Engineering Commons^™

Enhancing The Resolution Of Imaging Systems By Spatial Spectrum Manipulation, Wyatt Adams

Dissertations, Master's Theses and Master's Reports

Much research effort has been spent in the 21st century on superresolution imaging techniques, methods which can beat the diffraction limit. Subwavelength composite structures called ``metamaterials" had initially shown great promise in superresolution imaging applications in the early 2000s, owing to their potential for nearly arbitrary capabilities in controlling light. However, for optical frequencies they are often plagued by absorption and scattering losses which can decay or destroy their interesting properties. Similar issues limit the application of other superresolution devices operating as effective media, or metal films that can transfer waves with large momentum by supporting surface plasmon polaritons. In …

Modeling And Control Of Maximum Pressure Rise Rate In Rcci Engines, Aditya Basina

Dissertations, Master's Theses and Master's Reports

Low Temperature Combustion (LTC) is a combustion strategy that burns fuel at lower temperatures and leaner mixtures in order to achieve high efficiency and near zero NOx emissions. Since the combustion happens at lower temperatures it inhibits the formation of NOx and soot emissions. One such strategy is Reactivity Controlled Compression Ignition (RCCI). One characteristic of RCCI combustion and LTC com- bustion in general is short burn durations which leads to high Pressure Rise Rates (PRR). This limits the operation of these engines to lower loads as at high loads, the Maximum Pressure Rise Rate (MPRR) hinders the use of …

Modeling Of Thermal Dynamics In Chevrolet Volt Gen Ii Hybrid Electric Vehicle For Integrated Powertrain And Hvac Optimal Operation Through Connectivity, Nehal Doshi

Dissertations, Master's Theses and Master's Reports

Integrated thermal energy management across system level components in electric vehicles (EVs) and hybrid electric vehicles (HEVs) is currently an under explored space. The proliferation of connected vehicles and accompanying infrastructure in recent years provides additional motivation to explore opportunities in optimizing thermal energy management in EVs and HEVs with the help of this newly available connected vehicle data. This thesis aims to examine and analyze the potential to mitigate vehicle energy consumption and extend usable driving range through optimal control strategies which exploit physical system dynamics via controls integration of vehicle subsystems.

In this study, data-driven and physics-based models …

Electro-Optic Antenna Elements For Passive Phased Array Radar, Evan Gawron

Dissertations, Master's Theses and Master's Reports

Passive phased antenna arrays are utilized in military and civilian radar systems to determine the received signal origination. Phased array placement for optimal reception is challenging due to the required supporting electronic hardware and the associated coaxial cabling that typically accompanies each antenna channel. Low noise amplifiers and frequency conversion hardware add size and complexity, limiting possible positions for phased array placement. Eliminating required phased array electronic subcomponents without sacrificing function would allow placement onto smaller agile platforms, such as unmanned systems and rapid deployment networks. Electro-optic (EO) antenna elements utilize an optical waveguide embedded between the antenna and ground …

Development Of A 2d Scr Catalyst On A Diesel Particulate Filter Model For Design And Control Applications To A Ultra Low Nox Aftertreatment System, Venkata Chundru

Dissertations, Master's Theses and Master's Reports

This research focuses on modeling and control of PM and NO_x in diesel engine exhaust using an SCR catalyst on a Diesel Particulate Filter (SCR-F). A 2D SCR-F model was developed that is capable of predicting internal states: 2D temperature, PM and NH₃storage distributions and filtration efficiency, pressure drop, PM mass retained in the PM cake and substrate wall and outlet NO, NO₂and NH₃concentrations. The SCR-F model was used to simulate a DOC + SCR-F + DOC + SCR ultra-low NOx system that can achieve > 99.5% NOx conversion efficiency.

The model was calibrated …

Estimation Of Multi-Directional Ankle Impedance As A Function Of Lower Extremity Muscle Activation, Lauren Knop

Dissertations, Master's Theses and Master's Reports

The purpose of this research is to investigate the relationship between the mechanical impedance of the human ankle and the corresponding lower extremity muscle activity. Three experimental studies were performed to measure the ankle impedance about multiple degrees of freedom (DOF), while the ankle was subjected to different loading conditions and different levels of muscle activity. The first study determined the non-loaded ankle impedance in the sagittal, frontal, and transverse anatomical planes while the ankle was suspended above the ground. The subjects actively co-contracted their agonist and antagonistic muscles to various levels, measured using electromyography (EMG). An Artificial Neural Network …

