membrane Fuel Cell Based On Percolation Studies, Stephen Stacy

Dissertations, Master's Theses and Master's Reports - Open

Water management in the porous media of proton exchange membrane (PEM) fuel cells, catalyst layer and porous transport layers (PTL) is confronted by two issues, flooding and dry out, both of which result in improper functioning of the fuel cell and lead to poor performance and degradation.

The data that has been reported about water percolation and wettability within a fuel cell catalyst layer is limited to porosimetry. A new method and apparatus for measuring the percolation pressure in the catalyst layer has been developed. The experimental setup is similar to a Hele-Shaw experiment where samples are compressed and a …

Evaluation Of Non-Stationarity In Annual Maximum Flood Series Of Moderately Impaired Watersheds In The Upper Midwest And Northeastern United States, Neila Salvadori

Dissertations, Master's Theses and Master's Reports - Open

United States federal agencies assess flood risk using Bulletin 17B procedures which assume annual maximum flood series are stationary. This represents a significant limitation of current flood frequency models as the flood distribution is thereby assumed to be unaffected by trends or periodicity of atmospheric/climatic variables and/or anthropogenic activities. The validity of this assumption is at the core of this thesis, which aims to improve understanding of the forms and potential causes of non-stationarity in flood series for moderately impaired watersheds in the Upper Midwest and Northeastern US. Prior studies investigated non-stationarity in flood series for unimpaired watersheds; however, as …

Post-Project Assessment Of Pit Latrines In Rural Panama, Jacob B. Midkiff

Dissertations, Master's Theses and Master's Reports - Open

In Panama, one of the Environmental Health (EH) Sector’s primary goals is to improve the health of rural Panamanians by helping them to adopt behaviors and practices that improve access to and use of sanitation systems. In complying with this goal, the EH sector has used participatory development models to improve hygiene and increase access to latrines through volunteer managed latrine construction projects. Unfortunately, there is little understanding of the long term sustainability of these interventions after the volunteers have completed their service. With the Peace Corps adapting their Monitoring, Reporting, and Evaluation procedures, it is appropriate to evaluate the …