Engineering Commons^™

Ignition Time Lag: A Measure Of Explosive Energy Release, Paul H. Rydlund

Masters Theses

"By means of the resistance-element, or probe-wire, detonation-velocity measurement technique, explosive reactions from various blasting agents were studied. To reduce the number of variables, only standard AN-FO 94/6 mixtures were used, as are commonly employed today in constructions and mining operations. Accuracy of the data obtained was excellent, and the method proved itself not only relatively simple to operate but versatile in providing considerable information under many testing conditions. Studies of test records revealed the presence of a time-lag frequently occuring [sic] after primer detonation. Environmental factors such as confinement, charge diameter, primer size and energy content, and surface coatings …

Thermal Resistance Of Bonds And Contacts, David Marion Lewis

Masters Theses

"The adhesive and sealant Industry has more than kept pace with our rapidly expanding technology of today. This growth has left the standardization of data on adhesives far behind and lack of this data is obvious. Of the many applications, particularly as related to space technology and energy conversion, the resistance to the flow of heat offered by the bond layer is of considerable importance.

Little information is available on the effect of adhesives on heat transfer. In connection with their work on honeycomb panels, Rankle, Gier, and Bevans (7) determined the thermal resistance of the particular type of adhesives …

The Indole Acetic Acid Oxidase Of Hygrophorus Conicus., Dilip N. Patel

Masters Theses

"The purpose of this investigation was to determine an assay method for measuring the activity of the indole acetic acid oxidase present in Hygrophorus conicus. This enzyme converts tryptamine or indole acetic acid (IAA) into oxindole acetic acid (OIAA).

An assay method for measuring the activity of the enzyme was developed based on the spectrophotometric measurement of tryptamine, IAA, and OIAA. Several other assay methods were tried. The colorimetric method of Gordon and Weber ^(l4) was found to be useful for a quantitative determination of IAA and was insensitive to OIAA. Paper chromatography proved to be useful as a qualitative …

A New Method For The Evaluation Of Metal Primers., Bhalchandra Dave

Masters Theses

"Corrosion is the destructive attack of metal by chemical or electrochemical reaction with its environment. Rusting is usually the term applied to the corrosion of iron-base alloys with formation of corrosion products consisting largely of hydrous ferric oxides. Non-ferrous metals therefore, corrode but do not rust. ^(l4) More than 40 per cent of the world's production of steel and iron is destroyed by rusting which costs about six billion dollars every year. In 1954 the American Petroleum Industry, Subcommittee on Corrosion, published a preliminary estimate that corrosion was costing 2 the petroleum refining industry between eleven and nineteen cents per …

The Effects Of Granular Size On The Thermal Conductivity Of Sand, Kanubhai M. Patel

Masters Theses

"The thermal conductivity of granular materials can be determined by the Thomas method. This method was used here to determine the effects of granular size on the thermal conductivity of sand. A river sand was secured and screened. The sand retained between the Tyler Standard Screen Scale, mesh 10 and 14, 14 and 28, 28 and 40, 40 and 48, 48 and 60, and below mesh 60, was used for tests.

The thermal conductivity for the above six samples obtained by the author coincide fairly well with published data.

It is reported in the International Critical Tables that the thermal …

Optimum Zero-Memory Nonlinear Filter, Benjamin Shaw-Hu Wang

Masters Theses

“The purpose of this report is to review the basic work described by Zadeh insofar as systems of class N₁ are concerned and to apply his general results to a specific problem in which a non-linear filter is mandatory simply because the linear filter is essentially ineffective. The ineffectiveness stems from the fact that the autocorrelation function of the signal plus the noise has essentially the same variational character as the signal alone. Therefore, the transfer function of the linear filter turns out to be simply a constant. Thus, the output of the linear filter is just an attenuated …

A Laboratory Study Of The Effect Of Wettability Of Residual Oil Saturation In Artificial Cores., Socrates Nicholas Potamianos

Masters Theses

"In the past much emphasis has been placed on various studies of reservoir rock and fluid surface properties and their relation to the different oil recovery processes. Several laboratory methods (1, 2, 3) ^l/have been used by different investigators to obtain a more fundamental understanding of the many factors which have an influence on the oil recovery from reservoir rocks"--Introduction, p. 1

Design, Construction And Characterization Of A 10-Liter Batch Pilot Plant Fermentor., Sylvester Ogden

Masters Theses

"A 10-liter batch type pilot plant fermentor has been designed and constructed. The design incorporated most of the desirable features of previous designs reported in the literature.

The stainless steel fermentor has a multi-speed agitator and aeration rates as high as 15 cubic feet per hour. Temperature indicating, temperature controlling, pH measuring, and automatic foam controlling systems are included in the design.

