Engineering Commons^™

Analysis And Optimization Of The Scheffler Solar Concentrator, Simone Alberti

Master's Theses

The Scheffler reflector is a new solar concentrator design which maintains a fixed focus while only having a single axis tracking mechanism. This design makes the construction and operation of high temperature solar concentrators accessible to developing nations. In this project, I wrote computer simulation codes to better understand the dynamics and the effect of deformation or deviations from ideal conditions in order to define necessary manufacturing and operational tolerances. These tools and knowledge drove the prototyping of new reflector concepts by myself and other students on my team. A fiberglass prototype was able to drive the cost of a …

Methane Production By A Packed-Bed Anaerobic Digester Fed Dairy Barn Flush Water, Sean Richard Thomson

Master's Theses

Packed-bed digesters are an alternative to covered lagoon digesters for methane production and anaerobic treatment of dilute wastewaters such as dairy barn flush water. The physical media of packed-beds retain biofilms, often allowing increased treatment rates. Previous studies have evaluated several types of media for digestion of dilute wastewaters, but cost and media fouling have setback commercial development. A major operational cost has been effluent recirculation pumping.

In the present effort, a novel approach to anaerobic digestion of flush dairy water was developed at pilot-scale: broken walnut shells were used as a low-cost packed-bed medium and effluent recirculation was replaced …

Protective Effects Of Milk Phospholipids Against Uv-Induced Dna Damage In Human Skin Cells, Lan-Anh Nguyen

Master's Theses

Skin cancer is the most common type of cancer in the US. The American Academy of Dermatology estimated that more than 3.5 million new cases of skin cancer are diagnosed in the US each year and 1 in 5 Americans will likely to develop skin cancer in their life time. Most cases of skin cancer are caused by exposure to ultraviolet (UV) radiation from the sun. Some of the most common sunscreen ingredients are unstable and can form harmful radicals upon exposure to UV radiation. There is a strong clinical need for a more stable and effective sunscreen ingredient such …

Field And Greenhouse Studies Of Phytoremediation With California Native Plants For Soil Contaminated With Petroleum Hydrocarbons, Pahs, Pcbs, Chlorinated Dioxins/Furans, And Heavy Metals, Matthew Robert Poltorak

Master's Theses

Native and naturalized California plant species were screened for their phytoremediation potential for the cleanup of soil contaminated with petroleum hydrocarbons (PHCs), poly-aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), chlorinated dioxins/furans, and heavy metals. This screening was followed by controlled greenhouse experiments to further evaluate the phytoremediation potential of the best candidates. Field specimens and soils used for this study were collected from the former Energy Technology Engineering Center (ETEC) at the Santa Susana Field Laboratory in Southern California that was operated by the Department of Energy (DOE). Soils at this site contain all of the contaminants of interest (COIs). Nine …

A Pareto-Frontier Analysis Of Performance Trends For Small Regional Coverage Leo Constellation Systems, Christopher Alan Hinds

Master's Theses

As satellites become smaller, cheaper, and quicker to manufacture, constellation systems will be an increasingly attractive means of meeting mission objectives. Optimizing satellite constellation geometries is therefore a topic of considerable interest. As constellation systems become more achievable, providing coverage to specific regions of the Earth will become more common place. Small countries or companies that are currently unable to afford large and expensive constellation systems will now, or in the near future, be able to afford their own constellation systems to meet their individual requirements for small coverage regions.

The focus of this thesis was to optimize constellation geometries …

The Relationship Between Bicycles And Traffic Safety For All Road Users, Jasmine A. Martin

Master's Theses

Over the past twenty years bicycle use as a mode of transportation has grown considerably in the United States. Other studies have examined the individual bicyclist’s risk in proportion to the growth in cycling across cities, a phenomenon referred to as ‘safety in numbers.’ This study expands from that research and examines the effect of cyclists on road safety for all road users.

