Engineering Commons^™

Comparing Radiation Shielding Potential Of Liquid Propellants To Water For Application In Space, John Czaplewski

Master's Theses

The radiation environment in space is a threat that engineers and astronauts need to mitigate as exploration into the solar system expands. Passive shielding involves placing as much material between critical components and the radiation environment as possible. However, with mass and size budgets, it is important to select efficient materials to provide shielding. Currently, NASA and other space agencies plan on using water as a shield against radiation since it is already necessary for human missions. Water has been tested thoroughly and has been proven to be effective. Liquid propellants are needed for every mission and also share similar …

The Tierni Resistance Training System, Michael J. Hansen, Abigail M. Youngblood, Gabriel M. Johnson

Biomedical Engineering

The purpose of the Tierni Resistance Training System project was to design and construct functional workout apparel that has built-in resistance. For this product, the key customer requirements we set out to address were most importantly material comfort and functionality, followed by stylishness, lack of latex, safety for injured and uninjured users, and washer safety. To meet these customer requirements, we started by researching current resistance training technology, and used the findings as a springboard for our own design development. After initial brainstorming, engineering specifications were generated based on the customer requirements. These specifications revolved around the thermal insulation, pressure, …

Solar Soiling Mitigation, Claire Desmith

Electrical Engineering

This senior project aims to mitigate performance losses that occur in Photovoltaic (PV) systems due to soiling of the panels. Soiling is the natural occurrence of debris accumulation on panels, depending on local climate conditions. Soiling loss refers to efficiency lost due to dirt and dust accumulation on the panels. The debris reduces system output by shading on a smaller scale. In addition to uniform soiling, corner soiling is observed in framed modules as debris collects in the corners of the modules. While solutions currently exist to clean modules to mitigate soiling losses, these solutions are often expensive and time …

Project G.H.O.S.T., Matthew Morell, Austin Conrad, Zackeris Gordon, Conan Estes

Mechanical Engineering

Project G.H.O.S.T aimed to produce a model transmission with a control system for high performance/racing electric vehicles to utilize the full capability of the electric motor at higher speed applications. Current electric vehicles have a large amount of torque and use a fixed gear ratio that compromises between both high and low speeds with performance peaking around 65 miles per hour. A typical electric motor used in this application has approximately 1800 ft-lbs of torque up to 5,000 rpm. Past approximately 5,000 rpm, the torque rapidly drops off and so does the overall vehicle performance. Though transmissions exist that could …

Smud Solar Regatta, Logan Garby, Nam Le, Jacob Singer, Alejandro Carrera, Laura Casas

Mechanical Engineering

The Sacramento Municipal Utility District (SMUD) hosts the Solar Regatta every year in Rancho Seco, CA, a competition which consists of teams building a solar powered boat to compete in three races: the sprint race, endurance race, and slalom race. The Cal Poly Solar Regatta team was informed mid-project by SMUD that the competition has been canceled once again for spring 2021, but the team decided to move forward with the construction of the boat. The previous Cal Poly team from 2019/2020 designed the hull and propulsion system of the boat. The 2020/2021 team worked with the previous team in …

Enduro Campers, Ryan J. Shomsky, Alexander W. Horst, Kevin S. Pickering, Jackson L. Aplanalp, Luke Arana, Will Firestone

Mechanical Engineering

The Enduro Campers senior project team (Formerly known as Lobo Campers senior project team) was recruited by Mr. Leif Stein to assist in the design, manufacturing, and testing of the materials and components of his company’s expedition box camper. The two main focuses of the project, divided into two sub-teams, were on the testing and manufacturing process of the materials used in the camper, and on the design and analysis of the camper’s access door, step box, and other subsystems.

The focus of the materials analysis and manufacturing team was based around the design parameter to use composite sandwich panels …

Final Design Report Cal Poly Wind Power - Balancing System, Caleb Seth Cross, Ethan Andrew Czuppa

Mechanical Engineering

The Cal Poly Wind Power club is anticipating joining the annual Collegiate Wind Competition in the year 2021. This competition hosts schools from all around the country, who meet and compete against each other by testing the wind turbines they have made throughout the academic school year. Tasks included in the competition test the wind turbine’s efficiency, power generation, overall design, and stability in extreme conditions.