Sulfite oxidation rates have been determined for the unit at 15 operating conditions. A maximum sulfite oxidation rate of 1060 millimoles of oxygen per liter per hour has been obtained.

Fermentation using a Torulopsis utilis yeast culture has …

Investigation Of Zero Sidesway For Rigid Frames, Dolatray S. Mehta

Masters Theses

"This study was made to determine the location of a point at which a vertical load may be applied to a rigid frame structure and produce zero sidesway, the so called zero sidesway axis. For concentrated loads equations have been derived for zero sidesway. For uniform and triangular loads graphs showing zero sidesway for various ratios of column and beam stiffnesses and height ratios have been plotted"--Abstract, page ii.

The Characteristics Of Radial Strain Propagation Induced By Explosive Impact In Jefferson City Dolomite., Choon K. Quan

Masters Theses

"Blasting effects depend largely on peak radial strains propagated in rock media by explosive impact. To improve blasting design and control of secondary effects (e.g., structural fatigue), an equation for peak radial strain propagation induced by explosions was developed as follows: Emax = K e^-αr /r

An instrumental technique was designed to test the validity of the equation in the Jefferson City dolomite. Results showed ii that for 1-lb charges of 60% ammonia-gelatin explosive, peak strains, at any distance r, were reduced in amplitude in accordance with an exponential decay function of the type Emax = 281 e^{-0.026r …}

Microscopic Observations On Etched Surfaces Of Zinc Single Crystals And On Anodic Disintegration., Yun Wang

Masters Theses

"The technique used to grow single zinc crystals was based on the Bridgman method. Zinc-gold, zinc-aluminum, and zinc-magnesium alloys were prepared and their single crystals were grown. Four crystallographic planes of the single zinc crystals were used for both chemical and anodic etching. The zinc alloys were etched more easily by acids than the purest (99.999%) zinc. The etching patterns changed for the different crystallographic planes of the single zinc crystals.

The appearance of particles during anodic dissolution of the single zinc crystals depended on time, acid concentration and current density. The partial disintegration of single zinc crystals is promoted …

The Effect Of An Induction Field On Transducers., Ratilal S. Patel

Masters Theses

"This report presents the results of an experimental investigation on the effect of an induction field on transducer output. Various types of transducers; strain gages, thermocouples, and thermistors, were used. The changes in the output of these transducers were measured for various induction field conditions.

Measurements must often be made where strong electrical fields are present. Strain gages are used to measure the stresses in electrical machinery. Thermocouples and thermistors used for measuring the temperature of materials undergoing heat treatment with an induction heater are also subjected to an induction field.

The general experimental procedure was the same throughout the …

Stiffness Of Lightweight Reinforced Concrete Beams, Rameshchandra H. Patel

Masters Theses

"This work is a presentation of the findings of an experimental measurement of stiffness (El) for reinforced and nonreinforced lightweight and normal concrete. The experimental values of stiffness are compared with values obtained using standard reinforced concrete theory. In all, thirty beams, fifteen for lightweight and fifteen for normal concrete, each having the compressive strength of approximately 4, 500 psi, were tested. In addition to stiffness measurements, a relationship was obtained between the dynamic modulus of elasticity and the ultimate compressive strength at various ages for the particular lightweight concrete used"--Abstract, page ii.

Influence Of The Heat Release On Thermodynamic Characteristics Of Diesel Engines., Shirish Amritlal Desai

Masters Theses

"A Diesel. engine is an internal. combustion engine in which the fuel. is ignited by the heat of compression. Thus, the Diesel. engines are known as compression-ignition (C.I.) engines. The engine received its name: from its inventor, Dr. Rudolf Diesel., who in 1893 published a book under the title, '' Theory and Construction 0£ Rational. Diesel Engine". The first successf'u1 Diesel. engines, using liquid: fuel., which was injected into the cylinder by a blast of high-pressure air, were manufactured by the M.A.N. Company of Germany in 1895"-- Introduction, p. 1

Effect Of Poly-Ethylene Glycol, A Non-Shrinking Agent, On Strength Properties Of Concrete., Vasantrai Vallabhbhai Desai

Masters Theses

"This thesis describes laboratory test made on plain concrete cylinders and ~earns for compressive strength, flexural strength, durability and shrinkage, using poly-ethylene glycol (ElOOO) as a non-shrinking admixture. The tests were conducted in the Materials Laboratory of the Civil Engineering Department.

