Engineering Commons^™

Analysis Of Scramento State University Union, Zachary Schuler

Fire Protection Engineering: Culminating Experience Project Reports

Sacramento State Union is a centrally located building with a large occupant load during the school year. This building is a 239,000-square-foot three-story structure built originally back in 1975. This original building was constructed using waffle slab construction. Additions in 1996 and 2016 were built using steel beam and girder construction to meet the total square footage we have today. This mixed-use occupancy is not only a congregation point, but many events are held in this building as well.

In this analysis of the building, fire life safety systems are reviewed and determined if they not only meet the minimum …

University Of Washington Bill & Melinda Gates Center For Computer Science & Engineering, Devin Ide

Fire Protection Engineering: Culminating Experience Project Reports

The purpose of this report is to analyze and evaluate the prescriptive and performance-based criteria used to design the fire protection systems installed in the Gates Center for Computer Science and Engineering at the University of Washington, Seattle Campus. The Gates Center is a five-story building housing business and assembly spaces such as classrooms, workrooms, offices, a lecture hall, event center, and a café. The main architectural feature is a central atrium, which connects the ground, first, second, and third floors of the building.

Aspects of the prescriptive-based fire protection design include egress, automatic sprinkler systems, detection and notification devices, …

Fire Protection And Life Safety Analysis Of The 2704-Hv Hanford Building, Guillermo Rodriguez

Fire Protection Engineering: Culminating Experience Project Reports

This report analyzes multiple aspects of fire protection and life safety design for the 2704-HV Building located at the Hanford Nuclear Reservation Site in Washington State. The analysis contained within focuses on both prescriptive and performance-based designs for the fire systems within the structure. The 2704-HV building is a two-story office building containing approximately 90 individual full-office spaces on each floor along with approximately 60 individual cubicle office spaces on each floor. There are various other types of gathering spaces within the 2704-HV layout including: conference rooms, showers, kitchen and dining areas, training rooms, and lobbies.

The 2704-HV building was …

Fire And Life Safety Evaluation Of An Assisted Living And Memory Care Center, Sarah Chandonait

Fire Protection Engineering: Culminating Experience Project Reports

This culminating project has been submitted as part of the graduate program in Fire Protection Engineering at Cal Poly. It documents an Assisted Living and Memory Care Center’s compliance with applicable fire safety prescriptions contained in the 2019 California Building and Fire Codes (CBC and CFC). Performance-based methods incorporating deterministic design fires were then used to verify that the final building design and operating procedures met the life safety needs of its unique occupants.

The building under analysis was a 45,000 sq. ft, two-story, 58-bed residential care facility for the elderly. Occupants were all 60 years or older without acute …

Fire Protection Analysis Of A K-12 Classroom Building, Raymond Yip

Fire Protection Engineering: Culminating Experience Project Reports

The report evaluates the fire protection features of a K-12 classroom building (Bldg. B) in San Bernardino County, California. Bldg. B is a two-story Type V-A light timber frame construction. At the time of this report’s composition, Bldg. B is undergoing modernization construction. The fire protection analysis of this building consists of prescriptive and performance portions.

The prescriptive analysis verifies the compliance of building egress, passive, and active protection features with the 2019 edition of California Codes of Regulations Title 24 (Title 24) and Title 24-adopted National Fire Protection Association (NFPA) standards. The analysis comprises of four sections: egress, structural …

Iris Island Culminating Project Report, Cory Wolf

Fire Protection Engineering: Culminating Experience Project Reports

This report covers an analysis of each component of the fire protection system within the Iris Island building. The Iris Island building contains several unique features such as a three-story monumental stair on Levels 1 through 3. It also contains several mock court rooms and lecture rooms on Levels 2 and 3 as well as a two-story library on Levels 4 and 5. This document begins with a description of the prescriptive requirements for this building as required by the 2018 edition of the International Building Code. Analysis is performed for the egress systems, the fire resistive construction, the fire …

A Fire Protection And Life Safety Analysis Of An Oupatient Healthcare System Building, Conrad Chandler

Fire Protection Engineering: Culminating Experience Project Reports

The subject building of the report is an outpatient healthcare system building that is a two stories in height and 184,670 SF building. This building offers primary, specialty, and mental health outpatient care to patients throughout its state of location.

