Engineering Commons^™

Bilingual Training Course For Redwood Residential Fence Company, Adriana Bernabe Martinez

Construction Management

The Hispanic population has been increasing in the US over the past twenty years, and made up 42.9% of the construction workforce in 2018 (Data USA, n.d.). Because of this population increase, it’s expected that 1 in 4 persons will be of Hispanic descent by the year 2050 (Canales, 2009). Due to this increase, many language barriers exist that can create serious issues in construction. Language barriers cause productivity to decrease and increase concerns for the workers’ safety. Although OSHA trainings are available in Spanish, the opportunity to take these courses vary from company to company and it is rare …

Risk Management In Response To Covid-19: Comparative Case Study, Justin Hong

Construction Management

The COVID-19 pandemic has affected many aspects of the construction industry. Construction industry members such as owners, developers, subcontractors have experienced varying degrees of impacts because of COVID-19. It is important for companies to adopt risk management strategies to mitigate risk and reduce potential injuries. Due to new rules and regulations mandated by the government, companies had to change the way they operate. This comparative case study focuses on how the pandemic has affected large and small residential companies and compare the risk management strategies set in place by different companies. It was determined that most residential companies were not …

Schedule Efficiency Associated With The Tilt-Up Construction Method: A Case Study, Jake A. Barron

Construction Management

Tilt-up is an efficient method of project delivery that is best suited for large, flat projects such as commercial warehouses and distribution centers. The hypothesis is that this method of casting wall panels on site, and then tilting them upright, allows for certain unique activity sequences which could provide faster project completion. In order to prove this theory, analysis of two tilt-up projects completed within a mile of each other by the same contractor, and assessment of their schedules, will provide insight into the specific tasks that allow for better delivery speed. This methodology paired with interviews of team members, …

Possible Use For Recycled Disposable Face Masks In Concrete, Lauren Douglas

Construction Management

Disposable face masks are one of many single use products that are detrimental to the environment. The construction industry has been introducing new ways to incorporate recycled products into their materials. This paper addresses one possible way to use more environmentally friendly materials in the construction industry. 16 concrete cylinders were prepared using 4x8 forms. The mix was manipulated to test the impact of incorporating varying levels of disposable shredded face masks. Compressive strength and workability were measured in these cylinders. Eight cylinders were prepared for the control batch. Four cylinders were prepared using 10 oz. of shredded face masks …

Wind Blade Manufacturing For The Cal Poly Wind Power Club, Benjamin E. Thompson, Jake R. Lund, Claudia C. Angeles

Mechanical Engineering

The Cal Poly Wind Power Club is entering the 2021 Collegiate Wind Competition (CWC) in June. Last year, three senior project teams were assigned to collaborate and assist the club with the pitching mechanism, the rotor balancing, and the manufacturing process. As the manufacturing team, the goal of our project was to design a manufacturing process for the bladegeometry given. The manufacturing process was required to meet the team’s expectations and CWC’s performance requirements to place highly in the competition taking place in June 2021.These expectations included creating a manufacturing process that is repeatable and reliable for future competitions. The …

Gyroscopic Human Balance Device, Randy Lam Hau, Spencer Ross, Yael Farkash

Biomedical Engineering

This project’s sponsor, Charlie Guitierrez, has decades of experience building assistive walking devices for the wheelchair bound population. During his work, he noticed that many of his clients retained some ability to balance themselves and so theorized that they would be able to walk independently if given some form of assistance. This assistance could potentially be in the form of a wearable gyroscope. Gyroscopes are commonly used to stabilize objects subjected to instability, such as bicycles, motorcycles, and ships. Thus, a wearable gyroscope would assist its user in maintaining overall stability by imparting reactive torques and forces if the user …

