Engineering Commons^™

Test 206: Caterpiller Model 35, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 207: Caterpiller Model 15, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 209: Caterpiller Model 65, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 208: Caterpiller Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 200: Allis Chalmers L, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 201: Cletrac Model 25, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 204: Caterpiller Model 50, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 210: Mccormick-Deering Model W 30, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Investigations Of Diversion On The Lower Mississippi River, Elmer John Sperling

Masters Theses

"The purposes of this investigation were severally as follows: (a) To determine the feasibility of digging pilot channels to scour out channels through the Beouf and Atchafalaya basins of sufficient size to handle the project flows contemplated for these basins in time of superflood. (b) To determine the best forms of the pilot channels and the best approximate dimensions. (c) To determine velocities conducive to erosion, transportation, and deposition; the manner and rate of enlargement under below-bank, bankful, and overbank flows; and the character of trace to be expected after enlargement of the proposed channels. (d) To investigate any suggested …

A Study Of Influence Line Analysis Of Stresses In A Cantilever Steel Highway Bridge, Lawrence King Snyder

Masters Theses

"As its name implies, this thesis introduces to the reader the basic conceptions and principles of the use of influence line analysis of the structural theory relating to calculation of stresses in a steel cantilever bridge truss"--Preface, page i.

A Relationship Between The Mole Fractions And The Absolute Viscosities Of Blended Lubricating Oils, Ernest Reginald Epperson

Masters Theses

"The viscosity of binary liquid mixtures has been a subject of much investigation, but most of the work has been done with mixtures of substances other than lubricating oils. Lubricating engineers have found viscosity to be the most important property of a good lubricant, though up to the present time no one has succeeded in deducing a satisfactory expression by which the viscosity of a blended lubricant may be calculated from a knowledge of the physical properties of its components. This investigation has been an attempt to find a relationship between the absolute viscosity of a blended lubricating oil and …

Concentration Of An Oxidized Lead Ore From Southeast Missouri, Robert Edward Evans

Masters Theses

"In the main ore bodies of the Southeast Missouri Lead Belt the lead occurs as galena disseminated in dolomite. The concentration in the mills is by tabling and flotation. The grade of the concentrates and the recovery of the galena are excellent. However, in certain areas of some of the mines ore has been developed that does not concentrate so readily. Because of its reddish brown color this ore is known locally as "red ore", and the presence of oxidized lead has been suspected. The purpose of this investigation was to determine the extent to which oxidized lead minerals were …

A Study Of Some Methods Of Concentrating Uranium And Radium In Carnotite Ore, H. L. Gibbs

Masters Theses

"Carnotite ore is a source of radium and it is the recovery of this element which is chiefly sought in its treatment. The radium results from the radioactive disintegration of uranium which is one of the constituents of the yellow mineral carnotite. The ores are largely low grade. Higher grade pockets occur scattered in the deposits and because of their irregular occurrence are not easily located. The larger low grade deposits which are more easily accessible contain considerable quantities of calcium carbonate and oxide minerals. These cause a high consumption of the acid used in the chemical treatment of the …

The Solubility Of Calcium Sulfate In Sodium Chloride Solutions, Edward Walter Mockobey

Masters Theses

"The purpose of this investigation was to determine the effect of sodium chloride on the solubility of calcium sulfate, and also, if possible, the effect of sodium chloride on the transition temperature for gypsum and anhydrite"--Purpose of the Investigation, page 4.

Preliminary Construction Of A Photo-Electric Cell Concentrator, Stanley S. Williams

Bachelors Theses and Reports, 1928 - 1970

The separation of the valuable portion from the waste portion of an ore is an individual problem for every ore. However, the various methods for accomplishing this end, more or less classify themselves by the physical properties of the constituents of the ore. Most of the properties of minerals have been utilized in some way or other to affect the separation of the valuable from the invaluable parts. Practically nothing has been done so far with color and luster to attain this purpose.

It is believed that the photo—electric cell could also be used in concentrating a certain class of …

A Study Of Washing Machines, Edna B. Snyder, Morton P. Brunig

Nebraska Agricultural Experiment Station: Historical Research Bulletins

The purpose of this investigation was to study the performance and constructional features of various types of washing machines. The machines studied were of four types, classified on the basis of mechanical construction. The types were dolly, gyrator, cylinder, and vacuum. Eight machines were studied, four of the gyrator type, two of the dolly type, one of the cylinder type, and one of the vacuum type. The material reported in this bulletin includes the following: (1) cleansing action of various washing machines and relation of cleanness of fabric to length of washing period, temperature of water, and size of load; …

A Study Of The Plating Prohibitive Properties Of Various Separators, Bruno J. Pozorski

Bachelors’ Theses

The problem of this thesis is to study the plating prohibitive properties of the various materials commonly used in the manufacturing of separators, and to indicate which material would be most serviceable and feasible in a separator. At one time positives and negatives were kept not more than 0.25 inches apart, with the idea of reducing the intervening layers of electrolyte, and, therefore, the internal resistance of the cell, as much as possible. It was, however, found that the output could actually be increased by putting the plates at greater distances, the fact being that the larger bulk of solution …

The Comprehensive City Plan Of Jacksonville, Florida, George W. Simons Jr.

City and Regional Planning -- Florida

Jacksonville, Florida

Comprehensive city plan of Jacksonville, Florida. Prepared at the direction of the City Commission of the city of Jacksonville under the guidance and supervision of the City Planning Advisory Board by George W. Simons, Jr. Jacksonville, Fla. : Simons, 1931. Includes Supplement no. 1, Zoning map...of Jacksonville, Florida. Map of Jacksonville, Florida and vicinity...1928. (Maps in oversize map box 19). PALMM.

