Engineering Commons^™

Test 060: Bates Steel Mule Model D 15-22, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 059: Holt T-11 25-40, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test ####: Withdrawn, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 053: Allwork 14-28, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 057: Avery Single Row Cultivator 5-10, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 014: Minneapolis 22-44, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 021: Wisconsin Model "E" 16-30, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 022: Gray 18-36, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 026: Hart-Parr 30, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 039: Avery Six Cylinder Model C, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 046: Frick Model C 15-28, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 067: Twin City 20-35, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

The Factors Influencing The Price Of Metals On The Metal Market, Thomas Patrick F. Walsh

Masters Theses

"Every year the various engineering and industrial magazines print curves showing the rise and fall of metal stocks throughout the year. to the ordinary reader, these curves are seldom intelligible; he sees the ups and downs; he knows that the prices have risen and fallen; but he rarely knows what causes these changes -- and the curves themselves never tell. This paper tries to remedy this defect; it draws its curves, and, in the light of historical events, which it recounts, tries to determine the causes for the fluctuations in the market. it further places these factors on the curve …

The Preparation And Physical Properties Of Benzene- And Toluene-Sulphonamides, Karl K. Kershner

Masters Theses

"The formation of sulphonamide derivatives is often of distinct importance. These substances are easily purified and give sharp mepting points which make them of value for identification phases of research work. Also they are of value commercially as in the production of saccharin and other similar compounds. The purpose of this investigation is to secure information on the comparative production and yield of sulphonamides, and intermediate products, formed from their respective ring hydrocarbons, as benzene and toluene. careful melting point are taken on purified products and solubility curves developed for different solvents. The latter give an interesting basis for comparison"--Introduction, …

Test 012: Huber Light Four 12-25, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 023: Titan 10-20, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 040: Avery 6 Cylinder Motor Cultivator, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

The Nebraska Tractor Law And Rules For Official Tractor Tests, L. W. Chase, E. E. Brackett, O. W. Sjogren, C. K. Shedd

Nebraska Agricultural Experiment Station: Historical Circulars

The Nebraska Tractor Law, which became effective July 15, 1919, was enacted to encourage the manufacture and sale of improved types of tractors and to contribute to a more successful use of the tractor for farming. It was thought that the best method of accomplishing these objects would be to require a tractor of each model sold in the State to be tested at the State University and to have the results of these tests made public. These tests will give reliable information on the power, capacity and fuel consumption of each tractor and also some information on endurance. The …

Rules For Official Tractor Tests, Nebraska Tractor Test Lab, Agicultural Experiment Station

Nebraska Tractor Tests

The Nebraska Tractor Law known as House Roll 85, 37th session, which became effective July 15, 1919, was enacted to encourage the manufacture and sale of imporved types of tractors and to contribute to a more successful use of the tractor for farming.

It was thought that the best method of accomplishing these objects would be to require a tractor of each model sold in the State to be tested at the State University and to have the results of these tests made public. These tests will give reliable information on the power capacity and fuel consumtion of each tractor …

Metallurgical Results From Black Copper Smelting, Preston King Horner

Professional Degree Theses

No abstract provided.

The Roasting Of Zinc Ores In The Manufacture Of Sulphuric Acid By The Contact Process, Clarence Eugene Peterson

Professional Degree Theses

"The unprecedented demand for sulphuric acid of the higher strengths (98% and higher) in the manufacture of explosives, has stimulated the zinc smelters to increased efforts in the recovery of their Roaster gases in the form of Sulphuric Acid. The Lead-chamber process is unsuitable, however, in making "strong" acid and the smelters naturally turned to the contact mass or catalytic processes. In the roasting of zinc ores practically all of the sulphur is removed as sulphur dioxide, the disagreeable odor and unmistakable injury to surrounding localities, of which, first led to the adoption of sulphuric acid plants by most zinc …

On The Microscopic Determination Of Cadmium In Metallic Zinc, James Presley Gill

Professional Degree Theses

"A quick and accurate determination of Cadmium in Metallic Zinc by all ordinary chemical methods now in use, so far as the writer has been able to ascertain is at best only approximate. However, longer methods and very delicate ones for determining Cadmium are in use that are very accurate, but these methods are so long and so delicate that very few commercial laboratories care to use them. Now, it has been known for some time that Zinc and Cadmium do not form an alloy which when in the solid exist either as a solution or a compound. They do …

