Engineering Commons^™

A Digital Calibration Source For 21 Cm Cosmology Telescopes, Kalyani Balkrishna Bhopi

Graduate Theses, Dissertations, and Problem Reports (ETD)

Precise calibration of radio telescope beams and gains is a central requirement for 21 cm intensity mapping experiments, which aim to measure large scale cosmological structure through the redshifted emission line of neutral hydrogen. Bright astrophysical foregrounds dominate the sky at these frequencies, and separating them from the cosmological signal demands precise control over instrumental systematics, particularly the telescope beam and its frequency-dependent response. Existing aerial calibration sources are incoherent broadband emitters, detectable only as total power. They provide no direct phase information and suffer from poor sensitivity in low signal-to-noise regimes.

We present the Precision Emitter for 21cm Array …

Ai-Driven Prediction And Reconstruction Of Missing Cased-Hole Logs For Improved Well System Understanding, Samuel Avilez Martinez

Graduate Theses, Dissertations, and Problem Reports (ETD)

Well logging is a fundamental technique in formation evaluation providing continuous, real-time measurements of geological and petrophysical properties within a well. Through the systematic analysis of well logs, engineers and geoscientists can accurately determine critical formation characteristics, including porosity, permeability, lithology, and fluid composition. Well logging is fundamental for making informed decisions and reducing uncertainties in the exploration and development of oil and gas reservoirs.

Despite its significance, the acquisition of reliable well log data in oil and gas wells is often compromised by various operational, mechanical, and formation-related challenges, as well as pressure, fluid, and equipment constraints. In high-risk …

Hyperglycemia Detection From Sigle - Lead Ecg Using A Hybrid Cnn & Transformer Model, Adam Ayomikun Ogunjembola

Graduate Theses, Dissertations, and Problem Reports (ETD)

Abstract
Hyperglycemia Detection from Single-Lead ECG using a Hybrid CNN & Transformer Model
Adam Ogunjembola

Diabetes Mellitus is known as high blood glucose. This high blood glucose level happens when the body has a problem with producing or using insulin. Insulin is a very important hormone that the pancreas makes to control how much glucose gets into the bloodstream and cells. Diabetes Mellitus has an effect on the body if it is not treated, such as damaging the blood vessels and nerves which can lead to stroke, kidney failure, heart attack and permanent loss of vision. Since people with diabetes …

Bi-Level Optimization Of Peer-To-Peer Trading In A Decentralized Energy Market, Marshal Miezah

Graduate Theses, Dissertations, and Problem Reports (ETD)

Distributed power generation based on rooftop photovoltaic (PV) systems integrated with battery storage emerges as a promising pathway for reducing greenhouse gas emissions and im- proving flexibility in modern power systems. This study develops a bi-level optimization model to examine how prosumers maximize profit through peer-to-peer (P2P) energy trading with consumers and the grid, and how consumers minimize cost by leveraging P2P trading. The bi-level problem is reformulated as a single-level mixed-integer programming (MIP) model using Karush- Kuhn-Tucker (KKT) conditions to improve tractability and preserve market-clearing behavior. For the model validation and case study development, prosumer and consumer data are …

Elucidating Structure–Reactivity Relationships In Ni-Catalyzed Co2 Methanation, Majed Alam Abir

Graduate Theses, Dissertations, and Problem Reports (ETD)

The catalytic hydrogenation of carbon dioxide (CO₂) to methane represents a promising strategy for carbon utilization and renewable energy storage within power-to-gas systems. When coupled with hydrogen derived from renewable electricity, CO₂ methanation enables the conversion of intermittent energy sources into storable and transportable chemical fuels compatible with existing natural gas infrastructure. Nickel-based catalysts have emerged as leading candidates for this reaction due to their high activity towards CO₂ methanation, abundance, and cost. However, the performance and long-term stability of Ni catalysts are strongly influenced by catalyst support properties, Ni nanoparticle size, and promoter effect, and …

