Engineering Commons^™

Aircraft Operations Based Mission Requirements, Robert A. Mcdonald

Aerospace Engineering

The mission capabilities of aircraft in the current commercial fleet are a combined result of many factors. The launch customer for each aircraft has a voice in determining the requirements. The manufacturer desires to best position the aircraft in the market considering their own aircraft and their competitors aircraft it will replace and compete with. Consequently, anyone considering the development of an aircraft to compete with or replace an aircraft in-service must do more than simply choose to meet the capabilities of that aircraft. This is especially true when unconventional systems are considered; the fundamental trade-offs for these systems may …

Comparison Of Field Level And Regional Actual Etc Values Developed From Remote Sensing And Dual Crop Coefficient Procedure, Daniel J. Howes, Lucas Hoffmann, Franklin Gaudi

BioResource and Agricultural Engineering

Crop evapotranspiration (ETc) estimates are important for regional water planning as well as irrigation scheduling. Traditional ETc computations utilize published crop coefficients (basal) that are adjusted on a daily basis depending on soil water availability (i.e., dual crop coefficient method). Recent advancements include using remote sensing data such as LandSAT combined with a surface energy balance algorithm (METRIC), allowing crop evapotranspiration to be computed for each pixel throughout images taken during the season. There are limitations and advantages for both methods. Comparisons of soil water balance evapotranspiration values to METRIC values for two scenarios in different regions of California have …

Characterization Of Mixing In A T-Style Microfluidic Chip, Brian Eric Harley

Master's Theses

The goal of this study is to characterize the mixing that occurs in a microfluidic chip. To characterize the mixing, the minimum length to complete mixing and evolution of mixing will be investigated. There are two types of mixing that occur within a microfluidic channel, diffusion and advection. In the beginning of the microfluidic chip, diffusion is the dominant form of mixing, and in the later portion of the microfluidic chip advection is the dominant form of mixing. The type of design used for this experiment was a zig zag geometry microfluidic chip with channel dimensions of 60 µm X …

Use Of Post-Consumer Corrugated Fiberboard As Fine Aggregate Replacement In Controlled Low-Strength Materials, James L. Hanson, Gregory M. Stone, Nazli Yesiller

Civil and Environmental Engineering

This study was conducted to investigate the use of post-con­sumer corrugated board in controlled low-strength material (CLSM) applica­tions. Corrugated fiberboard (termed corrugate), which constitutes a significant fraction of the municipal solid waste stream in the United States (approximately one third by weight), was used as a partial replacement for fine aggregate in CLSM at aggregate replacement ratios ranging from 0 % (i.e., control) to 6 %. The corrugate was fiberized (i.e., repulped) in a blender prior to being mixed with other constituents in the CLSM. The density, air con­tent, and flow consistency of the fresh CLSM were determined, and bleeding …

Transformational Innovation: Reflections On How To Foster It In Engineering Education Systems, Roger Burton, Lizabeth Schlemer, Linda Vanasupa

Materials Engineering

This paper describes the educators’ disposition that we believe is required for transformational innovation. Innovating in this domain relies on interrupting existing patterns. This interruption requires the conscious recognition of patterns through an active practice of self observation. Though self observation does not necessarily need a collective process, it is served by encountering the diversity of views present in groups. Innovation in this sense consists of a fundamental identity shift in the human system and the innovators themselves. Unlike the processes of problem solving and process improvement, transformational innovation requires insight into the individual and collective attention of the designers. …

Design And Experimental Validation Of Continuous Dna Separation Using Itp-Based Microfluidic Device, Nora C. M. Goscinski, Mary E. Rosa, Elizabeth K. Wheeler, Maxim Shusteff

Chemistry and Biochemistry

We have demonstrated a chip-based microfluidic device suitable for rapid and high-throughput DNA separation and purification for downstream analysis. The glass-based device incorporates a transverse free-flow isotachophoresis (tFF-ITP) that overcomes the volume limitations of CE approaches, and allows continuous sample processing in contrast to batch-mode solid-phase extraction (SPE). The device is able to focus DNA at flow rates up to 100 uL/min, and sample conductivity up to 2 mS/cm. Downstream of the chip, 30-40% of DNA from the input sample is recovered as a result of ITP focusing, and preliminary results indicate that this design is able to purify DNA …

The Development Of An Integrated Residential Construction Management Course, Scott D. Kelting, Eric A. Holt