Rules For Tractor Demonstrations, Nebraska Tractor Test Lab

Nebraska Tractor Tests

The object of these rules, instructions and data is to make all tractor demonstrations of this kind comparable and of the greatest educational value. Anyone who has conducted tractor demonstrations in the past has realized the necessity of some standard rules to follow and those who afterwards have referred to the results, deplore the lack of uniformity in the demonstrations and the data. For those who have not had this experience will find that it is a great help to have satisfactory rules to follow.

The value of these demonstrations depends largely upon the accuracy of the data reported on …

Graphics And Its Application To The Progress And Cost Analyses Of A House Building Construction Company, Frank Lewis Leonard Wilson

Masters Theses

"In the graphical analyses of Stresses in Framed Structures, we study, by means of diagrams, the stability or equilibrium of structures and the relation between the external forces and the stresses created in the members of the frame. The principle involved is that we may represent any force both as to direction and intensity by a straight line, by considering the direction of the line to be identical with that of the force and adjusting its length according to any arbitrary unit adopted for the forces under consideration. By this means we can solve the stresses in framed structures with …

Father Of Test Law Explains It, Nebraska Tractor Test Lab

Nebraska Tractor Tests

Nebraska State Representative Wilmot F. Crozier of Osceola, Nebraska, who fathered and pushed the tractor bill through the Nebraska State Legislature. On September 19th, 1919, he tells why he formulated the law and his story to Implement & Trade Journal.

The Occurrence Of Oil And Gas In Osage County, Oklahoma, Donald Hewson Radcliffe

Professional Degree Theses

"Osage, the largest county in Oklahoma, is situated a little to the east of the north central part of the state. It consists of an area of approximately 2,350 square miles, or about a million and a half acres, extending from T. 20 N. to T. 29 N. and from R. 2 E. to R. 12 E. inclusive. As this country lies between some of the best oil producing areas of the State, as it is definitely known to be folded, and as the folds tested have proven that the chances of obtaining production on favorable "structure" in the Osage …

Electrolysis Of Neutral Solutions Of Znso₄, Knud Fabricius Hansen

Professional Degree Theses

"The purpose of the following experiments was to obtain informations concerning the character of the deposits, the efficiencey [sic], et al. in the electrolysis of neutral solutions of ZnSo₄"--Purpose, page 1.

Determination Of Critical Point Of Concentrating Tables On Arizona Copper Ore, J. C. Finagin Jr., W. C. Hogoboom

Professional Degree Theses

"In the concentration of an ore by means of concentrating tables, there is a critical point in sizing beyond which the valuable minerals can not be recovered. Theoretically, the lighter gangue is washed over the side of' the table and the heavier mineral, regardless of size, is recoverable at the end, these concentrates being graded from coarse to fine sizes up the slope of the table. In practice, however, the finer sizes of concentrates are found mixed with the middlings and tailings, as indicated by the arrows on the diagram of the concentrating table shown below. The problem is to …

Measurement Of Air Under High Pressure By Orifice Method, George E. Mellow

Bachelors Theses

"The measuring of compressed air, under high pressures, by means of observing the drop in pressure on passing thru an orifice, is in a new field of endeavor. The necessity of measuring compressed air, in order to handle it economically, is obvious. Hence, the importance of a simple device by which this may be done. A device, which may be duplicated at any time, at any place, with very little expense, and ordinary materials"--Introduction, page iii.

Some Tests On The Grinding Of Cement Clinker With A Hardinge Conical Ball Mill, Gilbert F. Metz

Professional Degree Theses

"The Hardinge Conical Mill is the invention of Mr. H.W. Hardinge and has been fully patented by him. It has been used successfully in the grinding of ores, limestone, phosphate rock, feldspar and talc. The purpose of the tests in this thesis was to determine the worth and adaptability of the Conical Mill for the preliminary grinding of cement clinker and to determine the relative merits of this type of grinder as compared to the roll type of grinder. The tests herein were performed under the direction of the writer assisted personally and through correspondence by Mr. H.W. Hardinge of …