Swarm Of One: Self-Organization In Multicellular Robots, Trevor Riley Smith

Graduate Theses, Dissertations, and Problem Reports (ETD)

Designing robots traditionally relies on centralized, top-down methods that constrain adaptability and resiliency, producing systems optimized for specific tasks. However, such systems often fail in complex environments, such as extraterrestrial, disaster, or natural settings, where designers cannot foresee every scenario a robot may encounter. Achieving autonomy in these contexts requires robots that are resilient and capable of adapting to the unknown. Multicellular organisms exhibit this adaptability through self-organization, where complex structures and behaviors emerge from local interactions among their cells. Such organisms can be viewed simultaneously as a single entity and a swarm of cooperating cells, i.e., a Swarm-of-One.

This …

Development And Validation Of A Multi-Output Neural Network-Based Virtual Temperature Sensor For Electric Vehicle Thermal Management, Dalton Michael Wiggins

Graduate Theses, Dissertations, and Problem Reports (ETD)

Battery electric vehicles (BEVs) rely on accurate thermal management to ensure component performance, efficiency, safety, and long-term durability. Critical propulsion system components, including electric motors and high-voltage battery packs, are commonly monitored using physical temperature sensors. However, these sensors increase system cost, introduce additional hardware complexity, and may be impractical for directly measuring temperatures at critical internal locations. Virtual temperature sensors (VTSs) provide a software-based alternative by estimating component temperatures using readily available vehicle operating data.

This research presents the development and validation of a long short-term memory (LSTM) neural network-based virtual temperature sensor capable of simultaneously estimating the motor …

Architecture And Mechanistic Engineering Of Nanocomposite Steam Electrodes For High-Performance Metal-Supported Protonic Ceramic Cells, Xuemei Li

Graduate Theses, Dissertations, and Problem Reports (ETD)

The advancement of proton-conducting ceramic cells (PCCs) is crucial for efficient energy conversion in hydrogen- and/or ammonia-based energy carrier systems. However, a bigger success requires significant progress in cell fabrication, interfacial stability, fast electrode kinetics, and high Faradaic efficiency. This study investigates the rational design, fabrication, and performance breakthroughs of PCCs, with a focus on electrode architecture engineering, material interfacial coupling, and mechanistic understanding of electrochemical processes.

The metal-supported fuel electrode structure of PCFCs was systematically optimized, revealing the significant influence of Ni diffusion on cell performance and durability. High power density and stable ammonia-fueled operation were achieved. A heterointerface-rich …

Multiphysics Modeling Of Microwave-Assisted Calcination Of Soec Perovskite Precursors, Hongwei Liu

Graduate Theses, Dissertations, and Problem Reports (ETD)

The calcination of precursor powders is a critical step in the synthesis of solid oxide electrolysis cells (SOECs), where phase purity and microstructural control directly influence electrochemical performance. Conventional calcination methods are energy-intensive and time-consuming, often requiring prolonged high-temperature processing. In this thesis, microwave-assisted calcination is investigated as an alternative approach to enable rapid, energy-efficient processing of SOEC per- ovskite precursor powders. Microwave heating offers distinct advantages, including volumetric and selective heating, reduced processing times, and improved energy utilization compared to con- ventional thermal methods. A multiphysics modeling framework is developed, which integrates electromagnetic wave propagation, governed by Maxwell’s equations, …

Analysis Of Battery Degradation Effects On Optimized Torque Splitting In Dual-Motor Electric Vehicles, Homer E. Butcher

Graduate Theses, Dissertations, and Problem Reports (ETD)

Battery electric vehicle performance depends on both powertrain efficiency and battery-health. In dual-motor all-wheel-drive battery electric vehicles, driver-requested torque can be distributed between front and rear electric drive units, creating an opportunity to reduce electrical energy demand through torque allocation. However, lithium-ion battery aging changes the electrical behavior of the energy storage system through capacity fade and internal resistance growth. Capacity fade reduces the usable energy and vehicle range, while resistance growth increases voltage drop, current-related losses, and battery electrical loading. This thesis evaluates how these degradation effects influence the energy consumption, simulated range, and battery electrical behavior of optimized …