Networked Microgrid Optimization And Energy Management, Robert S. Jane

Dissertations, Master's Theses and Master's Reports

Military vehicles possess attributes consistent with a microgrid, containing electrical energy generation, storage, government furnished equipment (GFE), and the ability to share these capabilities via interconnection. Many military vehicles have significant energy storage capacity to satisfy silent watch requirements, making them particularly well-suited to share their energy storage capabilities with stationary microgrids for more efficient energy management. Further, the energy generation capacity and the fuel consumption rate of the vehicles are comparable to standard diesel generators, for certain scenarios, the use of the vehicles could result in more efficient operation. Energy management of a microgrid is an open area of …

Magnetic Domain Structures In Fe-Ga Alloys, Matthew N. Tianen

Dissertations, Master's Theses and Master's Reports

Fe-Ga alloys, also referred to as Galfenol, have attracted great attention as new giant magnetostrictive materials for over fifteen years. They exhibit large magnetostriction, small hysteresis, good machinability, and high tensile strength, providing many advantages over other functional materials like magnetostrictive Terfenol-D, piezoelectric PZT, and magnetic shape memory Ni-Mn-Ga. In spite of the intense interest in Fe-Ga alloys, the domain phenomena that underlie their properties and functionalities are less known. Using the Bitter method, a systematic study of magnetic domain structures in Fe-Ga single crystals of different compositions and heat treatments has been performed. Our domain observation experiments reveal numerous …

A Smart Implantable Bone Fixation Plate Providing Actuation And Load Monitoring For Orthopedic Fracture Healing, Brad Nelson

Dissertations, Master's Theses and Master's Reports

Fracture non-union occurs in roughly 5-10% of all fracture cases, and current interventions are both time-consuming and costly. There is therefore significant incentive to develop new tools to improve fracture healing outcomes. Several studies have shown that low-magnitude, high-frequency (LMHF) mechanical loading can promote faster healing and reduce the risk of refracture in critical-size long bone fractures. This is typically done using whole-body vibration, which may result in undesirable systemic effects on the rest of the body. This work discusses an implantable piezoelectric fixation plate that can both apply LMHF loading directly to the fracture site using flexible scheduling and …

Acoustic Localization Techniques For Application In Near-Shore Arctic Environments, Miles B. Penhale

Dissertations, Master's Theses and Master's Reports

The Arctic environment has undergone significant change in recent years. Multi-year ice is no longer prevalent in the Arctic. Instead, Arctic ice melts during summer months and re-freezes each winter. First-year ice, in comparison to multi-year ice, is different in terms of its acoustic properties. Therefore, acoustic propagation models of the Arctic may no longer be valid. The open water in the Arctic for longer time periods during the year invites anthropogenic traffic such as civilian tourism, industrial shipping, natural resource exploration, and military exercises. It is important to understand sound propagation in the first-year ice environment, especially in near-shore …

Effect Of Development Of Scandium Trialuminide Precipitates On Corrosion And Mechanical Behavior In Aluminum-Magnesium Alloys, Carson Williams

Dissertations, Master's Theses and Master's Reports

Development of aluminum alloys has seen an increase in attention in recent years. The 5xxx series of Al-Mg alloys has the potential to provide strong, lightweight materials in various industry applications, however issues with strain formability and corrosion hinder the development of these alloys. The addition of Sc for developing Al₃Sc precipitates provides considerable precipitation strengthening as well as grain refinement characteristics that can help mitigate these issues. Alloys with varied Mg content were analyzed for heat treatment aging responses and precipitate formation, changes in mechanical behavior related to the Portevin-le Chatelier effect, and effects on intergranular corrosion …

Investigating Microalloying Elements To Accelerate Zirconium Trialuminide Precipitation In Aluminum Alloys, Philip D. Staublin

Dissertations, Master's Theses and Master's Reports

Precipitation of the L1₂-structured coherent Al₃Zr trialuminide phase in aluminum-zirconium alloys increases the alloy strength. Precipitation of a more refined dispersion of Al₃Zr can further increase the strength of these alloys. The addition of microalloying elements which bind to zirconium may accelerate the precipitation kinetics, allowing for nucleation of a greater number of precipitates and faster precipitate growth. Zirconium binding energies are computed for a wide range of elements, based on which the elements tin, antimony, and tellurium were selected for investigation. Ternary Al-Zr-X alloys (X = Sn, Sb, Te) were cast and heat …

Hydrologic Impacts And Trade-Offs Associated With Forest-Based Bioenergy Development Across The Americas, Azad Heidari

Dissertations, Master's Theses and Master's Reports

A simulation-based framework for studying hydrologic impacts and associated tradeoffs for existing and proposed biofuel projects in the US (poplar), Argentina (eucalyptus) and Mexico (oil palm) is developed. For each case study, a representative watershed is selected and a SWAT model is set up and calibrated for an improved simulation of hydrologic processes and plant growth cycles. Potential bioenergy scenarios are developed that represent various planting densities, harvest cycles, fertilization and irrigation rates, land cover types being converted, slope, and locations across the watershed.