Cal Poly is planning to implement a formal balancing system to support their 2021 wind turbine. Our senior project team undertook mitigating mass imbalance in the wind turbine; mass imbalance occurs when the center …

A Method For Visualizing The Structural Complexity Of Organizational Architectures, Jacob Michael B. King

Master's Theses

To achieve a high level of performance and efficiency, contemporary aerospace systems must become increasingly complex. While complexity management traditionally focuses on a product’s components and their interconnectedness, organizational representation in complexity analysis is just as essential. This thesis addresses this organizational aspect of complexity through an Organizational Complexity Metric (OCM) to aid complexity management. The OCM augments Sinha’s structural complexity metric for product architectures into a metric that can be applied to organizations. Utilizing nested numerical design structure matrices (DSMs), a compact visual representation of organizational complexity was developed. Within the nested numerical DSM are existing organizational datasets used …

Studying The Efficacy Of An Injectable 3-Dimensional Fibrin Extracellular Matrix To Characterize The Effects Of Antitumor Agents On Sw620 Cells In A Microfluidic Device, Thèo Anastos

Master's Theses

Colorectal cancer is the third most common cancer in the United States and there is currently a lot of research going into new antitumor agents to kill the cancer. One method for replicating the tumor response to a drug in vivo is by creating an in vitro drug testing model to replicate the in vivo condition. This research project was conducted to determine the efficacy of testing tumor cultures in a microfluidic device as a way to provide accurate drug responses in vitro instead of using in vivo subjects in clinical trials. A total of four experiments were conducted with …

Electro-Muscle-To-Muscle Transfer, Hailey Quinn Casino, Jake Keola Javier, Samuel Joseph Borda, Charlotte Amalie Anderson

Biomedical Engineering

The Electro Muscle to Muscle Transfer (EMMT) system will entail designing, manufacturing, and providing a wearable device that stimulates paralyzed muscles in the hand by sampling and amplifying muscles from the forearm. With further development, the system may be capable of using different muscle inputs other than the forearm muscles along with different stimulated muscle outputs other than the hand. The system functions as a rehabilitative device for spinal cord injuries, irreparable nerve loss and/or damage, and improper neuromuscular function. It is not for total treatment nor for curing of the disabilities listed above but to alleviate the side effects …

Cal Poly Wind Power - Blade Pitching System, Jenna Hartley, Ben Santos, Willie Bass

Mechanical Engineering

The Cal Poly Wind Power club (CPWP) has sponsored our senior project team to design and implement a system to dynamically pitch the blades of their prototype horizontal-axis wind turbine. A blade pitching system can improve a turbine’s efficiency under certain operating conditions and prevent failure under extreme wind speeds. To ensure reliable control, the pitching system must be able to pitch quickly and accurately. Turbine efficiency can be improved by a pitching system with low power draw and low inertia about the rotor axis. The turbine is subjected to static and dynamic loading occurring due to changing aerodynamic forces, …

Los Angeles Homeless Epidemic - An Analysis Of Proposition Hhh, Howard T. Duong

Construction Management

Passed in 2016, Proposition HHH is a $1.2 billion bill hoping to curb the homelessness epidemic that is rising in the city of Los Angeles with the newly added construction of 10,000 supportive housing units. This study serves to analyze and detail the homelessness epidemic in the Los Angeles Area, familiarizes the reader with how Proposition HHH funding works together with developers, as well as some of its shortcomings to date so far. To garner additional research, a survey was performed with a sample size from both the developers engaged with Proposition HHH and residents of the product in order …

Field Welding Repair Of Heavy Equipment, Phil Akahori

Construction Management

Welding repairs of heavy equipment in the field can vary in levels of success. This can be due to the high strength steels used in the manufacture of heavy equipment implements that require special metallurgical considerations. Repair difficulties can be further compounded by the limitations of tooling typically found on a construction site and schedule commitments. Overloading or excessive impacts can cause damage to the bucket teeth of an excavator or bulldozer rippers. A shop could perform a proper repair but that increases cost and takes precious time. A successful repair of these items done out in the field can …

How Green Buildings Effect Both Price And Desire In The Real Estate Housing Market, Bryson Lino

Construction Management

There has been a recent emphasis on green building certification. Unlike other conventional building approaches, green building has emerged as a sustainable way of building in the real estate housing market. As a result of the green building revolution, the real estate developers have been prompted to acknowledge the essence of environmental and social factors on the investment properties’ value. It is through such a paradigm shift that the green building has redefined the real estate business. Given that climate change has emerged as a major global issue, interventions have been made to avert the emission of high levels of …

The Use Of Virtual Reality In Construction Safety Training, Matthias S. Guegler

Construction Management

The emergence of virtual reality has seemingly limitless possibilities in the construction industry. One of the most significant applications of this technology in construction, is its use in virtual reality safety training, as it allows for more immersive and retainable training programs. Construction VR training programs have been developed to allow workers to train in a safe working environment and develop the necessary skills in recognizing hazardous jobsite situations. The purpose of this study is to measure the effectiveness and potential of virtual reality construction training as it compares to traditional industry training through attitudinal research. To this end, a …