Road And Bridge Department And Jacksonville - St. Johns River (Toll) Bridge, Board Of County Commissioners Of Duval County, Florida

Books

A report by the Board of County Commissioners of Duval County Florida issued January 20, 1931, it includes statistics for roads: fund expenditures, maintenance costs, construction costs, maintenance cost of convicts, building costs, cost of shell and bonded indebtedness. It also includes statistics for the bridges and Toll bridge including expenditures, bonds, financial statements, bridge permits and toll permits. Arthur N. Sollee Collection - M84-1 Box 14 fold. 65b. PALMM

Test 195: Cletrac Model 40-30, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Some Of The Difficulties Encountered In The Construction Of A Highway Subway Or Underpass, Lawrence Halley Sanderson

Professional Degree Theses

"The project from which the subject for this work is taken is located in Section 28, T 13 N, R 11 W, of the third P. M., Scott County, Illinois, within the village limits of Manchester, in the north east part of the town. (Sheet No. 1 of accompanying plans) It is a grade separation between the Chicago and Alton Railway and Route No. 3 of the Illinois system of Highways"--Page 6.

Design Of A 2 Hp Repulsion Start Induction Motor, Joseph Worley

Professional Degree Theses

"The Repulsion Start Induction motor comprises a wound field or stator of laminated structure and a wound armature or rotor whose coils are connected to a commutator upon which brushes bear and function during the starting period. This motor operates as a repulsion motor during the starting period and at a predetermined speed the short circuiting device actuates and short circuits the commutator. The motor then operates as an induction or squirrel cage type. The starting torque of this type of motor is exceptionally high, generally 300% to 400% of full load torque. Consequently this type of motor is regarded …

Technical Methods Of Analysis For Mill Products, Daniel Elijah Huffman

Professional Degree Theses

"In mining and milling operations it is necessary that the assays be known as soon as possible, also that these results are more accurate than the sampling or the operation that produced the samples. This means that both speed and accuracy must be considered when selecting a method for the analysis of samples"--Technical Methods of Analysis, page 1.

Chemical Control -- Influence On Manufacture And Quality Of Cement, Joseph Owen Hunt

Professional Degree Theses

"Definition:- Portland cement may be defined as the product obtained by finely pulverizing clinker produced by calcining to incipient fusion an intimate and properly proportioned mixture of argillaceous and calcareous materials with no additions subsequent to calcination excepting water and calcined or uncalcined gypsum. While a review of Portland cement analysis would show a wide variation in chemical composition, it must not be supposed that such latitude in proportioning the raw material really exists. If the resulting Portland cement is to be sound, normal setting, and of good strength it is imperative that the raw materials shall be correctly proportioned …

Memorandum: Current Recording And Reporting Of Mortality And Salvage Data, Buildings, C.B. Central Office Equipment, Multiple Private Branch Exchanges, Wilbur Elihu Sheldon

Professional Degree Theses

"The purpose of this memorandum is to describe the methods and forms to be used in recording currently and reporting annually actual additions and retirements of Buildings, Common Battery Central Office Telephone Equipment, and Multiple Private Branch Exchanges, together with the making of certain periodic estimates of future additions and retirements, final dates of retirement, and probable net salvage at final retirement. All of these data are used in connection with the determination of depreciation rates for the classes of plant mentioned"--Section I. General, page 4.

Japan, Van Hoose Smith

Professional Degree Theses

"This ore is mined from a quartz vein which is refined by small seams of graphitic clay material, and the walls of the vein consist of a sort of graphitic shaley material. The above graphitic materials break down under treatment into a rather peculiar clay which was called primary colloidal slime. The milling process in use consists of stamp milling followed by the separation into sand and primary slime in Dorr Duplex Classifiers. The primary slime overflow from these classifiers, which is all practically thru 220 mesh, is thickened and treated by flotation. Normally and with a good supply of …

Gas Analysis By Measurement Of The Thermal Conductivity, Bertie Lee Browning

Professional Degree Theses

"Types of gas analysis. Methods for the analysis of gases may be divided into two general classes, physical and chemical. In chemical methods, a constituent of the gas mixture undergoes chemical reaction and the amount of the constituent is determined by change in volume or by supplementary chemical methods such as titration. The physical methods of analysis differ in that no chemical change takes place in the gas. Instead, a determination is made of some physical property which is related to the composition of the gas mixture. Some of the physical properties which have been used for purposes of analysis …

Proposed Method Of Ventilating The Frood Mine, Herman Jacob Mutz

Professional Degree Theses

"The Frood Mine lies about two and one half miles north of the City of Sudbury, Ontario. The Frood deposit was among the first discoveries in the district, but was not considered as a very important deposit until 1925, when a deep drilling campaign disclosed higher grade ore with depth"--page 3.

A Summary Of Operations And Practice At Shenandoah-Dives, Howard Histed

Professional Degree Theses

"The property of the Shenandoah-Dives Mining Company is located in the Animas Mining District, San Juan County, Colorado. The Mine is located on King Solomon Mountain, four miles east and one mile south of Silverton. Silverton is on a branch line of the narrow guage Denver & Rio Grande Western Railway, on which the nearest smelter is located at Durango, a distance of about fifty miles. Included in this report is a claim map showing all the claims and their relative locations"--Location of the Property, page 1.

Georgia Kaolin As The China Clay Constituent In Floor And Wall Tile Bodies, Alfred Arthur Mitchell

Bachelors Theses

"The replacement of the China Clay content in vitreous floor tile and porous wall tile bodies wholly by Georgia sedimentary kaolin would reduce the cost of these bodies being used in our floor and wall tile plants at present. This plastic kaolin is available in large quantities in the State of George, covering an area of about 7500 square miles. It is the intention of this work to substitute this American Clay for the more costly imported English China Clay now being used"--Introduction, page 1.