Engineering Commons^™

Pg&E Flow Loop Simulator, Cole Brooks, Seth Berger, Ben Thacker

Mechanical Engineering

PG&E’s Diablo Canyon Power Plant requested a full-sized Flow Loop Simulator to train technicians by giving them hands-on experience. The basic design requirements were established to determine the scope of the project and develop the specific characteristics of the system. The detailed system design is composed of a piping schematic, a three-dimensional layout of the system components and piping, and a skid structure for the support and transportation of the system. Heat transfer and fluid mechanics were used to analyze the system to size components.

Flow Loop Simulator, Tyler Ista, Kevin Rehm, Matt Starbuck

Mechanical Engineering

PG&E’s Diablo Canyon Power Plant has requested a full-sized flow process system for training of technicians by providing them a hands-on experience in a controlled environment. The basic design requirements were established to determine the scope of the project. An initial system layout was selected from a variety of concepts after similar system schematics, components, and processes had been researched. The resulting schematic was flexible to suit several needs of the control aspect while remaining simple.

Design efforts resulted in a system capable of many configurations; allowing for implementation of three training experiments. These experiments involve control of tank level …

Tk Ripper, Charles Volk, Vincent Priolo, Zachary Mckibbin

Mechanical Engineering

The TK Ripper was designed to pull a rider on a wakeboard up from a deep water start. We believe the force and power required to pull a rider on a wakeboard out of the water provides enough force and power for many other extreme sports.

Supermileage Seat And Wheel Development And Production: Final Report, James Casey Alvernaz, Verent Chan, Brian Hamstrom, David Lewis, James Sciaini

Mechanical Engineering

This report documents the design and manufacturing efforts of the Cal Poly senior project team Central Coast Composites. It details the design, analysis and manufacturing of a composite seat and wheels for the Cal Poly Supermileage team. It further outlines suggestions for future efforts to manufacture composite wheels for Cal Poly Supermileage team's Urban Concept Vehicle.

Traversing Probe Assembly, Josh Bugni, Andrew Sofranko

Mechanical Engineering

No abstract provided.

Nexys 2 Slot Machine, Mark Luna

Computer Engineering

No abstract provided.

Ultrasonic Shark-Tag Locator System For Iver2 Auv, Nathaniel Garcia

Computer Engineering

The purpose of this project is to develop a system for tracking an ultrasonic underwater transmitter that can be integrated into an IVER2 AUV to allow it to follow and monitor tagged sharks in the ocean for scientific research.

The system consists of a four main components including a shark-tag, two hydrophones, a filter/amplifier & threshold detector circuit, and a microcontroller.

This project, while not completing field testing and integration with the IVER2, is a proof of concept of a system that utilizes passive sonar to determine a bearing from the system to a shark-tag transmitter. Additionally, it devised several …

A Low Power Touch Screen Document Viewer, Chris Perfetto

Computer Engineering

This document will cover the requirements, design, implementation and testing of a low power touch screen document viewer to serve as a replacement bulletin board. It was Implemented using a BeagleBoard development board, a 4.3” touchscreen LCD and a SD card with a Ubuntu Linux OS installed. The testing of this device is primarily testing the power consumption. The device is not yet complete and will require further development for it to completely satisfy the requirements.

Max Flow Spill Code Placement Algorithm Implemented In Gcc 4.4.3, Stephen Robert Beard

Computer Engineering

The placement of spill code plays an important role in the register allocator of an optimizing compiler. Many computer architectures possess a register linkage convention that dictates which registers are preserved across function calls and which are not. This project addresses the problem of optimizing spill code that is associated with register linkage conventions.

This algorithm was created by Dr. Chris Lupo and is described in the paper Beyond Register Allocation: a Novel Algorithm for Spill-Code Placement. The algorithm was implemented for GCC 2.5.7 for a PA-RISC architecture [4]. The work in this project will involve porting the existing code …

Characterization Of The Rfx400 For Use In Software Defined Radio, Edward Adams

Computer Engineering

While software defined radio is an extremely flexible technology that is fairly rarely used, as a single purpose radio is much cheaper, it provides an excellent means of learning RF and communications skills through the lens of digital electronics, and it would behoove a Cal Poly student interested in these areas to take on a project in software defined radio. This project aims to lower the barrier to entry for future students to undertake such a project. The use of an up-converter/down-converter is documented for future students to interface with.

Rfid Asset Tracking And Digital Check-Out System, Jeffrey (Jeff) Migliore

Computer Engineering

An asset tracking and digital check-out system was developed using Radio Frequency Identification (RFID) and a Single Board Computer (SBC). A RFID reader was used as a check point to process transactions. The RFID reader was attached to the SBC via USB. The SBC is integrated into a network via Ethernet and hosts a web graphical user interface (GUI) frontend for users to view transactions and query availability of assets. A MYSQL database was used for the backend storage of data.

Specifically, this system was designed to track tool assets. Many modern companies have employees sharing limited resources. The common …

Household Outlet Monitoring And Control System, Michael Young

Computer Engineering

No abstract provided.