Semantic-Weighted Lidar–Camera Slam For Robust Mapping In Vegetation-Rich Environments, David Aigbovboise Akhihiero

Graduate Theses, Dissertations, and Problem Reports (ETD)

Many LiDAR odometry and SLAM methods are lightweight and effective, but they assume that all LiDAR point returns are equally reliable. In practice, this assumption is often violated in vegetation rich or semi transparent environments, where in a single beam footprint, LiDAR beams may intersect multiple scattering surfaces like leaves, branches or glass. These ambiguities in returns produces probabilistic or biased range measurements that violate the assumptions of most geometric registration frameworks and can lead to drift and inconsistency.

To address this challenge, this dissertation proposes a semantic-weighted LiDAR-camera SLAM framework that integrates class dependent weights into a front-end LiDAR …

Experimental Evaluation Of 100 Ft X 10 Ft Frp Truss Pedestrian Bridge, Ashish Dhital

Graduate Theses, Dissertations, and Problem Reports (ETD)

ABSTRACT

Experimental Evaluation of 100 ft x 10 ft FRP Truss Pedestrian Bridge

Ashish Dhital

FRP truss bridges are now increasingly used in pedestrian bridge applications due to their high strength-to-weight ratio, corrosion resistance, better impact performance compared with conventional materials, and ease of assembly. These advantages make FRP systems attractive for accelerated construction, remote-site installation, and environments where steel or reinforced concrete bridges may experience corrosion-related deterioration. Due to insufficient data on both strength and serviceability (i.e deflection, frequency) performances. Full-scale testing of FRP pedestrian bridges of longer spans (50’-100’) is needed to better understand the dynamic behavior, long-term …

Assessing Water Quality In Drinking Water Distribution Systems: Rural Infrastructure Challenges, Hydrodynamic Effects On Biofilms, And Biofilm Contribution To Disinfection By-Products Formation, Vinila Vasam

Graduate Theses, Dissertations, and Problem Reports (ETD)

Access to clean and safe drinking water remains one of the most persistent public health and environmental challenges in the United States. Maintaining water quality after leaving the treatment plant in drinking water distribution systems (DWDS) is a complicated and often overlooked challenge. Most research focuses on water treatment and source water quality, but not on the miles of pipe that follow. Aging infrastructure, complex flow patterns in the DWDS, and limited resources make water quality management especially difficult. This dissertation includes three core studies: 1) A system-level analysis of small and rural utilities in the geographically complex region of …

Development Of Periodic Plasmonic Nano-Structures For Enhanced Labeled Bio-Sensing Systems, Kyle Zackary Smith

Graduate Theses, Dissertations, and Problem Reports (ETD)

The biomedical industry has seen sustained growth over the past half century, with a continually increasing demand for flexible, easy-to-use, and cost-effective tools. One large area of commercial interest has been point-of-use or point-of-care diagnostics, using optical based Lab-On-Chip (LOC) style systems. Label and label-free fluorescence detection systems are common benchtop modalities that have seen recent integration into these portable, cost-effective LOC applications. However, despite their maturity, there are still opportunities to improve device characteristics, specifically in reference to throughput, limit-of-detection (LOD), and hybrid integration (along with associated costs).