The test results show that poly-ethylene glycol has the effect of reducing the compressive and flexural strength of plain concrete. The admixture also has the effect of reducing shrinkage, and reversing it, causing expansion with large percentage of its use. For the number of cycles of alternate freezing and thawing reported the admixture did not have any effect on …

Artifact Filter., Kent William Swearingen

Masters Theses

"Peripheral blood pulse monitors are highly susceptible to noise-artifact-- in their present stage of development. The purpose of this thesis is to demonstrate a feasible means for filtering the artifact, using existing monitors. Since no peripheral pulse monitor (transducer) was available for experimentation, a simulated test input was devised with frequency variations from JO cycles/minute to 1.50 cycles/minute.

The filtering circuit predicts the time location of each input pulse. The location of the prediction is governed by the accuracy of the preceding prediction. This is controlled by an R-C timing circuit with a Schmitt Trigger and relay.

From the data …

Development Of A Fluor-Mica Dielectric Using Glass-Ceramic Fabrication Methods., James Joseph Tuzzeo

Masters Theses

"A tetrasilicic fluor-mica, K₂Mg₅si₈o₂₀F₄, was synthesized using glass-ceramic fabrication methods. Bubbles, rods, and disks of glass-mica were formed, and heat treated at selected temperatures between 620°c and 1160°c for various time periods. Density changes were correlated to mica content to determine the relative amounts of crystalline mica phase precipitated after heat treatment. Dielectric losses and dielectric constants of the glass-mica disks were measured for correlation to mica content"--Abstract, p/ ii

Properties And Perfection Of Zr-H Solid Solutions At Room Temperature., Dirk Heinrich Wiebe

Masters Theses

"The lattice constants of α. - Zr with 122 ppm H are a₂₅ = 3.23622 ± o. 00005 Å and c₂₅ = 5 .1526 ± 0. 0003 Å. The thermal expansion coefficients of α - Zr are found to be α_a =4.6 x 10^-6(⁰C^-1) and α_C =11,0 x 10^-6(⁰C^-1) in the range between 15 and 55°c.

The solid solubility limit in the Zr - H system at room temperature and independent of the H pressure was determined by the parametric x-ray method to be …

The Effect Of Gap Graded Aggregate On The Properties Of Hot Mix Asphaltic Concrete, Maurice L. Northcutt

Masters Theses

"The objective of this investigation was to determine the effects of deviations from the recommended gradation of aggregate upon asphalt concrete mixes. The aggregate used in this study was a good grade Missouri Limestone and was mixed with an asphalt cement of 85-100 penetration grade. A control mix was designed in accordance with the Marshall Method using a gradation recommended by the Asphalt Institute. Ten aggregate blends were prepared by wasting certain fractions or combinations of fractions and the wasted weights were redistributed into the coarser or finer aggregate sizes. The test mixes were designed using the same method and …

The Importance Of Radiation As A Means Of Controlling Surface And Internal Temperatures Of A Semi-Infinite Solid, Kenneth C. Woodruff Jr.

Masters Theses

"This problem is concerned with the temperature history of a semi-infinite solid bounded by one flat surface.

Heat was applied by convection from a hot fluid to the flat surface of the solid which was originally at a uniform temperature. Heat was radiated from the flat surface to black space and conducted into the solid according to Fourier's law. The temperature at the surface, and at several points beneath the surface, was determined as a function of time.

A method for solution of such a problem is demonstrated here by the use of numerical analysis and the Royal McBee LGP …

Study Of Mass Transfer In Oscillating Droplets., Subhash Vishnu Gangal

Masters Theses

"The object of this investigation was to study the resistance to mass transfer inside single oscillating liquid droplets falling in a liquid medium. The following four systems were studied: (1) 3% acetic acid in nitrobenzene and water, (2) 25% acetic acid in nitrobenzene and water, (3) 3% acetic acid in nitrobenzene and glycerin in water, and (4) benzyl alcohol and water. The individual mass transfer coefficients were computed by using the Handlos and Baron relation and were compared with the experimentally determined dispersed phase mass transfer coefficients. The average absolute deviation of the observed values of dispersed phase mass transferred …

The Prediction Of The Thermal Conductivity Of Various Binary Non-Polar Gaseous Mixtures., Chester Foon-Chen Feng

Masters Theses

"A simple method for predicting the thermal conductivity of binary non-polar gaseous mixtures from the force parameters of the pure components and composition was developed. The method is an extension of the application of the combining methods previously derived for viscosity predictions. Altogether, the published thermal conductivities of 683 binary non-polar mixtures at various temperature levels were compared with the corresponding calculated thermal conductivities resulting from the prediction method. The corresponding values predicted from Hirschfelder, Curtiss and Bird's expression were also compared.