Wii-Mote Head Tracking: A Three Dimensional Virtual Reality Display, David Fairman

Computer Engineering

The goal of this project is to create a customizable three dimensional virtual reality display on a system available to any non-technical user. This System will use the infrared camera component of a standard Nintendo Wii-mote to track a user's head motions in all six major directions. The virtual reality will be a customizable image projected onto a screen or simply shown on a computer or TV monitor. In order to appear 3-dimensional, the image will continually change according to the position of the user's head. As the user moves their head to the left and right, portions of the …

Lavers Ranch Vineyard Design, A.J. Borba

BioResource and Agricultural Engineering

This senior project discusses the design of a vineyard irrigation system for Lavers Ranch in Glennville, Ca. The vineyard is 33 acres in the foothills of the Sierra Nevada Mountains and water will be provided for the system by three springs located on the ranch. This senior project discusses vineyard layout: vine direction, vine spacing, and emitters per vine. Using Microsoft Excel, a program will be developed that will give irrigation requirements for the conditions given by Lavers Ranch. Along with the Excel program final maps will be included with detailed information of the field requirements.

Distributed Generation: Issues Concerning A Changing Power Grid Paradigm, Scott G.M. Therien

Master's Theses

Distributed generation is becoming increasingly prevalent on power grids around the world. Conventional designs and grid operations are not always sufficient for handling the implementation of distributed generation units; the new generation may result in undesirable operating conditions, or system failure. This paper investigates the primary issues involved with the implementation of distributed generation and maintaining the integrity of the power grid. The issues addressed include power flow, system protections, voltage regulation, intermittency, harmonics, and islanding. A case study is also presented to illustrate how these issues can be addressed when designing distributed generation installation on an existent distribution system. …

Enhanced Light Extraction Efficiency From Gan Light Emitting Diodes Using Photonic Crystal Grating Structures, Simeon S. Trieu

Master's Theses

Gallium nitride (GaN) light emitting diodes (LED) embody a large field of research that aims to replace inefficient, conventional light sources with LEDs that have lower power, higher luminosity, and longer lifetime. This thesis presents an international collaboration effort between the State Key Laboratory for Mesoscopic Physics in Peking University (PKU) of Beijing, China and the Electrical Engineering Department of California Polytechnic State University, San Luis Obispo. Over the course of 2 years, Cal Poly’s side has simulated GaN LEDs within the pure blue wavelength spectrum (460nm), focusing specifically on the effects of reflection gratings, transmission gratings, top and bottom …

High Resolution Simulation Of Synthetic Aperture Radar Imaging, Cindy G. Romero

Master's Theses

The goal of this Master’s thesis is to develop a more realistic simulation of Synthetic Aperture Radar (SAR) that has the ability to image detailed targets, and that can be used for Automatic Target Recognition (ATR). This thesis project is part of ongoing SAR ATR research at California Polytechnic State University (Cal Poly) sponsored by Raytheon Space & Airborne Systems and supervised by Dr. John Saghri.

SAR is a form of radar that takes advantage of the forward motion of an antenna mounted on a moving platform (such as an airplane or spacecraft) to synthetically produce the effect of a …

Memento: Personal Scrapbook Android Application, Ryan Joseph Rosete

Computer Engineering

The Memento project focuses on providing Android phone users with a new alternative to capture memories. Its main purpose is to create an application that stores pictures and data on an Android phone. Users can view these saved entries for later use to recall what they have done in the past or show to others. The initial idea for this project stemmed from a personal interest in both scrapbooks and popular microblog services. The application aims to provide a new service that is currently not offered in the Android Market.

In order to create this application, there are two main …

Optimization Of P3ht-Pcbm Polymer Solar Cells Through Device Simulation And Manufacturing, James Boom

Computer Engineering

Given a good model and implementation of that model, computer simulation can be used to reduce the time and material costs of research. To this end I worked with other students to manufacture, test and simulate the single layer P3HT-PCBM solar cell. Using the data collected from this project, future work can then be done with the project's simulator to further optimize these types of solar cell devices.

Polyenvi, Stephen Beard, Josh Engel, Paul Fake, Diego Flores, Alvaro Nunez, Miguel Wong

Electrical Engineering

Poor indoor air quality is a problem that is recognized by the Environmental Protection Agency (EPA) to cause health issues. In order to raise awareness of this problem, this document outlines the construction of a device that economically measures air quality through five metrics: dust, smoke, ozone, humidity, and temperature. The device integrates with a router to provide users access to information about their indoor air quality anywhere over the internet as well as local access to the data via an LCD mounted on the router. By increasing indoor air quality awareness, this device will aid users in making adjustments …

Ofdm Simulation In Matlab, Paul Guanming Lin

Electrical Engineering

The objective of this project is to demonstrate the concept and feasibility of an OFDM system, and investigate how its performance is changed by varying some of its major parameters. This objective is met by developing a MATLAB program to simulate a basic OFDM system. From the process of this development, the mechanism of an OFDM system can be studied; and with a completed MATLAB program, the characteristics of an OFDM system can be explored.