Hypoxic Incubation Chamber, Makenzie Jones, Andrea Skattenborg, Henry Elsner

Biomedical Engineering

In developing a model to test anti-tumor drugs, Dr. Christopher Heylman’s lab requires the ability to culture cells in a hypoxic environment. The purpose of this project was to make this possible. Funding for this project comes from the Biomedical Engineering Department, the Hannah-Forbes Fund, and Dr. Heylman’s lab. The chamber must be able to reach a user-defined oxygen concentration and hold that concentration for 48 hours while creating an environment conducive to cell culture. Importantly, the chamber must also be sterilizable and cleanable for repeated use. While several products exist to create hypoxic environments for cell culture, they are …

Condition Monitoring And Fault Detection Of Blade Damage In Small Wind Turbines Using Time-Series And Frequency Analyses, Luke H. Costello

Master's Theses

Condition monitoring systems are critical for autonomous detection of damage when operating remote wind turbines. These systems continually monitor the turbine’s operating parameters and detect damage before the turbine fails. Although common in utility-scale turbines, these systems are mostly undeveloped in distributed, small-scale turbines due to their high cost and need for specialized equipment. The Cal Poly Wind Power Research Center is developing a low-cost, modular solution known as the LifeLine system. The previous version contained monitoring equipment, but lacked decision-making capabilities.

The present work builds on the LifeLine by developing software-based detection of blade damage. Detection is done by …

Development Of An Infrared Thermography System To Measure Boundary Layer Transition In A Low Speed Wind Tunnel Testing Environment, Damien Horton

Master's Theses

The use of infrared thermography for boundary layer detection was evaluated for use in the Cal Poly Low Speed Wind Tunnel (LSWT) and recommendations for the successful use of this technique were developed. In cooperation with Joby Aviation, an infinite wing model was designed, manufactured and tested for use in the LSWT. The wing was designed around a custom airfoil profile specific for this project, where the nearly-flat pressure gradient at a zero pitch angle would delay the chordwise onset of boundary layer transition. Steady-state, RANS numerical simulations predicted the onset of transition to occur at 0.75 x/c for the …

Computational Bone Mechanics Modeling With Frequency Dependent Rheological Properties And Crosslinking, Timothy G. Moreno

Master's Theses

Bone is a largely bipartite viscoelastic composite. Its mechanical behavior is determined by strain rate and the relative proportions of its principal constituent elements, hydroxyapatite and collagen, but is also largely dictated by their geometry and topology. Collagen fibrils include many segments of tropocollagen in staggered, parallel sequences. The physical staggering of this tropocollagen allows for gaps known as hole-zones, which serve as nucleation points for apatite mineral. The distance between adjacent repeat units of tropocollagen is known as D-Spacing and can be measured by Atomic Force Microscopy (AFM). This D-Spacing can vary in length slightly within a bundle, but …

Biological Semantic Segmentation On Ct Medical Images For Kidney Tumor Detection Using Nnu-Net Framework, Andres Bergsneider

Master's Theses

Healthcare systems are constantly challenged with bottlenecks due to human-reliant operations, such as analyzing medical images. High precision and repeatability is necessary when performing a diagnostics on patients with tumors. Throughout the years an increasing number of advancements have been made using various machine learning algorithms for the detection of tumors helping to fast track diagnosis and treatment decisions. “Black Box” systems such as the complex deep learning networks discussed in this paper rely heavily on hyperparameter optimization in order to obtain the most ideal performance. This requires a significant time investment in the tuning of such networks to acquire …

Adaptive Laboratory Evolution Of Scenedesmus Obliquus For Increased Carbohydrate Content And Biomass Productivity, Nahel Ali

Master's Theses

The economics of microalgal bioproduct commercialization would benefit from increased accumulation of energy storage compounds, such as carbohydrates and lipids, and increased biomass productivity. This thesis explores two adaptive laboratory evolution strategies for improving Scenedesmus obliquus: single UV-mutagenesis and low light cultivation at a high dilution rate to produce cultigens with greater carbohydrate content and iterative UV-mutagenesis and selection under outdoor conditions in a raceway pond at a high dilution rate to increase biomass productivity.