Construction Management

This paper presents the recent changes to different delivery methods for a residential construction management course at a major university. The project-based course was delivered similarly to a capstone course by combining Residential Methods, Estimating, Scheduling, and Contracts into one class with one overall final project. The course introduced students to land acquisition, land development, construction services, operations, finance, marketing, and sales. Information about the course’s 14 different delivery methods and the recent changes is provided in this paper. The recent changes are based on a survey that was conducted to obtain the students’ perspectives about the course delivery methods …

Basin-Wide Remote Sensing Of Actual Evapotranspiration And Its Influence On Regional Water Resources Planning, Daniel J. Howes, Charles M. Burt, Kyle Feist

BioResource and Agricultural Engineering

The Irrigation Training & Research Center (ITRC) at Cal Poly State University, San Luis Obispo has been using METRIC to compute actual evapotranspiration from remote sensing sources (namely LandSAT images). The driving force behind this is the increasing need for improved evapotranspiration information on a large scale. A recent study in the Mexicali Valley of Baja California, Mexico utilized the ITRC-modified METRIC procedure to compute the crop and riparian evapotranspiration component of a basin-wide water balance. The resulting comparison between the mass balance computed change in groundwater storage and that computed using groundwater elevation data showed excellent agreement. For water …

Pump Performance With Sand Wear, Charles M. Burt, Kyle Fesit

BioResource and Agricultural Engineering

In many installations, pump performance declines over time due to sand wear. In order to pinpoint the type and rate of wear caused by pumping water with higher-than-average sand concentrations and its direct effect on various pump impeller materials, vertical pump impeller/bowl assemblies of approximately 900 GPM were each pumped for up to 2500 hours with high concentrations of sand in the water. Two different impeller materials were used for a total of five configurations. Well pump operation was simulated by maintaining a constant discharge pressure. The degrading performance, in terms of changing flow rate and kilowatt load, was recorded …

Spatial Variability In Evapotranspiration Related To Irrigation System Distribution Uniformity, Daniel J. Howes, Lucas Hoffmann, Franklin Gaudi

BioResource and Agricultural Engineering

Understanding the causes of variable ET in a field is critical for maximizing yield on a per-acre basis as well as for proper irrigation scheduling and regional water management. Since 2004, the ITRC has provided technical irrigation support and management for over 2,000 acres of center pivot irrigated forage crops being supplied by reclaimed water near Palmdale, California. Irrigation scheduling is conducted using a daily soil water balance dual crop coefficient approach. Detailed records on planting and harvest dates, daily water applications, pivot run speeds, and annual distribution uniformity evaluations are maintained along with daily reference evapotranspiration data from a …

Equating A Car Alternator With The Generated Voltage Equation, Ervin Carrillo

Electrical Engineering

No abstract provided.

Improving Model Performance Using Season-Based Evaluation, Misgana Muleta

Civil and Environmental Engineering

Computer models have become vital decision-making tools in many areas of science and engineering including water resources. However, models should be properly evaluated before use to improve the likelihood of making sound decisions based on their results. The model evaluation technique practiced today in hydrology assumes that model parameters are season insensitive and attempts to identify “optimal” values that would describe watershed behavior during dry and wet seasons. This assumption could compromise accuracy of model predictions. This study demonstrates performance improvement that would be achieved when a season-based model evaluation approach is pursued. A global sensitivity analysis (SA) model has …

Optical Mode Pattern Study Of Gan Based Leds With And Without Nanoscale Top Grating, Gregory Chavoor

Electrical Engineering

This study analyzes optical confinement factor and light emitting mode order for three different GaN LEDs: a conventional LED, thin Film LED, and thin Film LED with a photonic crystal (PhC) grating. For the first structure, we increase the thickness of Al_xGa_1-xN from 0 to 600nm, alter the x composition in Al_xGa_1-xN from 0.05 to 0.2 in steps of 0.05, and adjust the p-GaN and n-GaN thicknesses each from 0 to 200nm. For the second structure, we alter the n-GaN substrate thickness from 300-1000nm in steps of 100nm and 1000-4000nm in steps …

Design And Production Aspects Of An Electroluminescent Segment Display, Veronica Kopp, Chris Nixon

Graphic Communication

The purpose of this study was to get a better understanding of the different ways printed circuits could be constructed and then implemented into creative, visual designs for printed electroluminescent displays. A variety of circuit design variables, such as area and length, were tested that will help create solutions for printed electronics.

