Engineering Commons^™

A Five Dimensional Field Theory., Scott Holzhauser

Electrical and Computer Engineering ETDs

Several authors in the past have utilized the five dimensional manifold to accomplish their ends, as the next few sections explain. The ends are frequently different, however, Corben1,2 relates his fifth dimensional variables to rest quantities, such as the "rest mass density" and "rest charge density." Flint3,4,5 uses x as an unobservable 5 cyclic coordinate, and Ingraham6 interprets x as a "parameter of finiteness" that keeps finite the usual field quantities.

Analysis Of Steady State Heat Flux Measurement By The Initial Slope Technique, Charles Earl Cartmill

Theses and Dissertations

The impulse technique is progressively being developed for determining the steady state rate of heat transfer systems involving exponential temperature-time histories. A pulse thermocouple system has been utilized in such a technique having a steady state response time on the order of one time constant of the thermocouple used. When an impulse thermocouple system is not used, the required time in obtaining the steady state value is on the order of five time constants or the time required to reach steady state.

An Acoustic Antenna With A Hollow Searchlight Pattern, Thurlow W.H. Caffey

Electrical and Computer Engineering ETDs

Economy, repeatibility, and convenience make it desirable to model a radar system by means of an acoustic system. The modeling is based upon the fact that, in a lossless medium, both EM-waves and acoustic waves obey a traveling wave equation of the same form. Furthermore, the field components of a plane wave in each system are related to each other by equations of the same form.

Adaptive Communication Systems, Arthur M. Breipohl

Electrical and Computer Engineering ETDs

The purpose of this study is to investigate an "adaptive" communication system in order to characterize the elements of adaptation. Although the term "adaptive" does not have a universally accepted meaning in the technical literature, it is usually applied to systems that have a significant ability to adjust their performance automatically over relatively wide variations in environment. In this sense almost any feedback system is adaptive, but the term is usually reserved for the more exotic systems which appear to make a deliberate effort to monitor the environment and then adjust their performance. Man is usually taken as the primary …

6th Annual Rocky Mountain Spectroscopy Conference Program

Rocky Mountain Conference on Magnetic Resonance

Program from the 6th annual meeting of the Rocky Mountain Spectroscopy Conference, sponsored by the Rocky Mountain Section of the Society for Applied Spectroscopy. Held in Denver, Colorado, August 12-13, 1963.

6th Annual Rocky Mountain Spectroscopy Conference Abstracts Of Papers

Rocky Mountain Conference on Magnetic Resonance

Abstracts of papers presented at the 6th annual meeting of the Rocky Mountain Spectroscopy Conference, sponsored by the Rocky Mountain Section of the Society for Applied Spectroscopy. Held in Denver, Colorado, August 12-13, 1963.

6th Annual Rocky Mountain Spectroscopy Conference Reply Card

Rocky Mountain Conference on Magnetic Resonance

Reply Card for the 6th annual meeting of the Rocky Mountain Spectroscopy Conference, sponsored by the Rocky Mountain Section of the Society for Applied Spectroscopy. Held in Denver, Colorado, August 12-13, 1963.

Status Report On Landslide Area On I-75, Covington, Kentucky [August 1963], Robert C. Deen

Kentucky Transportation Center Research Report

This report has been prepared to describe the conditions of the landslide area on Interstate Route I-75 in Covington, Kentucky, since May 15, 1963, the date of an earlier status report. Subsurface data which has been collected and assembled during the past three months is also included. Possible corrective considerations have also been included in this report.

The rainfall data included in this report, as well as the previous status report (May 15, 1963), are the official 24-hour precipitation recorded by the U. S. Weather Bureau at the Greater Cincinnati Airport in Boone County, Kentucky. The airport is located approximately …

Non-Ferrous Metal Mining And Smelting In Australia

School of Mines and Metallurgy Bulletins

Bulletin was published without an Abstract

The Irish Plumber And Heating Contractor, August 1963 (Complete Issue)

Building Services Engineering

No abstract provided.

Heat Flux Measurement By Miniature Calorimeters, Gary Rex Coffin

Theses and Dissertations

During recent years an increasing number of technical firms and manufacturers have begun to specify heat flux, energy input per unit area per unit time, as a testing and designing criteria. This change in the boundary condition (to heat flux from temperature excess or others) evolved from the idea that each material has a characteristic burning temperature. Therefore, the rate of ablation or burning depends mainly upon the rate of energy input into the specimen, and not its temperature. Thus, the need for a flux measuring device became more acute.