Optical research avenues at WVU have focused on improving these systems …

Deep-Learning-Based Generation Of Synthetic Contactless Fingerphotos, Christopher Harry Burton

Graduate Theses, Dissertations, and Problem Reports (ETD)

The collection of biometric data is a labor-intensive, high-resource process that presents significant logistical, privacy, and cost barriers for researchers and developers. To address these challenges, the biometrics community has increasingly turned to generative models capable of producing synthetic datasets that reflect the statistical properties of real data. While substantial progress has been made in synthetic fingerprint generation for contact-based modalities, the contactless fingerphoto domain has remained largely underserved. This work presents a deep learning-based approach to synthetic contactless fingerphoto generation using a Stable Diffusion model guided by multimodal conditions (text and image). The dataset used for training was collected …

Viscoelastic Behavior Of Magnetically Filled Pdms Elastomers: Influence Of Filler Loading And Particle Type, Madison Procyk

College of Graduate Studies: Theses & Dissertations

Magnetorheological elastomers (MREs) offer a promising pathway for soft, magnetically actuated drug‑delivery systems, yet material‑selection guidelines remain unclear due to limited comparative data across particle chemistries, size scales, and concentrations. This study systematically evaluates how magnetic filler type (carbonyl iron and magnetite) and particle size (micro vs. nano), at two weight percentages – 40 wt% and 50 wt% – in Sylgard 184 PDMS influence the viscoelastic behavior of MREs intended for compliant biomedical actuation. Eight particle formulations were prepared through sieving, controlled mixing, vacuum degassing, and isotropic curing, producing nineteen total specimens (16 with filler particles and 3 without). Dynamic …

Influence Of The Sst K-Ω Stress-Limiter Coefficient On Transonic Shock Buffet Prediction For The Oat15a Supercritical Airfoil, Melinawo Vowotor

College of Graduate Studies: Theses & Dissertations

Transonic shock buffet predictions using the Shear Stress Transport (SST) k–ω turbulence model are known to be sensitive to the stress-limiter coefficient a₁, yet no systematic investigation of this sensitivity exists. This thesis presents a parametric study of a₁ for two-dimensional URANS simulation of shock buffet on the OAT15A supercritical airfoil at M = 0.73 and Re = 3 × 10⁶. Eleven a₁ values (0.25–0.37) are examined at α = 3.5°, and a matrix of five a₁ values across five angles of attack (3.0°–3.9°) maps the interaction with incidence. The results reveal that a₁ acts as a bifurcation parameter: a …

Network-Aware Airline-Specific Flight Delay Prediction Using Tree-Based Ensemble Models, Mary Dufie Afrane

College of Graduate Studies: Theses & Dissertations

Flight delays pose persistent challenges to the efficiency and reliability of air transportation systems, affecting airlines, airports, regulators, and passengers alike. As traffic demand grows and operational environments become increasingly interconnected, accurately predicting both departure and arrival delays has become crucial for effective planning and mitigation. This study presents a network-aware, airline-specific framework for predicting flight delays in U.S. domestic air transportation systems using tree-based ensemble machine learning models. A large-scale dataset of 1.98 million flights, enriched with weather information, is used to develop predictive models for both departure and arrival delays. To capture the structural and operational complexity of …

Sustainable Safety Planning On Two-Lane Highways: A Random Forest Approach For Crash Prediction And Resource Allocation, Fahmida Rahman, Cidambi Srinivasan, Xu Zhang, Mei Chen

Civil Engineering Faculty Publications

During the safety planning stage, accurate crash prediction tools are critical for prioritizing countermeasures and allocating resources effectively. Traditional statistical approaches, while long applied in this field, often depend on distributional assumptions that may introduce bias and limit model accuracy. To address these issues, studies have started exploring Machine Learning (ML)-based techniques for crash prediction, particularly for higher functional class roads. However, the application of ML models on two-lane highways remains relatively limited. This study aims to develop an approach to integrate traffic, geometric, and critically, speed-based factors in crash prediction using Random Forest (RF) and SHapley Additive exPlanations (SHAP) …

Detection And Management Of Attacks On Synchronized Networks, Michael T. Spearman

Honors Theses and Capstones

The Precision Time Protocol (IEEE 1588) provides sub-microsecond clock synchronization across packet-switched networks and has become foundational infrastructure in 5G fronthaul, industrial control systems, and financial exchanges. Despite its criticality, most deployed PTP networks operate without active security monitoring, and no standardized detection mechanism exists for the class of attacks that deliberately stay below conventional jitter thresholds. This thesis investigates whether hardware-level ptp4l offset logs alone are sufficient to reliably detect two such attacks, slowly wandering packet delay injection and rogue master spoofing, and whether detection can occur before severe synchronization failure.