Net-Zero Homes, The Homes Of The Future, Primo Guseppi Facchini

Construction Management

Net-Zero homes are the homes of the future (Holmes, 2018). What makes Net-zero homes unique is they rely on solar power, opposed to all standard housing that relies on the power grid. These homes use solar instead of other forms of energy generating technology because it is more affordable and better for the environment. California has blazed the trail for the rest of the United States and the world to follow with their Net-Zero housing proposition. Starting January 2020 California will require all residential buildings to be net-zero homes. Net-Zero homes are important because it is no secret that our …

Indispensable Homes In Third World Countries: Constructing A Home In Tijuana, Mexico, Myles Hubers

Construction Management

This project was created to explore a way in which poverty around the world could ultimately be reduced. The way in which this project intends to demonstrate a method used to reduce poverty is by building a home for a specific family in Tijuana, Mexico. In doing so, this home will act as a model home for a manual, comprised of steps that should be taken to construct similar homes throughout any third world country. The goal of this project is to highlight the importance of poverty in the world while also creating a buildable solution in order to reduce …

The Effects Of Covid-19 On A Commercial Construction Company: A Case Study, Dylan Reynolds

Construction Management

The COVID-19 pandemic of 2020 and 2021 resulted in many states issuing stay-at-home orders and closing businesses. In some states, construction was deemed essential and allowed to remain open. Dempsey Construction, Inc. is a Southern California commercial construction company that was permitted to continue operation with the exception of a brief lockdown in March and April of 2020. Despite being permitted to remain open, the company had to face many direct and indirect challenges resulting from the worldwide pandemic. In addition to schedule adjustments, daily cleaning on jobsites and in the office, and increased material prices and lead times, Dempsey …

The Effects Of Waste Marble Powder On Sustainable Concrete, Jeremy S. Tennesen

Construction Management

Sustainability has been growing consistently more popular in construction, with projects introducing innovative ideas to build greener every year. One material that has not experienced many innovations since emerging in building use is concrete. The reason behind this could be the chemical process of curing concrete being unique compared to most materials. While concrete can be broken down into some of its original components, water, cement, and admixtures used are not retainable. This makes it difficult to recycle the material, and the aggregates recovered from recycling also experience a loss in strength. With admixtures being involved in most concrete mixes …

Best Practices For Bridge Crane Implementation And Installation: A Case Study, Sterling D. Treloar

Construction Management

Overhead Cranes, which are more commonly referred to as bridge cranes, provide a substantial amount of flexibility with respect to the user’s ability to move material and heavy equipment throughout a factory or manufacturing facility. Oftentimes, the client is not aware of the benefits of implementing bridge cranes rather than using mobile gantry cranes. The client may not be aware of the benefits of bridge crane installation occurring at the beginning of a project or in fact, including it in the initial design of the project, rather than considering it in the middle of the project. This case study will …

Wood Post And Non-Climb Fencing Construction For Hoofstock Pasture, Jessica Miller

Construction Management

This paper covers the planning, site clearing and construction of a new 7,100 square foot hoofstock pasture for the nonprofit group Conservation Ambassadors at their Northern campus in Weimar, California. The project involved planning the layout of the new pasture based on the owner’s preferences for pasture size, material type and location as well as removing several old pre-existing posts to prepare for the new fence to be built. New two-foot deep post holes were dug and the four-inch diameter, eight-foot long wood posts were leveled and set in concrete. Horizontal H-braces and cross brace tension wire were added to …

Paso Robles Police Department Outdoor Training Facility Improvements - Phase 1, Zachary T. Stellini

Construction Management

This paper outlines the pre-construction and construction of the 24,300 square foot Paso Robles Police Department outdoor training facility improvements. The project focuses 12,000 square feet of the total site with improvements that include earthwork and new concrete flatwork. This project is group project with Gavin Abraham and Nic Petri that is broken up into 3 phases, this paper will primarily focus on the phase 1 which includes grading and excavation. The purpose of this project was to provide the Paso Robles Police Department with a modern, functional facility that allows its officers to be better equipped to protect the …

Case Study: Infection Control On The Arroyo Grande Community Hospital Emergency Room Expansion And Remodel Project, Daniel E. Romero