Two cultigens were generated with the goal of increased carbohydrate content: K5 and K7. Both were mutagenized for 5 seconds and cultivated in 50-mL …

Machine Learning Approaches To Historic Music Restoration, Quinn Coleman

Master's Theses

In 1889, a representative of Thomas Edison recorded Johannes Brahms playing a piano arrangement of his piece titled “Hungarian Dance No. 1”. This recording acts as a window into how musical masters played in the 19th century. Yet, due to years of damage on the original recording medium of a wax cylinder, it was un-listenable by the time it was digitized into WAV format. This thesis presents machine learning approaches to an audio restoration system for historic music, which aims to convert this poor-quality Brahms piano recording into a higher quality one. Digital signal processing is paired with two machine …

The Effect Of Focused Ultrasound On Altering The Diameter Class Of Nerve Fibers Contributing To A Compound Evoked Potential, Analyzed Using A Perturbative Decomposition Technique., Megan Wurden

Master's Theses

Peripheral neuropathies are disorders that involve the damage of peripheral nerve fibers, affecting the ability of different parts of the body to communicate. A differentiating factor in diagnosis between various clinical conditions can be which size class of nerve fibers are affected. A nerve conduction velocity test can be used to assess the viability of the nerve but is a single-parameter test and gives no information about the population characteristics of the remaining active fibers. A method developed and previously reported by Szlavik (2016) utilizes a mathematical perturbed decomposition to determine the normalized frequency of each size class of fiber …

Development Of A Hybrid Particle Continuum Solver, Anthony J. Gay

Master's Theses

When simulating complex flows, there are some physical situations that exhibit large fluctuations in particle density such as: planetary reentry, ablation due to arcing, rocket exhaust plumes, etc. When simulating these events, a high level of physical accuracy can be achieved with kinetic methods otherwise known as particle methods. However, this high level of physical accuracy requires large amounts of computation time. If the simulated flow is in collisional equilibrium, then less computationally intensive continuum methods, otherwise known as fluid methods, can be utilized. Hybrid Particle-Continuum (HPC) codes attempt to blend particle and fluid solutions in order to reduce computation …

Early Wildfire Detection With Line Sensors, Virginia Yan

Master's Theses

Over the last few years, wildfires have become more devastating to communities as the fires are inevitably destructive to many homes, businesses, and ecosystems. Frequent wildfires also pose a significant threat to power grids and nearby residents as they can damage transmission lines and other electrical equipment, which in turn can cause major power shutdowns. Especially in western U.S., severe drought conditions and weather variability cause residents to become more vulnerable to wildfire disasters as their safety is threatened. We are incompetent to control the wildfires effectively despite existing advanced technologies. Hence, an algorithm based on energy conservation and heat …

Development Of A Robust Methodology To Obtain And Assess Myogenic Precursor Cells For Their Use In Regenerative Therapies, Ricardo Lasa

Master's Theses

Peripheral arterial occlusive disease (PAOD) is characterized by buildup of atherosclerotic plaque in peripheral arteries that leads to an occlusion that can interrupt the supply of blood to the peripheral tissue, causing downstream tissue ischemia/hypoxia. PAOD is estimated to affect over 200 million patients worldwide. Current surgical revascularization treatments can be effective in about half of the patient population, leading to a significant number of patients with no treatment options beyond pharmacological intervention and lifestyle modification. The decrease in blood flow downstream of the occlusion leads to increased blood pressure gradient in the microvasculature, specifically in vessels that connect arterial …

Development Of Novel Hardware And Software For Wind Turbine Condition Monitoring, Ryan A. Zhan

Master's Theses

With the increased use of wind turbines as sources of energy, maintenance of these devices becomes more and more important. Utility scale wind turbines can be time consuming and expensive to repair so an intelligent method of monitoring these devices is important. Commercial solutions for condition monitoring exist but are expensive and can be difficult to implement. In this project a novel condition monitoring system is developed. The priority of this system, dubbed the LifeLine, is to provide reliable condition monitoring through an easy-to-install and low-cost system. This system utilizes a microcontroller to collect acceleration data to detect imbalances on …

Experimental Investigation Of The Effects Of Acoustic Waves On Natural Convection Heat Transfer From A Horizontal Cylinder In Air, Katherina V. Prodanov