A hardware-in-the-loop testbed was constructed using two hosts …

Deep Learning Approaches For Voltammetric Analysis Of Coffee, Ryan Koes

Honors Theses

This thesis investigates deep learning approaches for voltammetric analysis of brewed coffee using a low-cost electrochemical system and screen-printed electrodes (SPEs). Traditional analytical methods, such as high-performance liquid chromatography (HPLC) and gas chromatography-mass spectrometry (GC-MS), provide precise quantification of key compounds but require expensive instrumentation and specialized expertise, limiting accessibility. While SPEs offer a more accessible alternative, they yielded poor results with traditional processing; however, when combined with a neural network, the system proved more effective. In experiments with 132 coffee samples, mean errors for caffeine, CGA, and TDS predictions were 52.98 ppm, 70.48 ppm, and 0.08%, respectively. These findings …

A Web-Based Wizard-Of-Oz Platform For Collaborative And Reproducible Human-Robot Interaction Research, Sean O'Connor

Honors Theses

The Wizard-of-Oz (WoZ) technique is widely used in Human-Robot Interaction (HRI) research, but two persistent problems limit its effectiveness: existing tools impose technical barriers that exclude non-engineering domain experts (the Accessibility Problem), and the fragmented landscape of robot-specific implementations makes interaction scripts difficult to port across platforms (the Reproducibility Problem- concerning execution consistency and portability, not third-party replication). Through a literature review, I identified three design principles to address both: a hierarchical specification model, an event-driven execution model, and a plugin architecture that decouples experiment logic from robot-specific implementations. I realized these principles in HRIStudio, an open-source, web-based platform providing …

Combining Haptic Feedback With Electromyography To Study Knee Injury In Stationary Cycling, Christopher Kirby

Honors Theses

Patellofemoral Pain Syndrome (PFPS) is the most prevalent overuse injury in cycling, often linked to altered neuromuscular activation patterns of the quadriceps and hamstrings. While sensory feedback has successfully modified cyclists posture, there is a critical lack of evidence-based interventions targeting the underlying muscle activation imbalances associated with chronic knee pain. This study aimed to develop and validate a novel, real-time biofeedback system that utilizes electromyography (EMG) to trigger vibrotactile cues, aiming to shift muscle onset timing earlier in the pedal stroke to mitigate PFPS-related imbalances. A closed-loop system was engineered by integrating a Delsys EMG system with a SageMotion …

Design And Analysis Of Energy Recovery Methods For Reduced Aircraft Emissions, Joshua C. Hauck

Honors Theses

Aircraft flights are an increasingly popular mode of transportation. However, their harmful impacts on the environment are a growing concern. Many engineers have worked to develop fully electric aircraft to address this issue. Although they are much more sustainable than conventional aircraft, electric aircraft encounter severe limitations imposed by current battery technology. One alternative route engineers have taken is developing energy recovery methods (ERMs). These are marketed as devices that reduce aircraft fuel consumption without significantly changing their structure and functionality, making them an excellent short-term solution. However, there is little to no consideration of the tradeoffs induced by the …

Buckling Analysis Of Auxetic Composite Laminates And Optimal Design Using Lamination Parameters And Machine Learning, Hans Bendon Maria Tamil Selvan

Mechanical and Aerospace Engineering Theses

Composite materials are widely used as structural panels in aerospace, automotive, and civil engineering applications, where buckling is often a critical failure mode. This thesis focuses on the analysis and design of composite laminates that maximize buckling performance under prescribed stiffness and thickness constraints.