Simulations indicate that growth and biomass production are significantly dependent on nitrogen availability, making fertilization a …

Online Learning Of The Spatial-Temporal Channel Variation In Underwater Acoustic Communication Networks, Wensheng Sun

Dissertations, Master's Theses and Master's Reports

Influenced by environmental conditions, underwater acoustic (UWA) communication channels exhibit spatial and temporal variations, posing significant challenges for UWA networking and applications. This dissertation develops statistical signal processing approaches to model and predict variations of the channel and relevant environmental factors. Firstly, extensive field experiments are conducted in the Great Lakes region. Three types of the freshwater river/lake acoustic channels are characterized in the aspects of statistical channel variations and sound propagation loss, including stationary, mobile and under-ice acoustic channels. Statistical data analysis shows that relative to oceanic channels, freshwater river/lake channels have larger temporal coherence, higher correlation among densely …

Design And Development Of Personal Protective Equipment Products To Reduce The Impacts Of Machete Injuries For Indigenous Ngäbe Subsistence Farmers In Bocas Del Toro, Panama, Micah Koller

Dissertations, Master's Theses and Master's Reports

Design and development of personal protective equipment products for workers using machetes (MPPE) is considered in the specific context of indigenous Ngäbe subsistence farmers in a small, rural community in Bocas del Toro, Panama where the author spent two years as a Peace Corps volunteer from 2017-2019. People in this community regularly suffer significant health and economic impacts due to accidents with machetes, which are essential tools in their farm work and daily lives. The history, criticisms, and recent frameworks related to product design and development in resource-poor markets is examined, and specific details of the problem of machete injuries …

3d Printing In Low Resource Healthcare Settings: Analysis Of Potential Implementations, Alenna Beroza

Dissertations, Master's Theses and Master's Reports

3D printing has gained significant momentum in the past ten years, and its unique advantages make it especially ideal for use in low resource healthcare settings, where many designs have already been successfully implemented. Yet, little has been studied on how 3D printing can be sustainably and functionally implemented in low resource healthcare systems as a manufacturing practice. In this report, three business models are proposed for this implementation: In-House Operator, Independent Operator, and Print Farm. These models were then tested over four months in Kisumu county, Kenya, at two workshops and seven public hospitals. I worked with local medical …

Crack Pattern Simulation Of Pressurized Borosilicate Glass Tube Under Pellet Impact Using Ale Method, Omkar Bhumkar

Dissertations, Master's Theses and Master's Reports

Transformer bushings are a common target for sniper attacks to cause power failure in large areas. Given the size, internal pressure and brittle nature of transformer bushing, pellet impact causes damage to surrounding components due to broken bushing pieces. To mitigate this, a project was initiated by United States Burau of Reclaimation to develop a safety mechanism. Finite Element Analysis is proposed to optimize and reduce cost of the design.

A simplified Finite Element model is created which consists of 0.22 caliber lead pellet impacting Pyrex 7740 borosilicate glass tube. Previous studies on the effect of the mesh pattern, size …

Degradable Zinc Material Characteristics And Its Influence On Biocompatibility In An In-Vivo Murine Model, Roger J. Guillory Ii

Dissertations, Master's Theses and Master's Reports

Biodegradable stents based on zinc have been under development since their introduction in 2013. While metallic zinc is highly ductile, it unfortunately lacks the mechanical strength required for arterial stents. This has led to the development of an abundance of novel zinc-based materials, with the aim of improving the mechanical strength without sacrificing too much ductility. Although these materials are intended to function and slowly degrade within an artery, most zinc-based materials have been developed without deep consideration for their biological effects.