Master's Theses

Heat transfer is a critical part of engineering design, from the cooling of rocket engines to the thermal management of the increasingly dense packaging of electronic circuits. Even for the most fundamental modes of heat transfer, a topic of research is devoted to finding novel ways to improve it. In recent decades, investigators experimented with the idea of exposing systems to acoustic waves with the hope of enhancing thermal transfer at the surface of a body. Ultrasound has been applied with some success to systems undergoing nucleate boiling and in single-phase forced and free convection heat transfer in water. However, …

Ram Air-Turbine Of Minimum Drag, Raymond Akagi

Master's Theses

The primary motivation for this work was to predict the conditions that would yield minimum drag for a small Ram-Air Turbine used to provide a specified power requirement for a small flight test instrument called the Boundary Layer Data System. Actuator Disk Theory was used to provide an analytical model for this work.

Classic Actuator Disk Theory (CADT) or Froude’s Momentum Theory was initially established for quasi-one-dimensional flows and inviscid fluids to predict the power output, drag, and efficiency of energy-extracting devices as a function of wake and freestream velocities using the laws of Conservations of Mass, Momentum, and Energy. …

A Single-Stage Passive Vibration Isolation System For Scanning Tunneling Microscopy, Toan T. Le

Master's Theses

Scanning Tunneling Microscopy (STM) uses quantum tunneling effect to study the surfaces of materials on an atomic scale. Since the probe of the microscope is on the order of nanometers away from the surface, the device is prone to noises due to vibrations from the surroundings. To minimize the random noises and floor vibrations, passive vibration isolation is a commonly used technique due to its low cost and simpler design compared to active vibration isolation, especially when the entire vibration isolation system (VIS) stays inside an Ultra High Vacuum (UHV) environment. This research aims to analyze and build a single-stage …

Performance Of Non-Contact Flow Meters In Irrigation Canals And Surface Drains, Kyle Feist, Jack Evans, Zack Markow, Stuart Styles

BioResource and Agricultural Engineering

Flow measurement is an important component of modern irrigation delivery systems. As irrigation projects are modernized, flow measurement devices are being installed in more non-traditional applications. Some applications feature a combination of characteristics that eliminate traditional flow measurement structures. Furthermore, as regulations obligate more districts to report real time diversions, redundant flow measurement devices using different methods or technologies become necessary to reduce the potential for temporary gaps in diversion data. In these cases, non-contact type flow measurement devices may be of interest. Two non-contact flow meters were installed at different irrigation district canals. Data was collected from the non-contact …

Ecg Arrhythmia Classification Using Discrete Wavelet Transformation, Hannah E. Chookaszian, Nathan D. Diekema

Electrical Engineering

Cardiovascular diseases (CVDs) are the highest leading cause of death worldwide with an approximate 17.9 million related deaths every year according to the World Health Organization (WHO). Electrocardiographic (EKG or ECG) signals are electrical signals measured in the heart and are the main indicator for pre-existing cardiac conditions. The application of deep learning methods such as artificial neural networks (ANN) will assist in the automated detection and classification of ECG signals. The current methods for ECG analysis are lacking in accuracy and reliability considering the level of risk involved with CVDs and the importance of a correct diagnosis. Clinicians use …

Tensile Environment Chamber, Cameron Ngai, Trent Hamilton, Mitchell Carroll, Jack Molitor

Mechanical Engineering

This project created the heating system, cooling system, and control system for an environmental chamber for a tensile test machine in the Cal Poly Composites Lab. This chamber allows for students to test material properties under a variety of thermal conditions. This project was done in collaboration with a team working on the structural aspect of the chamber. While consumer environmental chambers are on the market, they often cost more than $50,000. Additionally, our chamber conforms to further size and weight constraints. Because of this constraint, many conventional techniques and components used for these chambers are not feasible for our …

Dual Motor Drive System For Formula Sae Electric Race Car, Bryan D. Neill, Jackson T. Mcfaul, Cole T. Andrews, Isaiah D. Penzell