The facility is a mixed occupancy building with business as the primary occupancy, a surgery suite that classifies as an ambulatory health care occupancy, and assembly uses in the conference rooms, kitchen, and canteen. The Authority Having Jurisdiction (AHJ) has adopted the National Fire Codes (NFC) published by the National Fire Protection Association (NFPA), and throughout this report, the life …

Analysis Of Arterial Compliance Using A Surrogate Arm Bench Top Model For The Validation Of Oscillometric Blood Pressure Methods, Christopher J. Cunningham

Master's Theses

A study was performed on a recently developed prototype of the Yong-Geddes surrogate arm design to collect compliance data of the various system components and determine the accuracy of measurements made through the bench top model. The study was performed to perceive the effectiveness of the model as a tool for validating non-invasive blood pressure detection monitors. Three stages of testing were performed to gather pressure and volume data from an artificial artery component, a sphygmomanometer, and the surrogate arm system to produce compliance estimations. Mathematical equations from supported arterial hemodynamics studies and clinical trials were applied to the pressure …

Graphite: Open Source 2d Graphics Editor, Christopher H. Mendoza, Oliver A. Dolan

Computer Science and Software Engineering

Graphite is an open source 2D graphics editor aiming to provide a useful alternative to the Adobe product suite while integrating modern ideas from research and industry, including a node-based procedural approach that makes the design process fully non-destructive. Tools from the VFX and gamedev industry like Nuke, Houdini, and Substance Designer have proven the power and flexibility of node-based systems, but they are each lacking in their user experience because of the deep level of complexity that is not abstracted into simpler concepts for users (Adobe Systems, SideFX, The Foundry Visionmongers Ltd., n.d.). Graphite puts the node-based core into …

Drop Test Release Mechanism, Sophie M. Getty, Matthew A. Tichenor, Nash W. Levy, Connor D. Dilloughery

Mechanical Engineering

Many boxes for shipping undergo drop tests by the manufacturer to ensure their durability. Certain constraints are necessary to successfully carry out these tests such as not damaging the box prior to the drop and maintaining consistency throughout every drop.

Our team has designed a Drop Test Release Mechanism that addresses these constraints. It provides repetitive drops for different objects that vary in shape and size such as small electronics or parts. This device utilizes a soft-clamping mechanism that can release an object with minimal force applied onto it prior to drop. A frame made of 80/20 was designed to …

Animatronic Monarch Butterfly: Mechanical System, Janine Rae Moreno, Enrico Cruz, Alexia Murphy, Lakshmanan Muthukaruppan

Mechanical Engineering

This report describes the design, manufacturing, and design verification of an interactive animatronic monarch butterfly created by a team of mechanical and computer engineering students for the Girl Scouts of California's Central Coast. The purpose of the project is to engage Girl Scouts in learning about monarch butterflies and provide hands-on experience in robotics and STEM. The report covers design changes, manufacturing processes, and assembly of various components, including the butterfly body, wings, legs, and electronic housing. The software and electronics used in the project are also briefly discussed, as the computer engineering team was responsible for the software and …

Cooled Liquid Rocket Thrust Chamber, Benjamin Gibson, Kealan Frederick Harris, Ryan Frank Schackel, Bjorn Thorsen

Mechanical Engineering

Cooling may affect the thrust output of a small-scale rocket. Little research is published about small-scale rocket performance. We hypothesize the thrust produced varies as the amount of cooling varies. To facilitate assessing this hypothesis, we have designed and built a liquid rocket engine rated for at approximately 25 lb_f of thrust. Our objective was to build in parallel with Cal Poly Space Systems, who built a rocket engine with similar specifications except without cooling. Our challenge is to integrate film cooling, so that the effects of cooling may be compared to Cal Poly Space System’s engine which has …