This study tested different variables of circuit design, such as length of silver traces and the size of the image area, to help optimize ways to build a printed circuit. Then, findings were implemented into a segmented graphic display in order to analyze innovative ways to utilize multiple …

A Novel In-House Design Of A Bioreactor For The Modeling Of An In Vitro Blood Brain Barrier Model, Ian Mahaffey

Biomedical Engineering

The blood brain barrier is the protector of the central nervous system and a physical barrier that functions to regulate the substances that can pass in and out of the brain; it is the function and integrity of this system that keeps the homeostasis of the central nervous system. Yet this shield against foreign invaders in the blood also prevents drugs designed for treatment of various ailments of the central nervous system from reaching their target in the brain. Developing drugs that can pass through this barrier, and understanding it’s function has become an area of increasing interest. Many researchers …

White Light Led Load System, Ronald Lu, Benjamin Ng

Electrical Engineering

No abstract provided.

Compressed Air Foam Fire Grounds Evolution Tests, Justin A. Lapolla, Alexander L. Morano, Vincent P. Luchsinger

Mechanical Engineering

Compressed air foam firefighting technology has been purchased by a number of urban fire departments in the United States. These departments have curtailed their use of these systems until potential safety hazards associated with the use of compressed air foam systems in interior structure fires are evaluated. This project is part of a greater effort to evaluate the efficacy and practicality of compressed air foam systems for use in structural firefighting. This project focused on developing test apparatuses and test methods for measuring the following safety-related parameters: 1.) nozzle reaction force of a fire nozzle, 2.) the force required to …

Measurement And Analysis Of Vehicle Vibration For Delivering Packages In Small‐Sized And Medium‐Sized Trucks And Automobiles, Vanee Chonhenchob, Sher Paul Singh, Jay Jagjit Singh, Joseph Stallings, Gary Grewal

Industrial Technology and Packaging

In distribution, packaged products are subjected to the variation in vibration levels from transport vehicles that vary in frequency and acceleration while moving to their destinations. This vibration may negatively affect the product or packaging. This study measured and analysed vibration levels in vehicles commonly used to transport packages in the last leg of the package delivery service that is used by single‐parcel carriers. Using data recorders, we monitored vertical, lateral and longitudinal vibrations over 75 h of travel time in five different types of small and medium package delivery vehicles. The study presents these data as power density (PD) …

Differential Regulation Of Articular Cartilage Tensile Properties By Igf-1 And Tgf-Β1 During In Vitro Growth, M. E. Stender, N. T. Balcom, B. Berg-Johansen, K. J. Dills, D. Dyk, S. J. Hazelwood, A. C. Chen, R. L. Sah, S. M. Klisch

Mechanical Engineering

No abstract provided.

Wind Tunnel Modeling Of Small Electric Uav Power System Performance, Nathan R. Phelps

Aerospace Engineering

This report details the design and construction of a testing apparatus for characterization of small electric aircraft power systems designed for use in the California Polytechnic State University San Luis Obispo Aerospace Engineering department’s subsonic wind tunnel. This apparatus was constructed and implemented with the goal of determining system and component efficiencies of an entire power system using RC Aircraft components as an analog for systems currently in use in the current generation of small electric UAV’s in service with the US Armed Forces. The goal of these experiments was to determine where improvements in the system architecture can be …

Wavelength Dependence Of Transverse Mode Coupling With/Without E-Block Of Gan Laser Cavity, K. Lal, G. Chavoor, Xiaomin Jin

Electrical Engineering

Transverse mode wavelength dependence in the gallium nitride (GaN) laser cavity is a new topic. Modal analysis simulations are run to optimize the blue GaN-based laser diode with a wavelength of 400, 430, and 460 nm. It is shown that the optical confinement factor (OCF) has a strong dependence on wavelength of emission and electron-block (e-block) thickness. The OCF can be changed from 4.9% at a 460-nm wavelength to 7.6% at 400 nm, which is a 55% difference. The effect of adding an e-block layer of different widths is also investigated with results showing that an e-block layer can change …

Radiation In The Space Environment, Sally Hermansen, Jennifer Shatts

Aerospace Engineering

No abstract provided.

Requirements Specification For Dsic: Distribution System For Information And Collaboration, Alex Abrahamian

Computer Science and Software Engineering

There seems to exist an invisible barrier between people that should be connected but for whatever reasons (don't hang out in the same circles, don't go to the same meetings, or are geographically separated) haven't met each other yet.