The present work explores the biological effects elicited by zinc-based materials implanted within the arterial system. The biological …

Assessing Benthic Recovery In The Torch Lake Aoc, Anya Clare Leach

Dissertations, Master's Theses and Master's Reports

Torch Lake, located in Michigan’s Upper Peninsula, was a site of copper ore processing from the 1860s through the 1960s. During this time, various mining by-products were deposited into the lake and along its shoreline, including mine tailings and associated heavy metals contaminants (e.g., copper). It was anticipated that natural sediment deposition would cover and attenuate toxic sediments over time, but a comprehensive assessment of the benthos has not been performed since a baseline survey conducted in 1999 and 2000. This study was conducted in 2018 to evaluate the current benthic community status as well as sediment composition and metal …

Experimental Study Of Low Cycle Fatigue Properties For Epoxy Resins With Dibutyl Phthalate (Dbp), Zhi Wang, Jiajia Zhou, Lianjian Song, Long Li

Department of Civil, Environmental, and Geospatial Engineering Publications

In order to improve the toughness of traditional epoxy resin, dibutyl phthalate (DBP) was introduced into the epoxy resin. The static mechanical performance of plasticized and unplasticized epoxy resin was evaluated. The test results showed that the DBP modified epoxy resin can obtain a higher toughness than conventional epoxy resin, but the elastic modulus and the tensile strength were slightly reduced. The low cycle fatigue test results indicated that the stress ratio and the stress level were two critical factors of fatigue life, which was increased with the growth of stress ratio. It was also found that the fatigue life …

Dynamic Response Analysis Of Rutting Resistance Performance Of High Modulus Asphalt Concrete Pavement, Chundi Si, Enli Chen, Zhanping You, Riulan Tian, Ran Zhang, Junfeng Gao

Department of Civil, Environmental, and Geospatial Engineering Publications

In order to systematically study the rutting resistance performance of High-Modulus Asphalt Concrete (HMAC) pavements, a finite element method model of HMAC pavement was established using ABAQUS software. Based on the viscoelasticity theory of asphalt, the stress and deformation distribution characteristics of HMAC pavement were studied and compared to conventional asphalt pavement under moving loads. Then, the pavement temperature field model was established to study the temperature variation and the thermal stress in HMAC pavement. Finally, under the condition of continuous temperature variation, the creep behavior and permanent deformation of HMAC pavement were investigated. The results showed that under the …

Monitoring The Impact Of Groundwater Pumping On Infrastructure Using Geographic Information System (Gis) And Persistent Scatterer Interferometry (Psi), Kirsten Deprekel, El Hachemi Bouali, Thomas Oommen

Department of Geological and Mining Engineering and Sciences Publications

Transportation infrastructure is critical for the advancement of society. Bridges are vital for an efficient transportation network. Bridges across the world undergo variable deformation/displacement due to the Earth’s dynamic processes. This displacement is caused by ground motion, which occurs from many natural and anthropogenic events. Events causing deformation include temperature fluctuation, subsidence, landslides, earthquakes, water/sea level variation, subsurface resource extraction, etc. Continual deformation may cause bridge failure, putting civilians at risk, if not managed properly. Monitoring bridge displacement, large and small, provides evidence of the state and health of the bridge. Traditionally, bridge monitoring has been executed through on-site surveys. …

Enhanced Anticancer Activity Of 5'-Dfur-Pcl-Mpeg Polymeric Prodrug Micelles Encapsulating Chemotherapeutic Drugs, Alicia J. Sawdon, Jun Zhang, Xutu Wang, Ching-An Peng

Department of Chemical Engineering Publications

The compound 5’-deoxy-5-fluorouridine (5’-DFUR) is a prodrug of the anti-tumor drug 5-fluorouracil (5-FU). Thymidine phosphorylase (TP) is an enzyme that can convert 5’-DFUR to its active form 5-FU and the expression of TP is upregulated in various cancer cells. In this study, 5’-DFUR associated with amphiphilic copolymer poly(ε-caprolactone)-methoxy poly(ethylene glycol) (5’-DFUR-PCL-MPEG) was synthesized, characterized, and self-assembled into functional polymeric micelles. To demonstrate that the prodrug 5’-DFUR could convert into cytotoxic 5-fluorouracil (5-FU) by endogenous TP, HT-29 colorectal cancer cells were treated with 5’-DFUR-PCL-MPEG polymeric micelles for various time periods. Chemotherapeutic drugs doxorubicin (DOX) and 7-ethyl-10-hydroxycamptothecin (SN-38) were also encapsulated separately …

Economic Potential For Distributed Manufacturing Of Adaptive Aids For Arthritis Patients N The U.S., Nicole Gallup, Jennifer Bow, Joshua M. Pearce