The first part of the study investigates the buckling behavior of auxetic laminates, which exhibit a negative Poisson's ratio. While previous studies suggest that auxetic laminates can achieve higher critical buckling loads than non-auxetic laminates under simply supported boundary conditions with lateral restraint, the influence of other boundary conditions and plate aspect ratios has not been …

Flood Damage And Social Vulnerability In Coastal New Hampshire, Mitchell S. Berry

Honors Theses and Capstones

This study investigates the relationship between flood-induced building damage and social vulnerability in coastal New Hampshire, with a focus on communities increasingly affected by sea-level rise, storm surge, and high tide events. Using a dataset of 2,528 single-family homes, the analysis integrates flood depth maps (coastal, pluvial, and fluvial), building-level damage estimates, and a housing-burden-based metric to assess how physical and social factors interact to shape flood impacts. Results show that flood depth is the primary driver of building damage, with the most severe impacts concentrated in coastal areas experiencing deeper inundation. However, when buildings are grouped by vulnerability, higher …

Assessment Of Advanced Glazing Systems For Building Energy Efficiency In Hot-Arid Climates, Ahmad I. Elshamy, Yousef Elgefly, Yara El-Metwally, Serag Salem

Architectural Engineering

The built environment is considered among the most contributing factors to energy consumption. The building envelope plays a crucial role in determining the building energy consumption, regulating heat transfer and maintaining adequate indoor environmental quality. Hence, optimizing the thermal performance of the building envelope by achieving optimal glazing solutions while fulfilling the Sustainable Development Goal (SDG 7) is the main aim of this research. This study investigates the impact of various facade glazing systems on the building energy performance, focusing on the cooling energy consumption of an office building in a hot arid climate, Cairo, Egypt. The novelty of this …

Effects Of Metal-Modified Catalysts On The Desorption Performance Of Mixed Amine Solutions And Machine Learning Prediction, Xunxuan Heng, Zhenzhen Zhang, Longhua Zhu, Li Yang, Shugang Xie, Zeyu Wang, Dongtai Han, Fang Liu, Kunlei Liu

Mechanical Engineering Faculty Publications

The high energy penalty associated with solvent regeneration is still a major bottleneck in amine-based CO₂ capture. In this work, the effects of five solid acid catalysts on the desorption performance of a mixed-amine solvent were compared, and the HY catalyst with superior desorption behavior was selected and further modified with four transition metals (Co, Mn, Gr and Ce) to enhance its catalytic activity. The findings indicate that the CO₂ desorption capacity and maximum desorption rate of the Co-modified HY catalyst reach 48.96 mmol and 0.02211 mmol/s, corresponding to increases of 36.80% and 35.39% relative to the blank …

Sewer Pipe Condition Assessment Using An Ensemble Machine Learning Framework For Infrastructure Decision Support, Mahnaz Rouhi

Civil Engineering Dissertations

Aging wastewater infrastructure presents significant challenges for municipalities across the United States, with many sewer networks approaching or exceeding their design life. Conventional inspection methods, such as closed-circuit television (CCTV), are limited by subjectivity, cost, and inefficiency. To address these challenges, this study develops an ensemble machine learning framework for assessing the structural condition of sewer pipelines using inspection records enriched with geospatial attributes.

The primary objective of this research is to enhance predictive accuracy, interpretability, and decision-support for risk-based asset management. The scope of the study encompasses 4,802 CCTV inspection records from Dallas, TX, and Tampa, FL, integrating physical, …

Videoscoop: A Non-Traditional, Domain-Independent Framework For Video Analysis, Umme Hafsa Billah

Computer Science and Engineering Dissertations

Due to the proliferation of cameras in handheld devices and the widespread use of CCTV, images and videos have become a preferred alternative for capturing and disseminating information. Automated analysis for understanding image or video contents (e.g., objects, activities, backgrounds, situations of interest, etc.) is critical for many applications such as Civic Monitoring, Surveillance (in general), monitoring activities in Assisted Living environments, and many more. Image and Video Analysis (IVA) research has been ongoing for several decades, resulting in numerous techniques for algorithmically analyzing and understanding image and video contents.

Image Analysis (IA) has advanced in several areas, including object …