Mechanical Engineering

This paper serves as the Final Design Report (FDR) for the senior project developed by our team. This FDR builds on our CDR, in which the main deliverable was the detailed design of a planetary gearbox delivering a 5:1 reduction to be mated to an Emrax 188 motor. This planetary gearbox would allow for the possibility of implementing a dual-motor torque-vectoring rear-wheel-drive system in Cal Poly Racing’s electric FSAE car, which has demonstrated in simulation to yield significant performance gain over the current single motor/mechanical LSD system. As this project’s scope is purely mechanical, the intent is for the Cal …

Experimental Testing Of A Lightly Reinforced Concrete Shear Wall, Jerry Hue Truong Luong, Rory Sebastian De Sevilla

Architectural Engineering: Graduate Reports

This project report summarizes the findings of a half-scale laboratory test on a slender lightly reinforced concrete (LRC) shear wall subjected to cyclic loading. LRC shear walls, specifically those of pre-1980’s type design, have longitudinal and horizontal reinforcement ratios near the code minimum, while often lacking confinement in the wall end-zones. These walls are thought to exhibit brittle compressive failure mechanisms such as rebar buckling or concrete crushing based on observations from past earthquakes. Non-ductile concrete buildings are a large contributor to earthquake losses around the globe, as noted in the San Fernando (1971) and Christchurch (2011) earthquakes, to name …

Investigation On The Use Of Small Aperture Telescopes For Leo Satellite Orbit Determination, Luis R. Curiel Iii

Master's Theses

The following thesis regards the use of small aperture telescopes for space domain awareness efforts. The rapidly populating space domain was motivation for the development of a new operation scheme to conduct space domain awareness feasibility studies using small telescopes. Two 14-inch Schmidt-Cassegrain Telescopes at the California Polytechnic State University and the Air Force Research Lab in Kirtland AFB, NM, in conjunction with a dedicated CCD camera and a commercial DSLR camera, were utilized to conduct optical observations on satellites in Earth orbit.

Satellites were imaged during August 2019, and from January 2020 to March 2020, resulting in the collection …

Field Testing The Effects Of Low Reynolds Number On The Power Performance Of The Cal Poly Wind Power Research Center Small Wind Turbine, John B. Cunningham

Master's Theses

This thesis report investigates the effects of low Reynolds number on the power performance of a 3.74 m diameter horizontal axis wind turbine. The small wind turbine was field tested at the Cal Poly Wind Power Research Center to acquire its coefficient of performance, C­_p, vs. tip speed ratio, λ, characteristics. A description of both the wind turbine and test setup are provided. Data filtration and processing techniques were developed to ensure a valid method to analyze and characterize wind power measurements taken in a highly variable environment. The test results demonstrated a significant drop in the …

Real-Time Body Tracking And Projection Mapping In The Interactive Arts, Sydney Baroya

Master's Theses

Projection mapping, a subtopic of augmented reality, displays computer-generated light visualizations from projectors onto the real environment. A challenge for projection mapping in performing interactive arts is dynamic body movements. Accuracy and speed are key components for an immersive application of body projection mapping and dependent on scanning and processing time.

This thesis presents a novel technique to achieve real-time body projection mapping utilizing a state of the art body tracking device, Microsoft’s Azure Kinect DK, by using an array of trackers for error minimization and movement prediction. The device's Sensor and Bodytracking SDKs allow multiple device synchronization. We combine …

Design And Validation Of An Led-Based Solar Simulator For Solar Cell And Thermal Testing, Matthew Gunther

Master's Theses

An LED-based solar simulator has been designed, constructed, and qualified under ASTM standards for use in the Cal Poly Space Environments Laboratory. The availability of this simulator will enhance the capability of undergraduate students to evaluate solar cell and thermal coating performance, and offers further research opportunities. The requirements of ASTM E927-19 for solar simulators intended for photovoltaic cell testing were used primarily, supplemented by information from ASTM E491-73 for solar simulators intended for spacecraft thermal vacuum testing. Three main criteria were identified as design goals - spectral match ratio, spatial non-uniformity, and temporal instability. An electrical design for an …