Normally these people will only meet when others bring them together or they are thrown together on a project. DSIC aims to preempt the person discovery process by allowing a way for people to post ideas, events, and other collaborations in a single place that can then be searched by other users.

The system utilizes postings, user profiles, and a tagging …

City Of Industry: Los Efectos Concretos En El Condado De Los Angeles En La Economía, El Medio Ambiente Y La Salud Pública, Christina Andrea Hernandez

World Languages and Cultures

This project attempts to document the development of the City of Industry, located in eastern Los Angeles County, and to examine the environmental as well as socio-economic effects this industrial hub maintains on its surrounding neighborhoods. City of Industry, since its incorporation in 1957, has established an alarming precedent as a privatized city that has informed concrete changes in the local economy, the environment, and the public health of the surrounding communities that are predominantly Latina(o).

The research undertaken for this project represents an interdisciplinary intersection of a special topic in the study of Industrial Engineering: the global logistics industry, …

Raytheon Uav Launcher, Chad Amonn, Spencer Chin, Alexander (Alex) Deuitch, Mark Jastrzebski

Mechanical Engineering

No abstract provided.

Cplop - Cal Poly's Library Of Pyroprints, Kevin Webb

Computer Engineering

California Polytechnic Library of Pyroprints, CPLOP, is a web driven data-base application that stores data from the biology’s departments E. coli Pyrosequencing project. Some of this data was stored in Excel datasheets, while data from the pyrosequencing machines was stored as just a list of random .xml files. There was no useful way to organize and store the massive amounts of data from multiple file sources in one location, nor to perform the complicated searches and comparisons that the project requires. CPLOP’s primary goal is to store such data in three organized tables that relate to one another. It was …

Implementation Of Medicinal Leech Preparation To Investigate The Connection Between The Motor Neuron And Muscle Fiber Via Sharp Electrode Electrophysiology, Chandra Nikole Miller

Master's Theses

There are forty registered organophosphates in the United States and they range from pesticides and insecticides to nerve agents or neurotoxins such as sarin. Organophosphates (OP’s) have been used in chemical warfare for years and tend to lead to death due to an attack on the nervous system. Chemical assays and mass microscopy have been used to assess the concentration of OP’s in the environment, but both methods require the body to metabolize the OP first, which can be detrimental to the victim. It is crucial to come up with a method to investigate and detect these neurotoxins without causing …

Digitally Controlled, Modular Electronic Load, Jason L. March

Master's Theses

This project entails the design and development of a digitally controlled, modular electronic load. The proposed load is unique from existing designs because it has the added ability to increase its maximum current level by adding identical modules in parallel. Each module is designed to sink a maximum of 5A at 60V but more modules allow for more current. The cost and simplicity of the design are considered such that it can be reproduced in-house to replace, whenever possible, the resistor box for load testing of any analog circuits but more specifically power electronic circuits.

The design process as well …

Impact Of Collateral Enlargement On Smooth Muscle Phenotype, Alexander Jerome Bynum

Master's Theses

Peripheral Artery Disease is a very serious disease characterized by an arterial occlusion due to atherosclerotic plaques. In response to an arterial occlusion, arteriogenesis occurs, causing smooth muscle cells to transition from a contractile to synthetic state. Also following an arterial occlusion, functional impairment was seen in the collateral circuit. An immunofluorescence protocol was developed in order to assess the impact of collateral enlargement (arteriogenesis) on smooth muscle phenotype at various time points. Smooth muscle α-actin was used to mark all smooth muscle cells, Ki-67 was used to label proliferating smooth muscle cells, and a fluorescent nuclear stain was used …

Experimental Investigation Of A 2-D Air Augmented Rocket: Effects Of Nozzle Lip Thickness On Rocket Mixing And Entrainment, Trevor Allen Montre

Master's Theses

Cold-flow tests were performed using a simulated Air Augmented Rocket (AAR) operating as a mixer-ejector in order to investigate the effects of varied primary nozzle lip thickness on mixing and entrainment. The simulated primary rocket ejector was supplied with nitrogen at a maximum chamber stagnation pressure of 1712 psi, and maximum flow rate of 1.67 lb_m/s. Secondary air was entrained from a plenum, producing pressures as low as 6.8 psi and yielding maximum stagnation pressure ratios as high as 160. The primary ejector nozzles each had an area ratio of approximately 20, yielding average primary exit Mach numbers …