The study examines the roles of bicycle modal split, a city wide analysis, and bicycle infrastructure, a site based analysis, in road safety outcomes. For the city based analysis, twenty years of crash data in 12 California …

Smooth Muscle Cell Organization In The Stem Region Of The Gracilis Collateral Circulation In Balb/C Mice, Laura Lenae Burckhardt

Biomedical Engineering

Of the approximately 8 million Americans who suffer from ischemic peripheral arterial occlusive disease (PAOD), many present with intermittent claudication, or pain associated with exercise. Impaired vasodilation of resistance vessels is a potential explanation for this symptom. Occluded arteries can lead to increased flow through collateral vessels, which function as natural bypasses around the obstruction. This increase in blood flow and resulting shear stress can cause outward remodeling, or arteriogenesis, which improves the efficacy of collaterals. However, following femoral artery ligation in a mouse model of chronic ischemia, vasodilation in the stem region of collateral vessels is impaired at day …

Development Of A High Precision Quantum Dot Synthesis Method Utilizing A Microfluidic Reactor And In-Line Fluorescence Flow Cell, William Henry Lafferty

Master's Theses

Quantum dots show great potential for use as spectral converters in solar cells, lighting applications, and biological imaging. These applications require precise control of quantum dot size to maximize performance. The quality, size, and fluorescence of quantum dots depend on parameters that are difficult to control using traditional batch synthesis processes. An alternative, high precision process was developed for the synthesis of cadmium-selenide quantum dots using a microfluidic reactor and fluorescence flow cell. The process required creating separate cadmium and selenium precursors that were then mixed in a nitrogen environment at 17°C. Using an NE-300^® syringe pump, the solution …

Winegrape Vineyards And Winery Operations: Energy Efficiency/ Sustainability And Expansion, Stuart Styles, Sierra Layous, Sarah Crable

BioResource and Agricultural Engineering

Southern California Edison (SCE) provides utility services to the greater southern California area. Vineyards and wineries exist throughout the region, and historical data suggests that that they largely do not utilize incentive programs offered by the utility.

As the first phase in a larger study, the Irrigation Training & Research Center (ITRC), located at the California Polytechnic State University, San Luis Obispo, completed a characterization of the vineyard and winery sector as it pertains to energy and water usage in SCE’s service area, including the following major tasks:

1. Identification of vineyard and winery demographics in SCE’s service area.
2. Identification of …

Integrating Remote Sensing Of Evapotranspiration With Applied Water To Target Potential Water Conservation Projects In Watersheds, Daniel J. Howes, Stuart Styles

BioResource and Agricultural Engineering

The overall purpose of the project is to develop a methodology for watershed managers to successfully target and release recommendations to growers that could benefit from improved on-farm irrigation management. Initially it was thought that the methodology could rely on remote sensing of actual crop evapotranspiration, effective rainfall estimates, and water application information (pumped volumes and surface water deliveries) to simply evaluate if fields and farms that applied significantly more water than plants needed could be identified. However, it became clear that, in this region specifically, additional information on water quality, crop sensitivity to salinity, and an assumed good irrigation …

Evaluating Net Groundwater Use From Remotely Sensed Evapotranspiration And Water Delivery Information, Daniel J. Howes, Charles M. Burt, Lucas Hoffman

BioResource and Agricultural Engineering

A detailed, comprehensive, and accurate identification of groundwater aquifer properties will likely never be fully achieved because of the high degree of variability and costs that testing involves. Furthermore, accurate estimates of boundary conditions are essential for groundwater modeling so that investigations of improved management scenarios can be conducted. The lack of key input values at the ground surface boundary limits the ability to accurately assess aquifer dynamics. Of major importance is actual evapotranspiration (water consumption or the loss of water to the atmosphere through transpiration and evaporation). The Irrigation Training and Research Center (ITRC) modified remotely sensed satellite imagery …

The Icon Horn Loudspeaker, Vincent Phan

Mechanical Engineering

A horn loudspeaker in layperson terms is essentially taking a megaphone and integrating it into a standard speaker. Similar to a cheerleader yelling into a megaphone, the horn loudspeaker will amplify the sound from the speaker with no additional power needed. Using standard speaker horn theory, the geometry of the “megaphone” can be engineered to tune the acoustic performance tailored to loudness and/or specific acoustics frequencies. The horn contours are similar to traditional orchestra instruments such as the French horn, trumpet, and tuba. The iconic beauty of a horn married with the quantitative engineering theory creates an aesthetic yet functional …

Investigation Of Conjugate Heat Transfer In Fluid-Structure Interaction Modeling Using Openfoam, Andrew Brown

Aerospace Engineering

No abstract provided.