Among the 683 binary mixtures, there were 138 di-di, di-poly, and poly-poly mixtures, 241 mono-

Determination Of The Shapes Of Fixed And Moving Polodes Of Class Ii Four Bar Mechanisms., Manharkumar Kantilal Sheth

Masters Theses

"The purpose of this thesis is to determine the shapes of fixed and moving polodes of class II four bar mechanisms, since there has been little, or no work done in determining their shapes.

Twenty different mechanisms were taken to study the shape of the fixed and moving polodes. The best equation which fits each curve was found by using the least square method in polynomials. Coefficients for each curve were determined with the help of the I.BM 1620 computer. The equation was found to be a six-degree polynomial which fits very well to each curve. There seems to be …

Application Of An Orifice Meter To Fan Testing., J. F. T. Agapito

Masters Theses

"In this investigation the application of an orifice meter to fan testing was studied and evaluated. An orifice meter was designed and was installed in a centrifugal fan duct. Measurements were checked and compared with those of a standard pitot-tube traverse and were found to be in very close agreement. It is suggested that a meter of this type could easily be adapted not only to laboratory work but also to field tests"--Abstract, p. ii

A Study Of The Stabilization Of Putnam Silt Loam With Large Organic Cations, George C. Bennett Jr.

Masters Theses

"Laboratory tests were conducted to determine if Aliquat, a quaternary ammonium chloride compound, could be used to change the physical properties of Putnam silt loam. The effects of adding varying amounts of Aliquat to the soil were measured in terms of the results of Atterberg limits tests, the moisture-density relationship, unconfined and triaxial compressive strength, and capillary adsorption characteristics. A small change in the Atterberg limits, the optimum moisture content, and the maximum dry density was noted. An increase in the unconfined compressive strength and a reduction in the moisture adsorption potential was accomplished by the addition of 0.25 and …

The Effect Of Surface Roughness, Cure Pressure, And Temperature Level On The Thermal Resistance Of Bonds And Contacts, David Leo Schwaller

Masters Theses

"This investigation was conducted to determine the thermal effect of temperature level, surface roughness, and curing pressure on bars and bonded interfaces.

The equipment used in this investigation is shown in Fig. 1 and Fig. 2. The four specimens used, cylindrical aluminum alloy bars, were cut radially at their midpoints and faced on a lathe. Heat was supplied by an electrical resistance heating element and an ice bath was used to conduct heat from the alloy specimen. A heat shield was used to insure one dimensional heat flow. Spacers were placed in the insulation at the top, the interface, and …

The Effect Of The Static Compaction On The Mechanical And Physical Properties Of Asphalt Concrete Hot-Mixes, Abdel-Gawad A. Bahgat

Masters Theses

"The objective of this investigation was to study the effect of the static compaction effort upon the physical and mechanical properties of asphalt concrete hot mixes. To study the effect of the static compaction upon the physical properties of the asphalt mixes, six mixes were prepared using hard, well graded crushed limestone as an aggregate, blended with an 85-100 penetration grade asphalt cement. The control mix was prepared and tested in accordance with the Marshall method for mix design. The other five mixes were prepared and tested using the same procedures of Marshall except for compaction, where five different static …

A Study Of The Crystallographic Orientation Dependence Of Electrical Resistivity In Zinc, Paul Frederic Becher

Masters Theses

"A potentiometer and galvanometer setup was used to obtain electrical resistivity data for polycrystalline zinc. Cold working textures were investigated by the reflection technique with a quadrant x-ray spectrometer.

Resistivity data were obtained for specimens that were reduced up to forty per cent from the as received condition, and the corresponding textures were studied. The results indicated that the resistivity change in the rolling direction is due to the reorientation of the c-axis in the rolling caused by cold working"--Abstract, page ii.

Determination Of Transient Temperature Stresses In Plates, Teh Yu Hu

Masters Theses

“The purpose of this thesis is to determine the transient temperature stresses in two-dimensional plate structures restrained against rotation at the ends but not restrained against elongation. In this investigation, only one-dimensional heat flow is considered. The heat flow is first treated as a problem in pure conduction and then the effects of convection through a boundary layer are considered.

The differential equation of transient heat conduction is solved by Fourier series and Duhamel’s theorem, and a graphical method of solution for temperatures in terms of dimensionless parameters is presented.

Solution of this problem is valid for a semi-infinite plate …

Highway Impact Studies: Impact Of Lebanon By-Pass, 1950 To 1963 : Progress Report, Ronald Jerome Hensen, Harold L. Michael, Judson Stillman Matthias

JTRP Technical Reports

No abstract provided.