Thermoacoustic Refrigerator, Rees Phillip Verleur, Colleen Farrell Mccandless, Anders Matthew Bjork, Yashraj Ashwinkumar Solanki

Mechanical Engineering

In the Thermoacoustic Refrigerator Cal Poly Mechanical Engineering senior project, we designed, built, and tested a thermoacoustic refrigeration system which achieved an average temperature difference of 11.0°C. Our system consists of a resonator tube with an instrumented stack, mounted onto a base with a speaker and amplifier. An external power supply and function generator provide the power and signal to the system, and a thermocouple reader displays the temperature of the top and bottom of the stack. The system consistently achieved a significant temperature difference between the two ends of the stack in various ambient conditions, and it was quick …

Gyroless Nanosatellite Attitude Determination Using An Array Of Spatially Distributed Accelerometers, Kory J. Haydon

Master's Theses

The low size and budget of typical nanosatellite missions limit the available sensors for attitude estimation. Relatively high noise MEMS gyroscopes often must be employed when accurate knowledge of the spacecraft’s angular velocity is necessary for attitude determination and control. This thesis derived and tested in simulation the “Virtual Gyroscope” algorithm, which replaced a standard gyroscope with an array of spatially distributed accelerometers for a 1U CubeSat mission. A MEMS accelerometer model was developed and validated using Root Allan Variance, and the Virtual Gyroscope was tested both in the open loop configuration and as a replacement for a gyroscope in …

Autonomous Attitude Consensus For Nanosatellite Formations In Leo, Laird J. Mendelson

Master's Theses

Consensus strategies are examined as a possible approach to achieving attitude alignment for a large, close-proximity formation of nanosatellites in low earth orbit (LEO). An attitude-only distributed consensus approach is selected for further consideration due to its comparatively low data transmission requirements. The convergence of a connected network of satellites to the attitude agreement subspace under this control law is shown using a Lyapunov stability approach with a set of idealizing assumptions. A moderate-fidelity simulation demonstrates the performance of the control law under realistic conditions that violate those assumptions. Particular emphasis is placed on the conditions that arise from the …

Neural Compression Inference Accelerator: A Cost And Energy-Effective Alternative To Conventional Machine Learning Inference Methods, Matthew Wallace

Master's Theses

Recent developments in machine learning and artificial intelligence have sparked an influx of workloads that require specialized computer hardware for cloud services. The hardware running machine learning models predominantly consists of graphics processing units (GPUs) and tensor processing units (TPUs). However, these com- ponents are expensive for cloud services to purchase, costly for customers to rent, prone to price spikes, and energy-intensive. In this research we show that both cloud services and customers would benefit from utilizing field programmable gate arrays (FPGAs) to alleviate the aforementioned challenges. An FPGA can be configured as a machine learning accelerator, operating similarly to …

Paired Storage Distributed Energy System Design For A Local Community Farm, Neil Albert Collison, Lily Goldman

Electrical Engineering

This project considers the design of a renewable energy microgrid for a 19-acre community farm in San Luis Obispo, CA as the farm seeks to increase the magnitude of its electrical loads, and gain back-up electrical capability. The microgrid design will enable lower carbon emissions, reduce demand on the utility grid while saving on energy costs, and provide improved reliability and resiliency to the operator of the community farm. The eventual implementation of the design by a professional engineering entity will allow the community farm to expand its education program to include renewable energy as well as gain notoriety in …