Team Nathan Suspension, Frankie J. Wiggins, Alex D. Seitz, Justin P. Bautista

Mechanical Engineering

Nathan Cooper is an 8-year old boy with Spinal Muscular Atrophy (SMA). SMA has affected Nathan’s muscle development and requires him to use the Standing Dani™ mobility device. The Standing Dani is a motorized standing wheelchair, or Wheelstand. Nathan controls and uses it to get around. Though the Standing Dani performs well for most functions, it has some distinct issues. The primary issue that this project addresses is its lack of suspension and the discomfort that Nathan feels as a result. After talking with our client, we developed several specifications generally related to geometry, safety, vehicle dynamics, and reliability. Many …

A Study Of Shock Analysis Using The Finite Element Method Verified With Euler-Bernoulli Beam Theory; Mechanical Effects Due To Pulse Width Variation Of Shock Inputs; And Evaluation Of Shock Response Of A Mixed Flow Fan, David Jonathan Gonzalez Campos

Master's Theses

A Study Of Shock Analysis Using The Finite Element Method Verified With Euler-Bernoulli Beam Theory; Mechanical Effects Due To Pulse Width Variation Of Shock Inputs; And Evaluation Of Shock Response Of A Mixed Flow Fan

David Jonathan González Campos

For many engineers that use finite element analysis or FEA, it is very important to know how to properly model and obtain accurate solutions for complicated loading conditions such as shock loading. Transient acceleration loads, such as shocks, are not as common as static loads. Analyzing these types of problems is less understood, which is the basis for this study. FEA …

Improving And Expanding The Capabilities Of The Poly-Picosatellite Orbital Deployer, David Pignatelli

Master's Theses

The Poly-Picosatellite Orbital Deployer (P-POD) has undergone a series of revisions over the years. The latest revision, described in this Master’s Thesis, incorporates new capabilities like EMI shielding, an inert gas purge system, and an electrical interface to the CubeSats after they are integrated into the P-POD. Additionally, some mass reduction modifications are made to the P-POD, while its overall strength is increased. The P-POD inert gas purge system successfully flew, on a previous revision P-POD. The P-POD components are analyzed to a set of dynamic loads for qualification, and successfully undergoes random vibration qualification testing. The P-POD encounters some …

Control Of A Spacecraft Using Mixed Momentum Exchange Devices, Blake J. Currie

Master's Theses

Hardware configurations, a control law, and a steering law are developed for a mixed hardware spacecraft that uses both control moment gyros and reaction wheels. Replacing one or more gyros in a spacecraft with a reaction wheel has potential for cost savings while still achieving much greater performance than using reaction wheels alone. Several simulated tests are run to compare the performance to a traditional all reaction wheel or all control moment gyro spacecraft, including analysis of failure modes and singular configurations. The mixed system performed similarly to all gyro systems, responding within 6% of the gyro system’s time for …

Effects Of Low Velocity Impact On The Flexural Strength Of Composite Sandwich Structures, Jeffrey Scott Carter

Master's Theses

The use of composite sandwich structures is rapidly increasing in the aerospace industry because of their increased strength-to-weight and stiffness-to-weight characteristics. The effects of low velocity impacts on these structures, however, are the main weakness that hinders further use of them in the industry because the damages from these loadings can often be catastrophic. Impact behavior of composite materials in general is a crucial consideration for a designer but can be difficult to describe theoretically. Because of this, experimental analysis is typically used to attempt to describe the behavior of composite sandwiches under impact loads. Experimental testing can still be …