Power Losses Associated With Stand-By Chargers, Robert Peralta

Electrical Engineering

Many average households across the United States may not realize how much power is saved by simply removing the plug from the receptacle when not being used. A misconception with stand-by/portable chargers is; if a device is not connected to the charger, but the charger is still connected to the wall, then the charger will not consume power. That statement is false. The following report will demonstrate how much power is lost in an average household. When a reference is made to an average house, I will refer to a 4 bedroom single family home. The house will have an …

Electric Bicycle System, Robert Cong, Rodney Martinez, Mark Casilang, Peter Vong

Electrical Engineering

The Electric Bicycle System is a systems project that incorporates three different ways of charging a lithium-ion battery: the 120VAC wall outlet, regenerative braking, and solar power; which is used to power an electric hub motor running a bicycle. The purpose of the project is to show that it is possible and relatively simple, to build an electric bicycle by oneself. This project can be broken down into five separate categories: the lithium-ion battery, the DC-DC boost converter, the solar panel, the motor, and the motor controller. Each of these will be built upon and improved further by future students, …

Transmission Line Forecast Study, Ryan Garoogian

Electrical Engineering

Load forecasting is the procedure to predict future loading conditions on a power system. Using simulation software such as ETAP you are able to predict abnormal voltage conditions, overloading of certain equipment, as well as determine protective equipment from short circuit studies. This study consisted of a 115kV loop network with multiple loading busses and one infinite bus. There was no separate generation other than the infinite bus. As load increased from forecasting to the future voltage dropped. To restore voltage levels capacitors were added at strategic points in the system to boost the voltage back up. Preparing yourself for …

High Voltage Switched-Mode Power Supply For Three-Phase Ac Aircraft Systems, John Brewer Jr., Kamaljit Bagha

Electrical Engineering

The purpose of this senior project was to design and fabricate a proof-of-concept Three-Phase Sinusoidal Switched-Mode Inverter with a power output capability of 10 kW and nominal operating frequency of 400 Hz for AC aircraft system applications. This senior project report includes a thorough discussion and presentation of the inverter system background, requirements, design, construction, and testing processes.

Energy Harvesting From Exercise Machines Cal Poly Recreation Center Implementation, Justin Arakaki, Praveen Lawrence, Audrey Nakamura

Electrical Engineering

As Cal Poly moves towards an environmentally friendly campus, the Energy Harvesting from Exercise Machines (EHFEM) project looks to generate a new source of renewable energy to help power the Cal Poly Recreation Center. The project focuses on retrofitting exercise machines to generate electricity. As of December 2009, Audrey Nakamura, Justin Arakaki, and Praveen Lawrence developed a design which allows the contribution of electricity generated from multiple exercise machines into the power grid.

The project will require an investigation of retrofitted machine designs by Cal Poly students and commercially available products and systems. The information obtained from the product research …

Design Of A High-Low Unipolar Pulse Width Modulated Inverter, Danny Li, Christian Ramos

Electrical Engineering

This senior project report describes the process of designing a unipolar inverter. This high low, unipolar inverter utilizes switches in which a pair operates in high frequency while a second pair operates in low frequency. The purpose of this project is to convert a range of high DC voltage and convert it to an AC output voltage of 120 Vrms with a power rating of 100 W. Nonetheless, this particular unipolar method of implementing pulse width modulation results in harmonics at multiples of the fundamental frequency leading to easier filtering. However, the switching loss increases because of the complex switching …

Energy Harvesting From Exercise Machines: Bike Buck-Boost Converter, Monroe Diamond, Brian Vuong

Electrical Engineering

This project is a continuation of previous senior projects’ work on Energy Harvesting from Exercise Machines (EHFEM). EHFEM seeks an alternative DC to DC converter to function within the existing exercise bike system. Implementing this new DC to DC converter aims to avoid previous complications other groups encountered, such as only running at low load currents, exceeding an input threshold voltage to begin operation, and performing at low efficiency. In developing this self‐generating exercise bike, Cal Poly wishes to incorporate an array of energy‐harvesting exercise machines in its Recreation Center expansion scheduled for completion in 2012.

Final Design Report: Vibration Table For Cvbt- Vt4 Design Team, Thomas Bevan, Matthew Laurino

Mechanical Engineering

CVBT (Center for Vocational Building Technology) teaches villagers in Northeastern Thailand how to make various concrete products. Many of these products require the use of a vibration table in order to remove air and water trapped within the concrete. Removal of these voids improves the outside surface of the molded concrete, and also allows the use of a lower water to cement ratio, allowing a much stronger finished product. The currently used vibration table (VT3) has several disadvantages associated with it, which the new table (VT4) eliminates. Compared with the VT3, the VT4 has a more rigid tabletop and improved …

Edwards Automation Final Project Report, Benjamin (Ben) Johnson, Joel Masters, Matthew (Matt) Stewart

Mechanical Engineering

The body of this work has been created for Edwards Lifesciences in conjunction with senior project requirements. As such, the information produced and contained within is under a non‐disclosure agreement. As per request by sponsor, the body of the work will not be submitted to any outside parties, and the title page will serve as proof of completion.