Department of Materials Science and Engineering Publications

By 2040, more than a quarter of the U.S. population will have diagnosed arthritic conditions. Adults with arthritis and other rheumatic conditions earn less than average yet have medical care expenditures that are over 12% of average household income. Adaptive aids can help arthritis patients continue to maintain independence and quality of life; however, their high costs limit accessibility for older people and the poor. One method used for consumer price reduction is distributed manufacturing with 3-D printers. In order to assess if such a method would be financially beneficial, this study evaluates the techno-economic viability of distributed manufacturing of …

Revisiting The Paleomagnetism Of The Neoarchean Uauá Mafic Dyke Swarm, Brazil: Implications For Archean Supercratons, J. Salminen, E. P. Oliveira, Elisa J. Piispa, Aleksey Smirnov, R. I. F. Trindade

Michigan Tech Publications, Part 1

The original connections of Archean cratons are becoming traceable due to an increasing amount of paleomagnetic data and refined magmatic barcodes. The Uauá block of the northern São Francisco craton may represent a fragment of a major Archean craton. Here, we report new paleomagnetic data from the 2.62 Ga Uauá tholeiitic mafic dyke swarm of the Uauá block in the northern São Francisco craton, Eastern Brazil. Our paleomagnetic results confirm the earlier results for these units, but our interpretation differs. We suggest that the obtained characteristic remanent magnetization for the 2.62 Ga swarm is of primary origin, supported by a …

Effective Exploitation Potential Of Shale Gas From Lower Cambrian Niutitang Formation, Northwestern Hunan, China, Han Cao, Tianyi Wang, Ting Bao, Pinghe Sun, Zheng Zhang, Jingjing Wu

Michigan Tech Publications, Part 1

The marine shale in the Lower Cambrian Niutitang Formation is the dominant shale-gas reservoir in northwestern Hunan, which accounts for more than 70% of unconventional energy in Hunan province. Accurately evaluating the shale-gas exploitation potential is a key to determining whether commercial exploitation standards can be met. In the literature, most existing studies have focused on evaluating the shale-gas exploitation potential based on either accumulation conditions or the shale fracability, which will lead to a gap between the real production and proven gas reserves due to the characteristics of the shale’s low permeability and low porosity. Therefore, further studies are …

Nondestructive Assessment Of Wood Members In A Viewing Tower In Potawatomi State Park, Door County, Wisconsin, Us, Robert Ross, Xiping Wang, C. Adam Senalik

College of Forest Resources and Environmental Science Publications

The State of Wisconsin’s Department of Natural Resources is responsible for operating one of the largest state park systems in the United States. Potawatomi State Park, located on the Door County peninsula, consists of about 1,200 acres of flat to gently rolling upland terrain bordered by steep slopes and rugged limestone cliffs along Lake Michigan’s shoreline. A 75-ft observation tower sits atop a 150-ft bluff overlooking Lake Michigan. The USDA Forest Service, Forest Products Laboratory, was asked to conduct an assessment of the main support timbers of the tower. This report summarizes the results obtained from the inspection and assessment. …

Me-Em Enewsbrief, December 2018, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

3-D Printable Polymer Pelletizer Chopper For Fused Granular Fabrication-Based Additive Manufacturing, Aubrey Woern, Joshua M. Pearce

Department of Materials Science and Engineering Publications

Although distributed additive manufacturing can provide high returns on investment, the current markup on commercial filament over base polymers limits deployment. These cost barriers can be surmounted by eliminating the entire process of fusing filament by three-dimensional (3-D) printing products directly from polymer granules. Fused granular fabrication (FGF) (or fused particle fabrication (FPF)) is being held back in part by the accessibility of low-cost pelletizers and choppers. An open-source 3-D printable invention disclosed here allows for precisely controlled pelletizing of both single thermopolymers as well as composites for 3-D printing. The system is designed, built, and tested for its ability …

Investigative Study On Nitric Oxide Production In Human Dermal Fibroblast Cells Under Normal And High Glucose Conditions, Maria Paula Kwesiga, Emily Cook, Jennifer Hannon, Sarah Wayward, Caroline Gwaltney, Smitha Rao, Megan C. Frost

Michigan Tech Publications, Part 1

Diabetic foot ulcers (DFU) are a major health problem associated with diabetes mellitus. Impaired nitric oxide (NO) production has been shown to be a major contributor to the dysregulation of healing in DFU. The level of impairment is not known primarily due to challenges with measuring NO. Herein, we report the actual level of NO produced by human dermal fibroblasts cultured under normal and high glucose conditions. Fibroblasts produce the extracellular matrix, which facilitate the migration of keratinocytes to close wounds. The results show that NO production was significantly higher in normal glucose compared to high glucose conditions. The real-time …