A Control-Chart Based Method For Solder Joint Crack Detection, Jianbiao Pan

Industrial and Manufacturing Engineering

Many researchers have used different failure criteria in published solder joint reliability studies. Since the reported timeto-failure would be different if different failure criteria were used, it would be difficult to compare the reported reliability life of solder joints from one study to another. The purpose of this study is to evaluate the effect of failure criteria on the reported thermal fatigue life and determine which failure criterion could detect failure sooner. First, the application of the control-chart-based method in a thermal cycling reliability study is described. The reported time-to-failure data were then compared based on four different failure criteria: …

Hybrid Silicon Mode-Locked Laser With Improved Rf Power By Impedance Matching, Bassem M. Tossoun

Master's Theses

The mode-locked laser diode (MLLD) finds a lot of use in applications such as ultra high-speed data processing and sampling, large-capacity optical fiber communications based on optical time-division multiplexing (OTDM) systems. Integrating mode-locked lasers on silicon makes way for highly integrated silicon based photonic communication devices. The mode-locked laser being used in this thesis was built with Hybrid Silicon technology. This technology, developed by UC Santa Barbara in 2006, introduced the idea of wafer bonding a crystalline III- V layer to a Silicon-on-insulator (SOI) substrate, making integrated lasers in silicon chips possible.

Furthermore, all mode-locked lasers produce phase noise, which …

Development, Characterization, And Optimization Of Process For Minimal Functional Barrier And Channel Width In Nitrocellulose Paper Microfluidic Diagnostic Platforms, Ryan Daniel Silva

Biomedical Engineering

A central goal of diagnostic microfluidics is to reduce the cost of diagnostic medicine by reducing the equipment and reagents needed to perform diagnostic tests. The literature has demonstrated that a wax printer can be used to pattern nitrocellulose paper with hydrophobic barriers to direct a sample in a defined reaction path, eliminating the need for external pumps and controllers. However, manufacturing methods for minimizing sample volume (and thus reagent volume) in a paper-diagnostic chip have not been well defined. In this work, we experimentally determine manufacturing processes for creating functional features of minimal size—effectively reducing the sample size and …

Vibration Based Planetary Gear Analysis And Damage Detection, Rene Sawatzky

Master's Theses

With this thesis the research at the engineering department is continued, based on previous thesis projects. These projects were considering the possibility of simulation gears with rigid bodies. After researches with different emphasizes on the rigid body simulation, the gained knowledge showed limitations of the rigid body model. Gear failures are very diverse and the actual simulation technique could not represent all necessary failure modes that can occur. That led to this thesis as a research project to find a way to detect and analyze the failure modes that cannot be considered with the current rigid body approach. With the …

A Prototype Microwave Cavity Control Circuit For Use In Next Generation Free Electron Laser, Josh Thompson, Peter Neal Barrina, Jiayi Jiang, Joe Frisch, Steve Smith, Daniel Van Winkle

STAR Program Research Presentations

One of the current programs at SLAC National Accelerator Laboratory is the Linac Coherent Light Source, or LCLS. Using the existing hardware of the last third of their linear accelerator (or “linac”), SLAC has created one of the most energetic X-ray free electron lasers (or “FEL”). Since 2009, LCLS has used this FEL to perform a wide range of experiments across all sciences, most notably ultrafast filming at the molecular scale. As requests for beam-time with this laser increases, SLAC is purposing a linac upgrade to better match this demand. This upgrade, named LCLS-II, will replace existing copper radio frequency …

Foss Big Data Storage Solution, Gary L. Jaffe

STAR Program Research Presentations

Utilizing the AERO Institute as an IT test bed or “sandbox”, a small-agile development team will design, build, and test a data management storage system to support post processing of archived and in-flight data collected with the Piccolo flight control system and Compact Fiber Optic Sensing System (C-FOSS). Both systems are integrated on the APV3 aircraft, a small remote-operated vehicle. Due to the amount of data collected from C-FOSS, a system will be designed to sort and organize large data sets. An open-source database will be explored as a viable solution to manage large data loads and provide multi-cluster system …

Local Buckling Behavior Of Round Steel Tubes Subjected To Compressive Loads, Joseph Moore, Ben Fell