Radiant Flux Distribution From Concave Radiation Sources, Richard K. Duke

Theses and Dissertations

In order to analyse the radiant heat transfer characteristics of a concave source, two vital concepts must be clearly understood. The first is called the apparent emissivity Ea and is a function of both the local total emissivity E and of the geometry of the source. Although the total emissivities of ordinary substances range between zero and one, the two extremeties never occur. Surface emissivities which approach these values in the limit, must be created mechanically from materials in the range 0

The Aerodynamic Drag On Spheres Under Acceleration, Charles Earl Nielson

Theses and Dissertations

The requirement of a greater understanding of the behavior of solids-gas systems has shown itself profoundly with the advancement of science and technology during recent years. The range and variety of processes in which these systems play an important role is exceptionally broad. These processes range from meteorological disturbances such as dust storms, rain and snow, to the use of vacuum cleaning equipment. With the advancement of aircraft and space technology the influence of these systems is again felt in such cases as the motion of rockets, missiles and aircraft in flight, the behavior of liquid droplets or metallic particles …

The Verification And Use Of A Hot-Wire Anemometer In Turbulence Measurements, Charles Young Warner

Theses and Dissertations

One very important part of research is the development of effective, reliable instruments. The measurement of turbulence in flow fields is a complex research problem. It depends heavily upon the hot-wire anemometer. This thesis describes the evaluation and use of a constant- current hot-wire anemometer, and presents the equations governing its use for turbulence measurements. The thesis first enumerates and explains some of the important parameters of turbulent flows, providing the basis for the discussion of their measurement which follows. The cooling of a heated wire in forced convection and a typical anemometer circuit are discussed. Derivations of the instrument …

Design And Fabrication Of An Apparatus To Determine Heat Transfer Coefficients In An Air-Particle Mixture Over A Horizontal Flat Plate At Uniform Temperature, Louis G. Hunter Jr.

Theses and Dissertations

The study of two phase flow, where a finely divided solid is suspended in a fluid medium, has received considerable attention in the last five years due to the increased number of systems in which this phenomena occurs. The two most important areas involving the gas- particle mechanism are nuclear reactor heat exchangers and liquid and solid rockets.

Study Of Aerodynamic Forces On An Unsymmetrical Body As It Is Oscillated In A Air Stream, David Rees Tree

Theses and Dissertations

The object of this work was to design and build equipment to measure the aerodynamic forces which will cause self-induced oscillations of a body having an unsymmetrical cross-section, such as a D-section. This self-induced oscillation has been called "stall flutter" or in electrical transmission lines, "galloping-transmission lines." It is hoped that this equipment will be used to gain basic Information about these aerodynamic forces.

Computation Of The Dipole Moment Of A Coaxial Antenna In Sea Water., Richard B. Reinman

Electrical and Computer Engineering ETDs

The purpose of this paper is to develop a meaningful expression for the dipole moment in dissipative medium. Since the dipole moment is dependent on the current distribution which in turn is a function of system parameters, and might well start with determination of the input impedance. Two of the most popular methods for determining input impedance to a radiator in an air medium are 1) the induced emf method, and 2) a method whereby the power flow across a spherical surface is calculated as the radius of the sphere becomes infinite. Both methods assume a current distribution; only the …

Astronaut Activity Involving Pete Conrad, Elliot See, Thomas Stafford And Ed White, Nasa

Videos

Astronaut Activity Involving Pete Conrad, Elliot See, Thomas Stafford and Ed White

• This item documents the time period of July 8, 1963–July 12, 1963.

Aerial Application Of Evaporation-Reducing Chemicals, Development And Evaluation Of Equipment And Techniques, C. Earl Israelsen, Vaughn E. Hansen

Reports

Aerial applications of both liquid and powder evaporation retardants have been made in parallel strips on large lakes for purposes of comparison. Films formed from powder spread more rapidly than did those from liquid, but usually both films ultimately spread to approximately equal widths and had the same degree of compression as determined with indicator oils. Evaporation retarding materials with large numbers of particles having diameters smaller than 75 microns are greatly affected by the wind. As the chemical is dispensed from the airplane. the fine particles drift with the wind and in some instances are carried onto the land …

The Irish Plumber And Heating Contractor, July 1963 (Complete Issue)

Building Services Engineering

No abstract provided.

A Study Of The Fatty Alcohol-Epichlorohydrin Reaction, Roy Henry Schaufelberger

Theses

The reaction between "Lorol" 5 fatty alcohol and epichlorohydrin was found to proceed at a rate which could easily be followed, at temperatures of 80 to 140°C, when catalyzed with 0.05 percent of a boron trifluoride ether-ate catalyst, based on the total weight of reactants. The reaction was followed by determining the decrease in epichlorohydrin concentration with time using standard analytical techniques.

Kinetic studies showed that the fatty alcohol/epichlorohydrin reaction was not a simple pseudo first order or second order reaction but rather a complex one probably composed of:

1. A second order reaction between primary fatty alcohol and epichlorohydrin. …

Prediction Of Extruder Performance For Thermoplastic Materials, Aldo Bergonzoni

Theses

The object of this thesis was to predict the output of an extruder, for thermoplastic materials, by using simplified equations relating output to screw speed and screw geometry.

Three different extruders were used for this purpose and several addition-type polymers were studied. These materials included: stabilized and unstabilized polypropylene, low-density and high-density polyethylene, general-purpose polystyrene and rubber-modified poly-styrene.