Energy Storage And Communication System, Noah R. Johnson, Marc Wong

Electrical Engineering

The Industrial Power and Controls Lab in Engineering East is welcoming the addition of a new lab course, EE 435. Schneider Electric sponsors this course, which seeks to teach students how to use the Modicon M580 Program Logic Controller (PLC) in various industry use cases. This project is a continuation of previous senior projects and focuses on developing a lab experiment to teach students how to utilize the M580 in an energy storage use case. More specifically, it focuses on the battery management system that oversees the units and exposes students to the various situations this system may encounter during …

Cubicom: Noisy Office Environment Communication Device, Nicholas Alan Maley, Joshua Michael Heeren, Alejandro Peña

Electrical Engineering

The CubiCom is a system that enables secure and clear communication between users in a noisy office space. It can function in any small cubicle within a 12 foot radius. The system consists of a series of wireless headsets for 6 users to transmit and receive audio, and a communication box that facilitates this process. These headsets are noise-dampening, preventing ambient sounds from interrupting conversation and making sure that all parties can hear each other clearly. Line-of-sight (L.O.S.) with each headset is required to have proper communication between users. This feature ensures no one outside of the room can eavesdrop, …

Power Thyristor Controller For Speed Control Of Dc Motor, Alejandra Zapata, Morgan Erich Boehme, Abdullah Mohammed Awidah, Payton Robert Chalstrom

Electrical Engineering

In this work, a Power Thyristor Controller for Speed Control of DC Motor has been developed with the purpose of replacing an existing simulation experiment, aiming to effectively implement the principle of learning by doing. The primary objective of the experiment setup is to illustrate the fundamental principles and operational mechanisms underlying the firing angle and controlled bridge rectifier. The new experiment is taking advantage of the existing FCRO4100 Single Phase Firing Board that was donated to the University by ENERPRO. The pre-programmed microcontroller is connected to the thyristor bridge rectifier that’s powered by 24VAC. Additionally, a DC motor will …

Audio Research Codec, Charlie Sutro

Electrical Engineering

Active Noise and Vibration Control (ANVC) systems are of increasing relevance as urban areas get more densely populated with people and their noise sources. Community noise is of great importance to many forms of transit that aim to bring mobility to a region with minimal subsequent noise pollution. Active Vibration Control (AVC) is an emerging field of research which can be employed to further mitigated unwanted harshness in an acoustic environment by extending the principals of Active Noise Control (ANC)to solid mediums using surface transducers and piezoelectric actuators.

The Audio Research Codec (ARC) is a compact, cost-effective system designed for …

Polyflowbuilder: An Intuitive Tool For Academic Planning At Cal Poly San Luis Obispo, Duncan Thomas Applegarth

Computer Engineering

PolyFlowBuilder is a web application that lets users create visually intuitive flowcharts to aid in academic planning at Cal Poly. These flowcharts can be customized in a variety of ways to accurately represent complex academic plans, such as double majors, minors, taking courses out- of-order, etc. The original version of PolyFlowBuilder, released Summer 2020, was not written for continued expansion and growth. Therefore, a complete rewrite was determined to be necessary to enable the project to grow in the future. This report details the process to completely rewrite the existing version of PolyFlowBuilder over the course of six months, using …

Analog Circuits For Computing, Nicole Christine Pickett, Lauren Cathy Sueko Chun, Dillon Ryan Nguyen

Electrical Engineering

This project entails designing, simulating, and verifying analog circuits that can perform essential computing functions for power systems applications. The project aims to remedy critical challenges associated with handling calculations digitally, namely, time and power. This project's scope includes creating a library of circuits in SPICE that can be used to model and simulate complex mathematical equations. From these SPICE models, the circuit can be constructed physically, where the solution can be generated in less time using less power than doing the computation digitally. The performance and efficiency of analog computing will be measured and compared to conventional digital methods.