STAR Program Research Presentations

This project will investigate the local buckling induced fracture behavior of round steel tubes subjected to axial compressive loads, representative of observed failures in buried pipelines during seismic events. Nine initial tests will be conducted across three lengths of round steel tube: 8”, 12”, and 20”. Another twelve tests will be conducted on the lengths of 12” and 20” to test varying initial compressive force upon the round steel tubes. Three D/t ratios will be considered for each length of round steel tube: 52.6, 78.9, and 121.2. To verify the material properties of the test specimens an ancillary tensile coupon …

Development Of A Silicon Nanowire Mask Using Scanning Probe Microscopy, Ross Gregoriev

Master's Theses

Scanning probe microscopy techniques were used to investigate the desorption of hydrogen passivated silicon to form SiO2 etch masks The application of the etch masks were planned on being used to manufacture silicon nanowires. Low concentration hydrofluoric acid was used to passivate the surface. The surface was selectively depassivated by SPM techniques. Scanning tunneling microscopy (STM) and atomic force microscopy (AFM) were used to create the masks. The STM system used was found to desorb hydrogen from the surface faster than the STM could image and was considered incapable in the configuration investigated. This led to the use of atomic …

Foss Big Data Storage Solution, Nurdeen Salami

STAR Program Research Presentations

NASA projects require a reliable approach to store large volumes of data. Accordingly, it is crucial to adopt a lightweight, reliable, and scalable database. Current NASA databases bear costly license fees with undesirable speed and flexibility. The purpose of utilizing the AERO Institute as an IT test bed, or “Sandbox,” is to design, build, test, and implement software solutions prior to transfer to NASA projects. Cassandra coupled with the Astyanax API is a viable solution for storing big data. Store a minimum of 2GB of C-FOSS data in multiple file formats (.csv, .log, .xml, and .jpg). Use benchmark tests to …

Particle Image Velocimetry Of Transverse Jets In Crossflow, Jesse K. Tsai, Kayla Kuzmich, David Forliti, Kriss Vanderhyde, Nils Sedano

STAR Program Research Presentations

The jet in crossflow (JICF) has been an ongoing study for the past several decades with applications in the field of fluid mechanics. This particular flow field produces vortical structures tied to the entrainment and mixing of two separate fluids. Research of the JICF seeks to determine a model and trajectory scaling law for future designs. This will help future designers to optimize the mixing and homogeneity of the two fluids to decrease emissions from pollutants, make ignition easier, and improve combustion efficiency of rockets.

Our experiment will employ Particle Image Velocimetry (PIV) to determine the fluid motion of the …

Space Race: Capturing An Orbiting Sample And A Nation’S Imagination, Stephanie La Liberte, Andrew Chavarin, Shubham Gogna, C. Daniel Thomas, Vy Phung, Gabriel Udomkesmalee

STAR Program Research Presentations

A proposed architecture for future planetary sample return missions would consist of capturing on-orbit a sample container (collected from the surface of a planetary body and launched into space) and transferring the sample container into an earth return/reentry capsule. A challenge to this proposed architecture is integrating space applicable sensor technologies with sufficient capturing devices. While useful technologies on Earth, Earth-related rendezvous/capture technologies, such as magnetic field sensors, sound-based sensors, and Earth orbit-based radios like GPS, are not applicable to space. Inspired by the in-orbit sample capture challenge, NASA JPL has designed the Space Rendezvous And Capture Experiment (Space RACE). …

Does A Plastron Improve Heat Transfer?, Madani A. Khan, Jeffrey Alston, Andrew Guenthner

STAR Program Research Presentations

Superamphiphobic surfaces strongly repel both water and oils. In this work, aluminum coupons are processed by sanding with various grit of sand paper to impart microscale roughness. Subsequent submersion of the aluminum substrate in boiling water grows nanoscale grass-like structures. The oxide layer of Al is slightly soluble in water. During a fast diffusion/equilibrium, Al₂O₃ nanograss grows on the surface. A low energy coating is then deposited on the surface. The micro and nanoscale features create re-entrant structures that trap air enabling contact liquid to be in a Cassie-Baxter state. Superamphiphobicity of the samples were confirmed by …