The results obtained show that, by using relatively low screw speeds (up to 140 r.p.m.), shallow screw channels and back pressures at the die up to 2000 psig., a theoretical output can be calculated with a maximum deviation from the experimental data …

The Electrical And Optical Properties Of Organic Semiconductors. Part 1 : Preliminary Survey And Purification Techniques, Bohdan Robert Czorny

Theses

The purpose of this work was to investigate the field of organic semiconductors and in particular to develop the means for preparing these materials in suitable condition for measurement and study of semiconducting properties. The first aspects of this project concerned with a preliminary survey of the field and techniques of ultra purification are covered in this work.

Anthracene was selected for investigation because it is the organic semiconductor most commonly studied by other investigators, and considerable published information exists for corroboration.

The preliminary survey elucidated the most promising methods of purification, which were chemical synthesis, sublimation, recrystallization from solvents …

Electromotive Deposition, Storage And Dissolution Of Active Hydrogen Upon Carbon Electrodes, Joseph Gabriel Di Masi

Theses

The electromotive deposition, storage and dissolution of hydrogen upon carbon electrodes having real surface areas varying from one meter²/ gram to one-hundred ten meters²/ gram vas inves-tigated.

It has been found that a correlation exists between hydrogen storage and real area of the inner electrode. However, it has been further shown that storage of electromotive hydrogen is only for short periods of time, that is, several hours.

Application Of Transient Response Analysis To An Automatically Controlled Liquid Level System, Armando Anthony Gregoli

Theses

System instability or poor control are problems which occur in commercial automatically controlled liquid level installations. A simple level control system was constructed to define the parameters which affect a level control system response. Special problems which occur in commercial installations were evaluated.

The system parameters were defined. To simplify the mathematical analysis, a negligible measurement and controller time constant were assumed. These were later shown to be reasonable assumptions. Transfer functions were derived for each component and were used to describe the system response. The system response was predicted by transient response analysis and compared with experimental results. An …

The Design And Fabrication Of A Cell To Measure The Thermal Conductivity Of Viscous Fluids, Donald William Hagedorn

Theses

The purpose of this investigation was to design and construct a device to measure the thermal conductivity of viscous fluids. The thermal conductivity data obtained with this device will be used in later work on predicting film coefficients of heat transfer to non-Newtonian fluids.

A cell of the concentric cylinder type was fabricated. Main features of the cell are: two concentric bronze cylinders separated by a 1/8 inch annular space, a central water capable of producing a 10° C temperature gradient in the annular space, and two guard heaters on individual rheostats to control the end looses. The temperatures are …

Separation Of Mononitrotoluenes By Clathration, Eugene Ivashkiv

Theses

Thirty-one Werner-type compounds have been prepared, at least 10 of which were not previously investigated. Manganus tetra(4-methylpyridine)dithiocyanate, zinc tetra(4-methylpyridine)dithiocyanate, ferrous tetra(4-methylyridine)dithiocyanate, nickel tetra(4-methylpyridine)dithiocyanate and nickel tetra(pyridine) dithiocyanate can be used for clathration of mononitrotoluenes. The best results have been obtained with the complex formed between nickel dithiocyanate and l-methylpyridine. Three clathration stanges are needed to obtain 99 percent pure para-nitrotoluene. A clathration efficiency of 60 percent has been achieved per stage. A new process for the recovery of clathrated compounds has been developed. Clathration can be carried out as a cyclic process without the complex consumption when the developed method …

The Corrosiveness Of Phenols, Edgar George Kaup

Theses

The effects of oxidizing agents, heat, light, and metallic catalysts on coloration in phenols is discussed, using data collected from the literature. The oxidation reaction is concluded to be the con-trolling factor in coloration. Corrosion data from laboratory experiments, field tests, and operating plants is presented for metals and non-metals in concentrated phenolic systems.

A Correlation Of Viscosity Of N-Paraffin Hydro-Carbons, Sheldon Krueger

Theses

A linear relationship between the Log viscosity and the Log vapor pressure is shown to exist for each n-paraffin hydrocarbon from C₃ to C₂₀. The average error of these equation e is ± 1.5 per cent of the American Petroleum Institute's¹ experimental values. The use of individual slopes for each equation is shown to be store accurate than one alone for all the viscosity data. These slopes e:thibit an unusual behavior by having a minimum value at undecane.

The slopes and intercepts are correlated with carbon number (the number of atoms in a n-paraffin Chain). These …

Slow Compression Crushing Of Glass In Fluids, Peter Joseph Lucchesi

Theses

Generally only a small fraction of the energy used in crushing, on the order of 1 or 2%, appears as new surface energy in the product. The purpose of this work was to determine if higher efficiencies could be achieved by the use of different fluids surrounding the particle during crushing.

Single particles of solid glass cylinders, standing on. end, were crushed by slow compression in the presence of air, water, methanol, carbon tetrachloride, and glycerol. No effect was found with the various fluids even when considerable pressure was developed in the surrounding fluid in some of the glycerol experiments. …