Detecting Alzheimer's Disease Using Artificial Neural Networks, Sally Lee, Mia Keegan

Electrical Engineering

This project aims to use artificial neural networks (ANN) in order to detect Alzheimer’s disease. More specifically, convolutional neural networks (CNN) will be utilized as this is the most common ANN and has been used in many different image processing applications. The purpose of using artificial neural networks as a detect method is so that an intelligent way for image and signal analysis can be used. A software that implements CNN will be developed so that users in medical settings can utilize this software to detect Alzheimer’s in patients. The input for this software will be the patient’s MRI scans. …

Low-Cost Portable Laser Communication Device, Tom Elkayam, Basile Louis Scoffie

Electrical Engineering

The portable laser communication device (PLCD), is a low cost system used to set up networks in data isolated regions via an optical line-of-sight communications protocol. In this manner the PLCD transmits at 9600 baud using UART protocol over the visible light band at 635nm. The device is intended to operate in indoor conditions and be semi-permanent until redeployed. The PLCD is built as a transmitter, receiver pair and when installed, utilizes tracking to find each other and automatically set up communication within a window of 30° laterally and 10° vertically. Each side of the system is less than 15 …

Variable Frequency Motor Drive Application, Jason G. Milne, Nick Mark

Electrical Engineering

This project entails the development of an electrical engineering undergraduate lab module focusing on utilizing a variable frequency drive (VFD) controlled with a programmable logic controller (PLC) — the Modicon M580. The variable frequency drive is a device that is able to automatically change the frequency of an object through automation without having to physically change the device that is being controlled (ex: fans, pumps, motors, etc.). This project will guide students to understand the software for programming and controlling the PLC within a 3 hour laboratory experiment. Throughout the lab, the students will learn how to implement the PLC …

Vr Force Feedback Gloves, Mark Wu, Claire Chen

Electrical Engineering

The goal of this project is to produce a manufacturing plan for a consumer VR glove. The total addressable market of VR is over 170 million global users as of 2022 (Kolmar , 2022) with a serviceable available market of 300,000 users on Meta’s own social platform (Heath, 2022). The targeted Quest 2 platform utilizes handheld controllers, which causes a lack of immersivity in social settings and gaming scenarios. One common use of the platform involves social platforms such as “Horizons” where users meet in a virtual world to interact; handheld controllers don’t allow users to shake hands, make finger …

Development Of Cal Poly’S Hybrid Ac/Dc House, Eduardo Andres Muñoz, Giovanni Ramirez Angel

Electrical Engineering

The Hybrid House provides an example for what sustainable housing solutions could look like. It also functions as a potential solution to the current rural electrification issues many developing countries face. The use of a DC-DC MISO converter allows for combining multiple power sources into a single DC bus. The Hybrid House integrates the DC bus by employing the use of DC-DC converters for home use. This system may potentially improve the overall system efficiency by avoiding the losses associated with AC-DC converters. The use of the DC bus further leverages the Solar Panel renewable energy solution to become a …

Automotive Collision Warning System Retrofit, Ethan Clark Najmy

Electrical Engineering

In the early 2000s, few automakers began implementing forward collision warning systems in their cars. As technology advanced this system became available on more and more luxury cars. In recent years, this technology has spread to more affordable vehicles driven every day. However, as this technology has only recently advanced to less expensive, more economical cars, older vehicles of the same model may not have this advanced and important safety feature. This project investigates and creates a preliminary design for an affordable, easy-to-install, forward collision warning system that can be retrofitted to vehicles without the system currently installed. Using a …

Emulating The Doppler-Shift For Lora Based Low Earth Orbit Satellite Communication, Ariel Freiman, John Stephen Gharib

Electrical Engineering

This project investigates the adverse effects of the Doppler Shift on a LoRa waveform transmitted from a Low Earth Orbit Satellite or LEOSAT. This work is on behalf of Project OWL, who will use these results to justify further investment into developing a LEOSAT for their communication network. Part of the project is to design a test setup to replicate the Doppler Shift in the lab. The Doppler shift replication setup distorts the transmitted waveform, similar to how the signal gets distorted if sent from a LEOSAT. The test setup will comprise both software and hardware control, wherein software, the …