Construction Management

California hospital and healthcare projects typically involve California’s Office of Statewide Health Planning and Department (OSHPD) which is governed by the state of California and the Fire Marshal. Along with OHSPD as the governing organization, healthcare and hospital projects often must incorporate infection control practices. The Arroyo Grande Community Hospital Emergency Room Expansions and Remodel project incorporated infectious control practices. Qualitative research was conducted through semi-structured interviews of the project management team along with primary and secondary sources. The tools and practices used on this project included negative air machines, temporary walls with sound barriers, zip walls with fire rated …

Sustainable Bus Stop: Design & Pre-Construction, Nadov O. Rader

Construction Management

The objective of this project is to design and prepare to build a sustainable bus stop for the City of San Luis Obispo (SLO). Compiled are pre-construction plans and documents for delivery of a sustainable bus stop. All pre-construction services include: project budget/estimates, construction plans and specifications including architectural and electrical plans, timeline/schedule, and materials lists. With a strong focus on sustainability, the design incorporates the use of photovoltaic panels as a form of renewable energy to power features of the sheltered bus stop. This includes a light fixture and a pump to use collected rainwater to nourish native vegetation …

Common Issues Of Compliance With Personal Protective Equipment For Construction Workers, Alexandra N. Gattuso

Construction Management

Personal Protective Equipment (PPE) is an essential component to the safety of workers on construction jobsites. Construction is ranked one of the most dangerous industries to work in, with the highest reports of fatal work injuries. For this reason, it is required that construction employees wear PPE to keep them safe during work. Despite this requirement, many workers neglect to wear PPE, exposing themselves to high risk of injury and death. A survey was conducted on thirty-three (33) construction workers in California to gain a better understanding of issues with PPE and reasons for non-compliance. The survey found that only …

Industry Perceptions On Public Sector Construction Delivery Methods, Evan Mccollough

Construction Management

The public construction sector in the United States has predominantly used the traditional delivery method, also known as design-bid-build, to obtain and deliver projects. Accurately assessing the direction of the public construction sector must include analysis of the emergence of Public-Private Partnerships (P3) and alternative delivery methods. P3 projects in the United States are relatively new, an emerging trend from the late 2000s as an innovative way to utilize private capital to finance public projects, beyond a typical bond sale. Alternative delivery methods refer to any project award or management arrangement other than the typical design-bid-build, lump sum, competitive bidding …

A Case Study On The Capacity And Competitiveness Of Small-Sized Contractors On The Central Coast Of California, Lev S. Garcia

Construction Management

The market conditions in which small-sized construction firms in California compete can be significantly influenced by the regional location of their projects. This research paper reviews a qualitative case study executed through semi-structured interviews with two construction firms on the Central Coast of California. Through gaining the perspectives of two companies, one that recently grew into a medium sized company and one that is small-sized, this case study aims to identify market characteristics that influence small-sized companies’ abilities to compete on the Central Coast. The case study indicates that competition between existing companies, the threat of new arrivals, the cost …

Residential Bathroom And Tile Shower Addition During Covid-19 Quarantine, Joseph Szillinsky

Construction Management

This paper outlines the design and construction of a new code compliant bathroom including: a low profile shower pan, ceramic-tile shower enclosure, and new plumbing piping and fixtures. One of the main objectives was to complete the new shower which would be easily accessible and maintenance free in order to support a local elderly couple. The selection of this project took place during the COVID-19 pandemic approximately nine months after California issued the first mandatory statewide Stay-at-Home Order. During the early design and development stages an opportunity to collaborate with a local trades-person was identified as well as the need …

Comparing The Environmental Impacts Of Using Mass Timber And Structural Steel, Khang Hoang Nguyen, Steelee Knight Morgan

Construction Management

Although mass timber has seen a gradual rise in demand in the past, there has been a lack of extensive research on the environmental impacts of using mass timber as a primary structural framing material. This paper compares structural steel, and mass timber’s total embodied carbon emissions. Accurate estimates were made using plans and specs for different projects retrieved from semi-structured interviews. The estimates were input through the EC3 Calculator to provide extensive total carbon emissions measurements between each construction material. Using structural steel framing increased the project’s overall environmental impact by roughly 84% compared to using mass timber. The …

Subcontractor Claim Management And Dispute Resolution Methods In The State Of California Versus The Province Of British Columbia: A Case Study, Harrison A D Grant

Construction Management

In the construction industry, discordance between what is expected versus what is delivered often arises. This disparity is commonly handled using informal negotiation. However, if negotiations fail, then claims and disputes often emerge. Issues involving scope of work, change orders, schedule, and payment can lead to conflicts. Companies try to employ the best alternative dispute resolution method to settle subcontractor claims and disputes without the need for litigation. Speaking with construction professionals in California and British Columbia, a difference in opinion exists as to which method is considered most effective when dealing with subcontractor claims and disputes. In California, the …